diff options
152 files changed, 39739 insertions, 0 deletions
@@ -0,0 +1,8 @@ +Author: + o jeremian <jeremian [at] poczta.fm> + +French translation: + o Simon CASTRO <scastro [at] entreelibre.com> + +Russian translation: + o Alex Dyatlov <alex [at] gray-world.net> diff --git a/ChangeLog b/ChangeLog new file mode 100644 index 0000000..2cbe382 --- /dev/null +++ b/ChangeLog @@ -0,0 +1,195 @@ +03.10.2007 (v0.8.4): + - Added (by Joshua Judson Rosen): certificate-based authentication + +21.11.2006 (v0.8.3): + - Fixed: bug in udp_listen function when AF_INET6 is not defined + +13.09.2006 (v0.8.2): + - Fixed: bug in resource deallocation for remote admin clients + +06.04.2006 (v0.8.1): + - Fixed: enableproxy option in server's config file + - Added: clients idle time + - Added: 'maxidle' option + - Modified: task scheduling subsystem has been completely rewritten + - Fixed: segmentation fault in http tunnels after multiple simultaneous POST + connections from the same source + - Fixed: unexpected connection close when http proxy was too slow + - Fixed: SIGSEGV in http proxy mode under cygwin + - Added: enabled the SO_KEEPALIVE option for all the sockets used by the apf + - Added: 60 seconds timeout for SSL_connect + +04.02.2006 (v0.8): + - Fixed: infinite loop after buffering message + - Fixed: corrupt packets after closing connections in the stopped state + - Fixed: bug in mapping user numbers between afclient and afserver + - Fixed: premature close of the service connection + - Fixed: invalid buffering when the connection is closing + - Added: Multiple tunnels in one afclient<->afserver connection + +16.11.2005 (v0.7.5): + - Fixed: manageport option in the afclient config file + - Fixed: severe bug in string_cp + - Fixed: wrong connection type used by afclient when afserver used --nossl + or --nozlib option + - Fixed: broken keep-alive option + +03.11.2005 (v0.7.4): + - Fixed: sockets in CLOSE_WAIT state left by afclient + - Added: --localname and --localport options + - Added: --localdesname option + - Added: kicking user in 'opening' state + - Fixed: info about kicked user + - Fixed: TERM signal handling + - Fixed: id lost after reconnection + - Fixed: printing wrong client name in 'SSL_accept failed (timeout)' message + - Fixed: ignored 'certificate' and 'key' options from config file + - Added: config files for afclient + - Modified: some options in afserver config file + +05.08.2005 (v0.7.2): + - Added: http proxy basic authorization + - Fixed: logging initialization after some value checking + - Fixed: auto-reconnect failure when --nossl option is set + - Added: auto-reconnect when afserver is not reachable on start + - Added: auto-reconnect after normal afserver quit + - Added: per user statistics: idle time, amount of downloaded/uploaded bytes + and current download/upload rate + - Added: support for https proxies + - Added: possibility to bind sockets on different interfaces + - Fixed: receiving incomplete headers from afclient + - Fixed: close user connections by afclient + +03.07.2005 (v0.7.1): + - Added: afserver certificate storing and checking + - Modified: generating keys and certificate + - Fixed: creating apf directory + - Fixed: some bugs in proxy tunnel initialization + +07.06.2005 (v0.7): + - Added: http proxy tunnels between afserver and afclient + - Fixed: sigint interception with threads enabled (in http proxy mode) + - Fixed: FATAL ERROR in afclient in some situations after close of afserver + when http proxy mode is enabled + - Added: afclients can connect directly to afserver with enabled proxy mode + - Fixed: timeout routine in http proxy tunnels + - Added: 'rshow' command in ra mode displays 'tunneltype' + - Fixed: printing IP of clients when http proxy mode is enabled + - Added: 'tunneltype' per client in ra mode after 'cshow' command + - Fixed: closing connection when http proxy mode is enabled + - Fixed: threads initialization + - Fixed: afserver closing after sigint + - Fixed: afclient threads initialization + - Added: 'version' option to display program version number + - Modified: establishing afclient<->afserver connection + - Added: 'keep-alive' option + - Fixed: using 'proxyport' without 'proxyname' + - Added: auto-reconnect feature to afclient + - Added: 'ar-tries' and 'ar-delay' options + - Modified: http proxy logging + - Fixed: closing connection with afclient after receiving id + - Fixed: thread closing due to wrong initialization sequence + - Fixed: small bug in initialization process + - Heavily Modified: logging routines + - Added: audit option + - Modified: default dateformat is now ISO 8601 + - Modified: printing usage + - Fixed: bug in threads' initialization in afclient + - Added: 'timeout' and 'dateformat' options in ra mode + - Modified: empty dateformat disables printing '[] ' + - Added: 'audit' and 'dnslookups' options in ra mode + - Fixed: afserver freeze bug + - Added: 'kuser' and 'kclient' options in ra mode + - Fixed: bug in starting afclient in ra mode + - Added: audit log printed also after kicking the client + +11.03.2005 (v0.6): + - Fixed: default password incompatibilities from config file + - Added: "client's id" option + - Lightly Modified: verbose mode + - Added: temporary listen ports + - Fixed: bug in printing "client's id" + - Added: 'dateformat' option to set format of the date in the logs + - Modified: command line option and config file behaviour + - Added: logging to a socket + - Fixed: parsing config file + - Fixed: major bug in packet buffering + - Added: several clients-users in one realm + - Modified: default hostname used by afserver + - Modified: server listening behaviour (for clients) + - Fixed: bug in checking options values + - Modified: verbose mode + - Modified: client initial connection to server + - Added: connection time / uptime statistics + - Added: first version of remote administration (statistics only) + - Fixed: major bug in remove_client routine + - Added: 'raclients' option + - Added: use of automake/autoconf + - Added: creating ~/.apf directory + - Modified: the way of creating/managing keys/certificates + - Added: 'dnslookups' option + - Modified: usage functions + - Fixed: no handling of missing 'listen' option after 'newrealm' in config file + - Added: 'quit' command in remote administration mode + - Modified: logging error messages during initialization + - Modified: 'newrealm' changed to 'realm' in config file + - Added: realm names + - Modified: connection time / uptime + - Added: client names / unique numbers + - Added: user unique numbers + - Fixed: segmentation fault after 'quit' command + +19.11.2004 (udp_patch): + - Lightly Modified: verbose in client's udp reverse mode + - Fixed: major bug in udp protocol forwarding + +11.10.2004 (v0.5.5): + - Added: rsa key generation by afclient + - Modified: afclient is now generating keys by default + - Fixed: major bug in packet buffering + - Added: 'timeout', 'clients' and 'usrpcli' options + - Fixed: parsing 'users' option + - Modified: module management routines + - Added: module support for service's packet filtering + - Fixed: few minor bugs in closing connection routines + - Added: possibility to use several clients per realm + - Modified: there is no need for 'users', 'timeout', 'clients', + 'proto', 'usrpcli' and 'climode' options in config + file when default values are acceptable + +26.05.2004 (v0.5.4): + - Fixed: default password incompatibilities + - Modified: server listening behaviour + - Added: module support for client's packet filtering + - Modified: client behaviour after unsuccessful connection + - Fixed: printing ipv6 addresses + - Added: IP protocol family strict choice: 'ipv4' and 'ipv6' + - Added: flow control / packet buffering + - Fixed: signal handling + - Fixed: client freeze in udp reverse mode with zlib enabled + +09.01.2004 (v0.5.3): + - Added: client password identification (weak) + - Added: sigint interception and server closing + - Modified: communication between server and client + - Added: 'nossl' and 'nozlib' modes + - Added: zlib support + - Lightly Modified: verbose mode + - Modified/Added: help screen and long options support + +06.12.2003 (v0.5.2): + - Added: types of realm + - Added: logging to a file + - Fixed: major bug in communication between server and client + - Fixed: deformed packets in udp protocol forwarding + +04.12.2003 (v0.5.1): + - Fixed: some data transfer problems + - Added: udp protocol tunneling/forwarding + - Fixed: bug in parsing the config file + - Improved: making connection between server and client + - Lightly modified: verbose mode (added double v mode) + +23.11.2003 (v0.5): + - This is the first release + - There are no known major bugs @@ -0,0 +1,182 @@ +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, a file +`config.cache' that saves the results of its tests to speed up +reconfiguring, and a file `config.log' containing compiler output +(useful mainly for debugging `configure'). + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If at some point `config.cache' +contains results you don't want to keep, you may remove or edit it. + + The file `configure.in' is used to create `configure' by a program +called `autoconf'. You only need `configure.in' if you want to change +it or regenerate `configure' using a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile the package for one architecture at a time +in the source code directory. After you have installed the package for +one architecture, use `make distclean' before reconfiguring for another +architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' can not figure out +automatically, but needs to determine by the type of host the package +will run on. Usually `configure' can figure that out, but if it prints +a message saying it can not guess the host type, give it the +`--host=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name with three fields: + CPU-COMPANY-SYSTEM + +See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the host type. + + If you are building compiler tools for cross-compiling, you can also +use the `--target=TYPE' option to select the type of system they will +produce code for and the `--build=TYPE' option to select the type of +system on which you are compiling the package. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Operation Controls +================== + + `configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. diff --git a/Makefile.am b/Makefile.am new file mode 100644 index 0000000..6df8bb4 --- /dev/null +++ b/Makefile.am @@ -0,0 +1,4 @@ +SUBDIRS = src +DIST_SUBDIRS = src +man_MANS = doc/afclient.1 doc/afclient.conf.5 doc/afserver.1 doc/afserver.conf.5 +EXTRA_DIST = doc modules config diff --git a/Makefile.in b/Makefile.in new file mode 100644 index 0000000..7de0b0f --- /dev/null +++ b/Makefile.in @@ -0,0 +1,683 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = . +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + depcomp install-sh missing mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno configure.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +man1dir = $(mandir)/man1 +am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" +man5dir = $(mandir)/man5 +NROFF = nroff +MANS = $(man_MANS) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +HAVE_OPENSSL = @HAVE_OPENSSL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LINKED_LDLIB = @LINKED_LDLIB@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_RDYNAMIC = @USE_RDYNAMIC@ +VERSION = @VERSION@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +SUBDIRS = src +DIST_SUBDIRS = src +man_MANS = doc/afclient.1 doc/afclient.conf.5 doc/afserver.1 doc/afserver.conf.5 +EXTRA_DIST = doc modules config +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +uninstall-info-am: +install-man1: $(man1_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)" + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \ + done +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.1*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man1dir)/$$inst"; \ + done +install-man5: $(man5_MANS) $(man_MANS) + @$(NORMAL_INSTALL) + test -z "$(man5dir)" || $(mkdir_p) "$(DESTDIR)$(man5dir)" + @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.5*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 5*) ;; \ + *) ext='5' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst"; \ + done +uninstall-man5: + @$(NORMAL_UNINSTALL) + @list='$(man5_MANS) $(dist_man5_MANS) $(nodist_man5_MANS)'; \ + l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ + for i in $$l2; do \ + case "$$i" in \ + *.5*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 5*) ;; \ + *) ext='5' ;; \ + esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ + inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ + echo " rm -f '$(DESTDIR)$(man5dir)/$$inst'"; \ + rm -f "$(DESTDIR)$(man5dir)/$$inst"; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(MANS) config.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: install-man + +install-exec-am: + +install-info: install-info-recursive + +install-man: install-man1 install-man5 + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-info-am uninstall-man + +uninstall-info: uninstall-info-recursive + +uninstall-man: uninstall-man1 uninstall-man5 + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ + check-am clean clean-generic clean-recursive ctags \ + ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ + dist-tarZ dist-zip distcheck distclean distclean-generic \ + distclean-hdr distclean-recursive distclean-tags \ + distcleancheck distdir distuninstallcheck dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-man1 install-man5 \ + install-strip installcheck installcheck-am installdirs \ + installdirs-am maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-info-am uninstall-man \ + uninstall-man1 uninstall-man5 + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: @@ -0,0 +1,43 @@ +03.10.2007: + * Joshua Judson Rosen has added certificate-based authentication + to APF + +16.03.2006: + * configure and other scripts have been updated + +05.02.2006: + * debug feature (default is NO) has been added to the configure + script + +31.01.2006: + * a lot of bugs have been found and fixed due to automatic tests + +18.12.2005: + * the exemption to the license has been added in order to allow + linking with OpenSSL library + +16.11.2005: + * it's time for new release containing several bugfixes + +14.11.2005: + * small bugs has appeared due to severe code rewrites. They are + fixed as they come. + +07.11.2005: + * apf 0.7.4 is available on the gray-world.net + +03.07.2005: + * a lot of code cleanups and modifications have been made in order + to make sources more portable. APF compile under Solaris 10. + +06.06.2005: + * apf 0.7 is ready for public release + +27.05.2005: + * check for pthread library has been included in configure script + +09.05.2005: + * source tree has been put into subversion + +18.02.2005: + * source tree has been reorganized for automake/autoconf @@ -0,0 +1,685 @@ +AF - Active Port Forwarder 0.8.4 - README +Copyright (C) 2003-2007 jeremian - <jeremian [at] poczta.fm> +================================================================= + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +====================================== + + The Active Port Forwarder program is part of the Gray-World.net projects. + + Our Gray-World Team presents on the http://gray-world.net website the projects + and publications we are working on which are related to the NACS (Network + Access Control System) bypassing research field and to the computer and + network security topics. + +================================================================================ + +======= +SUMMARY +======= + +INTRO + +1. INSTALLATION + 1.1 Instructions + 1.2 Required libs + 1.3 Tested platforms +2. USAGE + 2.1 afserver + 2.2 afclient +3. REMOTE ADMINISTRATION + 3.1 Usage + 3.2 Commands + 3.3 States + 3.3.1 Users + 3.3.2 Clients + 3.4 Relay mode +4. HTTP PROXY TUNNELS +5. LOGGING +6. MODULES +7. MULTI TUNNELS +8. EXAMPLES + 8.1 tcp mode + 8.2 reverse udp mode +9. BUGS/PROBLEMS + +NOTES + +THANKS + +================================================================================ + +===== +INTRO +===== + +Active port forwarder is a software tool for secure port forwarding. +It uses ssl to increase security of communication between a server and a client. +Originally, it was developed to forward data point to point. However, the need +for bypassing firewalls in order to connect to internally located computers +influenced the further development of the project. + +AF is dedicated for people, who don't have an external ip number and want to +make some services available across the net. + +Moreover, zlib is used to compress the transferred data. + +Using one, permanent data/control channel with flow control / packet buffering +provides good performance and reasonably small latency. + +Multiple clients allow to create more sophisticated tunneling scheme. + +================================================================================ + +=============== +1. INSTALLATION +=============== + + 1.1 Instructions + ---------------- + +1. Download the compressed sources from http://www.gray-world.net/pr_af.shtml +2. Unpack them with tar zxvf +3. Type "./configure" +4. Type "make" +5. Type "make install" while logged as root +6. If something goes wrong - mail the author or post a message on + http://gray-world.net/board/ + + 1.2 Required libs + ----------------- + +1. openssl - http://www.openssl.org/ +2. zlib - http://www.gzip.org/zlib/ + + 1.3 Tested platforms + -------------------- + +1. Linux: + Gentoo, Slackware, Mandrake - built without any problems +2. Windows: + win32 - cygwin version is available on the project homepage + +================================================================================ + +======== +2. USAGE +======== + + 2.1 afserver + ------------ + + Basic options: + + -n, --hostname - it's used when creating listening sockets + (default: '') + -l, --listenport - listening [host:]port - users connect to it + (default: 50127) + -m, --manageport - manage [host:]port - afclient connects to it + (default: 50126) + -V, --version - display version number + -h, --help - prints this help + + Authorization: + + --pass - set the password used for client identification + (default: no password) + + Configuration: + + -c, --cerfile - the name of the file with certificate + (default: server-cert.pem) + -A, --cacerfile - the name of the file with CA certificates + (if used, require clients to have valid certificates) + -d, --cerdepth - the maximum depth of valid certificate-chains + -k, --keyfile - the name of the file with RSA key (default: server.rsa) + -f, --cfgfile - the name of the file with the configuration for the + active forwarder (server) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + -t, --timeout - the timeout value for the client's connection + (default: 5) + --maxidle - the maximum idle time for the client's connection + (default: disabled) + -u, --users - the amount of users allowed to use this server + (default: 5) + -C, --clients - the number of allowed clients to use this server + (default: 1) + -r, --realm - set the realm name (default: none) + -R, --raclients - the number of allowed clients in remote administration + mode to use this server (default: 1) + -U, --usrpcli - the number of allowed users per client (default: $users) + -M, --climode - strategy used to connect users with clients (default: 1) + Available strategies: + 1. fill first client before go to next + + -p, --proto - type of server (tcp|udp) - what protocol it will be + operating for (default: tcp) + -b, --baseport - listenports are temporary and differ for each client + -a, --audit - additional information about connections are logged + --nossl - ssl is not used to transfer data (but it's still used + to establish a connection) (default: ssl is used) + --nozlib - zlib is not used to compress data (default: zlib is + used) + --dnslookups - try to obtain dns names of the computers rather than + their numeric IP + + Logging: + + -o, --log - log choosen information to file/socket + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + HTTP PROXY: + + -P, --enableproxy - enable http proxy mode + + + 2.2 afclient + ------------ + + Basic options: + + -n, --servername - where the second part of the active + port forwarder is running (required) + -m, --manageport - manage port number - server must be + listening on it (default: 50126) + -d, --hostname - the name of this host/remote host - the final + destination of the packets (default: the name + returned by hostname function) + -p, --portnum - the port we are forwarding connection to (required) + --localname - local machine name for connection with afserver + (used to bind socket to different interfaces) + --localport - local port name for connection with afserver + (used to bind socket to different addressees) + --localdesname - local machine name for connections with destination + application (used to bind socket to different interfaces) + -V, --version - display version number + -h, --help - prints this help + + Authorization: + + -i, --id - sends the id string to afserver + --pass - set the password used for client identification + (default: no password) + --ignorepkeys - ignore invalid server's public keys + + Configuration: + + -k, --keyfile - the name of the file with RSA key (default: client.rsa) + -c, --cerfile - the name of the file with certificate + (default: no certificate used) + -f, --cfgfile - the name of the file with the configuration for the + active forwarder (client) + -s, --storefile - the name of the file with stored public keys + (default: known_hosts) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + -K, --keep-alive N - send keepalive packets every N seconds + (default: not send keepalive packets) + + Auto-reconnection: + + --ar-start - enable auto-reconnection when afserver is not + reachable on start (default: disabled) + --ar-quit - enable auto-reconnection after normal afserver quit + (default: disabled) + --noar - disable auto-reconnection after premature afserver + quit (default: enabled) + -A, --ar-tries N - try N times to reconnect (default: unlimited) + -T, --ar-delay N - wait N seconds between reconnect tries (default: 5) + + Modes: + + -u, --udpmode - udp mode - client will use udp protocol to + communicate with the hostname:portnum + -U, --reverseudp - reverse udp forwarding. Udp packets will be forwarded + from hostname:portnum to the server name:manageport + -r, --remoteadmin - remote administration mode. (using '-p #port' will + force afclient to use port rather than stdin-stdout) + + Logging: + + -o, --log - log choosen information to file/socket + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + Modules: + + -l, --load - load a module for user's packets filtering + -L, --Load - load a module for service's packets filtering + + HTTP/HTTPS PROXY: + + -S, --use-https - use https proxy instead of http proxy + -P, --proxyname - the name of the machine with proxy server + -X, --proxyport - the port used by proxy server (default: 8080) + -C, --pa-cred U:P - the user (U) and password (P) used in proxy + authorization + -B, --pa-t-basic - the Basic type of proxy authorization (default) + + +================================================================================ + +======================== +3. REMOTE ADMINISTRATION +======================== + + 3.1 Usage + --------- + +Afclient can be started in remote administration mode by '-r, --remoteadmin' +option. Required option: '-n, --servername NAME'. + +After successful authorization stdin/stdout is used to communicate with user. +All the commands parsing is done by afserver. + + 3.2 Commands + ------------ + +Currently available commands are: + + help + display help + + lcmd + lists available commands + + info + prints info about server + + rshow + display realms + + cshow X + display clients in X realm + + ushow X + display users in X realm + + quit + quit connection + + timeout N X + set timeout value in X realm + + audit {0|1} X + set audit mode in X realm + + dnslookups {0|1} X + set dnslookups mode in X realm + + dateformat S + set dateformat + + kuser S + kick user named S + + kclient N + kick client with number N + + + 3.3 States + ---------- + + 3.3.1 Users + ----------- + + Connected users can be in several states: + + running + user is properly connected and can send/receive data + + opening + user is connected to afserver, but afclient hasn't confirmed connection + with the destination. There is no traffic allowed in this situation. + + opening (closed) + user was in 'opening' state, but 'kuser' command has been used and it's + now queued for closing as soon as afclient will be ready to confirm + this + + stopped + user wasn't responsible, so all the packets addressed to it are queued. + Afclient is informed to not receive any packets for this user. + + closing + connection with user has been lost. Afclient has to confirm user + deletion + + unknown + probably afserver internal state has been corrupted. + + + 3.3.2 Clients + ------------- + + Connected clients can be in several states: + + running + client is properly connected and can serve user's requests + + ssl handshake + connection with client has been initialized and now ssl routines are + negotiating all the details needed to establish secure tunnel. This + stage with 'authorization' must not exceed the time set by 'timeout' + option. + + authorization + ssl tunnel is ready and afclient has to authorize itself to the + afserver. This stage with 'ssl handshake' must not exceed the time set + by 'timeout' option. + + unknown + probably afserver internal state has been corrupted. + + + 3.4 Relay mode + -------------- + +Afclient with '-p, --portnum PORT' option listens for connection from user at +NAME:PORT. NAME is set by '-d, --hostname' option or hostname() function, when +the option is missing. + +When user quits (close the connection or send 'quit' command), afclient exits. + +================================================================================ + +===================== +4. HTTP PROXY TUNNELS +===================== + +Afclient can communicate with afserver via HTTP proxy. In order to use this +feature, afserver must be started with '-P, --enableproxy' option. Afclient must +specify the proxy host ('-P, --proxyname' option) and port ('-X, --proxyport' +option). + +Afclient with HTTP proxy mode enabled can still accept connections from +afclients, which don't use HTTP proxy mode. + +================================================================================ + +========== +5. LOGGING +========== + +Logging can be enabled by '-o, --log' option. The argument to this option must +be in the form: + target,description,msgdesc + +Where + target is file or sock + description is filename or host,port + msgdesc is the subset of: + LOG_T_ALL, + LOG_T_USER, + LOG_T_CLIENT, + LOG_T_INIT, + LOG_T_MANAGE, + LOG_T_MAIN, + LOG_I_ALL, + LOG_I_CRIT, + LOG_I_DEBUG, + LOG_I_DDEBUG, + LOG_I_INFO, + LOG_I_NOTICE, + LOG_I_WARNING, + LOG_I_ERR + + written without spaces. + + + Example: + + file,filename,LOG_T_MANAGE,LOG_I_ALL + +================================================================================ + +========== +6. MODULES +========== + +Afclient can use external modules for user's packets filtering ('-l, --load') +and service's packets filtering ('-L, --Load'). Module file has to declare three +functions: + +char* info(void); + + info() return values: + - info about module + + Example: + + char* + info(void) + { + return "Module tester v0.1"; + } + +int allow(char* host, char* port); + + allow() return values: + 0 - allow to connect + !0 - drop the connection + + Example: + + int + allow(char* host, char* port) + { + return 0; /* allow to connect */ + } + +int filter(char* host, unsigned char* message, int* length); + + filter() return values: + 0 - allow to transfer + 1 - drop the packet + 2 - drop the connection + 3 - release the module + 4 - drop the packet and release the module + 5 - drop the connection and release the module + + Example: + + int + filter(char* host, unsigned char* message, int* length) + { + int i; + for (i = 1; i < *length; ++i) { + if (message[i-1] == 'M') { + if (message[i] == '1') { + return 1; /* ignored */ + } + if (message[i] == '2') { + return 2; /* dropped */ + } + if (message[i] == '3') { + return 3; /* release */ + } + if (message[i] == '4') { + return 4; /* ignored + release */ + } + if (message[i] == '5') { + return 5; /* dropped + release */ + } + } + } + return 0; /* allow to transfer */ + } + +Modules have to be compiled with '-fPIC -shared' options. + +================================================================================ + +================ +7. MULTI TUNNELS +================ + +Since version 0.8 it's possible to transfer multiple tunnels in the one +afclient <-> afserver connection. + +On the afserver we have to specify multiple listen ports with the same manage +port. + +When we set several '-p' options on the afclient, the new user connections will +be distributed according to the sequence of the options, i.e. new user +connecting to the second UsrCli pair (with the same manage ports) will be +transferred to the destination pointed by the second '-p' option. + +================================================================================ + +=========== +8. EXAMPLES +=========== + + 8.1 tcp mode + ------------ + + local network |FireWall| Internet + || + || User 1 + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | \(tcp) + /(tcp) || (tcp)| User 2 + / || \ + Http server || User 3 + || + + +The use of it is extremely simple. Let's suppose we want to create a http server +on our computer and we are behind a masquerade or a firewall: + +1) We have to find some machine on the net with an external ip and a shell + account. + +2) Use "make" to compile everything on that machine. (you can freely remove the + afclient and client.rsa files) + +3) You can edit the config file or just type from the console (to use the config + type -f <cfgfile>) : + $ ./afserver + This will work, if you want to use default values: + - hostname will be taken from hostname function (it would be ideally, if + there is appropriate registration in /etc/hosts) + - server will be listening for users on port 50127 + - server will be listening for client on port 50126 + - server will be for maximum 5 users + - server will forward tcp packets + - there will be no logging and no verbose messages + - there will be no password identification + - ip protocol family will be unspecified + +4) We use "make" on our machine (we can delete everything apart from afclient + and client.rsa) + +5) We are typing from the console: + $ ./afclient -n <name of the server> -p 80 + Where <name of the server> is a string like : 'bastion.univ.gda.pl' or + '153.19.7.200' + +6) We can now enter with a web-browser to: <name of the server>:50127 and we + will enter to our computer in the fact. + + 8.2 reverse udp mode + -------------------- + + local network |FireWall| Internet + || (udp) + || User 1-------AF Client + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | + /(udp) || (tcp)| + / || / + Game server || AF Client-------User 2 + || (udp) + + +Let's see how to use af to forward udp packets. Suppose we want to create a game +server on our computer (udp port 27960 on our machine): + +1) - 4) is the same like in example 1. (but we add option: -p udp) + +5) We are typing from the console: + $ ./afclient -u -n <name of the server> -p 27960 + Where <name of the server> is a name (or ip) of a host where our server is + running. + +6) Connecting to our game is more complicated. The user must use afclient to do + this. He has to specify the server he is connecting to and the port, which + his program will be listening on: + $ ./afclient -U -d <hostname> -p <portnum> -n <name of the server> \ + -m <server port> + Where <hostname> is the name of the user machine (who wants to connect to our + game). <portnum> is the port he will be connecting to. <name of the server> + is the name of the host where our server is running. <server port> is the + port on which the server is listening for users. In order to connect to our + game, the user has to connect to <hostname>:<portnum>. + +================================================================================ + +================ +9. BUGS/PROBLEMS +================ + +There are no known/open bugs at the moment. + +================================================================================ + +===== +NOTES +===== + +Active port forwarder is still under development, so please sent any comments, +bugs notices and suggestions about it to <jeremian [at] poczta.fm> + +If you have some problems or want to share your opinions with others, feel free +to post a message at http://gray-world.net/board/ + +================================================================================ + +====== +THANKS +====== + + Big thanks to the GW Team: + + to Alex <alex [at] gray-world.net> + and Simon <scastro [at] entreelibre.com> for testing AF and a lot of advices. + + Thanks to Ilia Perevezentsev <iliaper [at] mail.ru> who read and corrected the +README file. + + Thanks to Marco Solari <marco.solari [at] koinesistemi.it> for a lot of +requests, suggestions and ideas. + + Thanks to Joshua Judson Rosen <rozzin [at] geekspace.com> for the patch adding +certificate-based authentication to the APF. + + And thanks for using this software! + +LICENSE +------- + + Active Port Forwarder is distributed under the terms of the GNU General + Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian + [at] poczta.fm>. See the file COPYING for details. + + In addition, as a special exception, the copyright holders give permission to + link the code of portions of this program with the OpenSSL library under + certain conditions as described in each individual source file, and distribute + linked combinations including the two. diff --git a/aclocal.m4 b/aclocal.m4 new file mode 100644 index 0000000..7d473d5 --- /dev/null +++ b/aclocal.m4 @@ -0,0 +1,862 @@ +# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION so it can be traced. +# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], + [AM_AUTOMAKE_VERSION([1.9.6])]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH]) +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 3 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 12 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.58])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"$am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. +# +# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories +# created by `make install' are always world readable, even if the +# installer happens to have an overly restrictive umask (e.g. 077). +# This was a mistake. There are at least two reasons why we must not +# use `-m 0755': +# - it causes special bits like SGID to be ignored, +# - it may be too restrictive (some setups expect 775 directories). +# +# Do not use -m 0755 and let people choose whatever they expect by +# setting umask. +# +# We cannot accept any implementation of `mkdir' that recognizes `-p'. +# Some implementations (such as Solaris 8's) are not thread-safe: if a +# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' +# concurrently, both version can detect that a/ is missing, but only +# one can create it and the other will error out. Consequently we +# restrict ourselves to GNU make (using the --version option ensures +# this.) +AC_DEFUN([AM_PROG_MKDIR_P], +[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi +AC_SUBST([mkdir_p])]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/config.h.in b/config.h.in new file mode 100644 index 0000000..83bfcec --- /dev/null +++ b/config.h.in @@ -0,0 +1,252 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the <arpa/inet.h> header file. */ +#undef HAVE_ARPA_INET_H + +/* Define to 1 if you have the `bzero' function. */ +#undef HAVE_BZERO + +/* Define to 1 if you have the `compress' function. */ +#undef HAVE_COMPRESS + +/* Define to 1 if you have the `daemon' function. */ +#undef