Update autotools-generated files

via autoreconf.

5 files changed, 227 insertions, 197 deletions

diff --git a/Makefile.in b/Makefile.in
index 6d75ace..dba08b1 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -15,6 +15,23 @@
 
 @SET_MAKE@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -55,6 +72,11 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -281,11 +303,18 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-man1: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
-	@list=''; test -n "$(man1dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.1[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -317,11 +346,18 @@ uninstall-man1:
 	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
 install-man5: $(man_MANS)
 	@$(NORMAL_INSTALL)
-	test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
-	@list=''; test -n "$(man5dir)" || exit 0; \
-	{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.5[a-z]*$$/p'; \
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
 	} | while read p; do \
 	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 	  echo "$$d$$p"; echo "$$p"; \
@@ -534,13 +570,10 @@ distdir: $(DISTFILES)
 	done
 	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
 	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 	    $(am__relativize); \
 	    new_distdir=$$reldir; \
@@ -626,7 +659,7 @@ distcheck: dist
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	chmod -R a-w $(distdir); chmod u+w $(distdir)
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
diff --git a/aclocal.m4 b/aclocal.m4
index 59aa29e..8329ff7 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,4 +1,4 @@
-# generated automatically by aclocal 1.11.3 -*- Autoconf -*-
+# generated automatically by aclocal 1.11.6 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
 # 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
@@ -14,8 +14,8 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
-[m4_warning([this file was generated for autoconf 2.68.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
@@ -38,7 +38,7 @@ AC_DEFUN([AM_AUTOMAKE_VERSION],
 [am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.11.3], [],
+m4_if([$1], [1.11.6], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -54,7 +54,7 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.11.3])dnl
+[AM_AUTOMAKE_VERSION([1.11.6])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
diff --git a/configure b/configure
index 1f5cae4..0bcd3ce 100755
--- a/configure
+++ b/configure
@@ -1,13 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for Active port forwarder 0.8.4.
+# Generated by GNU Autoconf 2.69 for Active port forwarder 0.8.4.
 #
 # Report bugs to <jeremian@poczta.fm>.
 #
 #
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
 #
 #
 # This configure script is free software; the Free Software Foundation
@@ -155,6 +153,31 @@ export LANGUAGE
 # CDPATH.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
 if test "x$CONFIG_SHELL" = x; then
   as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
@@ -188,7 +211,8 @@ if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
 else
   exitcode=1; echo positional parameters were not saved.
 fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
   as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
   as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
   eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
@@ -233,21 +257,25 @@ IFS=$as_save_IFS
 
 
       if test "x$CONFIG_SHELL" != x; then :
-  # We cannot yet assume a decent shell, so we have to provide a
-	# neutralization value for shells without unset; and this also
-	# works around shells that cannot unset nonexistent variables.
-	# Preserve -v and -x to the replacement shell.
-	BASH_ENV=/dev/null
-	ENV=/dev/null
-	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-	export CONFIG_SHELL
-	case $- in # ((((
-	  *v*x* | *x*v* ) as_opts=-vx ;;
-	  *v* ) as_opts=-v ;;
-	  *x* ) as_opts=-x ;;
-	  * ) as_opts= ;;
-	esac
-	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
 fi
 
     if test x$as_have_required = xno; then :
@@ -350,6 +378,14 @@ $as_echo X"$as_dir" |
 