HAVE_DAEMON + +/* Define to 1 if you have the `dlclose' function. */ +#undef HAVE_DLCLOSE + +/* Define to 1 if you have the `dlopen' function. */ +#undef HAVE_DLOPEN + +/* Define to 1 if you have the `dlsym' function. */ +#undef HAVE_DLSYM + +/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */ +#undef HAVE_DOPRNT + +/* Define to 1 if you have the `ERR_error_string' function. */ +#undef HAVE_ERR_ERROR_STRING + +/* Define to 1 if you have the `ERR_get_error' function. */ +#undef HAVE_ERR_GET_ERROR + +/* Define to 1 if you have the <fcntl.h> header file. */ +#undef HAVE_FCNTL_H + +/* Define to 1 if you have the `getaddrinfo' function. */ +#undef HAVE_GETADDRINFO + +/* Define to 1 if you have the `gethostname' function. */ +#undef HAVE_GETHOSTNAME + +/* Define to 1 if you have the `getnameinfo' function. */ +#undef HAVE_GETNAMEINFO + +/* Define to 1 if you have the `getpwnam' function. */ +#undef HAVE_GETPWNAM + +/* Define to 1 if you have the `gettimeofday' function. */ +#undef HAVE_GETTIMEOFDAY + +/* Define to 1 if you have the `inet_ntop' function. */ +#undef HAVE_INET_NTOP + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the `crypto' library (-lcrypto). */ +#undef HAVE_LIBCRYPTO + +/* Define to 1 if you have the `dl' library (-ldl). */ +#undef HAVE_LIBDL + +/* Define to 1 if you have the `nsl' library (-lnsl). */ +#undef HAVE_LIBNSL + +/* Define to 1 if you have the `pthread' library (-lpthread). */ +#undef HAVE_LIBPTHREAD + +/* Define to 1 if you have the `socket' library (-lsocket). */ +#undef HAVE_LIBSOCKET + +/* Define to 1 if you have the `ssl' library (-lssl). */ +#undef HAVE_LIBSSL + +/* Define to 1 if you have the `z' library (-lz). */ +#undef HAVE_LIBZ + +/* Define to 1 if you have the <limits.h> header file. */ +#undef HAVE_LIMITS_H + +/* Define to 1 if you have the <linux/sockios.h> header file. */ +#undef HAVE_LINUX_SOCKIOS_H + +/* Define to 1 if your system has a GNU libc compatible `malloc' function, and + to 0 otherwise. */ +#undef HAVE_MALLOC + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `memset' function. */ +#undef HAVE_MEMSET + +/* Define to 1 if you have the <netdb.h> header file. */ +#undef HAVE_NETDB_H + +/* Define to 1 if you have the <netinet/in.h> header file. */ +#undef HAVE_NETINET_IN_H + +/* Define to 1 if you have the <pwd.h> header file. */ +#undef HAVE_PWD_H + +/* Define to 1 if your system has a GNU libc compatible `realloc' function, + and to 0 otherwise. */ +#undef HAVE_REALLOC + +/* Define to 1 if you have the `select' function. */ +#undef HAVE_SELECT + +/* Define to 1 if you have the `socket' function. */ +#undef HAVE_SOCKET + +/* Define to 1 if you have the `SSL_accept' function. */ +#undef HAVE_SSL_ACCEPT + +/* Define to 1 if you have the `SSL_clear' function. */ +#undef HAVE_SSL_CLEAR + +/* Define to 1 if you have the `SSL_connect' function. */ +#undef HAVE_SSL_CONNECT + +/* Define to 1 if you have the `SSL_CTX_new' function. */ +#undef HAVE_SSL_CTX_NEW + +/* Define to 1 if you have the `SSL_CTX_set_cipher_list' function. */ +#undef HAVE_SSL_CTX_SET_CIPHER_LIST + +/* Define to 1 if you have the `SSL_CTX_use_certificate_file' function. */ +#undef HAVE_SSL_CTX_USE_CERTIFICATE_FILE + +/* Define to 1 if you have the `SSL_CTX_use_RSAPrivateKey_file' function. */ +#undef HAVE_SSL_CTX_USE_RSAPRIVATEKEY_FILE + +/* Define to 1 if you have the `SSL_get_cipher_name' function. */ +#undef HAVE_SSL_GET_CIPHER_NAME + +/* Define to 1 if you have the `SSL_get_cipher_version' function. */ +#undef HAVE_SSL_GET_CIPHER_VERSION + +/* Define to 1 if you have the `SSL_get_error' function. */ +#undef HAVE_SSL_GET_ERROR + +/* Define to 1 if you have the `SSL_library_init' function. */ +#undef HAVE_SSL_LIBRARY_INIT + +/* Define to 1 if you have the `SSL_load_error_strings' function. */ +#undef HAVE_SSL_LOAD_ERROR_STRINGS + +/* Define to 1 if you have the `SSL_new' function. */ +#undef HAVE_SSL_NEW + +/* Define to 1 if you have the `SSL_read' function. */ +#undef HAVE_SSL_READ + +/* Define to 1 if you have the `SSL_set_fd' function. */ +#undef HAVE_SSL_SET_FD + +/* Define to 1 if you have the `SSL_write' function. */ +#undef HAVE_SSL_WRITE + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strftime' function. */ +#undef HAVE_STRFTIME + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strtol' function. */ +#undef HAVE_STRTOL + +/* Define to 1 if you have the <sys/ioctl.h> header file. */ +#undef HAVE_SYS_IOCTL_H + +/* Define to 1 if you have the <sys/select.h> header file. */ +#undef HAVE_SYS_SELECT_H + +/* Define to 1 if you have the <sys/socket.h> header file. */ +#undef HAVE_SYS_SOCKET_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/time.h> header file. */ +#undef HAVE_SYS_TIME_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the `uncompress' function. */ +#undef HAVE_UNCOMPRESS + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if you have the `vprintf' function. */ +#undef HAVE_VPRINTF + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define to the type of arg 1 for `select'. */ +#undef SELECT_TYPE_ARG1 + +/* Define to the type of args 2, 3 and 4 for `select'. */ +#undef SELECT_TYPE_ARG234 + +/* Define to the type of arg 5 for `select'. */ +#undef SELECT_TYPE_ARG5 + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */ +#undef TIME_WITH_SYS_TIME + +/* Define to 1 if your <sys/time.h> declares `struct tm'. */ +#undef TM_IN_SYS_TIME + +/* Version number of package */ +#undef VERSION + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to rpl_malloc if the replacement function should be used. */ +#undef malloc + +/* Define to rpl_realloc if the replacement function should be used. */ +#undef realloc diff --git a/configure b/configure new file mode 100755 index 0000000..086c32a --- /dev/null +++ b/configure @@ -0,0 +1,8054 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.61 for Active port forwarder 0.8.4. +# +# Report bugs to <jeremian@poczta.fm>. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +# +# +# Copyright (C) 2003-2007 jeremian - <jeremian [at] poczta.fm> +# =================== +# +# ================================================================================ +# +# GRAY-WORLD.NET / Active Port Forwarder +# ========================== +# +# The Active Port Forwarder program is part of the Gray-World.net projects. +# +# Our Gray-World Team presents on the http://gray-world.net website the projects +# and publications we are working on which are related to the NACS (Network +# Access Control System) bypassing research field and to the computer and +# network security topics. +# +# ================================================================================ +# +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell autoconf@gnu.org about your system, + echo including any error possibly output before this + echo message +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +exec 7<&0 </dev/null 6>&1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='Active port forwarder' +PACKAGE_TARNAME='apf' +PACKAGE_VERSION='0.8.4' +PACKAGE_STRING='Active port forwarder 0.8.4' +PACKAGE_BUGREPORT='jeremian@poczta.fm' + +ac_unique_file="src/afserver.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#ifdef HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#ifdef HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#ifdef STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# ifdef HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#ifdef HAVE_STRINGS_H +# include <strings.h> +#endif +#ifdef HAVE_INTTYPES_H +# include <inttypes.h> +#endif +#ifdef HAVE_STDINT_H +# include <stdint.h> +#endif +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='SHELL +PATH_SEPARATOR +PACKAGE_NAME +PACKAGE_TARNAME +PACKAGE_VERSION +PACKAGE_STRING +PACKAGE_BUGREPORT +exec_prefix +prefix +program_transform_name +bindir +sbindir +libexecdir +datarootdir +datadir +sysconfdir +sharedstatedir +localstatedir +includedir +oldincludedir +docdir +infodir +htmldir +dvidir +pdfdir +psdir +libdir +localedir +mandir +DEFS +ECHO_C +ECHO_N +ECHO_T +LIBS +build_alias +host_alias +target_alias +INSTALL_PROGRAM +INSTALL_SCRIPT +INSTALL_DATA +CYGPATH_W +PACKAGE +VERSION +ACLOCAL +AUTOCONF +AUTOMAKE +AUTOHEADER +MAKEINFO +install_sh +STRIP +INSTALL_STRIP_PROGRAM +mkdir_p +AWK +SET_MAKE +am__leading_dot +AMTAR +am__tar +am__untar +CC +CFLAGS +LDFLAGS +CPPFLAGS +ac_ct_CC +EXEEXT +OBJEXT +DEPDIR +am__include +am__quote +AMDEP_TRUE +AMDEP_FALSE +AMDEPBACKSLASH +CCDEPMODE +am__fastdepCC_TRUE +am__fastdepCC_FALSE +CPP +GREP +EGREP +HAVE_OPENSSL +LINKED_LDLIB +USE_RDYNAMIC +LIBOBJS +LTLIBOBJS' +ac_subst_files='' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` + eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/[-.]/_/g'` + eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute directory names. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { echo "$as_me: error: Working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$0" || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures Active port forwarder 0.8.4 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/apf] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of Active port forwarder 0.8.4:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-debug=no/yes turn on debugging + default=no + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + LIBS libraries to pass to the linker, e.g. -l<library> + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if + you have headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to <jeremian@poczta.fm>. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +Active port forwarder configure 0.8.4 +generated by GNU Autoconf 2.61 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. + + +Copyright (C) 2003-2007 jeremian - <jeremian [at] poczta.fm> +=================== + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +========================== + + The Active Port Forwarder program is part of the Gray-World.net projects. + + Our Gray-World Team presents on the http://gray-world.net website the projects + and publications we are working on which are related to the NACS (Network + Access Control System) bypassing research field and to the computer and + network security topics. + +================================================================================ + +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by Active port forwarder $as_me 0.8.4, which was +generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -n "$CONFIG_SITE"; then + set x "$CONFIG_SITE" +elif test "x$prefix" != xNONE; then + set x "$prefix/share/config.site" "$prefix/etc/config.site" +else + set x "$ac_default_prefix/share/config.site" \ + "$ac_default_prefix/etc/config.site" +fi +shift +for ac_site_file +do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +am__api_version="1.9" +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done +IFS=$as_save_IFS + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. echo might interpret backslashes. +# By default was `s,x,x', remove it if useless. +cat <<\_ACEOF >conftest.sed +s/[\\$]/&&/g;s/;s,x,x,$// +_ACEOF +program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +rm -f conftest.sed + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in + # $(mkdir_p) $(somedir) + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' +else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + for d in ./-p ./--version; + do + test -d $d && rmdir $d + done + # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. + if test -f "$ac_aux_dir/mkinstalldirs"; then + mkdir_p='$(mkinstalldirs)' + else + mkdir_p='$(install_sh) -d' + fi +fi + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { echo "$as_me:$LINENO: result: $AWK" >&5 +echo "${ECHO_T}$AWK" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } +set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + SET_MAKE= +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# test to see if srcdir already configured +if test "`cd $srcdir && pwd`" != "`pwd`" && + test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE=apf + VERSION=0.8.4 + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"$am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { echo "$as_me:$LINENO: result: $STRIP" >&5 +echo "${ECHO_T}$STRIP" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +echo "${ECHO_T}$ac_ct_STRIP" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + + +ac_config_headers="$ac_config_headers config.h" + +ac_config_files="$ac_config_files Makefile modules/Makefile src/Makefile" + + +CFLAGS="-pedantic -Wall -O2" + +# Enabling/disabling asserts and debugging +{ echo "$as_me:$LINENO: checking whether to enable debugging" >&5 +echo $ECHO_N "checking whether to enable debugging... $ECHO_C" >&6; } +# Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then + enableval=$enable_debug; +else + enable_debug=no +fi + +if test "x$enable_debug" = "xyes"; then + CFLAGS="$CFLAGS -g" + { echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } +else + CFLAGS="$CFLAGS -DNDEBUG" + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + +# Checks for programs. +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&5 +echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools +whose name does not start with the host triplet. If you think this +configuration is useful to you, please write to autoconf@gnu.org." >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO: checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +# +# List of possible output files, starting from the most likely. +# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) +# only as a last resort. b.out is created by i960 compilers. +ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' +# +# The IRIX 6 linker writes into existing files which may not be +# executable, retaining their permissions. Remove them first so a +# subsequent execution test works. +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi + +{ echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6; } +if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext + +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +{ echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6; } + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } +{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6; } + +{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6; } ;; + xno) + { echo "$as_me:$LINENO: result: unsupported" >&5 +echo "${ECHO_T}unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; +esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +{ echo "$as_me:$LINENO: result: $_am_result" >&5 +echo "${ECHO_T}$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + + +if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + + +depcc="$CC" am_compiler_list= + +{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + + +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Extract the first word of "grep ggrep" to use in msg output +if test -z "$GREP"; then +set dummy grep ggrep; ac_prog_name=$2 +if test "${ac_cv_path_GREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_GREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue + # Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_GREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +GREP="$ac_cv_path_GREP" +if test -z "$GREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_GREP=$GREP +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +echo "${ECHO_T}$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + # Extract the first word of "egrep" to use in msg output +if test -z "$EGREP"; then +set dummy egrep; ac_prog_name=$2 +if test "${ac_cv_path_EGREP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_path_EGREP_found=false +# Loop through the user's path and test for each of PROGNAME-LIST +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue + # Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + + $ac_path_EGREP_found && break 3 + done +done + +done +IFS=$as_save_IFS + + +fi + +EGREP="$ac_cv_path_EGREP" +if test -z "$EGREP"; then + { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } +fi + +else + ac_cv_path_EGREP=$EGREP +fi + + + fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +if test $ac_cv_c_compiler_gnu = yes; then + { echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 +echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6; } +if test "${ac_cv_prog_gcc_traditional+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_pattern="Autoconf.*'x'" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sgtty.h> +Autoconf TIOCGETP +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +else + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <termio.h> +Autoconf TCGETA +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 +echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6; } + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +for ac_prog in openssl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } +if test "${ac_cv_prog_HAVE_OPENSSL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$HAVE_OPENSSL"; then + ac_cv_prog_HAVE_OPENSSL="$HAVE_OPENSSL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_HAVE_OPENSSL="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +HAVE_OPENSSL=$ac_cv_prog_HAVE_OPENSSL +if test -n "$HAVE_OPENSSL"; then + { echo "$as_me:$LINENO: result: $HAVE_OPENSSL" >&5 +echo "${ECHO_T}$HAVE_OPENSSL" >&6; } +else + { echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6; } +fi + + + test -n "$HAVE_OPENSSL" && break +done + + +# Checks for libraries. + +{ echo "$as_me:$LINENO: checking for SSL_library_init in -lssl" >&5 +echo $ECHO_N "checking for SSL_library_init in -lssl... $ECHO_C" >&6; } +if test "${ac_cv_lib_ssl_SSL_library_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lssl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char SSL_library_init (); +int +main () +{ +return SSL_library_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_ssl_SSL_library_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_ssl_SSL_library_init=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_ssl_SSL_library_init" >&5 +echo "${ECHO_T}$ac_cv_lib_ssl_SSL_library_init" >&6; } +if test $ac_cv_lib_ssl_SSL_library_init = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSSL 1 +_ACEOF + + LIBS="-lssl $LIBS" + +else + + { { echo "$as_me:$LINENO: error: \"lib ssl not found!\"" >&5 +echo "$as_me: error: \"lib ssl not found!\"" >&2;} + { (exit 1); exit 1; }; } + +fi + + +{ echo "$as_me:$LINENO: checking for compress in -lz" >&5 +echo $ECHO_N "checking for compress in -lz... $ECHO_C" >&6; } +if test "${ac_cv_lib_z_compress+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lz $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char compress (); +int +main () +{ +return compress (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_z_compress=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_z_compress=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_z_compress" >&5 +echo "${ECHO_T}$ac_cv_lib_z_compress" >&6; } +if test $ac_cv_lib_z_compress = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBZ 1 +_ACEOF + + LIBS="-lz $LIBS" + +else + + { { echo "$as_me:$LINENO: error: \"zlib not found!\"" >&5 +echo "$as_me: error: \"zlib not found!\"" >&2;} + { (exit 1); exit 1; }; } + +fi + +{ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } +if test $ac_cv_lib_dl_dlopen = yes; then + + LINKED_LDLIB="-ldl" + USE_RDYNAMIC="-rdynamic" + +cat >>confdefs.h <<\_ACEOF +#define HAVE_LIBDL 1 +_ACEOF + + +else + + LINKED_LDLIB="" + USE_RDYNAMIC="" + +fi + + + + +{ echo "$as_me:$LINENO: checking for pthread_create in -lpthread" >&5 +echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6; } +if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_create (); +int +main () +{ +return pthread_create (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_pthread_pthread_create=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_pthread_pthread_create=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_create" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6; } +if test $ac_cv_lib_pthread_pthread_create = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBPTHREAD 1 +_ACEOF + + LIBS="-lpthread $LIBS" + +fi + + +{ echo "$as_me:$LINENO: checking for socket in -lsocket" >&5 +echo $ECHO_N "checking for socket in -lsocket... $ECHO_C" >&6; } +if test "${ac_cv_lib_socket_socket+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char socket (); +int +main () +{ +return socket (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_socket_socket=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_socket_socket=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_socket" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_socket" >&6; } +if test $ac_cv_lib_socket_socket = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBSOCKET 1 +_ACEOF + + LIBS="-lsocket $LIBS" + +fi + + +{ echo "$as_me:$LINENO: checking for gethostbyaddr in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyaddr in -lnsl... $ECHO_C" >&6; } +if test "${ac_cv_lib_nsl_gethostbyaddr+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char gethostbyaddr (); +int +main () +{ +return gethostbyaddr (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_nsl_gethostbyaddr=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_nsl_gethostbyaddr=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyaddr" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyaddr" >&6; } +if test $ac_cv_lib_nsl_gethostbyaddr = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBNSL 1 +_ACEOF + + LIBS="-lnsl $LIBS" + +fi + + +{ echo "$as_me:$LINENO: checking for X509_sign in -lcrypto" >&5 +echo $ECHO_N "checking for X509_sign in -lcrypto... $ECHO_C" >&6; } +if test "${ac_cv_lib_crypto_X509_sign+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcrypto $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char X509_sign (); +int +main () +{ +return X509_sign (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_crypto_X509_sign=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_crypto_X509_sign=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_crypto_X509_sign" >&5 +echo "${ECHO_T}$ac_cv_lib_crypto_X509_sign" >&6; } +if test $ac_cv_lib_crypto_X509_sign = yes; then + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBCRYPTO 1 +_ACEOF + + LIBS="-lcrypto $LIBS" + +fi + + +# Checks for header files. +{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#include <stdlib.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + + + + + + + + + + + + + + +for ac_header in arpa/inet.h fcntl.h limits.h netdb.h netinet/in.h stdlib.h string.h strings.h sys/ioctl.h sys/socket.h sys/time.h unistd.h sys/types.h pwd.h linux/sockios.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## --------------------------------- ## +## Report this to jeremian@poczta.fm ## +## --------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +# Checks for typedefs, structures, and compiler characteristics. +{ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 +echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6; } +if test "${ac_cv_c_const+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +/* FIXME: Include the comments suggested by Paul. */ +#ifndef __cplusplus + /* Ultrix mips cc rejects this. */ + typedef int charset[2]; + const charset cs; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this. */ + char *t; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; }; + struct s *b; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_const=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_const=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 +echo "${ECHO_T}$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +cat >>confdefs.h <<\_ACEOF +#define const +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking whether time.h and sys/time.h may both be included" >&5 +echo $ECHO_N "checking whether time.h and sys/time.h may both be included... $ECHO_C" >&6; } +if test "${ac_cv_header_time+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <sys/time.h> +#include <time.h> + +int +main () +{ +if ((struct tm *) 0) +return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_time=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_time=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_header_time" >&5 +echo "${ECHO_T}$ac_cv_header_time" >&6; } +if test $ac_cv_header_time = yes; then + +cat >>confdefs.h <<\_ACEOF +#define TIME_WITH_SYS_TIME 1 +_ACEOF + +fi + +{ echo "$as_me:$LINENO: checking whether struct tm is in sys/time.h or time.h" >&5 +echo $ECHO_N "checking whether struct tm is in sys/time.h or time.h... $ECHO_C" >&6; } +if test "${ac_cv_struct_tm+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <sys/types.h> +#include <time.h> + +int +main () +{ +struct tm tm; + int *p = &tm.tm_sec; + return !p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_struct_tm=time.h +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_struct_tm=sys/time.h +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_struct_tm" >&5 +echo "${ECHO_T}$ac_cv_struct_tm" >&6; } +if test $ac_cv_struct_tm = sys/time.h; then + +cat >>confdefs.h <<\_ACEOF +#define TM_IN_SYS_TIME 1 +_ACEOF + +fi + + +# Checks for library functions. + +for ac_header in stdlib.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## --------------------------------- ## +## Report this to jeremian@poczta.fm ## +## --------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5 +echo $ECHO_N "checking for GNU libc compatible malloc... $ECHO_C" >&6; } +if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_malloc_0_nonnull=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include <stdlib.h> +#else +char *malloc (); +#endif + +int +main () +{ +return ! malloc (0); + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_malloc_0_nonnull=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_malloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5 +echo "${ECHO_T}$ac_cv_func_malloc_0_nonnull" >&6; } +if test $ac_cv_func_malloc_0_nonnull = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MALLOC 1 +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define HAVE_MALLOC 0 +_ACEOF + + case " $LIBOBJS " in + *" malloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS malloc.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<\_ACEOF +#define malloc rpl_malloc +_ACEOF + +fi + + + + +for ac_header in stdlib.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## --------------------------------- ## +## Report this to jeremian@poczta.fm ## +## --------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5 +echo $ECHO_N "checking for GNU libc compatible realloc... $ECHO_C" >&6; } +if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_realloc_0_nonnull=no +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if defined STDC_HEADERS || defined HAVE_STDLIB_H +# include <stdlib.h> +#else +char *realloc (); +#endif + +int +main () +{ +return ! realloc (0, 0); + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_realloc_0_nonnull=yes +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_func_realloc_0_nonnull=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5 +echo "${ECHO_T}$ac_cv_func_realloc_0_nonnull" >&6; } +if test $ac_cv_func_realloc_0_nonnull = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_REALLOC 1 +_ACEOF + +else + cat >>confdefs.h <<\_ACEOF +#define HAVE_REALLOC 0 +_ACEOF + + case " $LIBOBJS " in + *" realloc.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS realloc.$ac_objext" + ;; +esac + + +cat >>confdefs.h <<\_ACEOF +#define realloc rpl_realloc +_ACEOF + +fi + + + + + +for ac_header in sys/select.h sys/socket.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +else + # Is the header compilable? +{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6; } + +# Is the header present? +{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## --------------------------------- ## +## Report this to jeremian@poczta.fm ## +## --------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval echo '${'$as_ac_Header'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +{ echo "$as_me:$LINENO: checking types of arguments for select" >&5 +echo $ECHO_N "checking types of arguments for select... $ECHO_C" >&6; } +if test "${ac_cv_func_select_args+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + for ac_arg234 in 'fd_set *' 'int *' 'void *'; do + for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do + for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#ifdef HAVE_SYS_SELECT_H +# include <sys/select.h> +#endif +#ifdef HAVE_SYS_SOCKET_H +# include <sys/socket.h> +#endif + +int +main () +{ +extern int select ($ac_arg1, + $ac_arg234, $ac_arg234, $ac_arg234, + $ac_arg5); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done + done +done +# Provide a safe default value. +: ${ac_cv_func_select_args='int,int *,struct timeval *'} + +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5 +echo "${ECHO_T}$ac_cv_func_select_args" >&6; } +ac_save_IFS=$IFS; IFS=',' +set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'` +IFS=$ac_save_IFS +shift + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG1 $1 +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG234 ($2) +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define SELECT_TYPE_ARG5 ($3) +_ACEOF + +rm -f conftest* + + +for ac_func in strftime +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +else + # strftime is in -lintl on SCO UNIX. +{ echo "$as_me:$LINENO: checking for strftime in -lintl" >&5 +echo $ECHO_N "checking for strftime in -lintl... $ECHO_C" >&6; } +if test "${ac_cv_lib_intl_strftime+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lintl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strftime (); +int +main () +{ +return strftime (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_lib_intl_strftime=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_intl_strftime=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_strftime" >&5 +echo "${ECHO_T}$ac_cv_lib_intl_strftime" >&6; } +if test $ac_cv_lib_intl_strftime = yes; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_STRFTIME 1 +_ACEOF + +LIBS="-lintl $LIBS" +fi + +fi +done + + +for ac_func in vprintf +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +{ echo "$as_me:$LINENO: checking for _doprnt" >&5 +echo $ECHO_N "checking for _doprnt... $ECHO_C" >&6; } +if test "${ac_cv_func__doprnt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define _doprnt innocuous__doprnt + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char _doprnt (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef _doprnt + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char _doprnt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub__doprnt || defined __stub____doprnt +choke me +#endif + +int +main () +{ +return _doprnt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + ac_cv_func__doprnt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func__doprnt=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5 +echo "${ECHO_T}$ac_cv_func__doprnt" >&6; } +if test $ac_cv_func__doprnt = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_DOPRNT 1 +_ACEOF + +fi + +fi +done + + + + + + + + + + +for ac_func in bzero gethostname gettimeofday memset select socket strtol getaddrinfo +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + + + + + + + + + + + + + + + + +for ac_func in SSL_library_init SSL_get_cipher_name SSL_get_cipher_version ERR_error_string ERR_get_error SSL_CTX_new SSL_CTX_set_cipher_list SSL_CTX_use_RSAPrivateKey_file SSL_CTX_use_certificate_file SSL_new SSL_clear SSL_write SSL_read SSL_accept SSL_set_fd SSL_connect SSL_load_error_strings SSL_get_error +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + +for ac_func in compress uncompress +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + + +for ac_func in dlopen dlsym dlclose +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +for ac_func in getpwnam +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +for ac_func in daemon +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + + +for ac_func in inet_ntop getnameinfo +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && + $as_test_x conftest$ac_exeext; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval echo '${'$as_ac_var'}'` + { echo "$as_me:$LINENO: result: $ac_res" >&5 +echo "${ECHO_T}$ac_res" >&6; } +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 +echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { echo "$as_me:$LINENO: updating cache $cache_file" >&5 +echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +as_nl=' +' +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir +fi +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by Active port forwarder $as_me 0.8.4, which was +generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <bug-autoconf@gnu.org>." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +Active port forwarder config.status 0.8.4 +configured by $0, generated by GNU Autoconf 2.61, + with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2006 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + CONFIG_SHELL=$SHELL + export CONFIG_SHELL + exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "modules/Makefile") CONFIG_FILES="$CONFIG_FILES modules/Makefile" ;; + "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# +# Set up the sed scripts for CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "$CONFIG_FILES"; then + +_ACEOF + + + +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + cat >conf$$subs.sed <<_ACEOF +SHELL!$SHELL$ac_delim +PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim +PACKAGE_NAME!$PACKAGE_NAME$ac_delim +PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim +PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim +PACKAGE_STRING!$PACKAGE_STRING$ac_delim +PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim +exec_prefix!$exec_prefix$ac_delim +prefix!$prefix$ac_delim +program_transform_name!$program_transform_name$ac_delim +bindir!$bindir$ac_delim +sbindir!$sbindir$ac_delim +libexecdir!$libexecdir$ac_delim +datarootdir!$datarootdir$ac_delim +datadir!$datadir$ac_delim +sysconfdir!$sysconfdir$ac_delim +sharedstatedir!$sharedstatedir$ac_delim +localstatedir!$localstatedir$ac_delim +includedir!$includedir$ac_delim +oldincludedir!$oldincludedir$ac_delim +docdir!$docdir$ac_delim +infodir!$infodir$ac_delim +htmldir!$htmldir$ac_delim +dvidir!$dvidir$ac_delim +pdfdir!$pdfdir$ac_delim +psdir!$psdir$ac_delim +libdir!$libdir$ac_delim +localedir!$localedir$ac_delim +mandir!$mandir$ac_delim +DEFS!$DEFS$ac_delim +ECHO_C!$ECHO_C$ac_delim +ECHO_N!$ECHO_N$ac_delim +ECHO_T!$ECHO_T$ac_delim +LIBS!$LIBS$ac_delim +build_alias!$build_alias$ac_delim +host_alias!$host_alias$ac_delim +target_alias!$target_alias$ac_delim +INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim +INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim +INSTALL_DATA!$INSTALL_DATA$ac_delim +CYGPATH_W!$CYGPATH_W$ac_delim +PACKAGE!$PACKAGE$ac_delim +VERSION!$VERSION$ac_delim +ACLOCAL!$ACLOCAL$ac_delim +AUTOCONF!$AUTOCONF$ac_delim +AUTOMAKE!$AUTOMAKE$ac_delim +AUTOHEADER!$AUTOHEADER$ac_delim +MAKEINFO!$MAKEINFO$ac_delim +install_sh!$install_sh$ac_delim +STRIP!$STRIP$ac_delim +INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim +mkdir_p!$mkdir_p$ac_delim +AWK!$AWK$ac_delim +SET_MAKE!$SET_MAKE$ac_delim +am__leading_dot!$am__leading_dot$ac_delim +AMTAR!$AMTAR$ac_delim +am__tar!$am__tar$ac_delim +am__untar!$am__untar$ac_delim +CC!$CC$ac_delim +CFLAGS!$CFLAGS$ac_delim +LDFLAGS!$LDFLAGS$ac_delim +CPPFLAGS!$CPPFLAGS$ac_delim +ac_ct_CC!$ac_ct_CC$ac_delim +EXEEXT!$EXEEXT$ac_delim +OBJEXT!$OBJEXT$ac_delim +DEPDIR!$DEPDIR$ac_delim +am__include!$am__include$ac_delim +am__quote!$am__quote$ac_delim +AMDEP_TRUE!$AMDEP_TRUE$ac_delim +AMDEP_FALSE!$AMDEP_FALSE$ac_delim +AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim +CCDEPMODE!$CCDEPMODE$ac_delim +am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim +am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim +CPP!$CPP$ac_delim +GREP!$GREP$ac_delim +EGREP!$EGREP$ac_delim +HAVE_OPENSSL!$HAVE_OPENSSL$ac_delim +LINKED_LDLIB!$LINKED_LDLIB$ac_delim +USE_RDYNAMIC!$USE_RDYNAMIC$ac_delim +LIBOBJS!$LIBOBJS$ac_delim +LTLIBOBJS!