 
 } # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
 # as_fn_append VAR VALUE
 # ----------------------
 # Append the text in VALUE to the end of the definition contained in VAR. Take
@@ -471,6 +507,10 @@ as_cr_alnum=$as_cr_Letters$as_cr_digits
   chmod +x "$as_me.lineno" ||
     { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
   # original and so on.  Autoconf is especially sensitive to this).
@@ -505,16 +545,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -526,28 +566,8 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -1178,8 +1198,6 @@ target=$target_alias
 if test "x$host_alias" != x; then
   if test "x$build_alias" = x; then
     cross_compiling=maybe
-    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
-    If a cross compiler is detected then cross compile mode will be used" >&2
   elif test "x$build_alias" != "x$host_alias"; then
     cross_compiling=yes
   fi
@@ -1421,9 +1439,9 @@ test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 Active port forwarder configure 0.8.4
-generated by GNU Autoconf 2.68
+generated by GNU Autoconf 2.69
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 
@@ -1555,7 +1573,7 @@ $as_echo "$ac_try_echo"; } >&5
 	 test ! -s conftest.err
        } && test -s conftest$ac_exeext && {
 	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
+	 test -x conftest$ac_exeext
        }; then :
   ac_retval=0
 else
@@ -1809,7 +1827,7 @@ This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by Active port forwarder $as_me 0.8.4, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   $ $0 $@
 
@@ -2224,7 +2242,7 @@ case $as_dir/ in #((
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -2393,7 +2411,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2433,7 +2451,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_STRIP="strip"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2484,7 +2502,7 @@ do
   test -z "$as_dir" && as_dir=.
     for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
 	     'mkdir (GNU coreutils) '* | \
 	     'mkdir (coreutils) '* | \
@@ -2537,7 +2555,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_AWK="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2715,7 +2733,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2755,7 +2773,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="gcc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2808,7 +2826,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2849,7 +2867,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2907,7 +2925,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -2951,7 +2969,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -3397,8 +3415,7 @@ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
 /* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
 struct buf { int x; };
 FILE * (*rcsopen) (struct buf *, struct stat *, int);
@@ -3829,7 +3846,7 @@ do
     for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+      as_fn_executable_p "$ac_path_GREP" || continue
 # Check for GNU ac_path_GREP and select it if it is found.
   # Check for GNU $ac_path_GREP
 case `"$ac_path_GREP" --version 2>&1` in
@@ -3895,7 +3912,7 @@ do
     for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+      as_fn_executable_p "$ac_path_EGREP" || continue
 # Check for GNU ac_path_EGREP and select it if it is found.
   # Check for GNU $ac_path_EGREP
 case `"$ac_path_EGREP" --version 2>&1` in
@@ -4003,7 +4020,7 @@ do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
     for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
     ac_cv_prog_HAVE_OPENSSL="$ac_prog"
     $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
@@ -4178,51 +4195,6 @@ else
 fi
 
 
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
-$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
-if ${ac_cv_lib_pthread_pthread_create+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char pthread_create ();
-int
-main ()
-{
-return pthread_create ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_pthread_pthread_create=yes
-else
-  ac_cv_lib_pthread_pthread_create=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
-$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
-if test "x$ac_cv_lib_pthread_pthread_create" = xyes; then :
-  cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBPTHREAD 1
-_ACEOF
-
-  LIBS="-lpthread $LIBS"
-
-fi
-
 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for socket in -lsocket" >&5
 $as_echo_n "checking for socket in -lsocket... " >&6; }
 if ${ac_cv_lib_socket_socket+:} false; then :
@@ -4515,11 +4487,11 @@ else
 int
 main ()
 {
-/* FIXME: Include the comments suggested by Paul. */
+
 #ifndef __cplusplus
-  /* Ultrix mips cc rejects this.  */
+  /* Ultrix mips cc rejects this sort of thing.  */
   typedef int charset[2];
-  const charset cs;
+  const charset cs = { 0, 0 };
   /* SunOS 4.1.1 cc rejects this.  */
   char const *const *pcpcc;
   char **ppc;
@@ -4536,8 +4508,9 @@ main ()
   ++pcpcc;
   ppc = (char**) pcpcc;
   pcpcc = (char const *const *) ppc;
-  { /* SCO 3.2v4 cc rejects this.  */
-    char *t;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
     char const *s = 0 ? (char *) 0 : (char const *) 0;
 
     *t++ = 0;
@@ -4553,10 +4526,10 @@ main ()
     iptr p = 0;
     ++p;
   }
-  { /* AIX XL C 1.02.0.0 rejects this saying
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
        "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
-    struct s { int j; const int *ap[3]; };
-    struct s *b; b->j = 5;
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
   }
   { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
     const int foo = 10;
@@ -5445,16 +5418,16 @@ if (echo >conf$$.file) 2>/dev/null; then
     # ... but there are two gotchas:
     # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
     # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
+    # In both cases, we have to default to `cp -pR'.
     ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
+      as_ln_s='cp -pR'
   elif ln conf$$.file conf$$ 2>/dev/null; then
     as_ln_s=ln
   else
-    as_ln_s='cp -p'
+    as_ln_s='cp -pR'
   fi
 else
-  as_ln_s='cp -p'
+  as_ln_s='cp -pR'
 fi
 rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
 rmdir conf$$.dir 2>/dev/null
@@ -5514,28 +5487,16 @@ else
   as_mkdir_p=false
 fi
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in #(
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -5557,7 +5518,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 # values after options handling.
 ac_log="
 This file was extended by Active port forwarder $as_me 0.8.4, which was
-generated by GNU Autoconf 2.68.  Invocation command line was
+generated by GNU Autoconf 2.69.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -5623,10 +5584,10 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
 ac_cs_version="\\
 Active port forwarder config.status 0.8.4
-configured by $0, generated by GNU Autoconf 2.68,
+configured by $0, generated by GNU Autoconf 2.69,
   with options \\"\$ac_cs_config\\"
 
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
 
@@ -5717,7 +5678,7 @@ fi
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
   shift
   \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
   CONFIG_SHELL='$SHELL'
diff --git a/modules/Makefile.in b/modules/Makefile.in
index c50c862..813eee9 100644
--- a/modules/Makefile.in
+++ b/modules/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -16,6 +16,23 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -59,6 +76,11 @@ CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = $(exmodule_SOURCES)
 DIST_SOURCES = $(exmodule_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
diff --git a/src/Makefile.in b/src/Makefile.in
index 4855e71..7044786 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.11.3 from Makefile.am.
+# Makefile.in generated by automake 1.11.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -16,6 +16,23 @@
 @SET_MAKE@
 