$LTLIBOBJS$ac_delim +_ACEOF + + if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 82; then + break + elif $ac_last_try; then + { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` +if test -n "$ac_eof"; then + ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` + ac_eof=`expr $ac_eof + 1` +fi + +cat >>$CONFIG_STATUS <<_ACEOF +cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end +_ACEOF +sed ' +s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g +s/^/s,@/; s/!/@,|#_!!_#|/ +:n +t n +s/'"$ac_delim"'$/,g/; t +s/$/\\/; p +N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n +' >>$CONFIG_STATUS <conf$$subs.sed +rm -f conf$$subs.sed +cat >>$CONFIG_STATUS <<_ACEOF +:end +s/|#_!!_#|//g +CEOF$ac_eof +_ACEOF + + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF +fi # test -n "$CONFIG_FILES" + + +for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 +echo "$as_me: error: Invalid tag $ac_tag." >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + ac_file_inputs="$ac_file_inputs $ac_f" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input="Generated from "`IFS=: + echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + fi + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin";; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +case `sed -n '/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' $ac_file_inputs` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s&@configure_input@&$configure_input&;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out"; rm -f "$tmp/out";; + *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac + ;; + :H) + # + # CONFIG_HEADER + # +_ACEOF + +# Transform confdefs.h into a sed script `conftest.defines', that +# substitutes the proper values into config.h.in to produce config.h. +rm -f conftest.defines conftest.tail +# First, append a space to every undef/define line, to ease matching. +echo 's/$/ /' >conftest.defines +# Then, protect against being on the right side of a sed subst, or in +# an unquoted here document, in config.status. If some macros were +# called several times there might be several #defines for the same +# symbol, which is useless. But do not sort them, since the last +# AC_DEFINE must be honored. +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where +# NAME is the cpp macro being defined, VALUE is the value it is being given. +# PARAMS is the parameter list in the macro definition--in most cases, it's +# just an empty string. +ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' +ac_dB='\\)[ (].*,\\1define\\2' +ac_dC=' ' +ac_dD=' ,' + +uniq confdefs.h | + sed -n ' + t rset + :rset + s/^[ ]*#[ ]*define[ ][ ]*// + t ok + d + :ok + s/[\\&,]/\\&/g + s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p + s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p + ' >>conftest.defines + +# Remove the space that was appended to ease matching. +# Then replace #undef with comments. This is necessary, for +# example, in the case of _POSIX_SOURCE, which is predefined and required +# on some systems where configure will not decide to define it. +# (The regexp can be short, since the line contains either #define or #undef.) +echo 's/ $// +s,^[ #]*u.*,/* & */,' >>conftest.defines + +# Break up conftest.defines: +ac_max_sed_lines=50 + +# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" +# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" +# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" +# et cetera. +ac_in='$ac_file_inputs' +ac_out='"$tmp/out1"' +ac_nxt='"$tmp/out2"' + +while : +do + # Write a here document: + cat >>$CONFIG_STATUS <<_ACEOF + # First, check the format of the line: + cat >"\$tmp/defines.sed" <<\\CEOF +/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def +/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def +b +:def +_ACEOF + sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF + sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS + ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in + sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail + grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines +done +rm -f conftest.defines conftest.tail + +echo "ac_result=$ac_in" >>$CONFIG_STATUS +cat >>$CONFIG_STATUS <<\_ACEOF + if test x"$ac_file" != x-; then + echo "/* $configure_input */" >"$tmp/config.h" + cat "$ac_result" >>"$tmp/config.h" + if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f $ac_file + mv "$tmp/config.h" $ac_file + fi + else + echo "/* $configure_input */" + cat "$ac_result" + fi + rm -f "$tmp/out12" +# Compute $ac_file's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || +$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| . 2>/dev/null || +echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 +echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # So let's grep whole file. + if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + + esac +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff --git a/configure.ac b/configure.ac new file mode 100644 index 0000000..5e63907 --- /dev/null +++ b/configure.ac @@ -0,0 +1,99 @@ +# -*- Autoconf -*- +# Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.59) +AC_INIT([Active port forwarder], [0.8.4], [jeremian@poczta.fm], [apf]) +AM_INIT_AUTOMAKE([apf], [0.8.4]) +AC_COPYRIGHT([ +Copyright (C) 2003-2007 jeremian - <jeremian [[at]] poczta.fm> +=================== + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +========================== + + The Active Port Forwarder program is part of the Gray-World.net projects. + + Our Gray-World Team presents on the http://gray-world.net website the projects + and publications we are working on which are related to the NACS (Network + Access Control System) bypassing research field and to the computer and + network security topics. + +================================================================================ +]) +AC_CONFIG_SRCDIR([src/afserver.c]) +AM_CONFIG_HEADER([config.h]) +AC_CONFIG_FILES([Makefile + modules/Makefile + src/Makefile]) + +CFLAGS="-pedantic -Wall -O2" + +# Enabling/disabling asserts and debugging +AC_MSG_CHECKING(whether to enable debugging) +AC_ARG_ENABLE(debug, [ --enable-debug=[no/yes] turn on debugging + [default=no]],, enable_debug=no) +if test "x$enable_debug" = "xyes"; then + CFLAGS="$CFLAGS -g" + AC_MSG_RESULT(yes) +else + CFLAGS="$CFLAGS -DNDEBUG" + AC_MSG_RESULT(no) +fi + +# Checks for programs. +AC_PROG_CC +AC_PROG_GCC_TRADITIONAL +AC_CHECK_PROGS(HAVE_OPENSSL, [openssl]) + +# Checks for libraries. +AC_CHECK_LIB([ssl], [SSL_library_init], [], + [ + AC_ERROR("lib ssl not found!") + ]) +AC_CHECK_LIB([z], [compress], [], + [ + AC_ERROR("zlib not found!") + ]) +AC_CHECK_LIB([dl], [dlopen], + [ + LINKED_LDLIB="-ldl" + USE_RDYNAMIC="-rdynamic" + AC_DEFINE(HAVE_LIBDL, 1, [Define to 1 if you have the `dl' library (-ldl).]) + ], + [ + LINKED_LDLIB="" + USE_RDYNAMIC="" + ]) +AC_SUBST(LINKED_LDLIB) +AC_SUBST(USE_RDYNAMIC) +AC_CHECK_LIB([pthread], [pthread_create], [], []) +AC_CHECK_LIB([socket], [socket], [], []) +AC_CHECK_LIB([nsl], [gethostbyaddr], [], []) +AC_CHECK_LIB([crypto], [X509_sign], [], []) + +# Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS([arpa/inet.h fcntl.h limits.h netdb.h netinet/in.h stdlib.h string.h strings.h sys/ioctl.h sys/socket.h sys/time.h unistd.h sys/types.h pwd.h linux/sockios.h]) + +# Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_HEADER_TIME +AC_STRUCT_TM + +# Checks for library functions. +AC_FUNC_MALLOC +AC_FUNC_REALLOC +AC_FUNC_SELECT_ARGTYPES +AC_FUNC_STRFTIME +AC_FUNC_VPRINTF +AC_CHECK_FUNCS([bzero gethostname gettimeofday memset select socket strtol getaddrinfo]) +AC_CHECK_FUNCS([SSL_library_init SSL_get_cipher_name SSL_get_cipher_version ERR_error_string ERR_get_error SSL_CTX_new SSL_CTX_set_cipher_list SSL_CTX_use_RSAPrivateKey_file SSL_CTX_use_certificate_file SSL_new SSL_clear SSL_write SSL_read SSL_accept SSL_set_fd SSL_connect SSL_load_error_strings SSL_get_error]) +AC_CHECK_FUNCS([compress uncompress]) +AC_CHECK_FUNCS([dlopen dlsym dlclose]) +AC_CHECK_FUNCS([getpwnam]) +AC_CHECK_FUNCS([daemon]) +AC_CHECK_FUNCS([inet_ntop getnameinfo]) + +AC_OUTPUT @@ -0,0 +1,530 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2005-07-09.11 + +# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by `PROGRAMS ARGS'. + object Object file output by `PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputing dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to <bug-automake@gnu.org>. +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. + "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the `deleted header file' problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' ' +' < "$tmpdepfile" | +## Some versions of gcc put a space before the `:'. On the theory +## that the space means something, we add a space to the output as +## well. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like `#:fec' to the end of the + # dependency line. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr ' +' ' ' >> $depfile + echo >> $depfile + + # The second pass generates a dummy entry for each header file. + tr ' ' ' +' < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> $depfile + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts `$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` + tmpdepfile="$stripped.u" + if test "$libtool" = yes; then + "$@" -Wc,-M + else + "$@" -M + fi + stat=$? + + if test -f "$tmpdepfile"; then : + else + stripped=`echo "$stripped" | sed 's,^.*/,,'` + tmpdepfile="$stripped.u" + fi + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + + if test -f "$tmpdepfile"; then + outname="$stripped.o" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler understands `-MD -MF file'. However on + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using \ : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h', + # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + # Some versions of the HPUX 10.20 sed can't process this invocation + # correctly. Breaking it into two sed invocations is a workaround. + sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | + sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in `foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mecanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + # That's a tab and a space in the []. + sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' ' +' < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no + for arg in "$@"; do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix="`echo $object | sed 's/^.*\././'`" + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' ' +' | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi + + # Remove `-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o, + # because we must use -o when running libtool. + "$@" || exit $? + IFS=" " + for arg + do + case "$arg" in + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" + echo " " >> "$depfile" + . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/doc/afclient.1 b/doc/afclient.1 new file mode 100644 index 0000000..677ec7a --- /dev/null +++ b/doc/afclient.1 @@ -0,0 +1,344 @@ +.TH afclient 1 "apf 0.8.4" Jeremian +.SH NAME +afclient \- active port forwarder client +.SH SYNOPSIS +.B afclient [ +.I options +.B ] -n +.I servername +.B -p +.I portnum +.SH DESCRIPTION +.B Afclient +is a port forwarding program designed to be efficient and easy to use. It connects to +.B afserver +to listenport (default listenport is 50126) and after a successful authorization +.B afclient +redirects all the data to the specified destination host:port. +.SH "EXAMPLES" +.B afclient -n servername -p 22 + program connects to servername:50126 and redirects data to local port 22 (becomes a daemon) + +.B afclient -n servername -p 22 -v + the same as above, but verbose mode is enabled (program won't enter daemon mode) + +.B afclient -n servername -r + program connects to servername:50126 in remote administration mode +.SH OPTIONS +.I "Basic options" + +.B -n, --servername NAME + name of the host, where +.I afserver +is running (required) + +.B -m, --manageport PORT + manage port number - server must be listening on it (default: 50126) + +.B -d, --hostname NAME + the name of this host/remote host - the final destination of the packets (default: the name returned by hostname function) + +.B -p, --portnum PORT + the port we are forwarding connection to (required) + +.B --localname NAME + local machine name for connection with afserver (used to bind socket to different interfaces) + +.B --localport NAME + local port name for connection with afserver (used to bind socket to different addressees) + +.B --localdesname NAME + local machine name for connections with destination application (used to bind socket to different interfaces) + +.B -V, --version + display version number + +.B -h, --help + prints help screen + +.I Authorization + +.B -i, --id STRING + sends the id string to afserver + +.B --pass PASSWORD + set the password used for client identification (default: no password) + +.B --ignorepkeys + ignore invalid server's public keys + +.I Configuration + +.B -k, --keyfile FILE + the name of the file with RSA key (default: client.rsa) + +.B -c, --cerfile + the name of the file with certificate (default: no certificate used) + +.B -f, --cfgfile FILE + the name of the file with the configuration for the +.I afclient + +.B -s, --storefile + the name of the file with stored public keys (default: known_hosts) + +.B -D, --dateformat FORMAT + format of the date printed in logs (see 'man strftime' for details) (default: %d.%m.%Y %H:%M:%S) + +.B -K, --keep-alive N + send keepalive packets every N seconds (default: not send keepalive packets) + +.I Auto-reconnection + +.B --ar-start + enable auto-reconnection when afserver is not reachable on start (default: disabled) + +.B --ar-quit + enable auto-reconnection after normal afserver quit (default: disabled) + +.B --noar + disable auto-reconnection after premature afserver quit (default: enabled) + +.B -A, --ar-tries N + try N times to reconnect (default: unlimited) + +.B -T, --ar-delay N + wait N seconds between reconnect tries (default: 5) + +.I Modes + +.B -u, --udpmode + udp mode - client will use udp protocol to communicate with the hostname:portnum + +.B -U, --reverseudp + reverse udp forwarding. Udp packets will be forwarded from hostname:portnum to the server name:manageport + +.B -r, --remoteadmin + remote administration mode. (using '-p PORT' will force afclient to use port rather than stdin-stdout) + +.I Logging + +.B -o, --log LOGCMD + log choosen information to file/socket + +.B -v, --verbose + to be verbose - program won't enter the daemon mode (use several times for greater effect) + +.I "IP family" + +.B -4, --ipv4 + use ipv4 only + +.B -6, --ipv6 + use ipv6 only + +.I Modules + +.B -l, --load + load a module for user's packets filtering + +.B -L, --Load + load a module for service's packets filtering + +.I HTTP/HTTPS PROXY + +.B -S, --use-https + use https proxy instead of http proxy + +.B -P, --proxyname + the name of the machine with proxy server + +.B -X, --proxyport + the port used by proxy server (default: 8080) + +.B -C, --pa-cred U:P + the user (U) and password (P) used in proxy authorization + +.B -B, --pa-t-basic + the Basic type of proxy authorization (default) + +.SH "REMOTE ADMINISTRATION" + +Remote administration mode is enabled by +.B '-r, --remoteadmin' +option. Required options: +.B '-n, --servername NAME' + +After successful authorization stdin/stdout are used to communicate with user. All the commands parsing is done by +.BR afserver . +Commands guaranteed to be available: + +.B help + display help + +.B lcmd + lists available commands + +.B quit + quit connection + +For list of all available commands take a look at +.BR afserver (1). + +When +.B '-p, --portnum PORT' +is used, +.B afclient +listens for connection from user at NAME:PORT. NAME is set by +.B '-d, --hostname' +option or hostname() function, when the option is missing. + +When user quits (close the connection or send +.B 'quit' +command), +.B afclient +exits. + +.SH "LOGCMD FORMAT" + +.B LOGCMD +has the following synopsis: +.B target,description,msgdesc + +Where +.B target +is +.B file +or +.B sock + +.B description +is +.B filename +or +.B host,port + +and +.B msgdesc +is the subset of: + +.B LOG_T_ALL, +.B LOG_T_USER, +.B LOG_T_CLIENT, +.B LOG_T_INIT, +.B LOG_T_MANAGE, +.B LOG_T_MAIN, +.B LOG_I_ALL, +.B LOG_I_CRIT, +.B LOG_I_DEBUG, +.B LOG_I_DDEBUG, +.B LOG_I_INFO, +.B LOG_I_NOTICE, +.B LOG_I_WARNING, +.B LOG_I_ERR + +written without spaces. + + Example: + + file,logfile,LOG_T_USER,LOG_T_CLIENT,LOG_I_INFO,LOG_I_NOTICE + +.SH MODULES + +.B Afclient +can use external modules for user's packets filtering +.RB ( "'-l, --load'" ) +and service's packets filtering +.RB ( "'-L, --Load'" ). +Module file has to declare three functions: + +.BI "char* info(" void ); + + info() return values: + - info about module + + Example: + + char* + info(void) + { + return "Module tester v0.1"; + } + +.BI "int allow(char* " host ", char* " port ); + + allow() return values: + 0 - allow to connect + !0 - drop the connection + + Example: + + int + allow(char* host, char* port) + { + return 0; /* allow to connect */ + } + +.BI "int filter(char* " host ", unsigned char* " message ", int* " length ); + + filter() return values: + 0 - allow to transfer + 1 - drop the packet + 2 - drop the connection + 3 - release the module + 4 - drop the packet and release the module + 5 - drop the connection and release the module + + Example: + + int + filter(char* host, unsigned char* message, int* length) + { + int i; + for (i = 1; i < *length; ++i) { + if (message[i-1] == 'M') { + if (message[i] == '1') { + return 1; /* ignored */ + } + if (message[i] == '2') { + return 2; /* dropped */ + } + if (message[i] == '3') { + return 3; /* release */ + } + if (message[i] == '4') { + return 4; /* ignored + release */ + } + if (message[i] == '5') { + return 5; /* dropped + release */ + } + } + } + return 0; /* allow to transfer */ + } + +Modules have to be compiled with +.B -fPIC -shared +options. + +.SH "SEE ALSO" + +.BR afclient.conf (5), +.BR afserver (1), +.BR afserver.conf (5) + +.SH BUGS + +.B Afclient +is still under development. There are no known open bugs at the moment. + +.SH "REPORTING BUGS" + +Please report bugs to <jeremian [at] poczta.fm> + +.SH AUTHOR + +Jeremian <jeremian [at] poczta.fm> + +.SH CONTRIBUTIONS + +Alex Dyatlov <alex [at] gray-world.net>, Simon <scastro [at] entreelibre.com>, Ilia Perevezentsev <iliaper [at] mail.ru>, Marco Solari <marco.solari [at] koinesistemi.it>, and Joshua Judson Rosen <rozzin [at] geekspace.com> + +.SH LICENSE + +Active Port Forwarder is distributed under the terms of the GNU General Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm>. See the file COPYING for details. diff --git a/doc/afclient.conf.5 b/doc/afclient.conf.5 new file mode 100644 index 0000000..4f8a5c6 --- /dev/null +++ b/doc/afclient.conf.5 @@ -0,0 +1,152 @@ +.TH afclient.conf 5 "apf 0.8.4" Jeremian +.SH NAME +afclient.conf \- Configuration File for afclient +.SH INTRODUCTION +.B Afclient +supports several mechanisms to supply configuration and run-time parameters: command line options, +.B afclient.conf +and hard-coded defaults. When the same information is supplied in more than one way, the highest precedence mechanism is used. When configuration file is used (option: +.IR "-f FILE") +command line options like +.IR --reverseudp , +.IR --udpmode , +.IR --remoteadmin , +.IR --load , +.I --Load +and +.I --pass +are ignored. Options from configuration file are taken before values from command line (with the exception of +.IR --keyfile , +.IR --storefile , +.IR --dateformat , +.IR --ignorepkeys +and the options connected with http proxy and auto-reconnect support). When something is not declared, hard-coded values are used. + +.SH DESCRIPTION +.B Afclient +uses configuration file, which name is supplied by the +.I -f FILE +option. The +.B afclient.conf +file is the set of command-line like options, which can be written in any order. + +.SH "OPTIONS" + +.B servername NAME + name of the host, where +.I afserver +is running + +.B manageport PORT + manage port number - server must be listening on it (default: 50126) + +.B hostname NAME + the name of this host/remote host - the final destination of the packets (default: the name returned by hostname function) + +.B portnum PORT + the port we are forwarding connection to + +.B localname NAME + local machine name for connection with afserver (used to bind socket to different interfaces) + +.B localport NAME + local port name for connection with afserver (used to bind socket to different addressees) + +.B localdesname NAME + local machine name for connections with destination application (used to bind socket to different interfaces) + +.B id STRING + sends the id string to afserver + +.B pass PASSWORD + set the password used for client identification (default: no password) + +.B ignorepkeys + ignore invalid server's public keys + +.B keyfile FILE + the name of the file with RSA key (default: client.rsa) + +.B cerfile FILE + the name of the file with certificate (default: no certificate used) + +.B storefile FILE + the name of the file with stored public keys (default: known_hosts) + +.B dateformat FORMAT + format of the date printed in logs (see 'man strftime' for details) (default: %d.%m.%Y %H:%M:%S). Format string is trimmed. In order to include white characters into format string, use dots to mark beginning and end of the text. If the dot is first or last character, it's removed. Only one character from the beginning and one from the end can be removed. + +.B keep-alive N + send keepalive packets every N seconds (default: not send keepalive packets) + +.B ar-start + enable auto-reconnection when afserver is not reachable on start (default: disabled) + +.B ar-quit + enable auto-reconnection after normal afserver quit (default: disabled) + +.B noar + disable auto-reconnection after premature afserver quit (default: enabled) + +.B ar-tries N + try N times to reconnect (default: unlimited) + +.B ar-delay N + wait N seconds between reconnect tries (default: 5) + +.B udpmode + udp mode - client will use udp protocol to communicate with the hostname:portnum + +.B reverseudp + reverse udp forwarding. Udp packets will be forwarded from hostname:portnum to the server name:manageport + +.B remoteadmin + remote administration mode. (using '-p PORT' will force afclient to use port rather than stdin-stdout) + +.B log LOGCMD + log choosen information to file/socket + +.B ipv4 + use ipv4 only + +.B ipv6 + use ipv6 only + +.B load FILE + load a module for user's packets filtering + +.B Load FILE + load a module for service's packets filtering + +.B use-https + use https proxy instead of http proxy + +.B proxyname NAME + the name of the machine with proxy server + +.B proxyport PORT + the port used by proxy server (default: 8080) + +.B pa-cred U:P + the user (U) and password (P) used in proxy authorization + +.B pa-t-basic + the Basic type of proxy authorization (default) + +.SH "SEE ALSO" + +.BR afserver.conf (5), +.BR afclient (1), +.BR afserver (1) + +.SH AUTHOR + +Jeremian <jeremian [at] poczta.fm> + +.SH CONTRIBUTIONS + +Alex Dyatlov <alex [at] gray-world.net>, Simon <scastro [at] entreelibre.com>, Ilia Perevezentsev <iliaper [at] mail.ru>, Marco Solari <marco.solari [at] koinesistemi.it>, and Joshua Judson Rosen <rozzin [at] geekspace.com> + +.SH LICENSE + +Active Port Forwarder is distributed under the terms of the GNU General Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm>. See the file COPYING for details. diff --git a/doc/afclient_example.conf b/doc/afclient_example.conf new file mode 100644 index 0000000..d336ce3 --- /dev/null +++ b/doc/afclient_example.conf @@ -0,0 +1,54 @@ +# This is an example configuration file for active port forwarder (client) + +#servername <yourservername> #name of the server to connect to (required) +#manageport 50126 #manage port number (default: 50126) +#hostname <yourhostname> #the name of the destination host (default: + # the name returned by hostname function) +#portnum 22 #the destination port of the tunnel (required) + +#localname <localname> #local machine name for connection with afserver +#localport <localport> #local port name for connection with afserver +#localdesname <localdesname> #local machine name for connections with destination application + +#id example client's id #sends the id string to afserver +#pass password #set the password used for client identification +#ignorepkeys #ignore invalid server's public keys + +#keyfile client.rsa #the name of the file with RSA key (default: client.rsa) +#cerfile filename #the name of the file with certificate (default: no certificate used) +#storefile known_hosts #the name of the file with stored public keys (default: known_hosts) +#dateformat %Y-%m-%d %H:%M:%S #format of the date printed in logs (default: %Y-%m-%d %H:%M:%S) +#keep-alive 15 #send keepalive packets every N seconds (default: not send keepalive packets) + +#ar-start #enable auto-reconnection when afserver is not reachable on start + # (default: disabled) +#ar-quit #enable auto-reconnection after normal afserver quit (default: disabled) +#noar #disable auto-reconnection after premature afserver quit (default: enabled) + +#ar-tries 10 #try N times to reconnect (default: unlimited) +#ar-delay 10 #wait N seconds between reconnect tries (default: 5) + +#udpmode #udp mode - client will use udp protocol to communicate with + # the hostname:portnum (-p) +#reverseudp #reverse udp forwarding. Udp packets will be forwarded + # from hostname:portnum to the server name:manageport +#remoteadmin #remote administration mode. (using '-p #port' will + # force afclient to use port rather than stdin-stdout) + +# Logging can be enabled by log option. The argument to this option must +# be in the form: +# target,description,msgdesc + +#log file,clogfile,LOG_T_ALL,LOG_I_CRIT,LOG_I_ERR,LOG_I_WARNING + +#ipv4 #use ipv4 only +#ipv6 #use ipv6 only + +#load usermodule #load a module for user's packets filtering +#Load servicemodule #load a module for service's packets filtering + +#use-https #use https proxy instead of http proxy +#proxyname httpproxy #the name of the machine with proxy server +#proxyport 8080 #the port used by proxy server (default: 8080) +#pa-cred user:password #the user (U) and password (P) used in proxy authorization +#pa-t-basic #the Basic type of proxy authorization (default) diff --git a/doc/afserver.1 b/doc/afserver.1 new file mode 100644 index 0000000..887d79b --- /dev/null +++ b/doc/afserver.1 @@ -0,0 +1,249 @@ +.TH afserver 1 "apf 0.8.4" Jeremian +.SH NAME +afserver \- active port forwarder server +.SH SYNOPSIS +.B afserver [ +.I options +.B ] +.SH DESCRIPTION +.B Afserver +is a port forwarding program designed to be efficient and easy to use. It listens for incoming +.B afclient +connections at listenport (default listenport is 50126). After successful client authorization, +.B afserver +listens for incoming user connections. When a new user connection is opened, all the data is redirected to previously connected +.B afclient, +which redirects it to the specified destination host:port. +.SH EXAMPLES +.B afserver + program starts with default options (become a daemon) + +.B afserver -v + verbose mode is enabled (program won't enter daemon mode) + +.B afserver -n localhost -l 5435 -m 6375 + program will listen on localhost:5435 for users and on localhost:6375 for clients +.SH OPTIONS +.I "Basic options" + +.B -n, --hostname NAME + used when creating listening sockets (default: '') + +.B -l, --listenport [HOST:]PORT + listening [host:]port number - users connect to it (default: 50127) + +.B -m, --manageport [HOST:]PORT + manage [host:]port number - +.I afclient +connects to it (default: 50126) + +.B -V, --version + display version number + +.B -h, --help + prints help screen + +.I Authorization + +.B --pass PASSWORD + password used for client identification (default: no password) + +.I Configuration + +.B -c, --cerfile FILE + the name of the file with certificate (default: server-cert.pem) + +.B -A, --cacerfile FILE + the name of the file with CA certificates (if used, require clients to have valid certificates) + +.B -d, --cerdepth + the maximum depth of valid certificate-chains + +.B -k, --keyfile FILE + the name of the file with RSA key (default: server.rsa) + +.B -f, --cfgfile FILE + the name of the file with the configuration for the +.I afserver + +.B -D, --dateformat FORMAT + format of the date printed in logs (see 'man strftime' for details) (default: %d.%m.%Y %H:%M:%S) + +.B -t, --timeout N + the timeout value for the client's connection (default: 5) + +.B --maxidle N + the maximum idle time for the client's connection (default: disabled) + +.B -u, --users N + the amount of users allowed to use this server (default: 5) + +.B -C, --clients N + the number of allowed clients to use this server (default: 1) + +.B -r, --realm + set the realm name (default: none) + +.B -R, --raclients N + the number of allowed clients in remote administration mode to use this server (default: 1) + +.B -U, --usrpcli N + the number of allowed users per client (default: $users) + +.B -M, --climode N + strategy used to connect users with clients (default: 1) + Available strategies: + 1. fill first client before go to next + +.B -p, --proto TYPE + type of server (tcp|udp) - what protocol it will be operating for (default: tcp) + +.B -b, --baseport + listenports are temporary and differ for each client + +.B -a, --audit + additional information about connections are logged + +.B --nossl + ssl is not used to transfer data (but it's still used to establish a connection) (default: ssl is used) + +.B --nozlib + zlib is not used to compress data (default: zlib is used) + +.B --dnslookups + try to obtain dns names of the computers rather than their numeric IP + +.I Logging + +.B -o, --log LOGCMD + log choosen information to file/socket + +.B -v, --verbose + to be verbose - program won't enter the daemon mode (use several times for greater effect) + +.I "IP family" + +.B -4, --ipv4 + use ipv4 only + +.B -6, --ipv6 + use ipv6 only + +.I HTTP PROXY + +.B -P, --enableproxy + enable http proxy mode + +.SH "REMOTE ADMINISTRATION" + +Currently available commands are: + +.B help + display help + +.B lcmd + lists available commands + +.B info + prints info about server + +.B rshow + display realms + +.B cshow X + display clients in X realm + +.B ushow X + display users in X realm + +.B quit + quit connection + +.B timeout N X + set timeout value in X realm + +.B audit {0|1} X + set audit mode in X realm + +.B dnslookups {0|1} X + set dnslookups mode in X realm + +.B dateformat S + set dateformat + +.B kuser S + kick user named S + +.B kclient N + kick client with number N + +.SH "LOGCMD FORMAT" + +.B LOGCMD +has the following synopsis: +.B target,description,msgdesc + +Where +.B target +is +.B file +or +.B sock + +.B description +is +.B filename +or +.B host,port + +and +.B msgdesc +is the subset of: + +.B LOG_T_ALL, +.B LOG_T_USER, +.B LOG_T_CLIENT, +.B LOG_T_INIT, +.B LOG_T_MANAGE, +.B LOG_T_MAIN, +.B LOG_I_ALL, +.B LOG_I_CRIT, +.B LOG_I_DEBUG, +.B LOG_I_DDEBUG, +.B LOG_I_INFO, +.B LOG_I_NOTICE, +.B LOG_I_WARNING, +.B LOG_I_ERR + +written without spaces. + + Example: + + file,filename,LOG_T_ALL,LOG_I_CRIT,LOG_I_ERR,LOG_I_WARNING + +.SH "SEE ALSO" + +.BR afserver.conf (5), +.BR afclient (1), +.BR afclient.conf (5) + +.SH BUGS + +.B Afserver +is still under development. There are no known open bugs at the moment. + +.SH "REPORTING BUGS" + +Please report bugs to <jeremian [at] poczta.fm> + +.SH AUTHOR + +Jeremian <jeremian [at] poczta.fm> + +.SH CONTRIBUTIONS + +Alex Dyatlov <alex [at] gray-world.net>, Simon <scastro [at] entreelibre.com>, Ilia Perevezentsev <iliaper [at] mail.ru> Marco Solari <marco.solari [at] koinesistemi.it>, and Joshua Judson Rosen <rozzin [at] geekspace.com> + +.SH LICENSE + +Active Port Forwarder is distributed under the terms of the GNU General Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm>. See the file COPYING for details. diff --git a/doc/afserver.conf.5 b/doc/afserver.conf.5 new file mode 100644 index 0000000..c62e105 --- /dev/null +++ b/doc/afserver.conf.5 @@ -0,0 +1,138 @@ +.TH afserver.conf 5 "apf 0.8.4" Jeremian +.SH NAME +afserver.conf \- Configuration File for afserver +.SH INTRODUCTION +.B Afserver +supports several mechanisms to supply configuration and run-time parameters: command line options, +.B afserver.conf +and hard-coded defaults. When the same information is supplied in more than one way, the highest precedence mechanism is used. When configuration file is used (option: +.IR "-f FILE") +command line options like +.IR --hostname , +.IR --listenport , +.I --manageport +and +.I --pass +are ignored. Options from configuration file are taken before values from command line (with the exception of +.IR --cerfile , +.I --keyfile +and +.I --dateformat +). When something is not declared, hard-coded values are used. + +.SH DESCRIPTION +.B Afserver +uses configuration file, which name is supplied by the +.I -f FILE +option. The +.B afserver.conf +file is composed of two sections which have to be in fixed order. In first section global values like cerfile, keyfile and logging options are set. The second section starts with first +.B realm +command and includes options describing specific realms. There may be several +.B realm +commands. + +.SH "GLOBAL OPTIONS" + +.B cerfile FILE + the name of the file with certificate (default: server-cert.pem) + +.B cacerfile FILE + the name of the file with CA certificates (if used, require clients to have valid certificates) + +.B cerdepth N + the maximum depth of valid certificate-chains + +.B keyfile FILE + the name of the file with RSA key (default: server.rsa) + +.B log LOGCMD + log choosen information to file/socket + +.B dateformat FORMAT + format of the date printed in logs (see 'man strftime' for details) (default: %d.%m.%Y %H:%M:%S). Format string is trimmed. In order to include white characters into format string, use dots to mark beginning and end of the text. If the dot is first or last character, it's removed. Only one character from the beginning and one from the end can be removed. + +.SH "REALM OPTIONS" + +.B realm [NAME] + starts configuration of the next realm. Name of the realm can be specified using this option. + +.B hostname NAME + used when creating listening sockets (default: '') + +.B listenport PORT + listening port number - users connect to it (required at least one) + +.B manageport PORT + manage port number - afclient connects to it (required at least one) + +.B pass PASSWORD + password used for client identification (default: no password) + +.B users N + the amount of users allowed to use this server (default: 5) + +.B timeout N + the timeout value for the client's connection (default: 5) + +.B --maxidle N + the maximum idle time for the client's connection (default: disabled) + +.B clients N + the number of allowed clients to use this server (default: 1) + +.B raclients N + the number of allowed clients in remote administration mode to use this server (default: 1) + +.B usrpcli N + the number of allowed users per client (default: $users) + +.B climode N + strategy used to connect users with clients (default: 1) + Available strategies: + 1. fill first client before go to next + +.B proto TYPE + type of server (tcp|udp) - what protocol it will be operating for (default: tcp) + +.B nossl + ssl is not used to transfer data (but it's still used to establish a connection) (default: ssl is used) + +.B nozlib + zlib is not used to compress data (default: zlib is used) + +.B baseport + listenports are temporary and differ for each client + +.B audit + additional information about connections are logged + +.B dnslookups + try to obtain dns names of the computers rather than their numeric IP + +.B ipv4 + use ipv4 only + +.B ipv6 + use ipv6 only + +.B enableproxy + enable http proxy mode + +.SH "SEE ALSO" + +.BR afclient.conf (5), +.BR afclient (1), +.BR afserver (1) + +.SH AUTHOR + +Jeremian <jeremian [at] poczta.fm> + +.SH CONTRIBUTIONS + +Alex Dyatlov <alex [at] gray-world.net>, Simon <scastro [at] entreelibre.com>, Ilia Perevezentsev <iliaper [at] mail.ru>, Marco Solari <marco.solari [at] koinesistemi.it>, and Joshua Judson Rosen <rozzin [at] geekspace.com> + +.SH LICENSE + +Active Port Forwarder is distributed under the terms of the GNU General Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm>. See the file COPYING for details. diff --git a/doc/afserver_example.conf b/doc/afserver_example.conf new file mode 100644 index 0000000..8bdafa6 --- /dev/null +++ b/doc/afserver_example.conf @@ -0,0 +1,58 @@ +# This is an example configuration file for active port forwarder (server) +# Firstly, we have to declare our files with key and certificate + +cerfile server-cert.pem + +# Please note, that we can place only blank characters between words + +keyfile server.rsa + +# Logging can be enabled by log option. The argument to this option must +# be in the form: +# target,description,msgdesc + +log file,logfile,LOG_T_ALL,LOG_I_CRIT,LOG_I_ERR,LOG_I_WARNING + +# we we could also want to use sockets instead of files + +#log sock,localhost,LOG_T_ALL,LOG_I_ALL + +#dateformat %Y-%m-%d %H:%M:%S + +# And it's time to create forwarding targets (named realms here) + +#realm indicates a new set of commands to a server +#realmname is optional +realm my realm + +#options values + +#hostname <yourhostname> #this is the name of the server (used to choose interface) +listenport 50127 #portnumber on which server is listening for users +manageport 50126 #portnumber on which server is listening for afclient +#users 5 #amount of users we are allowing to connect (>0) (default: 5) +#timeout 5 #timeout value for the client's connection (>0) (default: 5) +#maxidle 300 #the maximum idle time for the client's connection (>0) (default: disabled) +#clients 1 #number of allowed clients for this realm (>0) (default: 1) +#usrpcli $users #allowed users per client for this realm (>0) (default: $users) +#climode 1 #strategy used for connecting users with clients (1) (default: 1) +#proto tcp #type of the realm (which protocol it will forward (tcp|udp) (default: tcp) +#pass mypassword #this is a password used for client identification +#raclients 1 #number of allowed clients in remote administration mode (>0) (default: 1) +#nossl #don't use ssl for data transfer +#nozlib #don't use zlib +#baseport #listenports are temporary and differ for each client +#audit #additional information about connections are logged +#dnslookups #try to obtain dns names of the computers +#ipv4 #use ipv4 only +#ipv6 #use ipv6 only +#enableproxy #enable http proxy mode +#cacerfile filename #the name of the file with CA certificates + # (if used, require clients to have valid certificates) +#cerdepth #the maximum depth of valid certificate-chains + +# and now the second realm + +realm +listenport 50125 +manageport 50124 diff --git a/doc/en/README b/doc/en/README new file mode 100644 index 0000000..e9f5b20 --- /dev/null +++ b/doc/en/README @@ -0,0 +1,685 @@ +AF - Active Port Forwarder 0.8.4 - README +Copyright (C) 2003-2007 jeremian - <jeremian [at] poczta.fm> +================================================================= + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +====================================== + + The Active Port Forwarder program is part of the Gray-World.net projects. + + Our Gray-World Team presents on the http://gray-world.net website the projects + and publications we are working on which are related to the NACS (Network + Access Control System) bypassing research field and to the computer and + network security topics. + +================================================================================ + +======= +SUMMARY +======= + +INTRO + +1. INSTALLATION + 1.1 Instructions + 1.2 Required libs + 1.3 Tested platforms +2. USAGE + 2.1 afserver + 2.2 afclient +3. REMOTE ADMINISTRATION + 3.1 Usage + 3.2 Commands + 3.3 States + 3.3.1 Users + 3.3.2 Clients + 3.4 Relay mode +4. HTTP PROXY TUNNELS +5. LOGGING +6. MODULES +7. MULTI TUNNELS +8. EXAMPLES + 8.1 tcp mode + 8.2 reverse udp mode +9. BUGS/PROBLEMS + +NOTES + +THANKS + +================================================================================ + +===== +INTRO +===== + +Active port forwarder is a software tool for secure port forwarding. +It uses ssl to increase security of communication between a server and a client. +Originally, it was developed to forward data point to point. However, the need +for bypassing firewalls in order to connect to internally located computers +influenced the further development of the project. + +AF is dedicated for people, who don't have an external ip number and want to +make some services available across the net. + +Moreover, zlib is used to compress the transferred data. + +Using one, permanent data/control channel with flow control / packet buffering +provides good performance and reasonably small latency. + +Multiple clients allow to create more sophisticated tunneling scheme. + +================================================================================ + +=============== +1. INSTALLATION +=============== + + 1.1 Instructions + ---------------- + +1. Download the compressed sources from http://www.gray-world.net/pr_af.shtml +2. Unpack them with tar zxvf +3. Type "./configure" +4. Type "make" +5. Type "make install" while logged as root +6. If something goes wrong - mail the author or post a message on + http://gray-world.net/board/ + + 1.2 Required libs + ----------------- + +1. openssl - http://www.openssl.org/ +2. zlib - http://www.gzip.org/zlib/ + + 1.3 Tested platforms + -------------------- + +1. Linux: + Gentoo, Slackware, Mandrake - built without any problems +2. Windows: + win32 - cygwin version is available on the project homepage + +================================================================================ + +======== +2. USAGE +======== + + 2.1 afserver + ------------ + + Basic options: + + -n, --hostname - it's used when creating listening sockets + (default: '') + -l, --listenport - listening [host:]port - users connect to it + (default: 50127) + -m, --manageport - manage [host:]port - afclient connects to it + (default: 50126) + -V, --version - display version number + -h, --help - prints this help + + Authorization: + + --pass - set the password used for client identification + (default: no password) + + Configuration: + + -c, --cerfile - the name of the file with certificate + (default: server-cert.pem) + -A, --cacerfile - the name of the file with CA certificates + (if used, require clients to have valid certificates) + -d, --cerdepth - the maximum depth of valid certificate-chains + -k, --keyfile - the name of the file with RSA key (default: server.rsa) + -f, --cfgfile - the name of the file with the configuration for the + active forwarder (server) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + -t, --timeout - the timeout value for the client's connection + (default: 5) + --maxidle - the maximum idle time for the client's connection + (default: disabled) + -u, --users - the amount of users allowed to use this server + (default: 5) + -C, --clients - the number of allowed clients to use this server + (default: 1) + -r, --realm - set the realm name (default: none) + -R, --raclients - the number of allowed clients in remote administration + mode to use this server (default: 1) + -U, --usrpcli - the number of allowed users per client (default: $users) + -M, --climode - strategy used to connect users with clients (default: 1) + Available strategies: + 1. fill first client before go to next + + -p, --proto - type of server (tcp|udp) - what protocol it will be + operating for (default: tcp) + -b, --baseport - listenports are temporary and differ for each client + -a, --audit - additional information about connections are logged + --nossl - ssl is not used to transfer data (but it's still used + to establish a connection) (default: ssl is used) + --nozlib - zlib is not used to compress data (default: zlib is + used) + --dnslookups - try to obtain dns names of the computers rather than + their numeric IP + + Logging: + + -o, --log - log choosen information to file/socket + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + HTTP PROXY: + + -P, --enableproxy - enable http proxy mode + + + 2.2 afclient + ------------ + + Basic options: + + -n, --servername - where the second part of the active + port forwarder is running (required) + -m, --manageport - manage port number - server must be + listening on it (default: 50126) + -d, --hostname - the name of this host/remote host - the final + destination of the packets (default: the name + returned by hostname function) + -p, --portnum - the port we are forwarding connection to (required) + --localname - local machine name for connection with afserver + (used to bind socket to different interfaces) + --localport - local port name for connection with afserver + (used to bind socket to different addressees) + --localdesname - local machine name for connections with destination + application (used to bind socket to different interfaces) + -V, --version - display version number + -h, --help - prints this help + + Authorization: + + -i, --id - sends the id string to afserver + --pass - set the password used for client identification + (default: no password) + --ignorepkeys - ignore invalid server's public keys + + Configuration: + + -k, --keyfile - the name of the file with RSA key (default: client.rsa) + -c, --cerfile - the name of the file with certificate + (default: no certificate used) + -f, --cfgfile - the name of the file with the configuration for the + active forwarder (client) + -s, --storefile - the name of the file with stored public keys + (default: known_hosts) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + -K, --keep-alive N - send keepalive packets every N seconds + (default: not send keepalive packets) + + Auto-reconnection: + + --ar-start - enable auto-reconnection when afserver is not + reachable on start (default: disabled) + --ar-quit - enable auto-reconnection after normal afserver quit + (default: disabled) + --noar - disable auto-reconnection after premature afserver + quit (default: enabled) + -A, --ar-tries N - try N times to reconnect (default: unlimited) + -T, --ar-delay N - wait N seconds between reconnect tries (default: 5) + + Modes: + + -u, --udpmode - udp mode - client will use udp protocol to + communicate with the hostname:portnum + -U, --reverseudp - reverse udp forwarding. Udp packets will be forwarded + from hostname:portnum to the server name:manageport + -r, --remoteadmin - remote administration mode. (using '-p #port' will + force afclient to use port rather than stdin-stdout) + + Logging: + + -o, --log - log choosen information to file/socket + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + Modules: + + -l, --load - load a module for user's packets filtering + -L, --Load - load a module for service's packets filtering + + HTTP/HTTPS PROXY: + + -S, --use-https - use https proxy instead of http proxy + -P, --proxyname - the name of the machine with proxy server + -X, --proxyport - the port used by proxy server (default: 8080) + -C, --pa-cred U:P - the user (U) and password (P) used in proxy + authorization + -B, --pa-t-basic - the Basic type of proxy authorization (default) + + +================================================================================ + +======================== +3. REMOTE ADMINISTRATION +======================== + + 3.1 Usage + --------- + +Afclient can be started in remote administration mode by '-r, --remoteadmin' +option. Required option: '-n, --servername NAME'. + +After successful authorization stdin/stdout is used to communicate with user. +All the commands parsing is done by afserver. + + 3.2 Commands + ------------ + +Currently available commands are: + + help + display help + + lcmd + lists available commands + + info + prints info about server + + rshow + display realms + + cshow X + display clients in X realm + + ushow X + display users in X realm + + quit + quit connection + + timeout N X + set timeout value in X realm + + audit {0|1} X + set audit mode in X realm + + dnslookups {0|1} X + set dnslookups mode in X realm + + dateformat S + set dateformat + + kuser S + kick user named S + + kclient N + kick client with number N + + + 3.3 States + ---------- + + 3.3.1 Users + ----------- + + Connected users can be in several states: + + running + user is properly connected and can send/receive data + + opening + user is connected to afserver, but afclient hasn't confirmed connection + with the destination. There is no traffic allowed in this situation. + + opening (closed) + user was in 'opening' state, but 'kuser' command has been used and it's + now queued for closing as soon as afclient will be ready to confirm + this + + stopped + user wasn't responsible, so all the packets addressed to it are queued. + Afclient is informed to not receive any packets for this user. + + closing + connection with user has been lost. Afclient has to confirm user + deletion + + unknown + probably afserver internal state has been corrupted. + + + 3.3.2 Clients + ------------- + + Connected clients can be in several states: + + running + client is properly connected and can serve user's requests + + ssl handshake + connection with client has been initialized and now ssl routines are + negotiating all the details needed to establish secure tunnel. This + stage with 'authorization' must not exceed the time set by 'timeout' + option. + + authorization + ssl tunnel is ready and afclient has to authorize itself to the + afserver. This stage with 'ssl handshake' must not exceed the time set + by 'timeout' option. + + unknown + probably afserver internal state has been corrupted. + + + 3.4 Relay mode + -------------- + +Afclient with '-p, --portnum PORT' option listens for connection from user at +NAME:PORT. NAME is set by '-d, --hostname' option or hostname() function, when +the option is missing. + +When user quits (close the connection or send 'quit' command), afclient exits. + +================================================================================ + +===================== +4. HTTP PROXY TUNNELS +===================== + +Afclient can communicate with afserver via HTTP proxy. In order to use this +feature, afserver must be started with '-P, --enableproxy' option. Afclient must +specify the proxy host ('-P, --proxyname' option) and port ('-X, --proxyport' +option). + +Afclient with HTTP proxy mode enabled can still accept connections from +afclients, which don't use HTTP proxy mode. + +================================================================================ + +========== +5. LOGGING +========== + +Logging can be enabled by '-o, --log' option. The argument to this option must +be in the form: + target,description,msgdesc + +Where + target is file or sock + description is filename or host,port + msgdesc is the subset of: + LOG_T_ALL, + LOG_T_USER, + LOG_T_CLIENT, + LOG_T_INIT, + LOG_T_MANAGE, + LOG_T_MAIN, + LOG_I_ALL, + LOG_I_CRIT, + LOG_I_DEBUG, + LOG_I_DDEBUG, + LOG_I_INFO, + LOG_I_NOTICE, + LOG_I_WARNING, + LOG_I_ERR + + written without spaces. + + + Example: + + file,filename,LOG_T_MANAGE,LOG_I_ALL + +================================================================================ + +========== +6. MODULES +========== + +Afclient can use external modules for user's packets filtering ('-l, --load') +and service's packets filtering ('-L, --Load'). Module file has to declare three +functions: + +char* info(void); + + info() return values: + - info about module + + Example: + + char* + info(void) + { + return "Module tester v0.1"; + } + +int allow(char* host, char* port); + + allow() return values: + 0 - allow to connect + !0 - drop the connection + + Example: + + int + allow(char* host, char* port) + { + return 0; /* allow to connect */ + } + +int filter(char* host, unsigned char* message, int* length); + + filter() return values: + 0 - allow to transfer + 1 - drop the packet + 2 - drop the connection + 3 - release the module + 4 - drop the packet and release the module + 5 - drop the connection and release the module + + Example: + + int + filter(char* host, unsigned char* message, int* length) + { + int i; + for (i = 1; i < *length; ++i) { + if (message[i-1] == 'M') { + if (message[i] == '1') { + return 1; /* ignored */ + } + if (message[i] == '2') { + return 2; /* dropped */ + } + if (message[i] == '3') { + return 3; /* release */ + } + if (message[i] == '4') { + return 4; /* ignored + release */ + } + if (message[i] == '5') { + return 5; /* dropped + release */ + } + } + } + return 0; /* allow to transfer */ + } + +Modules have to be compiled with '-fPIC -shared' options. + +================================================================================ + +================ +7. MULTI TUNNELS +================ + +Since version 0.8 it's possible to transfer multiple tunnels in the one +afclient <-> afserver connection. + +On the afserver we have to specify multiple listen ports with the same manage +port. + +When we set several '-p' options on the afclient, the new user connections will +be distributed according to the sequence of the options, i.e. new user +connecting to the second UsrCli pair (with the same manage ports) will be +transferred to the destination pointed by the second '-p' option. + +================================================================================ + +=========== +8. EXAMPLES +=========== + + 8.1 tcp mode + ------------ + + local network |FireWall| Internet + || + || User 1 + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | \(tcp) + /(tcp) || (tcp)| User 2 + / || \ + Http server || User 3 + || + + +The use of it is extremely simple. Let's suppose we want to create a http server +on our computer and we are behind a masquerade or a firewall: + +1) We have to find some machine on the net with an external ip and a shell + account. + +2) Use "make" to compile everything on that machine. (you can freely remove the + afclient and client.rsa files) + +3) You can edit the config file or just type from the console (to use the config + type -f <cfgfile>) : + $ ./afserver + This will work, if you want to use default values: + - hostname will be taken from hostname function (it would be ideally, if + there is appropriate registration in /etc/hosts) + - server will be listening for users on port 50127 + - server will be listening for client on port 50126 + - server will be for maximum 5 users + - server will forward tcp packets + - there will be no logging and no verbose messages + - there will be no password identification + - ip protocol family will be unspecified + +4) We use "make" on our machine (we can delete everything apart from afclient + and client.rsa) + +5) We are typing from the console: + $ ./afclient -n <name of the server> -p 80 + Where <name of the server> is a string like : 'bastion.univ.gda.pl' or + '153.19.7.200' + +6) We can now enter with a web-browser to: <name of the server>:50127 and we + will enter to our computer in the fact. + + 8.2 reverse udp mode + -------------------- + + local network |FireWall| Internet + || (udp) + || User 1-------AF Client + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | + /(udp) || (tcp)| + / || / + Game server || AF Client-------User 2 + || (udp) + + +Let's see how to use af to forward udp packets. Suppose we want to create a game +server on our computer (udp port 27960 on our machine): + +1) - 4) is the same like in example 1. (but we add option: -p udp) + +5) We are typing from the console: + $ ./afclient -u -n <name of the server> -p 27960 + Where <name of the server> is a name (or ip) of a host where our server is + running. + +6) Connecting to our game is more complicated. The user must use afclient to do + this. He has to specify the server he is connecting to and the port, which + his program will be listening on: + $ ./afclient -U -d <hostname> -p <portnum> -n <name of the server> \ + -m <server port> + Where <hostname> is the name of the user machine (who wants to connect to our + game). <portnum> is the port he will be connecting to. <name of the server> + is the name of the host where our server is running. <server port> is the + port on which the server is listening for users. In order to connect to our + game, the user has to connect to <hostname>:<portnum>. + +================================================================================ + +================ +9. BUGS/PROBLEMS +================ + +There are no known/open bugs at the moment. + +================================================================================ + +===== +NOTES +===== + +Active port forwarder is still under development, so please sent any comments, +bugs notices and suggestions about it to <jeremian [at] poczta.fm> + +If you have some problems or want to share your opinions with others, feel free +to post a message at http://gray-world.net/board/ + +================================================================================ + +====== +THANKS +====== + + Big thanks to the GW Team: + + to Alex <alex [at] gray-world.net> + and Simon <scastro [at] entreelibre.com> for testing AF and a lot of advices. + + Thanks to Ilia Perevezentsev <iliaper [at] mail.ru> who read and corrected the +README file. + + Thanks to Marco Solari <marco.solari [at] koinesistemi.it> for a lot of +requests, suggestions and ideas. + + Thanks to Joshua Judson Rosen <rozzin [at] geekspace.com> for the patch adding +certificate-based authentication to the APF. + + And thanks for using this software! + +LICENSE +------- + + Active Port Forwarder is distributed under the terms of the GNU General + Public License v2.0 and is copyright (C) 2003-2007 jeremian <jeremian + [at] poczta.fm>. See the file COPYING for details. + + In addition, as a special exception, the copyright holders give permission to + link the code of portions of this program with the OpenSSL library under + certain conditions as described in each individual source file, and distribute + linked combinations including the two. diff --git a/doc/fr/fr_README b/doc/fr/fr_README new file mode 100644 index 0000000..1366291 --- /dev/null +++ b/doc/fr/fr_README @@ -0,0 +1,488 @@ +AF - Active Port Forwarder 0.6 - README +Copyright (C) 2003,2004,2005 jeremian - <jeremian [at] poczta.fm> +================================================================= + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +====================================== + + Le programme Active Port Forwarder est partie intégrante des projets + Gray-World.net. + + Notre équipe présente sur le site http://gray-world.net les projets et + publications sur lesquels nous travaillons. Ces projets et publications sont + relatifs au contournement des systèmes de contrôle d'accès réseau (NACS + bypassing) ainsi qu'à la sécurité des systèmes et réseaux. + +================================================================================ + +======== +SOMMAIRE +======== + +INTRO + +1. INSTALLATION + 1.1 Instructions + 1.2 Librairies requises + 1.3 Plate-formes testées +2. USAGE + 2.1 afserver + 2.2 afclient +3. ADMINISTRATION DISTANTE +4. MODULES +5. EXEMPLES + 5.1 tcp mode + 5.2 reverse udp mode +6. BUGS/PROBLEMES + +NOTES + +THANKS + +================================================================================ + +===== +INTRO +===== + +Active port forwarder est un programme permettant de réaliser du forwarding de +port sécurisé. Il utilise le protocole SSL pour augmenter le niveau de sécurité +des communications entre serveur et client. Son développement initial comme +outil de communication point à point a été influencé de façon à permettre le +contournement de firewalls et les communications à destination d'équipements +localisés sur le réseau interne. + +Af est destiné aux personnes sans adresse IP publique externe qui désirent +offrir des services accessibles depuis le net. + +La librairie Zlib est de plus employée pour compresser les données transférées. + +L'utilisation d'un canal contrôle/données permanent avec une gestion de flux et +une mise en cache des paquets fournit de bonnes performances et un temps de +latence raisonnablement court. + +L'emploi de clients multiples permet la création de schémas de tunneling plus +sophistiqués. + +================================================================================ + +=============== +1. INSTALLATION +=============== + + 1.1 Instructions + ---------------- + +1. Télécharger les sources compressées depuis www.gray-world.net/pr_af.shtml +2. Décompresser avec tar zxvf +3. Entrer "./configure" +4. Entrer "make" +5. Entrer "make install" sous l'identité root +6. Si un problème survient - envoyez un mail à l'auteur ou postez un message + sur http://gray-world.net/board/ + + 1.2 Librairies requises + ----------------------- + +1. openssl - http://www.openssl.org/ +2. zlib - http://www.gzip.org/zlib/ + + 1.3 Plate-formes testées + ------------------------ + +1. Linux: + Gentoo, Slackware, Mandrake - Compilation sans problème +2. Windows: + win32 - Version cygwin disponible sur la page du projet + +================================================================================ + +======== +2. USAGE +======== + + 2.1 afserver + ------------ + + Basic options: + + -n, --hostname - it's used when creating listening sockets + (default: '') + -l, --listenport - listening port number - users connect + to it (default: 50127) + -m, --manageport - manage port number - second part of the active + port forwarder connects to it (default: 50126) + -h, --help - prints this help + + Authorization: + + --pass - set the password used for client identification + (default: no password) + + Configuration: + + -c, --cerfile - the name of the file with certificate + (default: cacert.pem) + -k, --keyfile - the name of the file with RSA key (default: server.rsa) + -f, --cfgfile - the name of the file with the configuration for the + active forwarder (server) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + + -t, --timeout - the timeout value for the client's connection + (default: 5) + -u, --users - the amount of users allowed to use this server + (default: 5) + -C, --clients - the number of allowed clients to use this server + (default: 1) + -r, --realm - set the realm name (default: none) + -R, --raclients - the number of allowed clients in remote administration + mode to use this server (default: 1) + -U, --usrpcli - the number of allowed users per client (default: $users) + -M, --climode - strategy used for connecting users with clients + (default: 1) + Available strategies: + 1. fill first client before go to next + + -p, --proto - type of server (tcp|udp) - for which protocol it will + be operating (default: tcp) + -b, --baseport - listenports are temporary and differ for each client + --nossl - ssl is not used for transferring data (but it's still + used to establish a connection) (default: ssl is used) + --nozlib - zlib is not used for compressing data (default: + zlib is used) + --dnslookups - try to obtain dns names of the computers rather than + their numeric IP + + Logging: + + -O, --heavylog - logging everything to a logfile + -o, --lightlog - logging some data to a logfile + -S, --heavysocklog - logging everything to a localport + -s, --lightsocklog - logging some data to a localport + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + 2.2 afclient + ------------ + + Basic options: + + -n, --servername - where the second part of the active + port forwarder is running (required) + -m, --manageport - manage port number - server must be + listening on it (default: 50126) + -d, --hostname - the name of this host/remote host - the final + destination of the packets (default: the name + returned by hostname function) + -p, --portnum - the port we are forwarding connection to (required) + -h, --help - prints this help + + Authorization: + + -i, --id - send the id string to afserver + --pass - set the password used for client identification + (default: no password) + + Configuration: + + -k, --keyfile - the name of the file with RSA key (default: client.rsa) + -D, --dateformat - format of the date printed in logs (see 'man strftime' + for details) (default: %d.%m.%Y %H:%M:%S) + + Modes: + + -u, --udpmode - udp mode - client will use udp protocol to + communicate with the hostname + -U, --reverseudp - reverse udp forwarding. Udp packets will be forwarded + from hostname:portnum (-p) to the server name:portnum + (-m) + -r, --remoteadmin - remote administration mode. (using '-p #port' will + force afclient to use port rather then stdin-stdout) + + Logging: + + -O, --heavylog - logging everything to a logfile + -o, --lightlog - logging some data to a logfile + -S, --heavysocklog - logging everything to a localport + -s, --lightsocklog - logging some data to a localport + -v, --verbose - to be verbose - program won't enter the daemon mode + (use several times for greater effect) + + IP family: + + -4, --ipv4 - use ipv4 only + -6, --ipv6 - use ipv6 only + + Modules: + + -l, --load - load a module for user's packets filtering + -L, --Load - load a module for service's packets filtering + +================================================================================ + +========================== +3. ADMINISTRATION DISTANTE +========================== + +Afclient peut être démarré en mode d'administration distante avec l'option '-r, +--remoteadmin'. L'option requise est: '-n, --servername NAME'. + +Après autorisation, les flux stdin/stdout sont utilisés pour communiquer avec +l'utilisateur. La prise en compte des commandes est effectuée par afserver. + +Les commandes disponibles sont: + + help + display help + + lcmd + lists available commands + + info + prints info about server + + rshow + display realms + + cshow X + display clients in X realm + + ushow X + display users in X realm + + quit + quit connection + +Afclient se positionne en écoute sur NAME:PORT avec '-p, --portnum PORT'. NAME +est positionné avec l'option '-d, --hostname' ou par la fonction hostname() si +l'argument n'est pas fourni. + +Quand l'utilisateur quitte (termine la connexion ou envoie la commande 'quit'), +afclient se termine. + +================================================================================ + +========== +4. MODULES +========== + +Afclient peut utiliser des modules externes pour le filtrage des paquets ('-l, + --load') utilisateurs et pour le filtrage des paquets service ('-L, --Load'). +Le fichier contenant les modules doit déclarer trois fonctions : + +char* info(void); + + info() return values: + - info about module + + Example: + + char* + info(void) + { + return "Module tester v0.1"; + } + +int allow(char* host, char* port); + + allow() return values: + 0 - allow to connect + !0 - drop the connection + + Example: + + int + allow(char* host, char* port) + { + return 0; /* allow to connect */ + } + +int filter(char* host, unsigned char* message, int* length); + + filter() return values: + 0 - allow to transfer + 1 - drop the packet + 2 - drop the connection + 3 - release the module + 4 - drop the packet and release the module + 5 - drop the connection and release the module + + Example: + + int + filter(char* host, unsigned char* message, int* length) + { + int i; + for (i = 1; i < *length; ++i) { + if (message[i-1] == 'M') { + if (message[i] == '1') { + return 1; /* ignored */ + } + if (message[i] == '2') { + return 2; /* dropped */ + } + if (message[i] == '3') { + return 3; /* release */ + } + if (message[i] == '4') { + return 4; /* ignored + release */ + } + if (message[i] == '5') { + return 5; /* dropped + release */ + } + } + } + return 0; /* allow to transfer */ + } + +Les modules doivent être compilés avec les options '-fPIC -shared'. + +================================================================================ + +=========== +5. EXEMPLES +=========== + + 5.1 tcp mode + ------------ + + local network |FireWall| Internet + || + || User 1 + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | \(tcp) + /(tcp) || (tcp)| User 2 + / || \ + Http server || User 3 + || + + +L'utilisation de Af est extrèmement simple. Supposons que nous voulons mettre en +place un serveur http sur notre station et que nous sommes masqueradés ou placé +derrière un firewall: + +1) Nous devons tout d'abord trouver une station sur internet avec une IP +publique et un shell. + +2) Utilisez ensuite make pour compiler Af sur cette machine. (Vous pouvez par la +suite supprimer les fichiers afclient et client.rsa) + +3) Editez le fichier de configuration ou entrez sur la console: (pour utiliser +la configuration, entrez type -f <cfgfile>) + $ ./afserver + Si vous voulez utiliser les valeurs par défaut: + - Le nom d'hôte sera pris en compte par la fonction hostname (Il serait idéal + qu'il soit référencé dans le fichier /etc/hosts) + - Le serveur sera en écoute pour les utilisateurs sur le port 50127 + - Le serveur sera en écoute pour le client sur le port 50126 + - Le serveur sera limité à 5 utilisateurs + - Le serveur retransmettra les paquets tcp + - Aucun log ou message verbeux ne sera activé + +4) Nous utilisons make sur notre propre station (Nous pouvons ensuite supprimer +tous les fichiers sauf afclient et client.rsa) + +5) Nous entrons sur la console: + $ ./afclient -n <name of the server> -p 80 + Où <name of the server> est une chaîne du type : 'bastion.univ.gda.pl' ou + '153.19.7.200' + +6) Nous pouvons ensuite utiliser notre navigateur web avec : + <name of the server>:50127 et nous atteindrons notre propre station. + + 5.2 reverse udp mode + -------------------- + + local network |FireWall| Internet + || (udp) + || User 1-------AF Client + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | + /(udp) || (tcp)| + / || / + Game server || AF Client-------User 2 + || (udp) + + +Regardons comment nous pouvons utiliser af pour forwarder des paquets udp. +Supposez que nous voulons mettre en place un serveur de jeu sur notre station +(port udp 27960 sur notre station): + +1) - 4) sont les mêmes que pour l'exemple 1. + +5) Nous entrons sur la console: + $ ./afclient -u -n <name of the server> -p 27960 + Où <name of the server> est un nom (ou une ip) d'un hôte sur lequel notre + serveur tourne. + +6) Nous connecter à notre jeu est un peu plus compliqué. L'utilisateur doit se + servir de afclient pour cela. + Il doit spécifier le serveur auquel il veut se connecter et le port sur + lequel son programme sera en écoute: + $ ./afclient -U -d <hostname> -p <portnum> -n <name of the server> -m\ + <server port> + Où <hostname> est le nom de la station utilisateur (qui veut se connecter à + notre jeu). <portnum> est le port auquel il se connectera. <name of the + server> est le nom de l'hôte sur lequel notre serveur tourne. <server port> + est le port sur lequel notre serveur est en écoute pour les utilisateurs. + Pour se connecter à notre jeu, l'utilisateur doit se connecter à <hostname>: + <portnum>. + +================================================================================ + +================ +6. BUGS/PROBLEMS +================ + +Aucun bug n'est connu ou en cours de résolution à ce moment. + +================================================================================ + +===== +NOTES +===== + +Active port forwarder est toujours en phase en développement, alors envoyez moi +vos commentaires, les bugs que vous rencontrez et vos suggestions à +<jeremian [at] poczta.fm> + +Si vous rencontrez des problèmes ou voulez partager vos opinions , vous pouvez +poster un message sur le forum http://gray-world.net/board/. + +================================================================================ + +====== +THANKS +====== + + Remerciements à l'équipe GW: + + à Alex <alex [at] gray-world.net> + et Simon <scastro [at] entreelibre.com> pour les tests de AF et de nombreux +conseils. + + Merci à Ilia Perevezentsev <iliaper [at] mail.ru> qui a lu et corrigé le +fichier README. + + Merci à Marco Solari <marco.solari [at] koinesistemi.it> pour de nombreuses +requêtes, suggestions et idées. + + Et merci à vous pour l'utilisation de cet outil. + +LICENCE +------- + + Active Port Forwarder est distribué sous les termes de la licence GNU - + General Public Licence version 2.0 et est copyright (c)2003,2004,2005 jeremian + <jeremian [at] poczta.fm>. + Consultez le fichier COPYING pour plus de details. diff --git a/doc/ru/ru_README b/doc/ru/ru_README new file mode 100644 index 0000000..4e825f7 --- /dev/null +++ b/doc/ru/ru_README @@ -0,0 +1,294 @@ +AF - Active Port Forwarder v0.5.4 - README +Copyright (C) 2003,2004 jeremian - <jeremian [at] poczta.fm> +=================== + +================================================================================ + +GRAY-WORLD.NET / Active Port Forwarder +========================== + + Ïðîãðàììà Active Port Forwarder ÿâëÿåòñÿ ÷àñòüþ ïðîåêòà Gray-World.net. + + Íàøà êîìàíäà Gray-World ïðåäñòàâëÿåò íà ñàéòå http://gray-world.net ïðîåêòû è + ïóáëèêàöèè, íàä êîòîðûìè ìû ðàáîòàåì, îòíîñÿùèåñÿ ê îáëàñòè èññëåäîâàíèÿ + NACS (Ñèñòåì Êîíòðîëÿ Ñåòåâîãî Äîñòóïà), à òàêæå ê òåìå êîìïüþòåðíîé è + ñåòåâîé áåçîïàñíîñòè. + +================================================================================ + +========== +ÑÎÄÅÐÆÀÍÈÅ +========== + +ÎÏÈÑÀÍÈÅ + +1. ÓÑÒÀÍÎÂÊÀ + 1.1 Èíñòðóêöèè + 1.2 Íåîáõîäèìûå áèáëèîòåêè + 1.3 Òåñòîâûå ïëàòôîðìû +2. ÈÑÏÎËÜÇÎÂÀÍÈÅ + 2.1 afserver + 2.2 afclient +3. ÏÐÈÌÅÐÛ + 3.1 tcp-ðåæèì + 3.2 îáðàòíûé udp-ðåæèì +4. ÈÇÂÅÑÒÍÛÅ ÎØÈÁÊÈ/ÏÐÎÁËÅÌÛ + +ÇÀÌÅ×ÀÍÈß + +ÁËÀÃÎÄÀÐÍÎÑÒÈ + +================================================================================ + +======== +ÎÏÈÑÀÍÈÅ +======== + +Active port forwarder ýòî ïðîãðàììíûé èíñòðóìåíò äëÿ áåçîïàñíîãî òóíåëèðîâàíèÿ +äàííûõ. Îí èñïîëüçóåò SSL äëÿ çàùèòû ñîåäèíåíèÿ ìåæäó êëèåíòîì è ñåðâåðîì. +Èçíà÷àëüíî, ïðîãðàììà áûëà ðàçðàáîòàíà äëÿ ïðîñòîé ïåðåñûëêè äàííûõ îò òî÷êè ê +òî÷êå. Îäíàêî íåîáõîäèìîñòü îáõîäà áðàíäìàóýðà ñ öåëüþ ñäåëàòü êîìïüþòåðû +ëîêàëüíîé ñåòè äîñòóïíûìè èçâíå, ïîâëèÿëà íà äàëüíåéøåå ðàçâèòèå ïðîåêòà. + +AF ïðåäíàçíà÷åí äëÿ ëþäåé, íå èìåþùèõ âíåøíåãî IP àäðåñà è êîòîðûå õîòÿò ñäåëàòü +íåêîòîðûå ëîêàëüíûå ñåðâèñû äîñòóïíûìè â ñåòè. + + ïðîãðàììå èñïîëüçîâàíà áèáëèîòåêà zlib äëÿ ñæàòèÿ ïåðåäàâàåìûõ äàííûõ. + +Èñïîëüçîâàíèå åäèíîãî êàíàëà äëÿ ïåðåäà÷è äàííûõ è êîìàíä óïðàâëåíèÿ â ñî÷åòàíèè +ñ áóôåðèçàöèåé ïåðåñûëàåìûõ ïàêåòîâ îáåñïå÷èâàåò õîðîøóþ ïðîèçâîäèòåëüíîñòü è +ìàëîå âðåìÿ îòêëèêà ñèñòåìû. + +Äëÿ çàïóñêà afserver íå òðåáóåòñÿ ïðèâèëåãèé root, òàêæå îí íå èñïîëüçóåò +thread-û èëè äðóãèå ïðîöåññû. + +================================================================================ + +============ +1. ÓÑÒÀÍÎÂÊÀ +============ + + 1.1 Èíñòðóêöèè + -------------- + +1. Çàãðóçèòå óïàêîâàííûé èñõîäíûé êîä ñ http://www.gray-world.net/pr_af.shtml +2. Ðàñïàêóéòå - tar zxvf +3. Âûïîëíèòå êîìàíäó "make". +4. Åñëè ÷òî-òî ïîøëî íå òàê - íàïèøèòå ïèñüìî àâòîðó èëè îñòàâüòå ñîîáùåíèå íà + http://gray-world.net/board/ + + 1.2 Íåîáõîäèìûå áèáëèîòåêè + -------------------------- + +1. openssl - http://www.openssl.org/ +2. zlib - http://www.gzip.org/zlib/ + + 1.3 Òåñòîâûå ïëàòôîðìû + ---------------------- + +1. Linux: + Gentoo, Slackware, Mandrake - áûëî ñîáðàíî áåç êàêèõ-ëèáî ïðîáëåì +2. Freebsd: + 4.4, 4.9 - Íåîáõîäèì patch ñ äîìàøíåé ñòðàíèöû ïðîåêòà +3. Windows: + win32 - Âåðñèÿ ñ cygwin äîñòóïíà íà äîìàøíåé ñòðàíèöå ïðîåêòà + +================================================================================ + +================ +2. ÈÑÏÎËÜÇÎÂÀÍÈÅ +================ + + 2.1 afserver + ------------ + + Ïàðàìåòðû: + -h, --help - ïå÷àòàåò ýòó ñïðàâêó + -n, --hostname - èñïîëüçóåòñÿ ïðè ñîçäàíèè "ñëóøàþùèõ" ñîêåòîâ + (ïî óìîë÷àíèþ: èìÿ âîçâðàùàåìîå ôóíêöèåé hostname) + -l, --listenport - ïîðò ñåðâåðà - ïîëüçîâàòåëè ñîåäèíÿþòñÿ + ñ íèì (ïî óìîë÷àíèþ: 50127) + -m, --manageport - ïîðò äëÿ óïðàâëåíèÿ - äðóãàÿ ÷àñòü active + port forwarder ñîåäèíÿåòñÿ ñ íèì (ïî óìîë÷àíèþ: 50126) + -u, --users - êîëè÷åñòâî ïîëüçîâàòåëåé, èñïîëüçóþùèõ ñåðâåð + (ïî óìîë÷àíèþ: 5) + -c, --cerfile - èìÿ ôàéëà ñ ñåðòèôèêàòîì + (ïî óìîë÷àíèþ: cacert.pem) + -k, --keyfile - èìÿ ôàéëà ñ êëþ÷îì RSA (ïî óìîë÷àíèþ: server.rsa) + -f, --cfgfile - èìÿ ôàéëà ñ êîíôèãóðàöèåé äëÿ active forwarder (ñåðâåð) + -p, --proto - òèï ñåðâåðà (tcp|udp) - ñ êàêèì ïðîòîêîëîì îí áóäåò + ðàáîòàòü (ïî óìîë÷àíèþ: tcp) + -O, --heavylog - ïèñàòü âñå ñîîáùåíèÿ â logfile + -o, --lightlog - ïèñàòü íåêîòîðûå ñîîáùåíèÿ â logfile + -v, --verbose - âûâîä ñîîáùåíèé â êîíñîëü - ïðîãðàìà íå áóäåò ðàáîòàòü + êàê daemon. + --nossl - ïðîòîêîë ssl íå áóäåò èñïîëüçîâàí äëÿ ïåðåäà÷è äàííûõ (íî + áóäåò èñïîëüçîâàí äëÿ óñòàíîâêè ñîåäèíåíèé) (ïî óìîë÷àíèþ: + ssl èñïîëüçóåòñÿ âñåãäà) + --nozlib - zlib íå áóäåò èñïîëüçîâàòüñÿ äëÿ ñæàòèÿ äàííûõ + (ïî óìîë÷àíèþ: zlib èñïîëüçóåòñÿ) + --pass - çàäàòü ïàðîëü äëÿ èäåíòèôèêàöèè êëèåíòà + (ïî óìîë÷àíèþ: íåò ïàðîëÿ) + -4, --ipv4 - èñïîëüçîâàòü òîëüêî ipv4 + -6, --ipv6 - èñïîëüçîâàòü òîëüêî ipv6 + + 2.2 afclient + ------------ + + Options: + -h, --help - ïå÷àòàåò ýòó ñïðàâêó + -n, --servername - ãäå ðàáîòàåò âòîðàÿ ÷àñòü active port + forwarder (íåîáõîäèìî) + -m, --manageport - ïîðò äëÿ óïðàâëåíèÿ - ñåðâåð ñîåäèíÿåòñÿ ñ íèì + (ïî óìîë÷àíèþ: 50126) + -d, --hostname - èìÿ ëîêàëüíîãî/óäàëåííîãî ñåðâåðà - äàííûå áóäóò òóíåëèðîâàíû + íà íåãî (ïî óìîë÷àíèþ: èìÿ âîçâðàùàåìîå ôóíöèåé hostname) + -p, --portnum - ïîðò íà êîòîðûé áóäóò òóíåëèðîâàíû äàííûå (íåîáõîäèìî) + -k, --keyfile - èìÿ ôàéëà ñ êëþ÷îì RSA (ïî óìîë÷àíèþ: client.rsa) + -u, --udpmode - udp-ðåæèì - êëèåíò áóäåò èñïîëüçîâàòü udp ïðîòîêîë äëÿ + êîììóíèêàöèè ñ hostname + -U, --reverseudp - îáðàòíûé udp-ðåæèì. Udp ïàêåòû áóäóò ïåðåíàïðàâëÿòüñÿ + ñ hostname:portnum (-p) íà ñåðâåð name:portnum (-m) + -O, --heavylog - ïèñàòü âñå ñîîáùåíèÿ â logfile + -o, --lightlog - ïèñàòü íåêîòîðûå ñîîáùåíèÿ â logfile + -v, --verbose - âûâîä ñîîáùåíèé â êîíñîëü - ïðîãðàìà íå áóäåò ðàáîòàòü + êàê daemon. + --pass - çàäàòü ïàðîëü äëÿ èäåíòèôèêàöèè êëèåíòà + (ïî óìîë÷àíèþ: íåò ïàðîëÿ) + -4, --ipv4 - èñïîëüçîâàòü òîëüêî ipv4 + -6, --ipv6 - èñïîëüçîâàòü òîëüêî ipv6 + -l, --load - çàãðóçèòü ìîäóëü äëÿ ôèëüòðàöèè ïàêåòîâ + +================================================================================ + +========== +3. ÏÐÈÌÅÐÛ +========== + + 3.1 tcp-ðåæèì + ------------- + + local network |FireWall| Internet + || + || User 1 + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | \(tcp) + /(tcp) || (tcp)| User 2 + / || \ + Http server || User 3 + || + + +Èñïîëüçîâàíèå ýòîãî ðåæèìà ÷åðåçâû÷àíî ïðîñòîå. Äàâàéòå ïðåäïîëîæèì, ÷òî ìû +õîòèì ñîçäàò http ñåðâåð íà íàøåì êîìïüþòåðå, íàõîäÿùåìñÿ â ëîêàëüíîé ñåòè çà +áðàíäìàóýðîì: + +1) Ìû äîëæíû íàéòè ìàøèíó ñ âíåøíèì IP àäðåñîì è äîñòóïîì ê shell. + +2) Èñïîëüçîâàòü "make" ÷òîáû ñêîìïèëèðîâàòü AF íà íåé. (âû ìîæåòå ñïîêîéíî + óäàëÿòü ôàéëû afclient è client.rsa) + +3) Âû ìîæåòå îòðåäàêòèðîâàòü êîíôèãóðàöèîííûé ôàéë èëè ïåðåäàòü ïðîãðàììå âñå + ïàðàìåòðû èç êîíñîëè (äëÿ èñïîëüçîâàíèÿ ôàéëà íàáåðèòå -f <cfgfile>) : + $ ./afserver + Ýòî áóäåò ðàáîòàòü, åñëè âû õîòèòå èñïîëüçîâàòü íàñòðîéêè ïî óìîë÷àíèþ: + - hostname áóäåò âçÿò èç ôóíêöèè hostname (ýòî ðàáîòàåò çàìå÷àòåëüíî, åñëè + åñòü ñîîòâåòñòâóþùàÿ çàïèñü â /etc/hosts) + - ñåðâåð áóäåò æäàòü ïîëüçîâàòåëåé íà ïîðòó 50127 + - ñåðâåð áóäåò æäàòü êëèåíòà íà ïîðòó 50126 + - ñåðâåð áóäåò îáñëóæèâàòü ìàêèìóì 5 ïîëüçîâàòåëåé + - ñåðâåð áóäåò ïåðåíàïðàâëÿòü tcp ñîåäèíåíèÿ + - îòëàäî÷íûõ ñîîáùåíèé íå áóäåò + - èäåíòèôèêàöèé ïî ïàðîëþ íå áóäåò + - âåðñèÿ ïðîòîêîëà ip íå áóäåò çàäàíà + +4) Ìû èñïîëüçóåì "make" íà íàøåé ìàøèíå (ìîæíî óäàëèòü âñå êðîìå afclient è + client.rsa) + +5) Íàáèðàåì â êîíñîëè: + $ ./afclient -n <èìÿ ñåðâåðà> -p 80 + Ãäå <èìÿ ñåðâåðà> ñòðîêà òèïà: 'bastion.univ.gda.pl' èëè '153.19.7.200' + +6) Òåïåðü â áðàóçåðå ìû ìîæåì íàáðàòü: <èìÿ ñåðâåðà>:50127 è ïîïàäåì íà íàø + êîìïüþòåð. + + 3.2 îáðàòíûé udp-ðåæèì + ---------------------- + + local network |FireWall| Internet + || (udp) + || User 1-------AF Client + || /(tcp) + AF Client <---Encrypted/Compressed channel---> AF Server + / || | + /(udp) || (tcp)| + / || / + Game server || AF Client-------User 2 + || (udp) + + +Äàâàéòå òåïåðü ïîñìîòðèì êàê ìû ìîæåì èñïîëüçîâàòü af äëÿ ïåðåíàïðàâëåíèÿ udp +ïàêåòîâ. Ïðåäïîëîæèì, ÷òî ìû õîòèì ñîçäàòü èãðîâîé ñåðâåð íà íàøåì êîìïüþòåðå +(udp ïîðò 27960): + +1) - 4) òîæå ñàìîå, ÷òî è â ïåðâîì ïðèìåðå. (íî äîáàâëÿåì ïàðàìåòð: -p udp) + +5) Íàáèðàåì â êîíñîëè: + $ ./afclient -u -n <èìÿ ñåðâåðà> -p 27960 + Ãäå <èìÿ ñåðâåðà> ýòî èìÿ (èëè ip) êîìïþòåðà ãäå ðàáîòàåò íàø ñåðâåð. + +6) Ïðîöåññ ñîåäèíåíèÿ ñ èãðîâûì ñåðâåðîì áîëåå ñëîæíûé. Ïîëüçîâàòåëü äîëæåí + çàïóñòèòü fclient ÷òîáû ñäåëàòü ýòî. Îí äîëæåí óêàçàòü ñåðâåð ñ êîòîðûì îí + áóäåò ñîåäèíÿòüñÿ è ïîðò, íà êîòîðîì åãî ïðîãðàììà áóäåò ñëóøàòü: + $ ./afclient -U -d <hostname> -p <ïîðò> -n <èìÿ ñåðâåðà> \ + -m <ïîðò ñåðâåðà> + + Ãäå <hostname> èìÿ ìàøèíû ïîëüçîâàòåëÿ (êîòîðûé ñîåäèíÿåòñÿ ñ èãðîâûì + ñåðâåðîì), <ïîðò> - ëîêàëüíûé ïîðò, <èìÿ ñåðâåðà> - èìÿ ñåðâåðà, <ïîðò + ñåðâåðà> - ïîðò íà êîòîðîì ñåðâåð æäåò ïîëüçîâàòåëåé.Òåïåðü, ÷òîáû ïîïàñòü íà + èãðîâîé ñåðâåð, ïîëüçîâàòåëü äîëæåí ñîåäèíÿòñÿ ñ <hostname>:<ïîðò>. + +================================================================================ + +============================ +4. ÈÇÂÅÑÒÍÛÅ ÎØÈÁÊÈ/ÏÐÎÁËÅÌÛ +============================ + +Íà äàííûé ìîìåíò, íåò íèêàêèõ èçâåñòíûõ ïðîáëåì. + +================================================================================ + +========= +ÇÀÌÅ×ÀÍÈß +========= + +Active port forwarder íàõîäèòñÿ â ðàçðàáîòêå, òàê ÷òî ïîæàëóéñòà, ïðèñûëàéòå +ñâîè êîììåíòàðèè, çàìå÷àíèÿ îá îøèáêàõ è ïðåäëîæåíèÿ íà jeremian [at] poczta.fm + +Åñëè ó âàñ åñòü êàêèå-ëèáî ïðîáëåìû ñ èñïîëüçîâàíèåì ïðîãðàììû èëè âû õîòèòå +ïîäåëèòüñÿ ñâîèì ìíåíèåì î íåé, ïîæàëéñòà îñòàâëÿéòå ñâîè ñîîáùåíèÿ íà: +http://gray-world.net/board/ + +================================================================================ + +============= +ÁËÀÃÎÄÀÐÍÎÑÒÈ +============= + + Áîëüøîå ñïàñèáî êîìàíäå GW: + + Alex <alex [at] gray-world.net> + è Simon <scastro [at] entreelibre.com> çà òåñòèðîâàíèå AF è ìíîæåñòâî ñîâåòîâ. + + Ñïàñèáî Ilia Perevezentsev <iliaper [at] mail.ru> çà êîððåêòèðîâêó àíãëèéñêîé + âåðñèè ýòîãî ôàéëà. + + È ñïàñèáî çà èñïîëüçîâàíèå AF! + +ËÈÖÅÍÇÈß +-------- + + Active Port Forwarder is distributed under the terms of the GNU General + Public License v2.0 and is copyright (c) 2003,2004 jeremian <jeremian [at] + poczta.fm>. See the file COPYING for details. diff --git a/install-sh b/install-sh new file mode 100755 index 0000000..4d4a951 --- /dev/null +++ b/install-sh @@ -0,0 +1,323 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2005-05-14.22 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit $?;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit $?;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit 0 +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: @@ -0,0 +1,360 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2005-06-08.21 + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case "$1" in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + tar try tar, gnutar, gtar, then tar without non-portable flags + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Send bug reports to <bug-automake@gnu.org>." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). +case "$1" in + lex|yacc) + # Not GNU programs, they don't have --version. + ;; + + tar) + if test -n "$run"; then + echo 1>&2 "ERROR: \`tar' requires --run" + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + exit 1 + fi + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case "$1" in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case "$f" in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` + test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison|yacc) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if [ ! -f y.tab.h ]; then + echo >y.tab.h + fi + if [ ! -f y.tab.c ]; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex|flex) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if [ $# -ne 1 ]; then + eval LASTARG="\${$#}" + case "$LASTARG" in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if [ -f "$SRCFILE" ]; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if [ ! -f lex.yy.c ]; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` + fi + if [ -f "$file" ]; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit 1 + fi + ;; + + makeinfo) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + tar) + shift + + # We have already tried tar in the generic part. + # Look for gnutar/gtar before invocation to avoid ugly error + # messages. + if (gnutar --version > /dev/null 2>&1); then + gnutar "$@" && exit 0 + fi + if (gtar --version > /dev/null 2>&1); then + gtar "$@" && exit 0 + fi + firstarg="$1" + if shift; then + case "$firstarg" in + *o*) + firstarg=`echo "$firstarg" | sed s/o//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + case "$firstarg" in + *h*) + firstarg=`echo "$firstarg" | sed s/h//` + tar "$firstarg" "$@" && exit 0 + ;; + esac + fi + + echo 1>&2 "\ +WARNING: I can't seem to be able to run \`tar' with the given arguments. + You may want to install GNU tar or Free paxutils, or check the + command line arguments." + exit 1 + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/mkinstalldirs b/mkinstalldirs new file mode 100755 index 0000000..259dbfc --- /dev/null +++ b/mkinstalldirs @@ -0,0 +1,158 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy + +scriptversion=2005-06-29.22 + +# Original author: Noah Friedman <friedman@prep.ai.mit.edu> +# Created: 1993-05-16 +# Public domain. +# +# This file is maintained in Automake, please report +# bugs to <bug-automake@gnu.org> or send patches to +# <automake-patches@gnu.org>. + +errstatus=0 +dirmode= + +usage="\ +Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ... + +Create each directory DIR (with mode MODE, if specified), including all +leading file name components. + +Report bugs to <bug-automake@gnu.org>." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" + exit $? + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --version) + echo "$0 $scriptversion" + exit $? + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and +# mkdir -p a/c at the same time, both will detect that a is missing, +# one will create a, then the other will try to create a and die with +# a "File exists" error. This is a problem when calling mkinstalldirs +# from a parallel make. We use --version in the probe to restrict +# ourselves to GNU mkdir, which is thread-safe. +case $dirmode in + '') + if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + else + # On NextStep and OpenStep, the `mkdir' command does not + # recognize any option. It will interpret all options as + # directories to create, and then abort because `.' already + # exists. + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version + fi + ;; + *) + if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 && + test ! -d ./--version; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + else + # Clean up after NextStep and OpenStep mkdir. + for d in ./-m ./-p ./--version "./$dirmode"; + do + test -d $d && rmdir $d + done + fi + ;; +esac + +for file +do + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file + shift + IFS=$oIFS + + for d + do + test "x$d" = x && continue + + pathcomp=$pathcomp$d + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr= + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp=$pathcomp/ + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/modules/.deps/exmodule.Po b/modules/.deps/exmodule.Po new file mode 100644 index 0000000..9ce06a8 --- /dev/null +++ b/modules/.deps/exmodule.Po @@ -0,0 +1 @@ +# dummy diff --git a/modules/Makefile b/modules/Makefile new file mode 100644 index 0000000..36ddb2c --- /dev/null +++ b/modules/Makefile @@ -0,0 +1,374 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# modules/Makefile. Generated from Makefile.in by configure. + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + + +srcdir = . +top_srcdir = .. + +pkgdatadir = $(datadir)/apf +pkglibdir = $(libdir)/apf +pkgincludedir = $(includedir)/apf +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = /usr/bin/install -c +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +noinst_PROGRAMS = exmodule$(EXEEXT) +subdir = modules +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +PROGRAMS = $(noinst_PROGRAMS) +am_exmodule_OBJECTS = exmodule.$(OBJEXT) +exmodule_OBJECTS = $(am_exmodule_OBJECTS) +exmodule_LDADD = $(LDADD) +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(exmodule_SOURCES) +DIST_SOURCES = $(exmodule_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = ${SHELL} /home/jslawinski/apf/missing --run aclocal-1.9 +AMDEP_FALSE = # +AMDEP_TRUE = +AMTAR = ${SHELL} /home/jslawinski/apf/missing --run tar +AUTOCONF = ${SHELL} /home/jslawinski/apf/missing --run autoconf +AUTOHEADER = ${SHELL} /home/jslawinski/apf/missing --run autoheader +AUTOMAKE = ${SHELL} /home/jslawinski/apf/missing --run automake-1.9 +AWK = mawk +CC = gcc +CCDEPMODE = depmode=gcc3 +CFLAGS = -pedantic -Wall -O2 -DNDEBUG +CPP = gcc -E +CPPFLAGS = +CYGPATH_W = echo +DEFS = -DHAVE_CONFIG_H +DEPDIR = .deps +ECHO_C = +ECHO_N = -n +ECHO_T = +EGREP = /bin/grep -E +EXEEXT = +GREP = /bin/grep +HAVE_OPENSSL = openssl +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_PROGRAM = ${INSTALL} +INSTALL_SCRIPT = ${INSTALL} +INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s +LDFLAGS = +LIBOBJS = +LIBS = -lcrypto -lnsl -lpthread -lz -lssl +LINKED_LDLIB = -ldl +LTLIBOBJS = +MAKEINFO = ${SHELL} /home/jslawinski/apf/missing --run makeinfo +OBJEXT = o +PACKAGE = apf +PACKAGE_BUGREPORT = jeremian@poczta.fm +PACKAGE_NAME = Active port forwarder +PACKAGE_STRING = Active port forwarder 0.8.4 +PACKAGE_TARNAME = apf +PACKAGE_VERSION = 0.8.4 +PATH_SEPARATOR = : +SET_MAKE = +SHELL = /bin/bash +STRIP = +USE_RDYNAMIC = -rdynamic +VERSION = 0.8.4 +ac_ct_CC = gcc +am__fastdepCC_FALSE = # +am__fastdepCC_TRUE = +am__include = include +am__leading_dot = . +am__quote = +am__tar = ${AMTAR} chof - "$$tardir" +am__untar = ${AMTAR} xf - +bindir = ${exec_prefix}/bin +build_alias = +datadir = ${datarootdir} +datarootdir = ${prefix}/share +docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} +dvidir = ${docdir} +exec_prefix = ${prefix} +host_alias = +htmldir = ${docdir} +includedir = ${prefix}/include +infodir = ${datarootdir}/info +install_sh = /home/jslawinski/apf/install-sh +libdir = ${exec_prefix}/lib +libexecdir = ${exec_prefix}/libexec +localedir = ${datarootdir}/locale +localstatedir = ${prefix}/var +mandir = ${datarootdir}/man +mkdir_p = mkdir -p -- +oldincludedir = /usr/include +pdfdir = ${docdir} +prefix = /usr/local +program_transform_name = s,x,x, +psdir = ${docdir} +sbindir = ${exec_prefix}/sbin +sharedstatedir = ${prefix}/com +sysconfdir = ${prefix}/etc +target_alias = +exmodule_SOURCES = exmodule.c +exmodule_LDFLAGS = -fPIC -shared +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modules/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu modules/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +clean-noinstPROGRAMS: + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) +exmodule$(EXEEXT): $(exmodule_OBJECTS) $(exmodule_DEPENDENCIES) + @rm -f exmodule$(EXEEXT) + $(LINK) $(exmodule_LDFLAGS) $(exmodule_OBJECTS) $(exmodule_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +include ./$(DEPDIR)/exmodule.Po + +.c.o: + if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ + then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +# source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(COMPILE) -c $< + +.c.obj: + if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ + then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +# source='$<' object='$@' libtool=no \ +# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \ +# $(COMPILE) -c `$(CYGPATH_W) '$<'` +uninstall-info-am: + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-noinstPROGRAMS ctags distclean distclean-compile \ + distclean-generic distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/modules/Makefile.am b/modules/Makefile.am new file mode 100644 index 0000000..7e80e7c --- /dev/null +++ b/modules/Makefile.am @@ -0,0 +1,3 @@ +noinst_PROGRAMS = exmodule +exmodule_SOURCES = exmodule.c +exmodule_LDFLAGS = -fPIC -shared diff --git a/modules/Makefile.in b/modules/Makefile.in new file mode 100644 index 0000000..9a8a8a5 --- /dev/null +++ b/modules/Makefile.in @@ -0,0 +1,374 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +noinst_PROGRAMS = exmodule$(EXEEXT) +subdir = modules +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +PROGRAMS = $(noinst_PROGRAMS) +am_exmodule_OBJECTS = exmodule.$(OBJEXT) +exmodule_OBJECTS = $(am_exmodule_OBJECTS) +exmodule_LDADD = $(LDADD) +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(exmodule_SOURCES) +DIST_SOURCES = $(exmodule_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +HAVE_OPENSSL = @HAVE_OPENSSL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LINKED_LDLIB = @LINKED_LDLIB@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_RDYNAMIC = @USE_RDYNAMIC@ +VERSION = @VERSION@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +exmodule_SOURCES = exmodule.c +exmodule_LDFLAGS = -fPIC -shared +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu modules/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu modules/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +clean-noinstPROGRAMS: + -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS) +exmodule$(EXEEXT): $(exmodule_OBJECTS) $(exmodule_DEPENDENCIES) + @rm -f exmodule$(EXEEXT) + $(LINK) $(exmodule_LDFLAGS) $(exmodule_OBJECTS) $(exmodule_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exmodule.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +uninstall-info-am: + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-noinstPROGRAMS mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ + clean-noinstPROGRAMS ctags distclean distclean-compile \ + distclean-generic distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-exec install-exec-am install-info \ + install-info-am install-man install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/modules/exmodule.c b/modules/exmodule.c new file mode 100644 index 0000000..e59d344 --- /dev/null +++ b/modules/exmodule.c @@ -0,0 +1,82 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/* This example module scan the message for specified string and perform + * appropriate action + */ + +/* info + * return values: + * info about module + */ + +char* +info(void) +{ + return "Module tester v0.1"; +} + +/* allow + * return values: + * 0 - allow to connect + * !=0 - drop the connection + */ + +int +allow(char* host, char* port) +{ + return 0; /* allow to connect */ +} + +/* filter + * return values: + * 0 - allow to transfer + * 1 - drop the packet + * 2 - drop the connection + * 3 - release the module + * 4 - drop the packet and release the module + * 5 - drop the connection and release the module + */ + +int +filter(char* host, unsigned char* message, int* length) +{ + int i; + for (i = 1; i < *length; ++i) { + if (message[i-1] == 'M') { + if (message[i] == '1') { + return 1; /* ignored */ + } + if (message[i] == '2') { + return 2; /* dropped */ + } + if (message[i] == '3') { + return 3; /* release */ + } + if (message[i] == '4') { + return 4; /* ignored + release */ + } + if (message[i] == '5') { + return 5; /* dropped + release */ + } + } + } + return 0; /* allow to transfer */ +} diff --git a/src/Makefile.am b/src/Makefile.am new file mode 100644 index 0000000..f16461a --- /dev/null +++ b/src/Makefile.am @@ -0,0 +1,20 @@ +bin_PROGRAMS = afserver afclient +afserver_SOURCES = afserver.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \ + server_remoteadmin.c server_check.c server_set.c server_eval.c server_find.c \ + server_remove.c make_ssl_handshake.c first_run.c inet_ntop.c realmnames.c \ + clientnames.c usernames.c http_proxy_functions.c http_proxy_server.c server_get.c \ + thread_management.c server_signals.c usage.c logging.c daemon.c ssl_fd_struct.c \ + user_stats_struct.c usr_cli_struct.c connect_user_struct.c string_functions.c \ + audit_list_node_struct.c audit_list_struct.c connect_client_struct.c timeval_functions.c \ + header_buffer_struct.c server_realm_struct.c server_configuration_struct.c file_server.c \ + task_struct.c task_list_node_struct.c task_scheduler_struct.c remove_client_task.c +afclient_LDFLAGS = ${USE_RDYNAMIC} ${LINKED_LDLIB} +afclient_SOURCES = afclient.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \ + module_struct.c client_remoteadmin.c make_ssl_handshake.c first_run.c inet_ntop.c \ + http_proxy_functions.c http_proxy_client.c http_proxy_options_struct.c \ + thread_management.c client_reverse_udp.c server_check.c client_initialization.c \ + client_shutdown.c client_signals.c usage.c logging.c daemon.c base64.c ssl_routines.c \ + connect_user_struct.c user_stats_struct.c string_functions.c ar_options_struct.c \ + audit_list_node_struct.c audit_list_struct.c ssl_fd_struct.c timeval_functions.c \ + usr_cli_struct.c header_buffer_struct.c client_configuration_struct.c file_client.c \ + client_realm_struct.c port_list_node_struct.c port_list_struct.c diff --git a/src/Makefile.in b/src/Makefile.in new file mode 100644 index 0000000..23a517c --- /dev/null +++ b/src/Makefile.in @@ -0,0 +1,521 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +bin_PROGRAMS = afserver$(EXEEXT) afclient$(EXEEXT) +subdir = src +DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +PROGRAMS = $(bin_PROGRAMS) +am_afclient_OBJECTS = afclient.$(OBJEXT) network.$(OBJEXT) \ + file.$(OBJEXT) stats.$(OBJEXT) buf_list_node_struct.$(OBJEXT) \ + buf_list_struct.$(OBJEXT) module_struct.$(OBJEXT) \ + client_remoteadmin.$(OBJEXT) make_ssl_handshake.$(OBJEXT) \ + first_run.$(OBJEXT) inet_ntop.$(OBJEXT) \ + http_proxy_functions.$(OBJEXT) http_proxy_client.$(OBJEXT) \ + http_proxy_options_struct.$(OBJEXT) \ + thread_management.$(OBJEXT) client_reverse_udp.$(OBJEXT) \ + server_check.$(OBJEXT) client_initialization.$(OBJEXT) \ + client_shutdown.$(OBJEXT) client_signals.$(OBJEXT) \ + usage.$(OBJEXT) logging.$(OBJEXT) daemon.$(OBJEXT) \ + base64.$(OBJEXT) ssl_routines.$(OBJEXT) \ + connect_user_struct.$(OBJEXT) user_stats_struct.$(OBJEXT) \ + string_functions.$(OBJEXT) ar_options_struct.$(OBJEXT) \ + audit_list_node_struct.$(OBJEXT) audit_list_struct.$(OBJEXT) \ + ssl_fd_struct.$(OBJEXT) timeval_functions.$(OBJEXT) \ + usr_cli_struct.$(OBJEXT) header_buffer_struct.$(OBJEXT) \ + client_configuration_struct.$(OBJEXT) file_client.$(OBJEXT) \ + client_realm_struct.$(OBJEXT) port_list_node_struct.$(OBJEXT) \ + port_list_struct.$(OBJEXT) +afclient_OBJECTS = $(am_afclient_OBJECTS) +afclient_LDADD = $(LDADD) +am_afserver_OBJECTS = afserver.$(OBJEXT) network.$(OBJEXT) \ + file.$(OBJEXT) stats.$(OBJEXT) buf_list_node_struct.$(OBJEXT) \ + buf_list_struct.$(OBJEXT) server_remoteadmin.$(OBJEXT) \ + server_check.$(OBJEXT) server_set.$(OBJEXT) \ + server_eval.$(OBJEXT) server_find.$(OBJEXT) \ + server_remove.$(OBJEXT) make_ssl_handshake.$(OBJEXT) \ + first_run.$(OBJEXT) inet_ntop.$(OBJEXT) realmnames.$(OBJEXT) \ + clientnames.$(OBJEXT) usernames.$(OBJEXT) \ + http_proxy_functions.$(OBJEXT) http_proxy_server.$(OBJEXT) \ + server_get.$(OBJEXT) thread_management.$(OBJEXT) \ + server_signals.$(OBJEXT) usage.$(OBJEXT) logging.$(OBJEXT) \ + daemon.$(OBJEXT) ssl_fd_struct.$(OBJEXT) \ + user_stats_struct.$(OBJEXT) usr_cli_struct.$(OBJEXT) \ + connect_user_struct.$(OBJEXT) string_functions.$(OBJEXT) \ + audit_list_node_struct.$(OBJEXT) audit_list_struct.$(OBJEXT) \ + connect_client_struct.$(OBJEXT) timeval_functions.$(OBJEXT) \ + header_buffer_struct.$(OBJEXT) server_realm_struct.$(OBJEXT) \ + server_configuration_struct.$(OBJEXT) file_server.$(OBJEXT) \ + task_struct.$(OBJEXT) task_list_node_struct.$(OBJEXT) \ + task_scheduler_struct.$(OBJEXT) remove_client_task.$(OBJEXT) +afserver_OBJECTS = $(am_afserver_OBJECTS) +afserver_LDADD = $(LDADD) +DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +SOURCES = $(afclient_SOURCES) $(afserver_SOURCES) +DIST_SOURCES = $(afclient_SOURCES) $(afserver_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +HAVE_OPENSSL = @HAVE_OPENSSL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LINKED_LDLIB = @LINKED_LDLIB@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_RDYNAMIC = @USE_RDYNAMIC@ +VERSION = @VERSION@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +afserver_SOURCES = afserver.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \ + server_remoteadmin.c server_check.c server_set.c server_eval.c server_find.c \ + server_remove.c make_ssl_handshake.c first_run.c inet_ntop.c realmnames.c \ + clientnames.c usernames.c http_proxy_functions.c http_proxy_server.c server_get.c \ + thread_management.c server_signals.c usage.c logging.c daemon.c ssl_fd_struct.c \ + user_stats_struct.c usr_cli_struct.c connect_user_struct.c string_functions.c \ + audit_list_node_struct.c audit_list_struct.c connect_client_struct.c timeval_functions.c \ + header_buffer_struct.c server_realm_struct.c server_configuration_struct.c file_server.c \ + task_struct.c task_list_node_struct.c task_scheduler_struct.c remove_client_task.c + +afclient_LDFLAGS = ${USE_RDYNAMIC} ${LINKED_LDLIB} +afclient_SOURCES = afclient.c network.c file.c stats.c buf_list_node_struct.c buf_list_struct.c \ + module_struct.c client_remoteadmin.c make_ssl_handshake.c first_run.c inet_ntop.c \ + http_proxy_functions.c http_proxy_client.c http_proxy_options_struct.c \ + thread_management.c client_reverse_udp.c server_check.c client_initialization.c \ + client_shutdown.c client_signals.c usage.c logging.c daemon.c base64.c ssl_routines.c \ + connect_user_struct.c user_stats_struct.c string_functions.c ar_options_struct.c \ + audit_list_node_struct.c audit_list_struct.c ssl_fd_struct.c timeval_functions.c \ + usr_cli_struct.c header_buffer_struct.c client_configuration_struct.c file_client.c \ + client_realm_struct.c port_list_node_struct.c port_list_struct.c + +all: all-am + +.SUFFIXES: +.SUFFIXES: .c .o .obj +$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu src/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) +afclient$(EXEEXT): $(afclient_OBJECTS) $(afclient_DEPENDENCIES) + @rm -f afclient$(EXEEXT) + $(LINK) $(afclient_LDFLAGS) $(afclient_OBJECTS) $(afclient_LDADD) $(LIBS) +afserver$(EXEEXT): $(afserver_OBJECTS) $(afserver_DEPENDENCIES) + @rm -f afserver$(EXEEXT) + $(LINK) $(afserver_LDFLAGS) $(afserver_OBJECTS) $(afserver_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afclient.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afserver.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar_options_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/audit_list_node_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/audit_list_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/base64.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buf_list_node_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buf_list_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_configuration_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_initialization.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_realm_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_remoteadmin.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_reverse_udp.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_shutdown.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/client_signals.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clientnames.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/connect_client_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/connect_user_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/daemon.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_client.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file_server.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/first_run.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/header_buffer_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_client.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_functions.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_options_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/http_proxy_server.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inet_ntop.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/logging.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/make_ssl_handshake.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/module_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/network.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/port_list_node_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/port_list_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/realmnames.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remove_client_task.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_check.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_configuration_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_eval.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_find.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_get.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_realm_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_remoteadmin.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_remove.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_set.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/server_signals.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssl_fd_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ssl_routines.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stats.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/string_functions.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_list_node_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_scheduler_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread_management.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timeval_functions.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usage.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/user_stats_struct.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usernames.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/usr_cli_struct.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` +uninstall-info-am: + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(PROGRAMS) +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: install-binPROGRAMS + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-info-am + +.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \ + clean-generic ctags distclean distclean-compile \ + distclean-generic distclean-tags distdir dvi dvi-am html \ + html-am info info-am install install-am install-binPROGRAMS \ + install-data install-data-am install-exec install-exec-am \ + install-info install-info-am install-man install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \ + uninstall-am uninstall-binPROGRAMS uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/src/activefor.h b/src/activefor.h new file mode 100644 index 0000000..6a73c69 --- /dev/null +++ b/src/activefor.h @@ -0,0 +1,97 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_ACTIVEFOR_H +#define _JS_ACTIVEFOR_H + +#include "network.h" +#include "buf_list_struct.h" +#include "audit_list_struct.h" +#include "usr_cli_struct.h" +#include "connect_user_struct.h" +#include "ssl_fd_struct.h" +#include "connect_client_struct.h" + +#define AF_S_CONCLOSED 1 +#define AF_S_CONOPEN 2 +#define AF_S_MESSAGE 3 +#define AF_S_CLOSING 4 +#define AF_S_LOGIN 8 +#define AF_S_DONT_SEND 9 +#define AF_S_CAN_SEND 10 +#define AF_S_CANT_OPEN 12 +#define AF_S_ENABLE_MULTI 18 + +#define AF_S_WRONG 13 +#define AF_S_ADMIN_LOGIN 14 +#define AF_S_ADMIN_CMD 15 + +#define AF_S_KEEP_ALIVE 16 + +#define S_STATE_CLEAR 0 +#define S_STATE_CLOSING 5 +#define S_STATE_OPENING 6 +#define S_STATE_OPEN 7 +#define S_STATE_STOPPED 11 +#define S_STATE_OPENING_CLOSED 17 +#define S_STATE_KICKING 19 + +#define AF_VER(info) info" v0.8.4" + +#define TYPE_TCP 1 +#define TYPE_UDP 3 +#define TYPE_SSL 4 +#define TYPE_ZLIB 8 +#define TYPE_IPV4 16 +#define TYPE_IPV6 32 +#define TYPE_SUPPORTS_MULTI 64 +#define TYPE_COMP 0x4000 + +#define TYPE_SET_ZERO(type) (type=0) +#define TYPE_IS_SET(type) (type&1) +#define TYPE_IS_UDP(type) TYPE_IS_SET(type)&&(type&2) +#define TYPE_IS_TCP(type) TYPE_IS_SET(type)&&(!