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -50,13 +67,10 @@ am_afclient_OBJECTS = afclient.$(OBJEXT) network.$(OBJEXT) \
 	buf_list_struct.$(OBJEXT) module_struct.$(OBJEXT) \
 	client_remoteadmin.$(OBJEXT) make_ssl_handshake.$(OBJEXT) \
 	first_run.$(OBJEXT) inet_ntop.$(OBJEXT) \
-	http_proxy_functions.$(OBJEXT) http_proxy_client.$(OBJEXT) \
-	http_proxy_options_struct.$(OBJEXT) \
-	thread_management.$(OBJEXT) client_reverse_udp.$(OBJEXT) \
-	server_check.$(OBJEXT) client_initialization.$(OBJEXT) \
-	client_shutdown.$(OBJEXT) client_signals.$(OBJEXT) \
-	usage.$(OBJEXT) logging.$(OBJEXT) daemon.$(OBJEXT) \
-	base64.$(OBJEXT) ssl_routines.$(OBJEXT) \
+	client_reverse_udp.$(OBJEXT) server_check.$(OBJEXT) \
+	client_initialization.$(OBJEXT) client_shutdown.$(OBJEXT) \
+	client_signals.$(OBJEXT) usage.$(OBJEXT) logging.$(OBJEXT) \
+	daemon.$(OBJEXT) base64.$(OBJEXT) ssl_routines.$(OBJEXT) \
 	connect_user_struct.$(OBJEXT) user_stats_struct.$(OBJEXT) \
 	string_functions.$(OBJEXT) ar_options_struct.$(OBJEXT) \
 	audit_list_node_struct.$(OBJEXT) audit_list_struct.$(OBJEXT) \
@@ -76,9 +90,7 @@ am_afserver_OBJECTS = afserver.$(OBJEXT) network.$(OBJEXT) \
 	server_eval.$(OBJEXT) server_find.$(OBJEXT) \
 	server_remove.$(OBJEXT) make_ssl_handshake.$(OBJEXT) \
 	first_run.$(OBJEXT) inet_ntop.$(OBJEXT) realmnames.$(OBJEXT) \
-	clientnames.$(OBJEXT) usernames.$(OBJEXT) \
-	http_proxy_functions.$(OBJEXT) http_proxy_server.$(OBJEXT) \
-	server_get.$(OBJEXT) thread_management.$(OBJEXT) \
+	clientnames.$(OBJEXT) usernames.$(OBJEXT) server_get.$(OBJEXT) \
 	server_signals.$(OBJEXT) usage.$(OBJEXT) logging.$(OBJEXT) \
 	daemon.$(OBJEXT) ssl_fd_struct.$(OBJEXT) \
 	user_stats_struct.$(OBJEXT) usr_cli_struct.$(OBJEXT) \
@@ -101,6 +113,11 @@ CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = $(afclient_SOURCES) $(afserver_SOURCES)
 DIST_SOURCES = $(afclient_SOURCES) $(afserver_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 ETAGS = etags
 CTAGS = ctags
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -195,8 +212,8 @@ top_srcdir = @top_srcdir@
 afserver_SOURCES = afserver.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \
 									 server_remoteadmin.c server_check.c server_set.c server_eval.c server_find.c \
 									 server_remove.c make_ssl_handshake.c first_run.c inet_ntop.c realmnames.c \
-									 clientnames.c usernames.c http_proxy_functions.c http_proxy_server.c server_get.c \
-									 thread_management.c server_signals.c usage.c logging.c daemon.c ssl_fd_struct.c \
+									 clientnames.c usernames.c server_get.c \
+									 server_signals.c usage.c logging.c daemon.c ssl_fd_struct.c \
 									 user_stats_struct.c usr_cli_struct.c connect_user_struct.c string_functions.c \
 									 audit_list_node_struct.c audit_list_struct.c connect_client_struct.c timeval_functions.c \
 									 header_buffer_struct.c server_realm_struct.c server_configuration_struct.c file_server.c \
@@ -205,8 +222,7 @@ afserver_SOURCES = afserver.c network.c file.c stats.c buf_list_node_struct.c bu
 afclient_LDFLAGS = ${USE_RDYNAMIC}
 afclient_SOURCES = afclient.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \
 									 module_struct.c client_remoteadmin.c make_ssl_handshake.c first_run.c inet_ntop.c \
-									 http_proxy_functions.c http_proxy_client.c http_proxy_options_struct.c \
-									 thread_management.c client_reverse_udp.c server_check.c client_initialization.c \
+									 client_reverse_udp.c server_check.c client_initialization.c \
 									 client_shutdown.c client_signals.c usage.c logging.c daemon.c base64.c ssl_routines.c \
 									 connect_user_struct.c user_stats_struct.c string_functions.c ar_options_struct.c \
 									 audit_list_node_struct.c audit_list_struct.c ssl_fd_struct.c timeval_functions.c \
@@ -249,8 +265,11 @@ $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
 	for p in $$list; do echo "$$p $$p"; done | \
 	sed 's/$(EXEEXT)$$//' | \
 	while read p p1; do if test -f $$p; \
@@ -321,10 +340,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_server.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/first_run.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/header_buffer_struct.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_client.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_functions.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_options_struct.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_server.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inet_ntop.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/make_ssl_handshake.Po@am__quote@
@@ -351,7 +366,6 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_list_node_struct.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_scheduler_struct.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_struct.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread_management.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timeval_functions.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usage.Po@am__quote@
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/user_stats_struct.Po@am__quote@