(type&2)) +#define TYPE_SET_UDP(type) (type|=TYPE_UDP) +#define TYPE_SET_TCP(type) (type|=TYPE_TCP) +#define TYPE_SET_SSL(type) (type|=TYPE_SSL) +#define TYPE_UNSET_SSL(type) (type&=(~TYPE_SSL)) +#define TYPE_IS_SSL(type) (type&TYPE_SSL) +#define TYPE_SET_ZLIB(type) (type|=TYPE_ZLIB) +#define TYPE_UNSET_ZLIB(type) (type&=(~TYPE_ZLIB)) +#define TYPE_IS_ZLIB(type) (type&TYPE_ZLIB) + +#define TYPE_SET_IPV4(type) (type|=TYPE_IPV4) +#define TYPE_UNSET_IPV4(type) (type&=(~TYPE_IPV4)) +#define TYPE_IS_IPV4(type) (type&TYPE_IPV4) +#define TYPE_SET_IPV6(type) (type|=TYPE_IPV6) +#define TYPE_UNSET_IPV6(type) (type&=(~TYPE_IPV6)) +#define TYPE_IS_IPV6(type) (type&TYPE_IPV6) +#define TYPE_SET_UNSPEC(type) (type&=(~(TYPE_IPV4|TYPE_IPV6))) +#define TYPE_IS_UNSPEC(type) (!(type&(TYPE_IPV4|TYPE_IPV6))) + +#define TYPE_SET_SUPPORTED_MULTI(type) (type|=TYPE_SUPPORTS_MULTI) +#define TYPE_UNSET_SUPPORTED_MULTI(type) (type&=(~TYPE_SUPPORTS_MULTI)) +#define TYPE_IS_SUPPORTED_MULTI(type) (type&TYPE_SUPPORTS_MULTI) + +#define TYPE_SET_COMP(type) (type|=TYPE_COMP) +#define TYPE_IS_COMP(type) (type&TYPE_COMP) + +#endif + diff --git a/src/afclient.c b/src/afclient.c new file mode 100644 index 0000000..fbafcc1 --- /dev/null +++ b/src/afclient.c @@ -0,0 +1,1500 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "afclient.h" + +static struct option long_options[] = { + {"help", 0, 0, 'h'}, + {"udpmode", 0, 0, 'u'}, + {"reverseudp", 0, 0, 'U'}, + {"servername", 1, 0, 'n'}, + {"manageport", 1, 0, 'm'}, + {"hostname", 1, 0, 'd'}, + {"portnum", 1, 0, 'p'}, + {"verbose", 0, 0, 'v'}, + {"keyfile", 1, 0, 'k'}, + {"cerfile", 1, 0, 'c'}, + {"storefile", 1, 0, 's'}, + {"cfgfile", 1, 0, 'f'}, + {"log", 1, 0, 'o'}, + {"pass", 1, 0, 301}, + {"ignorepkeys", 0, 0, 302}, +#ifdef AF_INET6 + {"ipv4", 0, 0, '4'}, + {"ipv6", 0, 0, '6'}, +#endif +#ifdef HAVE_LIBDL + {"load", 1, 0, 'l'}, + {"Load", 1, 0, 'L'}, +#endif + {"id", 1, 0, 'i'}, + {"dateformat", 1, 0, 'D'}, + {"remoteadmin", 0, 0, 'r'}, +#ifdef HAVE_LIBPTHREAD + {"use-https", 0, 0, 'S'}, + {"proxyname", 1, 0, 'P'}, + {"proxyport", 1, 0, 'X'}, + {"pa-t-basic", 0, 0, 'B'}, + {"pa-cred", 1, 0, 'C'}, +#endif + {"version", 0, 0, 'V'}, + {"keep-alive", 1, 0, 'K'}, + {"ar-tries", 1, 0, 'A'}, + {"ar-delay", 1, 0, 'T'}, + {"ar-start", 0, 0, 305}, + {"ar-quit", 0, 0, 306}, + {"noar", 0, 0, 307}, + {"localname", 1, 0, 311}, + {"localport", 1, 0, 312}, + {"localdesname", 1, 0, 313}, + {0, 0, 0, 0} +}; + +ClientConfiguration* cconfig; + +int +main(int argc, char **argv) +{ + + /* + * variables + */ + + int i, n, numofcon, length, buflength, temp, temp2 = 0; +#ifdef HAVE_LINUX_SOCKIOS_H + int notsent; + socklen_t aLength; +#endif + ConnectUser** usersTable = NULL; + unsigned char buff[9000]; + char hostname[100]; + int maxfdp1; + socklen_t addressLength; + struct sockaddr* clientAddress; + fd_set rset, allset, wset, tmpset; + struct timeval keepAlive; + char verbose = 0; + HttpProxyOptions* hpo = HttpProxyOptions_new(); + char hpoUsed = 0; + ArOptions* ao = ArOptions_new(); + ClientRealm* pointer; + char aoUsed = 0; + char passwordWasSet = 0; + char* realmId = NULL; + char* serverName = NULL; + char* managePort = NULL; + char* hostName = NULL; + PortList* destinationPorts = PortList_new(); + char* localName = NULL; + char* localPort = NULL; + char* localDestinationName = NULL; + char* keys = NULL; + char* certif = NULL; + char* store = NULL; + char* dateformat = NULL; + char* kaTimeout = NULL; + char* filenam = NULL; + char ipFamily = 0; + unsigned char password[4] = {1, 2, 3, 4}; + char udpMode = 0; + char reverseMode = 0; + char remoteMode = 0; + char realmType = 0; + char ignorePublicKeys = 0; + struct sigaction act; +#ifdef HAVE_LIBDL + Module *moduleA = Module_new(), *moduleB = Module_new(); +#endif + SSL_METHOD* method; + SSL_CTX* ctx = NULL; + + /* + * initialization + */ + +#ifdef HAVE_LIBPTHREAD + if (hpo == NULL) { + printf("Problems with memory allocation... exiting\n"); + exit(1); + } +#endif + + if (ao == NULL) { + printf("Problems with memory allocation... exiting\n"); + exit(1); + } + +#ifdef HAVE_LIBDL + if ((moduleA == NULL) || (moduleB == NULL)) { + printf("Problems with memory allocation... exiting\n"); + exit(1); + } +#endif + sigfillset(&(act.sa_mask)); + act.sa_flags = 0; + + act.sa_handler = SIG_IGN; + sigaction(SIGPIPE, &act, NULL); + act.sa_handler = client_sig_int; + sigaction(SIGINT, &act, NULL); + sigaction(SIGTERM, &act, NULL); + act.sa_handler = client_sig_alrm; + sigaction(SIGALRM, &act, NULL); + +#ifdef HAVE_LIBPTHREAD + remember_mainthread(); +#endif + +#ifdef AF_INET6 +#define GETOPT_LONG_AF_INET6(x) "46"x +#else +#define GETOPT_LONG_AF_INET6(x) x +#endif +#ifdef HAVE_LIBPTHREAD +#define GETOPT_LONG_LIBPTHREAD(x) "SP:X:BC:"x +#else +#define GETOPT_LONG_LIBPTHREAD(x) x +#endif +#ifdef HAVE_LIBDL +#define GETOPT_LONG_LIBDL(x) "l:L:"x +#else +#define GETOPT_LONG_LIBDL(x) x +#endif + + while ((n = getopt_long(argc, argv, + GETOPT_LONG_LIBDL(GETOPT_LONG_LIBPTHREAD( + GETOPT_LONG_AF_INET6("huUn:m:d:p:vk:c:s:o:i:D:rP:X:VK:A:T:f:"))) + , long_options, 0)) != -1) { + switch (n) { + case 'h': { + client_long_usage(AF_VER("Active port forwarder (client)")); + break; + } + case 'n': { + serverName = optarg; + break; + } +#ifdef HAVE_LIBPTHREAD + case 'S': { + HttpProxyOptions_use_https(hpo); + hpoUsed = 1; + break; + } + case 'P': { + HttpProxyOptions_set_proxyname(hpo, optarg); + hpoUsed = 1; + break; + } + case 'X': { + HttpProxyOptions_set_proxyport(hpo, optarg); + hpoUsed = 1; + break; + } + case 'B': { + HttpProxyOptions_set_proxyauth_type(hpo, PROXYAUTH_TYPE_BASIC); + hpoUsed = 1; + break; + } + case 'C': { + HttpProxyOptions_set_proxyauth_cred(hpo, optarg); + hpoUsed = 1; + break; + } +#endif + case 'i': { + realmId = optarg; + break; + } + case 'm': { + managePort = optarg; + break; + } + case 'd': { + hostName = optarg; + break; + } + case 'p': { + PortList_insert_back(destinationPorts, PortListNode_new(optarg)); + break; + } + case 'v': { + ++verbose; + break; + } + case 'u': { + udpMode = 1; + break; + } + case 'U': { + reverseMode = 1; + break; + } + case 'k': { + keys = optarg; + break; + } + case 'c': { + certif = optarg; + break; + } + case 's': { + store = optarg; + break; + } + case 'f': { + filenam = optarg; + break; + } + case 'o': { + addlogtarget(optarg); + break; + } + case 301: { + n = strlen(optarg); + memset(password, 0, 4); + for (i = 0; i < n; ++i) { + password[i%4] += optarg[i]; + } + passwordWasSet = 1; + break; + } + case 302: { + ignorePublicKeys = 1; + break; + } + case 305: { + ArOptions_set_arStart(ao, AR_OPTION_ENABLED); + aoUsed = 1; + break; + } + case 306: { + ArOptions_set_arQuit(ao, AR_OPTION_ENABLED); + aoUsed = 1; + break; + } + case 307: { + ArOptions_set_arPremature(ao, AR_OPTION_DISABLED); + aoUsed = 1; + break; + } + case 311: { + localName = optarg; + break; + } + case 312: { + localPort = optarg; + break; + } + case 313: { + localDestinationName = optarg; + break; + } +#ifdef AF_INET6 + case '4': { + if (ipFamily != 0) { + ipFamily = -1; + } + else { + ipFamily = 4; + } + break; + } + case '6': { + if (ipFamily != 0) { + ipFamily = -1; + } + else { + ipFamily = 6; + } + break; + } +#endif +#ifdef HAVE_LIBDL + case 'l': { + Module_set_fileName(moduleA, optarg); + break; + } + case 'L': { + Module_set_fileName(moduleB, optarg); + break; + } +#endif + case 'D': { + dateformat = optarg; + break; + } + case 'r': { + remoteMode = 1; + break; + } + case 'V': { + printf("%s\n", (AF_VER("Active port forwarder (client)"))); + exit(0); + break; + } + case 'K': { + kaTimeout = optarg; + break; + } + case 'A': { + ArOptions_set_s_arTries(ao, optarg); + aoUsed = 1; + break; + } + case 'T': { + ArOptions_set_s_arDelay(ao, optarg); + aoUsed = 1; + break; + } + case '?': { + client_short_usage(""); + break; + } + } + } + + if (optind < argc) { + client_short_usage("Unrecognized non-option elements"); + } + + if (filenam != NULL) { + cconfig = cparsefile(filenam, &n); + if (n) { + printf("parsing failed! line:%d\n", n); + exit(1); + } + else { + if (keys == NULL) { + if (ClientConfiguration_get_keysFile(cconfig) == NULL) { + ClientConfiguration_set_keysFile(cconfig, "client.rsa"); + } + } + else { + ClientConfiguration_set_keysFile(cconfig, keys); + } + if (certif != NULL) { + ClientConfiguration_set_certificateFile(cconfig, certif); + } + if (store == NULL) { + if (ClientConfiguration_get_storeFile(cconfig) == NULL) { + ClientConfiguration_set_storeFile(cconfig, "known_hosts"); + } + } + else { + ClientConfiguration_set_storeFile(cconfig, store); + } + if (dateformat != NULL) { + ClientConfiguration_set_dateFormat(cconfig, dateformat); + } + if (ignorePublicKeys) { + ClientConfiguration_set_ignorePublicKeys(cconfig, ignorePublicKeys); + } + + initializelogging(verbose, ClientConfiguration_get_dateFormat(cconfig)); + + aflog(LOG_T_INIT, LOG_I_INFO, + "client's cfg file OK! (readed realms: %d)", ClientConfiguration_get_realmsNumber(cconfig)); + if ((ClientConfiguration_get_realmsNumber(cconfig) == 0) || + (ClientConfiguration_get_realmsTable(cconfig) == NULL) || + ((pointer = ClientConfiguration_get_realmsTable(cconfig)[0]) == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Working without sense is really without sense..."); + exit(1); + } + if (hpoUsed) { + ClientRealm_set_httpProxyOptions(pointer, hpo); + } + else { + HttpProxyOptions_free(&hpo); + } + if (aoUsed) { + ClientRealm_set_arOptions(pointer, ao); + } + else { + ArOptions_free(&ao); + } + if ((serverName != NULL) && (ClientRealm_get_serverName(pointer) == NULL)) { + ClientRealm_set_serverName(pointer, serverName); + } + if ((managePort != NULL) && (ClientRealm_get_managePort(pointer) == NULL)) { + ClientRealm_set_managePort(pointer, managePort); + } + if ((hostName != NULL) && (ClientRealm_get_hostName(pointer) == NULL)) { + ClientRealm_set_hostName(pointer, hostName); + } + if ((PortList_get_size(destinationPorts) != 0) && + (PortList_get_size(ClientRealm_get_destinationPorts(pointer)) == 0)) { + ClientRealm_set_destinationPorts(pointer, destinationPorts); + } + if ((realmId != NULL) && (ClientRealm_get_realmId(pointer) == NULL)) { + ClientRealm_set_realmId(pointer, realmId); + } + if ((localName != NULL) && (ClientRealm_get_localName(pointer) == NULL)) { + ClientRealm_set_localName(pointer, localName); + } + if ((localPort != NULL) && (ClientRealm_get_localPort(pointer) == NULL)) { + ClientRealm_set_localPort(pointer, localPort); + } + if ((localDestinationName != NULL) & (ClientRealm_get_localDestinationName(pointer) == NULL)) { + ClientRealm_set_localDestinationName(pointer, localDestinationName); + } + if ((kaTimeout != NULL) && (ClientRealm_get_sKeepAliveTimeout(pointer) == NULL)) { + ClientRealm_set_sKeepAliveTimeout(pointer, kaTimeout); + } + if (reverseMode) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: reverseudp will be ignored"); + } + if (udpMode) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: udpmode will be ignored"); + } + if (remoteMode) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: remoteadmin will be ignored"); + } + if (passwordWasSet) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: pass will be ignored"); + } +#ifdef HAVE_LIBDL + if (Module_get_fileName(moduleA)) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: load will be ignored"); + } + if (Module_get_fileName(moduleB)) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Load will be ignored"); + } +#endif + } + } + else { + cconfig = ClientConfiguration_new(); + if (cconfig == NULL) { + printf("Can't allocate memory for client configuration... exiting\n"); + exit(1); + } + ClientConfiguration_set_keysFile(cconfig, keys); + ClientConfiguration_set_certificateFile(cconfig, certif); + ClientConfiguration_set_storeFile(cconfig, store); + ClientConfiguration_set_dateFormat(cconfig, dateformat); + ClientConfiguration_set_realmsNumber(cconfig, 1); + ClientConfiguration_set_ignorePublicKeys(cconfig, ignorePublicKeys); + + initializelogging(verbose, ClientConfiguration_get_dateFormat(cconfig)); + + if (ClientConfiguration_get_keysFile(cconfig) == NULL) { + ClientConfiguration_set_keysFile(cconfig, "client.rsa"); + } + if (ClientConfiguration_get_storeFile(cconfig) == NULL) { + ClientConfiguration_set_storeFile(cconfig, "known_hosts"); + } + ClientConfiguration_set_realmsTable(cconfig, + calloc(ClientConfiguration_get_realmsNumber(cconfig), sizeof(ClientRealm*))); + if (ClientConfiguration_get_realmsTable(cconfig) == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Can't allocate memory for ClientRealm* table... exiting"); + exit(1); + } + pointer = ClientRealm_new(); + if (pointer == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Can't allocate memory for ClientRealm structure... exiting"); + exit(1); + } + + ClientConfiguration_get_realmsTable(cconfig)[0] = pointer; + ClientRealm_set_serverName(pointer, serverName); + ClientRealm_set_managePort(pointer, managePort); + ClientRealm_set_hostName(pointer, hostName); + ClientRealm_set_destinationPorts(pointer, destinationPorts); + ClientRealm_set_realmId(pointer, realmId); + ClientRealm_set_httpProxyOptions(pointer, hpo); + ClientRealm_set_arOptions(pointer, ao); + ClientRealm_set_password(pointer, password); + ClientRealm_set_localName(pointer, localName); + ClientRealm_set_localPort(pointer, localPort); + ClientRealm_set_localDestinationName(pointer, localDestinationName); + ClientRealm_set_realmId(pointer, realmId); + ClientRealm_set_sKeepAliveTimeout(pointer, kaTimeout); +#ifdef HAVE_LIBDL + ClientRealm_set_userModule(pointer, moduleA); + ClientRealm_set_serviceModule(pointer, moduleB); +#endif + + if (reverseMode) { + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_REVERSE); + } + else { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_UNKNOWN); + } + } + if (udpMode) { + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_UDP); + } + else { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_UNKNOWN); + } + } + if (remoteMode) { + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_REMOTE); + } + else { + ClientRealm_set_clientMode(pointer, CLIENTREALM_MODE_UNKNOWN); + } + } + } + + /* + * WARNING: we have only one ClientRealm at the moment + */ + + if (ClientRealm_get_serverName(pointer) == NULL) { + client_short_usage("Name of the server is required"); + } + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_UNKNOWN) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Conflicting/unknown client modes... exiting"); + exit(1); + } + if (ClientRealm_get_managePort(pointer) == NULL) { + ClientRealm_set_managePort(pointer, "50126"); + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_REVERSE) + client_short_usage("Port on the server is required in reverse mode"); + } +#ifdef HAVE_LIBPTHREAD + if ((HttpProxyOptions_get_proxyname(ClientRealm_get_httpProxyOptions(pointer))) || + (HttpProxyOptions_get_proxyport(ClientRealm_get_httpProxyOptions(pointer)))) { + if (ClientRealm_get_tunnelType(pointer) == CLIENTREALM_TUNNELTYPE_DIRECT) { + ClientRealm_set_tunnelType(pointer, CLIENTREALM_TUNNELTYPE_HTTPPROXY); + } + else { + ClientRealm_set_tunnelType(pointer, CLIENTREALM_TUNNELTYPE_UNKNOWN); + } + } + if (ClientRealm_get_tunnelType(pointer) == CLIENTREALM_TUNNELTYPE_HTTPPROXY) { + if (HttpProxyOptions_get_proxyport(ClientRealm_get_httpProxyOptions(pointer)) == NULL) { + HttpProxyOptions_set_proxyport(ClientRealm_get_httpProxyOptions(pointer), "8080"); + } + } +#endif + if ((ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REVERSE) && + (ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REMOTE) && + (ClientRealm_get_hostName(pointer) == NULL)) { + gethostname(hostname, 100); + ClientRealm_set_hostName(pointer, hostname); + } + if ((ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REMOTE) && + (PortList_get_size(ClientRealm_get_destinationPorts(pointer)) == 0)) { + client_short_usage("Destination port number is required"); + } + + if (ClientRealm_get_sKeepAliveTimeout(pointer)) { + ClientRealm_set_keepAliveTimeout(pointer, + check_value(ClientRealm_get_sKeepAliveTimeout(pointer), "Invalid timeout value")); + keepAlive.tv_sec = ClientRealm_get_keepAliveTimeout(pointer); + keepAlive.tv_usec = 0; + ClientRealm_set_keepAlive(pointer, keepAlive); + } + ArOptions_evaluate_values(ClientRealm_get_arOptions(pointer)); + + if (ignorePublicKeys) { + ClientConfiguration_set_ignorePublicKeys(cconfig, ignorePublicKeys); + } + +#ifdef HAVE_LIBDL + if (Module_loadModule(ClientRealm_get_userModule(pointer))) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Loading a module %s failed!", Module_get_fileName(ClientRealm_get_userModule(pointer))); + exit(1); + } + if (Module_loadModule(ClientRealm_get_serviceModule(pointer))) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Loading a module %s failed!", Module_get_fileName(ClientRealm_get_serviceModule(pointer))); + exit(1); + } +#endif + + TYPE_SET_ZERO(realmType); + TYPE_SET_SSL(realmType); + TYPE_SET_ZLIB(realmType); + +#ifdef AF_INET6 + if ((ipFamily != 0) && (ClientRealm_get_ipFamily(pointer) <= 0)) { + ClientRealm_set_ipFamily(pointer, ipFamily); + } + if (ClientRealm_get_ipFamily(pointer) == -1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Conflicting types of ip protocol family... exiting"); + exit(1); + } + else if (ClientRealm_get_ipFamily(pointer) == 4) { + TYPE_SET_IPV4(realmType); + } + else if (ClientRealm_get_ipFamily(pointer) == 6) { + TYPE_SET_IPV6(realmType); + } +#endif + ipFamily = 0x01; +#ifdef AF_INET6 + if (TYPE_IS_IPV4(realmType)) { + ipFamily |= 0x02; + } + else if (TYPE_IS_IPV6(realmType)) { + ipFamily |= 0x04; + } +#endif + + ClientRealm_set_ipFamily(pointer, ipFamily); + ClientRealm_set_realmType(pointer, realmType); + + if (ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REVERSE) { + SSL_library_init(); + method = SSLv3_client_method(); + ctx = SSL_CTX_new(method); + if (SSL_CTX_set_cipher_list(ctx, "ALL:@STRENGTH") == 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting cipher list failed... exiting"); + exit(1); + } + if ((temp2 = create_apf_dir(0))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Creating ~/.apf directory failed (%d)", temp2); + if ((temp2 = create_apf_dir(1))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Creating ./apf directory failed (%d)", temp2); + } + } + store = ClientConfiguration_get_storeFile(cconfig); + if ((temp2 = create_publickey_store(&store))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Something bad happened when creating public key store... (%d)", temp2); + } + ClientConfiguration_set_storeFile(cconfig, store); + keys = ClientConfiguration_get_keysFile(cconfig); + if ((temp2 = generate_rsa_key(&keys))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Something bad happened when generating rsa keys... (%d)", temp2); + } + ClientConfiguration_set_keysFile(cconfig, keys); + if (SSL_CTX_use_RSAPrivateKey_file(ctx, keys, SSL_FILETYPE_PEM) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting rsa key failed (%s)... exiting", keys); + exit(1); + } + + certif = ClientConfiguration_get_certificateFile(cconfig); + if (certif) { + if (SSL_CTX_use_certificate_file(ctx, certif, SSL_FILETYPE_PEM) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting certificate failed (%s)... exiting", certif); + exit(1); + } + } + + if ((ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REMOTE) && + (!verbose)) + daemon(0, 0); + + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_REMOTE) { + temp2 = -1; + if (PortList_get_size(ClientRealm_get_destinationPorts(pointer)) > 0) { + if (ip_listen(&n, ClientRealm_get_serverName(pointer), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(pointer), 0)), + &addressLength, + ClientRealm_get_ipFamily(pointer))) { +#ifdef AF_INET6 + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_listen_%s error for %s, %s", + (ClientRealm_get_ipFamily(pointer) & 0x02) ? + "ipv4" : + (ClientRealm_get_ipFamily(pointer) & 0x04) ? + "ipv6" : + "unspec", + ClientRealm_get_serverName(pointer), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(pointer), 0))); +#else + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_listen error for %s, %s", ClientRealm_get_serverName(pointer), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(pointer), 0))); +#endif + exit(1); + } + clientAddress = malloc(addressLength); + if (clientAddress == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Can't allocate memory for sockaddr structure... exiting"); + exit(1); + } + ClientRealm_set_addressLength(pointer, addressLength); + ClientRealm_set_clientAddress(pointer, clientAddress); + temp2 = accept(n, ClientRealm_get_clientAddress(pointer), &addressLength); + } + } + + } + + i = ArOptions_get_arTries(ClientRealm_get_arOptions(pointer)); + SslFd_set_fd(ClientRealm_get_masterSslFd(pointer), -1); + + do { + temp = 0; + if (SslFd_get_fd(ClientRealm_get_masterSslFd(pointer)) != -1) { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer))); + } + ClientRealm_closeUsersConnections(pointer); + SslFd_set_ssl(ClientRealm_get_masterSslFd(pointer), NULL); + + if (ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_REVERSE) { + if (temp == 0) { + if (initialize_client_stage1(pointer, ctx, buff, + (ArOptions_get_arStart(ClientRealm_get_arOptions(pointer)) == AR_OPTION_ENABLED) ? 0 : 1, + ClientConfiguration_get_ignorePublicKeys(cconfig))) { + temp = 1; + } + } + + if ((temp == 0) && (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_REMOTE)) { + return client_admin(ClientRealm_get_realmType(pointer), + ClientRealm_get_masterSslFd(pointer), buff, temp2, + ClientRealm_get_realmId(pointer)); + } + + if (temp == 0) { + realmType = ClientRealm_get_realmType(pointer); + if (initialize_client_stage2(pointer, buff, + (ArOptions_get_arStart(ClientRealm_get_arOptions(pointer)) == AR_OPTION_ENABLED) ? 0 : 1)) { + temp = 1; + } + } + } /* !reverse */ + else { + if (initialize_client_reverse_udp(pointer)) { + temp = 1; + } + } + + if (temp == 0) { + if (initialize_client_stage3(pointer, &buflength, &allset, &wset, &maxfdp1, + (ArOptions_get_arStart(ClientRealm_get_arOptions(pointer)) == AR_OPTION_ENABLED) ? 0 : 1)) { + temp = 1; + } + } + + /* UDP REVERSE MODE */ + + if ((temp == 0) && (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_REVERSE)) { + client_reverse_udp(pointer, buff, buflength); + } + + if (i > 0) { + --i; + } + if ((i != 0) && (temp == 1)) { + aflog(LOG_T_INIT, LOG_I_INFO, + "Trying to reconnect..."); + mysleep(ArOptions_get_arDelay(ClientRealm_get_arOptions(pointer))); + ClientRealm_set_realmType(pointer, realmType); + } + if (temp == 0) { + break; + } + } while (i); + + /* NORMAL MODE */ + + aflog(LOG_T_CLIENT, LOG_I_INFO, + "CLIENT STARTED mode: %s", (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_UDP) ? "udp" : "tcp"); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "SERVER SSL: %s, ZLIB: %s, MODE: %s", (TYPE_IS_SSL(ClientRealm_get_realmType(pointer))) ? "yes" : "no", + (TYPE_IS_ZLIB(ClientRealm_get_realmType(pointer))) ? "yes" : "no", + (TYPE_IS_TCP(ClientRealm_get_realmType(pointer))) ? "tcp" : "udp"); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "SERVER MULTI: %s", (TYPE_IS_SUPPORTED_MULTI(ClientRealm_get_realmType(pointer))) ? "yes" : "no"); + aflog(LOG_T_CLIENT, LOG_I_NOTICE, + "CIPHER: %s VER: %s", SSL_get_cipher_name(SslFd_get_ssl(ClientRealm_get_masterSslFd(pointer))), + SSL_get_cipher_version(SslFd_get_ssl(ClientRealm_get_masterSslFd(pointer)))); +#ifdef HAVE_LIBDL + if (Module_isModuleLoaded(ClientRealm_get_userModule(pointer))) { + aflog(LOG_T_CLIENT, LOG_I_INFO, + "LOADED MODULE: %s INFO: %s", Module_get_fileName(ClientRealm_get_userModule(pointer)), + Module_function_info(ClientRealm_get_userModule(pointer))); + } + if (Module_isModuleLoaded(ClientRealm_get_serviceModule(pointer))) { + aflog(LOG_T_CLIENT, LOG_I_INFO, + "LOADED MODULE (ser): %s INFO: %s", Module_get_fileName(ClientRealm_get_serviceModule(pointer)), + Module_function_info(ClientRealm_get_serviceModule(pointer))); + } +#endif + + ClientRealm_send_realmId(pointer, buff); + ClientRealm_enable_multi(pointer); + + for ( ; ; ) { + rset = allset; + tmpset = wset; + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "select"); + if (ClientRealm_get_sKeepAliveTimeout(pointer)) { + if (select(maxfdp1, &rset, &tmpset, NULL, ClientRealm_get_keepAlivePointer(pointer)) == 0) { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "timeout: sending keep-alive packet"); + buff[0] = AF_S_KEEP_ALIVE; + SslFd_send_message(ClientRealm_get_realmType(pointer), + ClientRealm_get_masterSslFd(pointer), buff, 5); + keepAlive.tv_sec = ClientRealm_get_keepAliveTimeout(pointer); + keepAlive.tv_usec = 0; + ClientRealm_set_keepAlive(pointer, keepAlive); + } + } + else { + select(maxfdp1, &rset, &tmpset, NULL, NULL); + } + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "after select..."); + + usersTable = ClientRealm_get_usersTable(pointer); + for (i = 0; i < ClientRealm_get_usersLimit(pointer); ++i) { + if ((ConnectUser_get_state(usersTable[i]) == S_STATE_OPEN) || + (ConnectUser_get_state(usersTable[i]) == S_STATE_STOPPED) || + (ConnectUser_get_state(usersTable[i]) == S_STATE_KICKING)) { + if (FD_ISSET(ConnectUser_get_connFd(usersTable[i]), &rset)) { /* FD_ISSET CONTABLE[i].CONNFD RSET */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: FD_ISSET", i); + n = read(ConnectUser_get_connFd(usersTable[i]), &buff[5], 8091); + if (n == -1) { + if (errno == EAGAIN) { + continue; + } + aflog(LOG_T_USER, LOG_I_ERR, + "error (%d): while reading from service", errno); + n = 0; + } +#ifdef HAVE_LINUX_SOCKIOS_H +# ifdef SIOCOUTQ + if (ioctl(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer)), SIOCOUTQ, ¬sent)) { + aflog(LOG_T_USER, LOG_I_CRIT, + "ioctl error -> exiting..."); + exit(1); + } + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_UDP) { + aLength = 4; + if (getsockopt(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer)), + SOL_SOCKET, SO_SNDBUF, &temp2, &aLength) != -1) { + if (temp2 != buflength) { + buflength = temp2; + aflog(LOG_T_USER, LOG_I_WARNING, + "Send buffer size changed..."); + } + } + if (buflength <= notsent + n + 5) { /* when we can't send this */ + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d]: DROP size:%d, buf:%d, w:%d/%d", i, n+5, buflength, notsent, buflength); +# else + if (ioctl(master.commfd, TIOCOUTQ, ¬sent)) { + aflog(LOG_T_USER, LOG_I_CRIT, + "ioctl error -> exiting..."); + exit(1); + } + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_UDP) { + len = 4; + if (getsockopt(master.commfd, SOL_SOCKET, SO_SNDBUF, &temp2, &len) != -1) { + if (temp2 != buflength) { + buflength = temp2; + aflog(LOG_T_USER, LOG_I_WARNING, + "Send buffer size changed..."); + } + } + if (notsent <= n + 5) { /* when we can't send this */ + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d]: DROP size:%d, buf:%d, w:%d/%d", + i, n+5, buflength, buflength-notsent, buflength); +# endif + continue; /* drop this packet */ + } + } +#endif + if (n) { +#ifdef HAVE_LIBDL + if (Module_isModuleLoaded(ClientRealm_get_serviceModule(pointer))) { + switch ((temp2 = Module_function_filter(ClientRealm_get_serviceModule(pointer), + ConnectUser_get_nameBuf(usersTable[i]), &buff[5], &n))) { + case 1: case 4: { + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d] (by ser): PACKET IGNORED BY MODULE", i); + if (temp2 == 4) { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE (ser): %s INFO: %s", + Module_get_fileName(ClientRealm_get_serviceModule(pointer)), + Module_function_info(ClientRealm_get_serviceModule(pointer))); + Module_releaseModule(ClientRealm_get_serviceModule(pointer)); + } + continue; + break; + } + case 2: case 5: { + aflog(LOG_T_USER, LOG_I_NOTICE, + "user[%d] (by ser): DROPPED BY MODULE", i); + close(ConnectUser_get_connFd(usersTable[i])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", i, ConnectUser_get_connFd(usersTable[i])); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &wset); + ConnectUser_set_state(usersTable[i], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(usersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + if (temp2 == 5) { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE (ser): %s INFO: %s", + Module_get_fileName(ClientRealm_get_serviceModule(pointer)), + Module_function_info(ClientRealm_get_serviceModule(pointer))); + Module_releaseModule(ClientRealm_get_serviceModule(pointer)); + } + continue; + break; + } + case 3: { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE (ser): %s INFO: %s", + Module_get_fileName(ClientRealm_get_serviceModule(pointer)), + Module_function_info(ClientRealm_get_serviceModule(pointer))); + Module_releaseModule(ClientRealm_get_serviceModule(pointer)); + break; + } + } + } +#endif + buff[0] = AF_S_MESSAGE; /* sending message */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ +#ifdef HAVE_LINUX_SOCKIOS_H + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: TO msglen: %d [%d/%d]", i, n, +# ifdef SIOCOUTQ + notsent +# else + buflength - notsent +# endif + , buflength); +#else + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: TO msglen: %d", i, n); +#endif + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, n+5); + } + else if (ClientRealm_get_clientMode(pointer) != CLIENTREALM_MODE_UDP) { + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: CLOSING", i); + close(ConnectUser_get_connFd(usersTable[i])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", i, ConnectUser_get_connFd(usersTable[i])); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &wset); + if (ConnectUser_get_state(usersTable[i]) == S_STATE_KICKING) { + ConnectUser_set_state(usersTable[i], S_STATE_CLEAR); + } + else { + ConnectUser_set_state(usersTable[i], S_STATE_CLOSING); + } + BufList_clear(ConnectUser_get_bufList(usersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + } + } /* - FD_ISSET CONTABLE[i].CONNFD RSET */ + } + } + for (i = 0; i < ClientRealm_get_usersLimit(pointer); ++i) { + if ((ConnectUser_get_state(usersTable[i]) == S_STATE_STOPPED) || + (ConnectUser_get_state(usersTable[i]) == S_STATE_KICKING)) { + if (FD_ISSET(ConnectUser_get_connFd(usersTable[i]), &tmpset)) { /* FD_ISSET CONTABLE[i].CONNFD TMPSET */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: FD_ISSET - WRITE", i); + n = BufListNode_readMessageLength(BufList_get_first(ConnectUser_get_bufList(usersTable[i]))); + temp2 = write(ConnectUser_get_connFd(usersTable[i]), + BufListNode_readMessage(BufList_get_first(ConnectUser_get_bufList(usersTable[i]))), n); + if ((temp2 > 0) && (temp2 != n)) { + BufListNode_set_actPtr(BufList_get_first(ConnectUser_get_bufList(usersTable[i])), + BufListNode_get_actPtr(BufList_get_first(ConnectUser_get_bufList(usersTable[i]))) + temp2); + } + else if ((temp2 == -1) && (errno == EAGAIN)) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: Couldn't write?", i); + } + else if (temp2 == -1) { + close(ConnectUser_get_connFd(usersTable[i])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", i, ConnectUser_get_connFd(usersTable[i])); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &wset); + if (ConnectUser_get_state(usersTable[i]) == S_STATE_KICKING) { + ConnectUser_set_state(usersTable[i], S_STATE_CLEAR); + } + else { + ConnectUser_set_state(usersTable[i], S_STATE_CLOSING); + } + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), + ClientRealm_get_masterSslFd(pointer), buff, 5); + } + else { + BufList_delete_first(ConnectUser_get_bufList(usersTable[i])); + if (BufList_get_first(ConnectUser_get_bufList(usersTable[i])) == NULL) { + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &wset); + buff[0] = AF_S_CAN_SEND; /* stopping transfer */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "FROM user[%d]: BUFFERING MESSAGE ENDED", i); + SslFd_send_message(ClientRealm_get_realmType(pointer), + ClientRealm_get_masterSslFd(pointer), buff, 5); + if (ConnectUser_get_state(usersTable[i]) == S_STATE_KICKING) { + close(ConnectUser_get_connFd(usersTable[i])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", i, ConnectUser_get_connFd(usersTable[i])); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[i]), &wset); + ConnectUser_set_state(usersTable[i], S_STATE_CLEAR); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), + ClientRealm_get_masterSslFd(pointer), buff, 5); + } + else { + ConnectUser_set_state(usersTable[i], S_STATE_OPEN); + } + } + } + } /* - FD_ISSET CONTABLE[i].CONNFD TMPSET */ + } + } + if (FD_ISSET(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer)), &rset)) { /* FD_ISSET MASTER.COMMFD RSET */ + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "masterfd: FD_ISSET"); + n = SslFd_get_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + if (n != 5) { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "FATAL ERROR! (%d)", n); + if (n == -1) { + if (TYPE_IS_SSL(ClientRealm_get_realmType(pointer))) { + get_ssl_error(ClientRealm_get_masterSslFd(pointer), "FE", n); + continue; /* what happened? */ + } + } + if (n != 0) + exit(1); + } + if (n == 0) { /* server quits -> we do the same... */ + i = ArOptions_get_arTries(ClientRealm_get_arOptions(pointer)); + if (ArOptions_get_arPremature(ClientRealm_get_arOptions(pointer)) == AR_OPTION_DISABLED) { + i = 0; + } + if (i) { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "SERVER: premature quit -> auto-reconnect enabled"); + } + while (i) { + ClientRealm_closeUsersConnections(pointer); + close(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer))); + SslFd_set_ssl(ClientRealm_get_masterSslFd(pointer), NULL); + mysleep(ArOptions_get_arDelay(ClientRealm_get_arOptions(pointer))); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Trying to reconnect..."); + + temp2 = 0; + if (temp2 == 0) { + if (initialize_client_stage1(pointer, ctx, buff, 0, + ClientConfiguration_get_ignorePublicKeys(cconfig))) { + temp2 = 1; + } + } + if (temp2 == 0) { + if (initialize_client_stage2(pointer, buff, 0)) { + temp2 = 1; + } + } + if (temp2 == 0) { + if (initialize_client_stage3(pointer, &buflength, &allset, &wset, &maxfdp1, 0)) { + temp2 = 1; + } + } + + if (temp2 == 0) { + n = 1; + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Reconnected successfully..."); + usersTable = ClientRealm_get_usersTable(pointer); + + ClientRealm_send_realmId(pointer, buff); + ClientRealm_enable_multi(pointer); + + break; + } + + if (i > 0) { + --i; + } + } + if (n == 0) { + aflog(LOG_T_CLIENT, LOG_I_CRIT, + "SERVER: premature quit -> exiting..."); + exit(1); + } + continue; + } + numofcon = buff[1]; + numofcon = numofcon << 8; + numofcon += buff[2]; /* this is id of user */ + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + switch (buff[0]) { + case AF_S_CONCLOSED : { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: AF_S_CONCLOSED", numofcon); + if ((numofcon>=0) && (numofcon<=ClientRealm_get_usersLimit(pointer))) { + if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_CLOSING) { + ConnectUser_set_state(usersTable[numofcon], S_STATE_CLEAR); + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: CLOSE CONFIRMED", numofcon); + } + else if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_OPEN) { + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: CLOSED", numofcon); + close(ConnectUser_get_connFd(usersTable[numofcon])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", numofcon, ConnectUser_get_connFd(usersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &wset); + ConnectUser_set_state(usersTable[numofcon], S_STATE_CLEAR); + BufList_clear(ConnectUser_get_bufList(usersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + } + else if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_STOPPED) { + ConnectUser_set_state(usersTable[numofcon], S_STATE_KICKING); + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: CLOSING...", numofcon); + } + } + break; + } + case AF_S_CONOPEN : { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: AF_S_CONOPEN", numofcon); + if ((numofcon>=0) && (numofcon<=ClientRealm_get_usersLimit(pointer))) { + if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_CLEAR) { + n = SslFd_get_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, length); + ConnectUser_set_nameBuf(usersTable[numofcon], (char*) buff); + ConnectUser_set_portBuf(usersTable[numofcon], (char*) &buff[128]); + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: OPENING", numofcon); + aflog(LOG_T_USER, LOG_I_INFO, + "user[%d]: IP:%s PORT:%s", numofcon, + ConnectUser_get_nameBuf(usersTable[numofcon]), ConnectUser_get_portBuf(usersTable[numofcon])); +#ifdef HAVE_LIBDL + if (Module_isModuleLoaded(ClientRealm_get_userModule(pointer)) && + Module_function_allow(ClientRealm_get_userModule(pointer), + ConnectUser_get_nameBuf(usersTable[numofcon]), + ConnectUser_get_portBuf(usersTable[numofcon]))) { + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d]: IT'S NOT ALLOWED - DROPPING", numofcon); + buff[0] = AF_S_CANT_OPEN; /* not opening connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + continue; + } +#endif + if (ClientRealm_get_clientMode(pointer) == CLIENTREALM_MODE_UDP) { + ipFamily = 0; + } + else { + ipFamily = 0x01; + } +#ifdef AF_INET6 + if (TYPE_IS_IPV4(ClientRealm_get_realmType(pointer))) { + ipFamily |= 0x02; + } + else if (TYPE_IS_IPV6(ClientRealm_get_realmType(pointer))) { + ipFamily |= 0x04; + } +#endif + temp2 = 0; + if (n == 136) { + if (PortList_get_size(ClientRealm_get_destinationPorts(pointer)) == 1) { + temp2 = 0; + } + else { + temp2 = buff[135] % PortList_get_size(ClientRealm_get_destinationPorts(pointer)); + } + } + if (ip_connect(&temp, ClientRealm_get_hostName(pointer), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(pointer), temp2)), ipFamily, + ClientRealm_get_localDestinationName(pointer), NULL)) { + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d]: CAN'T CONNECT to %s:%s - DROPPING", numofcon, + ClientRealm_get_hostName(pointer), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(pointer), temp2))); + buff[0] = AF_S_CANT_OPEN; /* not opening connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + continue; + } + ConnectUser_set_connFd(usersTable[numofcon], temp); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Setting connFd: %d", numofcon, temp); + temp2 = fcntl(ConnectUser_get_connFd(usersTable[numofcon]), F_GETFL, 0); + fcntl(ConnectUser_get_connFd(usersTable[numofcon]), F_SETFL, temp2 | O_NONBLOCK); + FD_SET(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + maxfdp1 = (maxfdp1 > (ConnectUser_get_connFd(usersTable[numofcon]) + 1)) ? + maxfdp1 : (ConnectUser_get_connFd(usersTable[numofcon]) + 1); + buff[0] = AF_S_CONOPEN; /* opening connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + ConnectUser_set_state(usersTable[numofcon], S_STATE_OPEN); + } + } + break; + } + case AF_S_MESSAGE : { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: AF_S_MESSAGE", numofcon); + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: FROM msglen: %d", numofcon, length); + n = SslFd_get_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, length); + if ((numofcon>=0) && (numofcon<=ClientRealm_get_usersLimit(pointer))) { + if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_OPEN) { +#ifdef HAVE_LIBDL + if (Module_isModuleLoaded(ClientRealm_get_userModule(pointer))) { + switch ((temp2 = Module_function_filter(ClientRealm_get_userModule(pointer), + ConnectUser_get_nameBuf(usersTable[numofcon]), buff, &n))) { + case 1: case 4:{ + aflog(LOG_T_USER, LOG_I_WARNING, + "user[%d]: PACKET IGNORED BY MODULE", numofcon); + if (temp2 == 4) { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE: %s INFO: %s", + Module_get_fileName(ClientRealm_get_userModule(pointer)), + Module_function_info(ClientRealm_get_userModule(pointer))); + Module_releaseModule(ClientRealm_get_userModule(pointer)); + } + continue; + break; + } + case 2: case 5:{ + aflog(LOG_T_USER, LOG_I_NOTICE, + "user[%d]: DROPPED BY MODULE", numofcon); + close(ConnectUser_get_connFd(usersTable[numofcon])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", numofcon, ConnectUser_get_connFd(usersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &wset); + ConnectUser_set_state(usersTable[numofcon], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(usersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + if (temp2 == 5) { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE: %s INFO: %s", + Module_get_fileName(ClientRealm_get_userModule(pointer)), + Module_function_info(ClientRealm_get_userModule(pointer))); + Module_releaseModule(ClientRealm_get_userModule(pointer)); + } + continue; + break; + } + case 3: { + aflog(LOG_T_MAIN, LOG_I_INFO, + "RELEASED MODULE: %s INFO: %s", + Module_get_fileName(ClientRealm_get_userModule(pointer)), + Module_function_info(ClientRealm_get_userModule(pointer))); + Module_releaseModule(ClientRealm_get_userModule(pointer)); + break; + } + } + } +#endif + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: FROM msglen: %d SENT", numofcon, n); + temp2 = write(ConnectUser_get_connFd(usersTable[numofcon]), buff, n); + if ((temp2 > 0) && (temp2 != n)) { + BufList_insert_back(ConnectUser_get_bufList(usersTable[numofcon]), + BufListNode_new_message(temp2, n, buff)); + ConnectUser_set_state(usersTable[numofcon], S_STATE_STOPPED); + FD_SET(ConnectUser_get_connFd(usersTable[numofcon]), &wset); + buff[0] = AF_S_DONT_SEND; /* stopping transfer */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "FROM user[%d]: BUFFERING MESSAGE STARTED", numofcon); + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + } + else if ((temp2 == -1) && (errno == EAGAIN)) { + BufList_insert_back(ConnectUser_get_bufList(usersTable[numofcon]), + BufListNode_new_message(0, n, buff)); + ConnectUser_set_state(usersTable[numofcon], S_STATE_STOPPED); + FD_SET(ConnectUser_get_connFd(usersTable[numofcon]), &wset); + buff[0] = AF_S_DONT_SEND; /* stopping transfer */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "FROM user[%d]: BUFFERING MESSAGE STARTED", numofcon); + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + } + else if (temp2 == -1) { + close(ConnectUser_get_connFd(usersTable[numofcon])); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "user[%d]: Closing connFd: %d", numofcon, ConnectUser_get_connFd(usersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &wset); + ConnectUser_set_state(usersTable[numofcon], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(usersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = numofcon >> 8; /* high bits of user number */ + buff[2] = numofcon; /* low bits of user number */ + SslFd_send_message(ClientRealm_get_realmType(pointer), ClientRealm_get_masterSslFd(pointer), buff, 5); + } + } + else if (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_STOPPED) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "FROM user[%d]: BUFFERING MESSAGE", numofcon); + BufList_insert_back(ConnectUser_get_bufList(usersTable[numofcon]), + BufListNode_new_message(0, n, buff)); + } + } + break; + } + case AF_S_CLOSING : { /* server shut down */ + n = 0; + i = ArOptions_get_arTries(ClientRealm_get_arOptions(pointer)); + if (ArOptions_get_arQuit(ClientRealm_get_arOptions(pointer)) == AR_OPTION_DISABLED) { + i = 0; + } + if (i) { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "SERVER: CLOSED -> auto-reconnect enabled"); + } + while (i) { + ClientRealm_closeUsersConnections(pointer); + close(SslFd_get_fd(ClientRealm_get_masterSslFd(pointer))); + SslFd_set_ssl(ClientRealm_get_masterSslFd(pointer), NULL); + mysleep(ArOptions_get_arDelay(ClientRealm_get_arOptions(pointer))); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Trying to reconnect..."); + + temp2 = 0; + if (temp2 == 0) { + if (initialize_client_stage1(pointer, ctx, buff, 0, + ClientConfiguration_get_ignorePublicKeys(cconfig))) { + temp2 = 1; + } + } + if (temp2 == 0) { + if (initialize_client_stage2(pointer, buff, 0)) { + temp2 = 1; + } + } + if (temp2 == 0) { + if (initialize_client_stage3(pointer, &buflength, &allset, &wset, &maxfdp1, 0)) { + temp2 = 1; + } + } + + if (temp2 == 0) { + n = 1; + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Reconnected successfully..."); + usersTable = ClientRealm_get_usersTable(pointer); + + ClientRealm_send_realmId(pointer, buff); + ClientRealm_enable_multi(pointer); + + break; + } + + if (i > 0) { + --i; + } + } + if (n == 0) { + aflog(LOG_T_CLIENT, LOG_I_INFO, + "SERVER: CLOSED -> exiting... cg: %ld bytes", getcg()); + exit(1); + } + break; + } + case AF_S_DONT_SEND: { + if ((ConnectUser_get_state(usersTable[numofcon]) == S_STATE_OPEN) || + (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_STOPPED)) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: AF_S_DONT_SEND", numofcon); + FD_CLR(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + } + else { + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: AF_S_DONT_SEND - ignored", numofcon); + } + break; + } + case AF_S_CAN_SEND: { + if ((ConnectUser_get_state(usersTable[numofcon]) == S_STATE_OPEN) || + (ConnectUser_get_state(usersTable[numofcon]) == S_STATE_STOPPED)) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: AF_S_CAN_SEND", numofcon); + FD_SET(ConnectUser_get_connFd(usersTable[numofcon]), &allset); + } + else { + aflog(LOG_T_USER, LOG_I_DEBUG, + "user[%d]: AF_S_CAN_SEND - ignored", numofcon); + } + break; + } + default : { /* unrecognized type of message -> exiting... */ + aflog(LOG_T_CLIENT, LOG_I_ERR, + "SERVER: unrecognized message -> exiting... cg: %ld bytes", getcg()); + exit(1); + break; + } + } + } /* - FD_ISSET MASTER.COMMFD RSET */ + } +} diff --git a/src/afclient.h b/src/afclient.h new file mode 100644 index 0000000..1be222d --- /dev/null +++ b/src/afclient.h @@ -0,0 +1,63 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "network.h" +#include "file.h" +#include "stats.h" +#include "module_struct.h" +#include "client_remoteadmin.h" +#include "make_ssl_handshake.h" +#include "first_run.h" +#include "http_proxy_client.h" +#include "thread_management.h" +#include "client_reverse_udp.h" +#include "server_check.h" +#include "client_initialization.h" +#include "http_proxy_functions.h" +#include "http_proxy_options_struct.h" +#include "client_shutdown.h" +#include "client_signals.h" +#include "usage.h" +#include "logging.h" +#include "audit_list_struct.h" +#include "daemon.h" +#include "ar_options_struct.h" +#include "port_list_struct.h" + +#include <openssl/rsa.h> +#include <openssl/ssl.h> +#include <openssl/err.h> +#include <sys/time.h> +#include <sys/ioctl.h> +#ifdef HAVE_LINUX_SOCKIOS_H +#include <linux/sockios.h> +#endif +#include <signal.h> +#include <string.h> +#include <fcntl.h> + +#include <getopt.h> + +#ifndef _JS_AFCLIENT_H +#define _JS_AFCLIENT_H + +#endif + diff --git a/src/afserver.c b/src/afserver.c new file mode 100644 index 0000000..f509404 --- /dev/null +++ b/src/afserver.c @@ -0,0 +1,2617 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "afserver.h" + +static struct option long_options[] = { + {"help", 0, 0, 'h'}, + {"hostname", 1, 0, 'n'}, + {"listenport", 1, 0, 'l'}, + {"manageport", 1, 0, 'm'}, + {"timeout", 1, 0, 't'}, + {"maxidle", 1, 0, 321}, + {"verbose", 0, 0, 'v'}, + {"users", 1, 0, 'u'}, + {"clients", 1, 0, 'C'}, + {"realm", 1, 0, 'r'}, + {"raclients", 1, 0, 'R'}, + {"usrpcli", 1, 0, 'U'}, + {"climode", 1, 0, 'M'}, + {"cerfile", 1, 0, 'c'}, + {"cacerfile", 1, 0, 'A'}, + {"cerdepth", 1, 0, 'd'}, + {"keyfile", 1, 0, 'k'}, + {"cfgfile", 1, 0, 'f'}, + {"proto", 1, 0, 'p'}, + {"log", 1, 0, 'o'}, + {"audit", 0, 0, 'a'}, + {"nossl", 0, 0, 301}, + {"nozlib", 0, 0, 302}, + {"pass", 1, 0, 303}, +#ifdef AF_INET6 + {"ipv4", 0, 0, '4'}, + {"ipv6", 0, 0, '6'}, +#endif + {"baseport", 0, 0, 'b'}, + {"dnslookups", 0, 0, 311}, + {"dateformat", 1, 0, 'D'}, +#ifdef HAVE_LIBPTHREAD + {"enableproxy", 0, 0, 'P'}, + /* FIXME: don't need it now + {"use-https", 0, 0, 'S'}, + */ +#endif + {"version", 0, 0, 'V'}, + {0, 0, 0, 0} +}; + +ServerConfiguration* config; + +int +main(int argc, char **argv) +{ + int i, j=0, k, l, n, flags, sent = 0, temp; + socklen_t len; + unsigned char buff[9000]; + int maxfdp1; + fd_set rset, allset, wset, tmpset; + int numofcon, length; + char* name = NULL; + char** listen = NULL; + int listencount = 0; + char** manage = NULL; + int managecount = 0; + char* amount = NULL; + char* clients = NULL; + char* raclients = NULL; + char* usrpcli = NULL; + char* clim = NULL; + char* filenam = NULL; + char* type = NULL; + char* timeout = NULL; + char* maxidle = NULL; + char* realmname = NULL; + unsigned char pass[4] = {1, 2, 3, 4}; + char verbose = 0; + char mode = 0; +#ifdef HAVE_LIBPTHREAD + char tunneltype = 0; +#endif + char ipfam = 0; + char baseport = 0; + char audit = 0; + char dnslookups = 0; + ServerRealm* pointer = NULL; + TaskScheduler* scheduler; + Task* task; + struct sigaction act; + time_t now; + ServerRealm** scRealmsTable; + UsrCli** srUsersClientsTable; + ConnectUser** srUsersTable; + ConnectClient** srClientsTable; + ConnectClient** srRaClientsTable; + + char* certif = NULL; + char* cacertif = NULL; + char* cerdepth = NULL; + char* keys = NULL; + char* dateformat = NULL; + static char* stemp = NULL; + + SSL_METHOD* method; + SSL_CTX* ctx; + SSL* tmp_ssl; + + sigfillset(&(act.sa_mask)); + act.sa_flags = 0; + + act.sa_handler = SIG_IGN; + sigaction(SIGPIPE, &act, NULL); + act.sa_handler = server_sig_int; + sigaction(SIGINT, &act, NULL); + sigaction(SIGTERM, &act, NULL); + + TYPE_SET_SSL(mode); + TYPE_SET_ZLIB(mode); + TYPE_SET_SUPPORTED_MULTI(mode); + +#ifdef HAVE_LIBPTHREAD + remember_mainthread(); +#endif + +#ifdef AF_INET6 +#define GETOPT_LONG_AF_INET6(x) "46"x +#else +#define GETOPT_LONG_AF_INET6(x) x +#endif +#ifdef HAVE_LIBPTHREAD +/* FIXME: 'S' option is not needed now +#define GETOPT_LONG_LIBPTHREAD(x) "PS"x +*/ +#define GETOPT_LONG_LIBPTHREAD(x) "P"x +#else +#define GETOPT_LONG_LIBPTHREAD(x) x +#endif + + while ((n = getopt_long(argc, argv, + GETOPT_LONG_LIBPTHREAD(GETOPT_LONG_AF_INET6("hn:l:m:vu:c:A:d:k:f:p:o:t:C:U:M:abD:R:r:V")) + , long_options, 0)) != -1) { + switch (n) { + case 'h': { + server_long_usage(AF_VER("Active port forwarder (server)")); + break; + } + case 'n': { + name = optarg; + break; + } + case 'l': { + ++listencount; + listen = realloc(listen, sizeof(char*)); + listen[listencount-1] = optarg; + break; + } + case 'm': { + ++managecount; + manage = realloc(manage, sizeof(char*)); + manage[managecount-1] = optarg; + break; + } + case 't': { + timeout = optarg; + break; + } + case 321: { + maxidle = optarg; + break; + } + case 'v': { + ++verbose; + break; + } + case 'u': { + amount = optarg; + break; + } + case 'C': { + clients = optarg; + break; + } + case 'r': { + realmname = optarg; + break; + } + case 'R': { + raclients = optarg; + break; + } + case 'U': { + usrpcli = optarg; + break; + } + case 'M': { + clim = optarg; + break; + } + case 'c': { + certif = optarg; + break; + } + case 'A': { + cacertif = optarg; + break; + } + case 'd': { + cerdepth = optarg; + break; + } + case 'k': { + keys = optarg; + break; + } + case 'p': { + type = optarg; + break; + } + case 'f': { + filenam = optarg; + break; + } + case 'o': { + addlogtarget(optarg); + break; + } + case 301: { + TYPE_UNSET_SSL(mode); + break; + } + case 302: { + TYPE_UNSET_ZLIB(mode); + break; + } + case 303: { + n = strlen(optarg); + memset(pass, 0, 4); + for (i = 0; i < n; ++i) { + pass[i%4] += optarg[i]; + } + sent = 1; + break; + } +#ifdef AF_INET6 + case '4': { + if (ipfam != 0) { + ipfam = -1; + } + else { + ipfam = 4; + } + break; + } + case '6': { + if (ipfam != 0) { + ipfam = -1; + } + else { + ipfam = 6; + } + break; + } +#endif + case 'b': { + baseport = 1; + break; + } + case 'a': { + audit = 1; + break; + } + case 311: { + dnslookups = 1; + break; + } + case 'D': { + dateformat = optarg; + break; + } +#ifdef HAVE_LIBPTHREAD + case 'P': { + if ((tunneltype < 0) || (tunneltype > 2)) { + tunneltype = -1; + } + else { + if (tunneltype != 2) { + tunneltype = 1; + } + } + break; + } + /* FIXME: don't need it now + case 'S': { + if ((tunneltype < 0) || (tunneltype > 2)) { + tunneltype = -1; + } + else { + tunneltype = 2; + } + break; + } + */ +#endif + case 'V': { + printf("%s\n", (AF_VER("Active port forwarder (server)"))); + exit(0); + break; + } + case '?': { + server_short_usage(""); + break; + } + } + } + + if (optind < argc) { + server_short_usage("Unrecognized non-option elements"); + } + + if (filenam != NULL) { + config = parsefile(filenam, &n); + if (n) { + printf("parsing failed! line:%d\n", n); + exit(1); + } + else { + if (certif == NULL) { + if (ServerConfiguration_get_certificateFile(config) == NULL) { + ServerConfiguration_set_certificateFile(config, "server-cert.pem"); + } + } + else { + ServerConfiguration_set_certificateFile(config, certif); + } + if (cacertif != NULL) { + ServerConfiguration_set_cacertificateFile(config, cacertif); + } + if (cerdepth != NULL) { + ServerConfiguration_set_sCertificateDepth(config, cerdepth); + } + if (keys == NULL) { + if (ServerConfiguration_get_keysFile(config) == NULL) { + ServerConfiguration_set_keysFile(config, "server.rsa"); + } + } + else { + ServerConfiguration_set_keysFile(config, keys); + } + if (dateformat != NULL) { + ServerConfiguration_set_dateFormat(config, dateformat); + } + + initializelogging(verbose, ServerConfiguration_get_dateFormat(config)); + + aflog(LOG_T_INIT, LOG_I_INFO, + "cfg file OK! (readed realms: %d)", ServerConfiguration_get_realmsNumber(config)); + if (name != NULL) + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: hostname=%s will be ignored", name); + if (listen != NULL) + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: listenport will be ignored"); + if (manage != NULL) + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: manageport will be ignored"); + if (realmname != NULL) + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: realmname=%s will be ignored", realmname); + if (sent == 1) + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: password from command line will be ignored"); + } + } + else { + config = ServerConfiguration_new(); + if (config == NULL) { + printf("Can't allocate memory for server configuration... exiting\n"); + exit(1); + } + ServerConfiguration_set_certificateFile(config, certif); + ServerConfiguration_set_cacertificateFile(config, cacertif); + ServerConfiguration_set_sCertificateDepth(config, cerdepth); + ServerConfiguration_set_keysFile(config, keys); + ServerConfiguration_set_dateFormat(config, dateformat); + + initializelogging(verbose, ServerConfiguration_get_dateFormat(config)); + + if (listen == NULL) { + listencount = 1; + listen = calloc(1, sizeof(char*)); + listen[0] = "50127"; + } + if (manage == NULL) { + managecount = 1; + manage = calloc(1, sizeof(char*)); + manage[0] = "50126"; + } + if (managecount != listencount) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Number of listen and manage options are not the same... exiting"); + exit(1); + } + if (ServerConfiguration_get_certificateFile(config) == NULL) { + ServerConfiguration_set_certificateFile(config, "server-cert.pem"); + } + if (ServerConfiguration_get_keysFile(config) == NULL) { + ServerConfiguration_set_keysFile(config, "server.rsa"); + } + if (type == NULL) { + type = "tcp"; + } + ServerConfiguration_set_realmsNumber(config, 1); + scRealmsTable = calloc(1, sizeof(ServerRealm*)); + if (scRealmsTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with allocating memory for ServerRealm* table... exiting"); + exit(1); + } + ServerConfiguration_set_realmsTable(config, scRealmsTable); + pointer = ServerRealm_new(); + if (pointer == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with allocating memory for ServerRealm structure... exiting"); + exit(1); + } + scRealmsTable[0] = pointer; + ServerRealm_set_hostName(pointer, name); + ServerRealm_set_userClientPairs(pointer, managecount); + srUsersClientsTable = calloc(managecount, sizeof(UsrCli*)); + if (srUsersClientsTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with allocating memory for UsrCli* table... exiting"); + exit(1); + } + ServerRealm_set_usersClientsTable(pointer, srUsersClientsTable); + for (i = 0; i < managecount; ++i) { + srUsersClientsTable[i] = UsrCli_new(); + if (srUsersClientsTable[i] == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with allocating memory for UsrCli structure... exiting"); + exit(1); + } + UsrCli_set_listenPortName(srUsersClientsTable[i], listen[i]); + UsrCli_set_managePortName(srUsersClientsTable[i], manage[i]); + } + ServerRealm_set_sUsersLimit(pointer, amount); + ServerRealm_set_sClientsLimit(pointer, clients); + ServerRealm_set_sRaClientsLimit(pointer, raclients); + ServerRealm_set_sTimeout(pointer, timeout); + ServerRealm_set_sMaxIdle(pointer, maxidle); + ServerRealm_set_sUsersPerClient(pointer, usrpcli); + ServerRealm_set_sClientMode(pointer, clim); + ServerRealm_set_basePortOn(pointer, baseport); + ServerRealm_set_auditOn(pointer, audit); +#ifdef HAVE_LIBPTHREAD + ServerRealm_set_tunnelType(pointer, tunneltype); +#endif + ServerRealm_set_dnsLookupsOn(pointer, dnslookups); + ServerRealm_set_realmName(pointer, realmname); + ServerRealm_set_password(pointer, pass); + if (strcmp(type, "tcp") == 0) { + temp = ServerRealm_get_realmType(pointer); + TYPE_SET_TCP(temp); + ServerRealm_set_realmType(pointer, temp); + } + else if (strcmp(type, "udp") == 0) { + temp = ServerRealm_get_realmType(pointer); + TYPE_SET_UDP(temp); + ServerRealm_set_realmType(pointer, temp); + } + else { + temp = ServerRealm_get_realmType(pointer); + TYPE_SET_ZERO(temp); + ServerRealm_set_realmType(pointer, temp); + } +#ifdef AF_INET6 + if (ipfam == -1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Conflicting types of ip protocol family... exiting"); + exit(1); + } + else if (ipfam == 4) { + temp = ServerRealm_get_realmType(pointer); + TYPE_SET_IPV4(temp); + ServerRealm_set_realmType(pointer, temp); + } + else if (ipfam == 6) { + temp = ServerRealm_get_realmType(pointer); + TYPE_SET_IPV6(temp); + ServerRealm_set_realmType(pointer, temp); + } +#endif + temp = ServerRealm_get_realmType(pointer); + temp |= mode; + ServerRealm_set_realmType(pointer, temp); + } + + maxfdp1 = 0; + + SSL_library_init(); + method = SSLv3_server_method(); + ctx = SSL_CTX_new(method); + if (SSL_CTX_set_cipher_list(ctx, "ALL:@STRENGTH") == 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting ciphers list failed... exiting"); + exit(1); + } + if ((flags = create_apf_dir(0))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Creating ~/.apf directory failed (%d)", flags); + if ((flags = create_apf_dir(1))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Creating ./apf directory failed (%d)", flags); + } + } + keys = ServerConfiguration_get_keysFile(config); + if ((flags = generate_rsa_key(&keys))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Something bad happened when generating rsa keys... (%d)", flags); + } + ServerConfiguration_set_keysFile(config, keys); + if (SSL_CTX_use_RSAPrivateKey_file(ctx, ServerConfiguration_get_keysFile(config), SSL_FILETYPE_PEM) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting rsa key failed (%s)... exiting", ServerConfiguration_get_keysFile(config)); + exit(1); + } + certif = ServerConfiguration_get_certificateFile(config); + if ((flags = generate_certificate(&certif, ServerConfiguration_get_keysFile(config)))) { + aflog(LOG_T_INIT, LOG_I_WARNING, + "Warning: Something bad happened when generating certificate... (%d)", flags); + } + ServerConfiguration_set_certificateFile(config, certif); + if (SSL_CTX_use_certificate_file(ctx, + ServerConfiguration_get_certificateFile(config), SSL_FILETYPE_PEM) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting certificate failed (%s)... exiting", ServerConfiguration_get_certificateFile(config)); + exit(1); + } + + cacertif = ServerConfiguration_get_cacertificateFile(config); + if (cacertif) { + if (SSL_CTX_load_verify_locations(ctx, + cacertif, + NULL) + != 1) + { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Setting CA certificate failed (%s)... exiting", cacertif); + exit(1); + } + + SSL_CTX_set_verify (ctx, SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT, + NULL); + + cerdepth = ServerConfiguration_get_sCertificateDepth (config); + if (cerdepth == NULL) { + cerdepth = "9"; + } + SSL_CTX_set_verify_depth(ctx, check_value_liberal (cerdepth, "Invalid max certificate-depth")); + } + + if (ServerConfiguration_get_realmsNumber(config) == 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Working without sense is really without sense..."); + exit(1); + } + + FD_ZERO(&allset); + FD_ZERO(&wset); + + if (!verbose) + daemon(0, 0); + + scheduler = TaskScheduler_new(); + if (scheduler == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problems with creating task scheduler... exiting"); + exit(1); + } + + scRealmsTable = ServerConfiguration_get_realmsTable(config); + for (i = 0; i < ServerConfiguration_get_realmsNumber(config); ++i) { + if (ServerRealm_get_userClientPairs(scRealmsTable[i]) == 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "You have to specify at least one listen port and one manage port in each realm"); + exit(1); + } + srUsersClientsTable = ServerRealm_get_usersClientsTable(scRealmsTable[i]); + for (j = 0; j < ServerRealm_get_userClientPairs(scRealmsTable[i]); ++j) { + if ((UsrCli_get_listenPortName(srUsersClientsTable[j]) == NULL) || + (UsrCli_get_managePortName(srUsersClientsTable[j]) == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Missing some of the variables...\nRealm: %d\nlistenport[%d]: %s\nmanageport[%d]: %s", + i, j, UsrCli_get_listenPortName(srUsersClientsTable[j]), + j, UsrCli_get_managePortName(srUsersClientsTable[j])); + exit(1); + } + } + /* checking type of the realm */ + if (!TYPE_IS_SET(ServerRealm_get_realmType(scRealmsTable[i]))) { + if (type != NULL) { + if (strcmp(type, "tcp") == 0) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_TCP(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + else if (strcmp(type, "udp") == 0) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_UDP(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + else { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_TCP(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + } + else { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_TCP(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + } +#ifdef AF_INET6 + /* using user's value for ipfam*/ + if (TYPE_IS_UNSPEC(ServerRealm_get_realmType(scRealmsTable[i]))) { + if (ipfam == -1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Conflicting types of ip protocol family... exiting"); + exit(1); + } + else if (ipfam == 4) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_IPV4(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + else if (ipfam == 6) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_SET_IPV6(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + } +#endif + /* using user's values for zlib and ssl mode*/ + if (!TYPE_IS_SSL(mode)) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_UNSET_SSL(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + if (!TYPE_IS_ZLIB(mode)) { + temp = ServerRealm_get_realmType(scRealmsTable[i]); + TYPE_UNSET_ZLIB(temp); + ServerRealm_set_realmType(scRealmsTable[i], temp); + } + /* using user's baseport value*/ + if (ServerRealm_get_basePortOn(scRealmsTable[i]) == 0) { + ServerRealm_set_basePortOn(scRealmsTable[i], baseport); + } + /* using user's audit value*/ + if (ServerRealm_get_auditOn(scRealmsTable[i]) == 0) { + ServerRealm_set_auditOn(scRealmsTable[i], audit); + } +#ifdef HAVE_LIBPTHREAD + /* using user's tunneltype value*/ + if (ServerRealm_get_tunnelType(scRealmsTable[i]) == 0) { + if (tunneltype == -1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Conflicting types of tunnel type... exiting"); + exit(1); + } + ServerRealm_set_tunnelType(scRealmsTable[i], tunneltype); + } +#endif + /* using user's dnslookups value*/ + if (ServerRealm_get_dnsLookupsOn(scRealmsTable[i]) == 0) { + ServerRealm_set_dnsLookupsOn(scRealmsTable[i], dnslookups); + } + /* checking users amount */ + stemp = ServerRealm_get_sUsersLimit(scRealmsTable[i]); + set_value(&stemp, amount, "5"); + ServerRealm_set_sUsersLimit(scRealmsTable[i], stemp); + ServerRealm_set_usersLimit(scRealmsTable[i], + check_value(ServerRealm_get_sUsersLimit(scRealmsTable[i]), "Invalid users amount")); + /* checking clients amount */ + stemp = ServerRealm_get_sClientsLimit(scRealmsTable[i]); + set_value(&stemp, clients, "1"); + ServerRealm_set_sClientsLimit(scRealmsTable[i], stemp); + ServerRealm_set_clientsLimit(scRealmsTable[i], + check_value(ServerRealm_get_sClientsLimit(scRealmsTable[i]), "Invalid clients amount")); + /* checking raclients amount */ + stemp = ServerRealm_get_sRaClientsLimit(scRealmsTable[i]); + set_value(&stemp, raclients, "1"); + ServerRealm_set_sRaClientsLimit(scRealmsTable[i], stemp); + ServerRealm_set_raClientsLimit(scRealmsTable[i], + check_value(ServerRealm_get_sRaClientsLimit(scRealmsTable[i]), "Invalid raclients amount")); + /* checking usrpcli value */ + stemp = ServerRealm_get_sUsersPerClient(scRealmsTable[i]); + set_value(&stemp, usrpcli, ServerRealm_get_sUsersLimit(scRealmsTable[i])); + ServerRealm_set_sUsersPerClient(scRealmsTable[i], stemp); + ServerRealm_set_usersPerClient(scRealmsTable[i], + check_value(ServerRealm_get_sUsersPerClient(scRealmsTable[i]), "Invalid usrpcli value")); + /* checking timeout value */ + stemp = ServerRealm_get_sTimeout(scRealmsTable[i]); + set_value(&stemp, timeout, "5"); + ServerRealm_set_sTimeout(scRealmsTable[i], stemp); + ServerRealm_set_timeout(scRealmsTable[i], + check_value(ServerRealm_get_sTimeout(scRealmsTable[i]), "Invalid timeout value")); + /* checking maxidle value */ + stemp = ServerRealm_get_sMaxIdle(scRealmsTable[i]); + set_value(&stemp, maxidle, "0"); + ServerRealm_set_sMaxIdle(scRealmsTable[i], stemp); + temp = check_value_liberal(ServerRealm_get_sMaxIdle(scRealmsTable[i]), "Invalid maxidle value"); + if (temp < 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Invalid maxidle value: %d\n", temp); + exit(1); + } + ServerRealm_set_maxIdle(scRealmsTable[i], temp); + /* checking climode value */ + stemp = ServerRealm_get_sClientMode(scRealmsTable[i]); + set_value(&stemp, clim, "1"); + ServerRealm_set_sClientMode(scRealmsTable[i], stemp); + ServerRealm_set_clientMode(scRealmsTable[i], + check_value(ServerRealm_get_sClientMode(scRealmsTable[i]), "Invalid climode value")); + /* allocating memory*/ + srUsersTable = calloc(ServerRealm_get_usersLimit(scRealmsTable[i]), sizeof(ConnectUser*)); + if (srUsersTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of users"); + exit(1); + } + ServerRealm_set_usersTable(scRealmsTable[i], srUsersTable); + for (j = 0; j < ServerRealm_get_usersLimit(scRealmsTable[i]); ++j) { + srUsersTable[j] = ConnectUser_new(); + if (srUsersTable[j] == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of users"); + exit(1); + } + } + srClientsTable = calloc(ServerRealm_get_clientsLimit(scRealmsTable[i]), sizeof(ConnectClient*)); + if (srClientsTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of clients"); + exit(1); + } + ServerRealm_set_clientsTable(scRealmsTable[i], srClientsTable); + for (j = 0; j < ServerRealm_get_clientsLimit(scRealmsTable[i]); ++j) { + srClientsTable[j] = ConnectClient_new(); + if (srClientsTable[j] == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of clients"); + exit(1); + } + } + srRaClientsTable = calloc(ServerRealm_get_raClientsLimit(scRealmsTable[i]), sizeof(ConnectClient*)); + if (srRaClientsTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of raclients"); + exit(1); + } + ServerRealm_set_raClientsTable(scRealmsTable[i], srRaClientsTable); + for (j = 0; j < ServerRealm_get_raClientsLimit(scRealmsTable[i]); ++j) { + srRaClientsTable[j] = ConnectClient_new(); + if (srRaClientsTable[j] == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of raclients"); + exit(1); + } + } + ipfam = 0x01; +#ifdef AF_INET6 + if (TYPE_IS_IPV4(ServerRealm_get_realmType(scRealmsTable[i]))) { + ipfam |= 0x02; + } + else if (TYPE_IS_IPV6(ServerRealm_get_realmType(scRealmsTable[i]))) { + ipfam |= 0x04; + } +#endif + if (ServerRealm_get_basePortOn(scRealmsTable[i]) == 0) { + for (j = 0; j < ServerRealm_get_userClientPairs(scRealmsTable[i]); ++j) { + if (ip_listen(&temp, UsrCli_get_listenHostName(srUsersClientsTable[j]) ? + UsrCli_get_listenHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_listenPortName(srUsersClientsTable[j]), + (&len), ipfam)) { + aflog(LOG_T_INIT, LOG_I_CRIT, +#ifdef AF_INET6 + "tcp_listen_%s error for %s, %s", + (ipfam & 0x02)?"ipv4":(ipfam & 0x04)?"ipv6":"unspec", +#else + "tcp_listen error for %s, %s", +#endif + UsrCli_get_listenHostName(srUsersClientsTable[j]) ? + UsrCli_get_listenHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_listenPortName(srUsersClientsTable[j])); + exit(1); + } + ServerRealm_set_addressLength(scRealmsTable[i], len); + UsrCli_set_listenFd(srUsersClientsTable[j], temp); + flags = fcntl(UsrCli_get_listenFd(srUsersClientsTable[j]), F_GETFL, 0); + fcntl(UsrCli_get_listenFd(srUsersClientsTable[j]), F_SETFL, flags | O_NONBLOCK); + } + } + + for (j = 0; j < ServerRealm_get_userClientPairs(scRealmsTable[i]); ++j) { + switch (ServerRealm_get_tunnelType(scRealmsTable[i])) { + case 0: { + temp = find_previousFd(srUsersClientsTable, j, + UsrCli_get_manageHostName(srUsersClientsTable[j]), + UsrCli_get_managePortName(srUsersClientsTable[j])); + if (temp == -1) { + if (ip_listen(&temp, UsrCli_get_manageHostName(srUsersClientsTable[j]) ? + UsrCli_get_manageHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_managePortName(srUsersClientsTable[j]), + (&len), ipfam)) { + aflog(LOG_T_INIT, LOG_I_CRIT, +#ifdef AF_INET6 + "tcp_listen_%s error for %s, %s", + (ipfam & 0x02)?"ipv4":(ipfam & 0x04)?"ipv6":"unspec", +#else + "tcp_listen error for %s, %s", +#endif + UsrCli_get_manageHostName(srUsersClientsTable[j]) ? + UsrCli_get_manageHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_managePortName(srUsersClientsTable[j])); + exit(1); + } + } + ServerRealm_set_addressLength(scRealmsTable[i], len); + UsrCli_set_manageFd(srUsersClientsTable[j], temp); + flags = fcntl(UsrCli_get_manageFd(srUsersClientsTable[j]), F_GETFL, 0); + fcntl(UsrCli_get_manageFd(srUsersClientsTable[j]), F_SETFL, flags | O_NONBLOCK); + UsrCli_set_number(srUsersClientsTable[j], eval_UsrCliPair(srUsersClientsTable, j, + UsrCli_get_manageHostName(srUsersClientsTable[j]), + UsrCli_get_managePortName(srUsersClientsTable[j]))); + break; + } +#ifdef HAVE_LIBPTHREAD + case 1: + case 2: { + temp = find_previousFd(srUsersClientsTable, j, + UsrCli_get_manageHostName(srUsersClientsTable[j]), + UsrCli_get_managePortName(srUsersClientsTable[j])); + if (temp == -1) { + if (initialize_http_proxy_server(&temp, + UsrCli_get_manageHostName(srUsersClientsTable[j]) ? + UsrCli_get_manageHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_managePortName(srUsersClientsTable[j]), + (&len), ipfam, + ServerRealm_get_clientsLimit(scRealmsTable[i]) + + ServerRealm_get_raClientsLimit(scRealmsTable[i]), + (ServerRealm_get_tunnelType(scRealmsTable[i]) - 1), + ctx)) { + aflog(LOG_T_INIT, LOG_I_CRIT, +#ifdef AF_INET6 + "http%s_proxy_listen_%s error for %s, %s", + (ServerRealm_get_tunnelType(scRealmsTable[i]) == 2) ? "s" : "", + (ipfam & 0x02)?"ipv4":(ipfam & 0x04)?"ipv6":"unspec", +#else + "http%s_proxy_listen error for %s, %s", + (ServerRealm_get_tunnelType(scRealmsTable[i]) == 2) ? "s" : "", +#endif + UsrCli_get_manageHostName(srUsersClientsTable[j]) ? + UsrCli_get_manageHostName(srUsersClientsTable[j]) : + ServerRealm_get_hostName(scRealmsTable[i]), + UsrCli_get_managePortName(srUsersClientsTable[j])); + exit(1); + } + } + ServerRealm_set_addressLength(scRealmsTable[i], len); + UsrCli_set_manageFd(srUsersClientsTable[j], temp); + flags = fcntl(UsrCli_get_manageFd(srUsersClientsTable[j]), F_GETFL, 0); + fcntl(UsrCli_get_manageFd(srUsersClientsTable[j]), F_SETFL, flags | O_NONBLOCK); + UsrCli_set_number(srUsersClientsTable[j], eval_UsrCliPair(srUsersClientsTable, j, + UsrCli_get_manageHostName(srUsersClientsTable[j]), + UsrCli_get_managePortName(srUsersClientsTable[j]))); + break; + } +#endif + default: { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Unknown tunnel type"); + exit(1); + break; + } + } + } + + ServerRealm_set_clientAddress(scRealmsTable[i], malloc(ServerRealm_get_addressLength(scRealmsTable[i]))); + if (ServerRealm_get_clientAddress(scRealmsTable[i]) == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Allocating memory for client addresses failed... exiting"); + exit(1); + } + + for (j = 0; j < ServerRealm_get_clientsLimit(scRealmsTable[i]); ++j) { + SslFd_set_ssl(ConnectClient_get_sslFd(srClientsTable[j]), SSL_new(ctx)); + if (SslFd_get_ssl(ConnectClient_get_sslFd(srClientsTable[j])) == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Creation of ssl object failed... exiting"); + exit(1); + } + } + + for (j = 0; j < ServerRealm_get_raClientsLimit(scRealmsTable[i]); ++j) { + SslFd_set_ssl(ConnectClient_get_sslFd(srRaClientsTable[j]), SSL_new(ctx)); + if (SslFd_get_ssl(ConnectClient_get_sslFd(srRaClientsTable[j])) == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Creation of ssl object failed... exiting"); + exit(1); + } + } + + for (j = 0; j < ServerRealm_get_userClientPairs(scRealmsTable[i]); ++j) { + FD_SET(UsrCli_get_manageFd(srUsersClientsTable[j]), &allset); + maxfdp1 = (maxfdp1 > (UsrCli_get_manageFd(srUsersClientsTable[j]) + 1)) ? + maxfdp1 : (UsrCli_get_manageFd(srUsersClientsTable[j]) + 1); + } + if (ServerRealm_get_basePortOn(scRealmsTable[i]) == 0) { + for (j = 0; j < ServerRealm_get_userClientPairs(scRealmsTable[i]); ++j) { + FD_SET(UsrCli_get_listenFd(srUsersClientsTable[j]), &allset); + maxfdp1 = (maxfdp1 > (UsrCli_get_listenFd(srUsersClientsTable[j]) + 1)) ? + maxfdp1 : (UsrCli_get_listenFd(srUsersClientsTable[j]) + 1); + } + } + ServerRealm_set_connectedUsers(scRealmsTable[i], 0); + ServerRealm_set_connectedClients(scRealmsTable[i], 0); + ServerRealm_set_connectedRaClients(scRealmsTable[i], 0); + for (j = 0; j < ServerRealm_get_clientsLimit(scRealmsTable[i]); ++j) { + ConnectClient_set_timer(srClientsTable[j], timeval_create(ServerRealm_get_timeout(scRealmsTable[i]), 0)); + ConnectClient_set_limit(srClientsTable[j], ServerRealm_get_usersPerClient(scRealmsTable[i])); + if (ConnectClient_create_users(srClientsTable[j])) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - try define smaller amount of usrpcli (or users)"); + exit(1); + } + } + for (j = 0; j < ServerRealm_get_raClientsLimit(scRealmsTable[i]); ++j) { + ConnectClient_set_timer(srRaClientsTable[j], + timeval_create(ServerRealm_get_timeout(scRealmsTable[i]), 0)); + } + } + + aflog(LOG_T_MAIN, LOG_I_INFO, + "SERVER STARTED realms: %d", ServerConfiguration_get_realmsNumber(config)); + time(&now); + ServerConfiguration_set_startTime(config, now); + + for ( ; ; ) { + rset = allset; + tmpset = wset; + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "select, maxfdp1: %d", maxfdp1); + if (TaskScheduler_hasMoreTasks(scheduler)) { + TaskScheduler_startWatching(scheduler); + select(maxfdp1, &rset, &tmpset, NULL, TaskScheduler_get_actualTimer(scheduler)); + TaskScheduler_stopWatching(scheduler); + } + else { + select(maxfdp1, &rset, &tmpset, NULL, NULL); + } + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "after select..."); + + for (j = 0; j < ServerConfiguration_get_realmsNumber(config); ++j) { + pointer = scRealmsTable[j]; + srUsersTable = ServerRealm_get_usersTable(pointer); + srClientsTable = ServerRealm_get_clientsTable(pointer); + srRaClientsTable = ServerRealm_get_raClientsTable(pointer); + srUsersClientsTable = ServerRealm_get_usersClientsTable(pointer); + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + if ((ConnectUser_get_state(srUsersTable[i]) == S_STATE_OPEN) || + (ConnectUser_get_state(srUsersTable[i]) == S_STATE_STOPPED) || + (ConnectUser_get_state(srUsersTable[i]) == S_STATE_KICKING)) { + if (FD_ISSET(ConnectUser_get_connFd(srUsersTable[i]), &rset)) { + k = eval_usernum(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])], i); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: user[%d]: FD_ISSET", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer,i)); + if (TYPE_IS_TCP(ServerRealm_get_realmType(pointer))) { /* forwarding tcp packets */ + n = read(ConnectUser_get_connFd(srUsersTable[i]), &buff[5], 8091); + if (n == -1) { + if (errno == EAGAIN) { + continue; + } + aflog(LOG_T_USER, LOG_I_ERR, + "realm[%s]: Client[%s]: user[%d]: READ ERROR (%d)", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), errno); + n = 0; + } + if (n) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "realm[%s]: Client[%s]: FROM user[%d]: MESSAGE length=%d", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), n); + UserStats_add_upload(ConnectUser_get_stats(srUsersTable[i]), n); + if ((buff[5] == AF_S_MESSAGE) && (buff[6] == AF_S_LOGIN) && (buff[7] == AF_S_MESSAGE)) { + aflog(LOG_T_USER, LOG_I_WARNING, + "WARNING: got packet similiar to udp"); + } + buff[0] = AF_S_MESSAGE; /* sending message */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, n+5); + } + else { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: user[%d]: CLOSED", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s CLIENT: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[i]))); + if (ServerRealm_get_auditOn(pointer)) { + AuditList_insert_back( + ConnectClient_get_auditList( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + AuditListNode_new_entry( + get_username(pointer, i), + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), + ConnectUser_get_connectTime(srUsersTable[i]), + now - ConnectUser_get_connectTime(srUsersTable[i])) + ); + } + close(ConnectUser_get_connFd(srUsersTable[i])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &wset); + if (ConnectUser_get_state(srUsersTable[i]) == S_STATE_KICKING) { + ConnectUser_set_state(srUsersTable[i], S_STATE_CLEAR); + ServerRealm_decrease_connectedUsers(pointer); + ConnectClient_decrease_connected(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]); + ConnectClient_get_users(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])])[k] = -1; + } + else { + ConnectUser_set_state(srUsersTable[i], S_STATE_CLOSING); + } + BufList_clear(ConnectUser_get_bufList(srUsersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, 5); + } + } + else { /* when forwarding udp packets */ + n = readn(ConnectUser_get_connFd(srUsersTable[i]), buff, 5 ); + if (n != 5) { + n = 0; + } + if (n) { + if ((buff[0] == AF_S_MESSAGE) && (buff[1] == AF_S_LOGIN) && (buff[2] == AF_S_MESSAGE)) { + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + if ((n = readn(ConnectUser_get_connFd(srUsersTable[i]), &buff[5], length)) != 0) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "realm[%s]: Client[%s]: FROM user[%d]: MESSAGE length=%d", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), n); + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, n+5); + } + } + else { + n = 0; + } + } + + if (n == 0) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: user[%d]: CLOSED (udp mode)", get_realmname(config, j), + get_clientname(pointer, + ConnectUser_get_whatClient(srUsersTable[i])), get_username(pointer, i)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s CLIENT: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[i]))); + close(ConnectUser_get_connFd(srUsersTable[i])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &wset); + ConnectUser_set_state(srUsersTable[i], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(srUsersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, 5); + } + + } + } + } + } + /* ------------------------------------ */ + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + if ((ConnectUser_get_state(srUsersTable[i]) == S_STATE_STOPPED) || + (ConnectUser_get_state(srUsersTable[i]) == S_STATE_KICKING)) + if (FD_ISSET(ConnectUser_get_connFd(srUsersTable[i]), &tmpset)) { + k = eval_usernum(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])], i); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: user[%d]: FD_ISSET - WRITE", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + n = BufListNode_readMessageLength(BufList_get_first(ConnectUser_get_bufList(srUsersTable[i]))); + sent = write(ConnectUser_get_connFd(srUsersTable[i]), + BufListNode_readMessage(BufList_get_first(ConnectUser_get_bufList(srUsersTable[i]))), n); + if ((sent > 0) && (sent != n)) { + BufListNode_set_actPtr(BufList_get_first(ConnectUser_get_bufList(srUsersTable[i])), + BufListNode_get_actPtr(BufList_get_first(ConnectUser_get_bufList(srUsersTable[i]))) + sent); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: user[%d]: (%d/%d)", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), sent, n); + } + else if ((sent == -1) && (errno == EAGAIN)) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: user[%d]: EAGAIN", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + } + else if (sent == -1) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: user[%d]: CLOSED", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s CLIENT: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[i]))); + close(ConnectUser_get_connFd(srUsersTable[i])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &wset); + if (ConnectUser_get_state(srUsersTable[i]) == S_STATE_KICKING) { + ConnectUser_set_state(srUsersTable[i], S_STATE_CLEAR); + ServerRealm_decrease_connectedUsers(pointer); + ConnectClient_decrease_connected(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]); + ConnectClient_get_users(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])])[k] = -1; + } + else { + ConnectUser_set_state(srUsersTable[i], S_STATE_CLOSING); + } + BufList_clear(ConnectUser_get_bufList(srUsersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, 5); + } + else { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: user[%d]: (%d/%d)", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), sent, n); + BufList_delete_first(ConnectUser_get_bufList(srUsersTable[i])); + if (BufList_get_first(ConnectUser_get_bufList(srUsersTable[i])) == NULL) { + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &wset); + buff[0] = AF_S_CAN_SEND; /* stopping transfer */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: TO user[%d]: BUFFERING MESSAGE ENDED", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, 5); + if (ConnectUser_get_state(srUsersTable[i]) == S_STATE_KICKING) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: user[%d]: delayed CLOSED", get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s CLIENT: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(pointer, ConnectUser_get_whatClient(srUsersTable[i])), + get_username(pointer, i), + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[i]))); + close(ConnectUser_get_connFd(srUsersTable[i])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[i]), &wset); + ConnectUser_set_state(srUsersTable[i], S_STATE_CLEAR); + ServerRealm_decrease_connectedUsers(pointer); + ConnectClient_decrease_connected(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]); + ConnectClient_get_users(srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])])[k] = -1; + BufList_clear(ConnectUser_get_bufList(srUsersTable[i])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = k >> 8; /* high bits of user number */ + buff[2] = k; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[ConnectUser_get_whatClient(srUsersTable[i])]), + buff, 5); + } + else { + ConnectUser_set_state(srUsersTable[i], S_STATE_OPEN); + } + } + } + } + } + /* ------------------------------------ */ + if (ServerRealm_get_basePortOn(pointer) == 0) { + for (l = 0; l < ServerRealm_get_userClientPairs(pointer); ++l) { + if (FD_ISSET(UsrCli_get_listenFd(srUsersClientsTable[l]), &rset)) { + len = ServerRealm_get_addressLength(pointer); + sent = accept(UsrCli_get_listenFd(srUsersClientsTable[l]), ServerRealm_get_clientAddress(pointer), &len); + if (sent == -1) { + if (errno == EAGAIN) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: listenfd: FD_ISSET --> EAGAIN", get_realmname(config, j)); + } + else { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: listenfd: FD_ISSET --> errno=%d", get_realmname(config, j), errno); + } + continue; + } + flags = fcntl(sent, F_GETFL, 0); + fcntl(sent, F_SETFL, flags | O_NONBLOCK); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: listenfd: FD_ISSET", get_realmname(config, j)); + k = find_client(pointer, ServerRealm_get_clientMode(pointer), l); + + if (ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_ACCEPTED) { + if (ServerRealm_get_connectedUsers(pointer) == ServerRealm_get_usersLimit(pointer)) { + close(sent); + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: user limit EXCEEDED", get_realmname(config, j)); + } + else if (ConnectClient_get_connected(srClientsTable[k]) == + ConnectClient_get_limit(srClientsTable[k])) { + close(sent); + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: Client[%s]: usrpcli limit EXCEEDED", + get_realmname(config, j), get_clientname(pointer, k)); + } + else { + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + if (ConnectUser_get_state(srUsersTable[i]) == S_STATE_CLEAR) { + ConnectUser_set_userId(srUsersTable[i], ServerRealm_get_usersCounter(pointer)); + ServerRealm_increase_usersCounter(pointer); + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: new user: CONNECTING from IP: %s", + get_realmname(config, j), get_clientname(pointer, k), + sock_ntop(ServerRealm_get_clientAddress(pointer), len, ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), ServerRealm_get_dnsLookupsOn(pointer))); + ConnectUser_set_connFd(srUsersTable[i], sent); + ConnectUser_set_state(srUsersTable[i], S_STATE_OPENING); + ConnectUser_set_whatClient(srUsersTable[i], k); + time(&now); + ConnectUser_set_connectTime(srUsersTable[i], now); + UserStats_clear(ConnectUser_get_stats(srUsersTable[i])); + UserStats_set_lastActivity(ConnectUser_get_stats(srUsersTable[i]), now); + ServerRealm_increase_connectedUsers(pointer); + ConnectClient_increase_connected(srClientsTable[k]); + memcpy(&buff[5], ConnectUser_get_nameBuf(srUsersTable[i]), 128); + memcpy(&buff[133], ConnectUser_get_portBuf(srUsersTable[i]), 7); + n = 135; + if (ConnectClient_get_multi(srClientsTable[k]) == CONNECTCLIENT_MULTI_ENABLED) { + n = 136; + buff[140] = UsrCli_get_number(srUsersClientsTable[l]); + } + i = find_usernum(srClientsTable[k], i); + buff[0] = AF_S_CONOPEN; /* opening connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, n+5); + break; + } + } + } + } + else { + close(sent); + aflog(LOG_T_USER, LOG_I_ERR, + "realm[%s]: Client(%d) is NOT CONNECTED", + get_realmname(config, j), k); + } + } + } + } + /* ------------------------------------ */ + if (ServerRealm_get_basePortOn(pointer) == 1) { + for (k = 0; k < ServerRealm_get_clientsLimit(pointer); ++k) { + if (ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_ACCEPTED) { + if (FD_ISSET(ConnectClient_get_listenFd(srClientsTable[k]), &rset)) { + + len = ServerRealm_get_addressLength(pointer); + sent = accept(ConnectClient_get_listenFd(srClientsTable[k]), ServerRealm_get_clientAddress(pointer), &len); + if (sent == -1) { + if (errno == EAGAIN) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: listenfd: FD_ISSET --> EAGAIN", get_realmname(config, j)); + } + else { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: listenfd: FD_ISSET --> errno=%d", get_realmname(config, j), errno); + } + continue; + } + flags = fcntl(sent, F_GETFL, 0); + fcntl(sent, F_SETFL, flags | O_NONBLOCK); + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: listenfd: FD_ISSET", + get_realmname(config, j), get_clientname(pointer, k)); + if (ServerRealm_get_connectedUsers(pointer) == ServerRealm_get_usersLimit(pointer)) { + close(sent); + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: user limit EXCEEDED", get_realmname(config, j)); + } + else if(ConnectClient_get_connected(srClientsTable[k]) == + ConnectClient_get_limit(srClientsTable[k])) { + close(sent); + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: Client[%s]: usrpcli limit EXCEEDED", + get_realmname(config, j), get_clientname(pointer, k)); + } + else { + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + if (ConnectUser_get_state(srUsersTable[i]) == S_STATE_CLEAR) { + ConnectUser_set_userId(srUsersTable[i], ServerRealm_get_usersCounter(pointer)); + ServerRealm_increase_usersCounter(pointer); + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: Client[%s]: new user: CONNECTING from IP: %s", + get_realmname(config, j), get_clientname(pointer, k), + sock_ntop(ServerRealm_get_clientAddress(pointer), len, + ConnectUser_get_nameBuf(srUsersTable[i]), + ConnectUser_get_portBuf(srUsersTable[i]), ServerRealm_get_dnsLookupsOn(pointer))); + ConnectUser_set_connFd(srUsersTable[i], sent); + ConnectUser_set_state(srUsersTable[i], S_STATE_OPENING); + ConnectUser_set_whatClient(srUsersTable[i], k); + time(&now); + ConnectUser_set_connectTime(srUsersTable[i], now); + UserStats_clear(ConnectUser_get_stats(srUsersTable[i])); + UserStats_set_lastActivity(ConnectUser_get_stats(srUsersTable[i]), now); + ServerRealm_increase_connectedUsers(pointer); + ConnectClient_increase_connected(srClientsTable[k]); + memcpy(&buff[5], ConnectUser_get_nameBuf(srUsersTable[i]), 128); + memcpy(&buff[133], ConnectUser_get_portBuf(srUsersTable[i]), 7); + n = 135; + i = find_usernum(srClientsTable[k], i); + buff[0] = AF_S_CONOPEN; /* opening connection */ + buff[1] = i >> 8; /* high bits of user number */ + buff[2] = i; /* low bits of user number */ + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, n+5); + break; + } + } + } + } + } + } + } + /* ------------------------------------ */ + for (k = 0; k < ServerRealm_get_clientsLimit(pointer); ++k) + if ((ConnectClient_get_state(srClientsTable[k]) > CONNECTCLIENT_STATE_FREE) && + (FD_ISSET(SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k])), &rset))) { + if (ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_CONNECTING) { + make_ssl_initialize(ConnectClient_get_sslFd(srClientsTable[k])); + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: new Client[%s]: SSL_accept", + get_realmname(config, j), get_clientname(pointer, k)); + switch (make_ssl_accept(ConnectClient_get_sslFd(srClientsTable[k]))) { + case 2: { + close(SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k]))); + FD_CLR(SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k])), &allset); + + /* This SSL-object is busted; don't reuse it + (SSL_clear isn't sufficient because ssl->new_session is set): */ + SslFd_set_ssl(ConnectClient_get_sslFd(srClientsTable[k]), + SSL_new (ctx)); + + ConnectClient_set_state(srClientsTable[k], CONNECTCLIENT_STATE_FREE); + if ((task = ConnectClient_get_task(srClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srClientsTable[k], NULL); + } + ServerRealm_decrease_connectedClients(pointer); + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: new Client[%s]: DENIED by SSL_accept", + get_realmname(config, j), get_clientname(pointer, k)); + } + case 1: { + continue; + } + default: { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "realm[%s]: new Client[%s]: ACCEPTED by SSL_accept", + get_realmname(config, j), get_clientname(pointer, k)); + ConnectClient_set_state(srClientsTable[k], CONNECTCLIENT_STATE_AUTHORIZING); + continue; + } + } + } + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: commfd: FD_ISSET", + get_realmname(config, j), get_clientname(pointer, k)); + if (ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_AUTHORIZING) { + n = SslFd_get_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd(srClientsTable[k]), + buff, (-1) * HeaderBuffer_to_read(ConnectClient_get_header(srClientsTable[k]))); + } + else { + n = SslFd_get_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd(srClientsTable[k]), + buff, (-1) * HeaderBuffer_to_read(ConnectClient_get_header(srClientsTable[k]))); + } + if (n == -1) { + if (errno == EAGAIN) { + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: Client[%s]: commfd: EAGAIN", + get_realmname(config, j), get_clientname(pointer, k)); + continue; + } + else { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: Client[%s]: commfd: ERROR: %d", + get_realmname(config, j), get_clientname(pointer, k), errno); + n = 0; + } + } + else if (n != 5) { + if (n != 0) { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "realm[%s]: Client[%s]: header length = %d --> buffering", + get_realmname(config, j), get_clientname(pointer, k), n); + HeaderBuffer_store(ConnectClient_get_header(srClientsTable[k]), buff, n); + if (HeaderBuffer_to_read(ConnectClient_get_header(srClientsTable[k])) == 0) { + HeaderBuffer_restore(ConnectClient_get_header(srClientsTable[k]), buff); + n = 5; + } + else { + continue; + } + } + } + if (n==0) { + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: commfd: CLOSED", + get_realmname(config, j), get_clientname(pointer, k)); + time(&now); + aflog(LOG_T_CLIENT, LOG_I_NOTICE, + "REALM: %s CLIENT: %s IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(pointer, k), + ConnectClient_get_nameBuf(srClientsTable[k]), + ConnectClient_get_portBuf(srClientsTable[k]), + timeperiod(now - ConnectClient_get_connectTime(srClientsTable[k]))); + if (ServerRealm_get_auditOn(pointer)) { + while (AuditList_get_first(ConnectClient_get_auditList(srClientsTable[k]))) { + aflog(LOG_T_CLIENT, LOG_I_NOTICE, + "USERID: %d IP: %s PORT: %s CONNECTED: %s DURATION: %s", + AuditListNode_get_userId( + AuditList_get_first( + ConnectClient_get_auditList(srClientsTable[k]))), + AuditListNode_get_nameBuf( + AuditList_get_first( + ConnectClient_get_auditList(srClientsTable[k]))), + AuditListNode_get_portBuf( + AuditList_get_first( + ConnectClient_get_auditList(srClientsTable[k]))), + localdate(AuditListNode_get_connectTimep( + AuditList_get_first( + ConnectClient_get_auditList(srClientsTable[k])))), + timeperiod(AuditListNode_get_duration( + AuditList_get_first( + ConnectClient_get_auditList(srClientsTable[k]))))); + AuditList_delete_first(ConnectClient_get_auditList(srClientsTable[k])); + } + } + remove_client(pointer, k, &allset, &wset, scheduler); + continue; + } + + numofcon = buff[1]; + numofcon = numofcon << 8; + numofcon += buff[2]; /* this is id of user */ + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + + if ((k == ServerRealm_get_clientsLimit(pointer)) && (buff[0] != AF_S_LOGIN) && + (buff[0] != AF_S_ADMIN_LOGIN) && (buff[0] != AF_S_ADMIN_CMD)) { + buff[0] = AF_S_WRONG; + } + if (ConnectClient_get_state(srClientsTable[k]) < CONNECTCLIENT_STATE_AUTHORIZING) { + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "realm[%s]: Client[%s]: Impossible behaviour --> ignoring", + get_realmname(config, j), get_clientname(pointer, k)); + continue; + } + if ((ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_AUTHORIZING) && + (buff[0] != AF_S_LOGIN) && (buff[0] != AF_S_ADMIN_LOGIN)) { + buff[0] = AF_S_WRONG; + } + + time(&now); + ConnectClient_set_lastActivity(srClientsTable[k], now); + if (ServerRealm_get_maxIdle(pointer)) { + ConnectClient_set_timer(srClientsTable[k], timeval_create(ServerRealm_get_maxIdle(pointer), 0)); + TaskScheduler_update(scheduler); + } + + switch (buff[0]) { + case AF_S_CONCLOSED : { + n = numofcon; + numofcon = eval_numofcon(pointer, k, numofcon); + if ((numofcon>=0) && (numofcon<(ServerRealm_get_usersLimit(pointer))) && + (ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED)) { + if (ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_STOPPED) { + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_KICKING); + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: KICKING...", + get_realmname(config, j), get_username(pointer, numofcon)); + } + else { + ServerRealm_decrease_connectedUsers(pointer); + ConnectClient_decrease_connected(srClientsTable[k]); + ConnectClient_get_users(srClientsTable[k])[n] = -1; + if (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_CLOSING) { + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLEAR); + aflog(LOG_T_USER, LOG_I_DEBUG, + "realm[%s]: user[%d]: CLOSE CONFIRMED", + get_realmname(config, j), get_username(pointer, numofcon)); + } + else if (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_OPEN) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: KICKED", + get_realmname(config, j), get_username(pointer, numofcon)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_username(pointer, numofcon), + ConnectUser_get_nameBuf(srUsersTable[numofcon]), + ConnectUser_get_portBuf(srUsersTable[numofcon]), + timeperiod(now - + ConnectUser_get_connectTime(srUsersTable[numofcon]))); + close(ConnectUser_get_connFd(srUsersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &wset); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLEAR); + BufList_clear(ConnectUser_get_bufList(srUsersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = n >> 8; /* high bits of user number */ + buff[2] = n; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + } + } + else { + remove_client(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_CONOPEN : { + n = numofcon; + numofcon = eval_numofcon(pointer, k, numofcon); + if ((numofcon>=0) && (numofcon<(ServerRealm_get_usersLimit(pointer))) && + (ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED)) { + if (ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_OPENING) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: NEW", + get_realmname(config, j), get_username(pointer, numofcon)); + FD_SET(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + maxfdp1 = (maxfdp1 > (ConnectUser_get_connFd(srUsersTable[numofcon]) + 1)) ? + maxfdp1 : (ConnectUser_get_connFd(srUsersTable[numofcon]) + 1); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_OPEN); + } + if (ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_OPENING_CLOSED) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: delayed CLOSING", + get_realmname(config, j), get_username(pointer, numofcon)); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLOSING); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = n >> 8; /* high bits of user number */ + buff[2] = n; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + } + else { + remove_client(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_CANT_OPEN : { + n = numofcon; + numofcon = eval_numofcon(pointer, k, numofcon); + if ((numofcon>=0) && (numofcon<(ServerRealm_get_usersLimit(pointer))) && + (ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED)) { + if ((ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_OPENING) || + (ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_OPENING_CLOSED)) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: DROPPED", + get_realmname(config, j), get_username(pointer, numofcon)); + ServerRealm_decrease_connectedUsers(pointer); + ConnectClient_decrease_connected(srClientsTable[k]); + ConnectClient_get_users(srClientsTable[k])[n] = -1; + if (ConnectUser_get_state(srUsersTable[numofcon]) == + S_STATE_OPENING) { + close(ConnectUser_get_connFd(srUsersTable[numofcon])); + } + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLEAR); + } + } + else { + remove_client(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_MESSAGE : { + if (ConnectClient_get_state(srClientsTable[k]) != + CONNECTCLIENT_STATE_ACCEPTED) { + remove_client(pointer, k, &allset, &wset, scheduler); + break; + } + if (TYPE_IS_UDP(ServerRealm_get_realmType(pointer))) { /* udp */ + n = SslFd_get_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + &buff[5], length); + } + else { + n = SslFd_get_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, length); + } + temp = numofcon; + numofcon = eval_numofcon(pointer, k, numofcon); + if ((numofcon>=0) && (numofcon<(ServerRealm_get_usersLimit(pointer)))) { + if (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_OPEN) { + aflog(LOG_T_USER, LOG_I_DEBUG, + "realm[%s]: TO user[%d]: MESSAGE length=%d", + get_realmname(config, j), get_username(pointer, numofcon), n); + UserStats_add_download(ConnectUser_get_stats(srUsersTable[numofcon]), n); + if (TYPE_IS_UDP(ServerRealm_get_realmType(pointer))) { /* udp */ + buff[1] = AF_S_LOGIN; + buff[2] = AF_S_MESSAGE; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + sent = write(ConnectUser_get_connFd(srUsersTable[numofcon]), buff, n+5); + if (sent == -1) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: CLOSED (write-udp)", + get_realmname(config, j), get_username(pointer, numofcon)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_username(pointer, numofcon), + ConnectUser_get_nameBuf(srUsersTable[numofcon]), + ConnectUser_get_portBuf(srUsersTable[numofcon]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[numofcon]))); + close(ConnectUser_get_connFd(srUsersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &wset); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(srUsersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = temp >> 8; /* high bits of user number */ + buff[2] = temp; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + } + else { /* tcp */ + sent = write(ConnectUser_get_connFd(srUsersTable[numofcon]), buff, n); + if ((sent > 0) && (sent != n)) { + BufList_insert_back(ConnectUser_get_bufList(srUsersTable[numofcon]), + BufListNode_new_message(sent, n, buff)); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_STOPPED); + FD_SET(ConnectUser_get_connFd(srUsersTable[numofcon]), &wset); + buff[0] = AF_S_DONT_SEND; /* stopping transfer */ + buff[1] = temp >> 8; /* high bits of user number */ + buff[2] = temp; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: TO user[%d]: BUFFERING MESSAGE STARTED (%d/%d)", + get_realmname(config, j), get_username(pointer, numofcon), sent, n); + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + else if ((sent == -1) && (errno == EAGAIN)) { + BufList_insert_back(ConnectUser_get_bufList(srUsersTable[numofcon]), + BufListNode_new_message(0, n, buff)); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_STOPPED); + FD_SET(ConnectUser_get_connFd(srUsersTable[numofcon]), &wset); + buff[0] = AF_S_DONT_SEND; /* stopping transfer */ + buff[1] = temp >> 8; /* high bits of user number */ + buff[2] = temp; /* low bits of user number */ + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: TO user[%d]: BUFFERING MESSAGE STARTED (%d/%d)", + get_realmname(config, j), get_username(pointer, numofcon), sent, n); + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + else if (sent == -1) { + aflog(LOG_T_USER, LOG_I_INFO, + "realm[%s]: user[%d]: CLOSED (write-tcp)", + get_realmname(config, j), get_username(pointer, numofcon)); + time(&now); + aflog(LOG_T_USER, LOG_I_NOTICE, + "REALM: %s USER: %d IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_username(pointer, numofcon), + ConnectUser_get_nameBuf(srUsersTable[numofcon]), + ConnectUser_get_portBuf(srUsersTable[numofcon]), + timeperiod(now - ConnectUser_get_connectTime(srUsersTable[numofcon]))); + close(ConnectUser_get_connFd(srUsersTable[numofcon])); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &wset); + ConnectUser_set_state(srUsersTable[numofcon], S_STATE_CLOSING); + BufList_clear(ConnectUser_get_bufList(srUsersTable[numofcon])); + buff[0] = AF_S_CONCLOSED; /* closing connection */ + buff[1] = temp >> 8; /* high bits of user number */ + buff[2] = temp; /* low bits of user number */ + SslFd_send_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + } + } + } + else if (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_STOPPED) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: TO user[%d]: BUFFERING MESSAGE (%d)", + get_realmname(config, j), get_username(pointer, numofcon), n); + if (TYPE_IS_UDP(ServerRealm_get_realmType(pointer))) { /* udp */ + buff[1] = AF_S_LOGIN; + buff[2] = AF_S_MESSAGE; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + BufList_insert_back(ConnectUser_get_bufList(srUsersTable[numofcon]), + BufListNode_new_message(0, n+5, buff)); + } + else { + BufList_insert_back(ConnectUser_get_bufList(srUsersTable[numofcon]), + BufListNode_new_message(0, n, buff)); + } + } + else if (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_CLOSING) { + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: TO user[%d]: IGNORED message length=%d", + get_realmname(config, j), get_username(pointer, numofcon), n); + } + else { + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: TO user[%d]: user in wrong state - IGNORED", + get_realmname(config, j), get_username(pointer, numofcon)); + } + } + else { + aflog(LOG_T_USER, LOG_I_WARNING, + "realm[%s]: message to non-existing user - IGNORED", + get_realmname(config, j)); + } + break; + } + case AF_S_LOGIN : { + if ((ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_AUTHORIZING) && + (numofcon==(ServerRealm_get_password(pointer)[0]*256+ServerRealm_get_password(pointer)[1])) && + (length==(ServerRealm_get_password(pointer)[2]*256+ServerRealm_get_password(pointer)[3]))) { + ConnectClient_set_multi(srClientsTable[k], CONNECTCLIENT_MULTI_DISABLED); + if (k != ServerRealm_get_clientsLimit(pointer)) { + ConnectClient_set_state(srClientsTable[k], CONNECTCLIENT_STATE_ACCEPTED); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: pass ok - ACCESS GRANTED", + get_realmname(config, j), get_clientname(pointer, k)); + buff[0] = AF_S_LOGIN; /* sending message */ + buff[1] = ConnectClient_get_limit( + srClientsTable[k]) >> 8;/* high bits of user number */ + buff[2] = ConnectClient_get_limit( + srClientsTable[k]); /* low bits of user number */ + buff[3] = ServerRealm_get_realmType(pointer); /* type of connection */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + if ((task = ConnectClient_get_task(srClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srClientsTable[k], NULL); + } + if (ServerRealm_get_maxIdle(pointer)) { + ConnectClient_set_timer(srClientsTable[k], + timeval_create(ServerRealm_get_maxIdle(pointer), 0)); + task = Task_new(ConnectClient_get_timerp(srClientsTable[k]), + RCTfunction, + RCTdata_new(config, j, k, 0, RCT_REASON_MAXIDLE, &allset, &wset), + RCTdata_free); + ConnectClient_set_task(srClientsTable[k], task); + TaskScheduler_addTask(scheduler, task); + } + if (ServerRealm_get_basePortOn(pointer) == 1) { + long tmp_val; + char tmp_tab[6]; + if (check_long( + UsrCli_get_listenPortName( + srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[k])]), + &tmp_val)) { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: INVALID listenport - removing Client[%s]", + get_realmname(config, j), get_clientname(pointer, k)); + remove_client(pointer, k, &allset, &wset, scheduler); + break; + } + tmp_val = tmp_val%65536; + memset(tmp_tab, 0, 6); + sprintf(tmp_tab, "%d", (int)tmp_val); + ipfam = 0x01; +#ifdef AF_INET6 + if (TYPE_IS_IPV4(ServerRealm_get_realmType(pointer))) { + ipfam |= 0x02; + } + else if (TYPE_IS_IPV6(ServerRealm_get_realmType(pointer))) { + ipfam |= 0x04; + } +#endif + while (ip_listen(ConnectClient_get_listenFdp(srClientsTable[k]), + UsrCli_get_listenHostName(srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[k])]) ? + UsrCli_get_listenHostName(srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[k])]) : + ServerRealm_get_hostName(pointer), + tmp_tab, (&len), ipfam)) { + tmp_val = (tmp_val+1)%65536; + memset(tmp_tab, 0, 6); + sprintf(tmp_tab, "%d", (int)tmp_val); + } + ServerRealm_set_addressLength(pointer, len); + FD_SET(ConnectClient_get_listenFd(srClientsTable[k]), &allset); + maxfdp1 = (maxfdp1>(ConnectClient_get_listenFd(srClientsTable[k])+1)) ? + maxfdp1 : (ConnectClient_get_listenFd(srClientsTable[k]) + 1); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: listenport=%s", + get_realmname(config, j), get_clientname(pointer, k), tmp_tab); + } + } + else { + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "realm[%s]: client limit EXCEEDED", get_realmname(config, j)); + buff[0] = AF_S_CANT_OPEN; /* sending message */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL, + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + remove_client(pointer, k, &allset, &wset, scheduler); + } + } + else if ((ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED) && (numofcon == 0)) { + n = SslFd_get_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, length); + buff[n] = 0; + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: ID received: %s", + get_realmname(config, j), get_clientname(pointer, k), buff); + ConnectClient_set_sClientId(srClientsTable[k], (char*) buff); + } + else { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: Client[%s]: Wrong password - CLOSING", + get_realmname(config, j), get_clientname(pointer, k)); + buff[0] = AF_S_WRONG; /* sending message */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL, + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + remove_client(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_DONT_SEND: { + if ((ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_OPEN) || + (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_STOPPED)) { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "realm[%s]: user[%d]: STOP READING", + get_realmname(config, j), get_username(pointer, numofcon)); + FD_CLR(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + } + else { + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: user[%d]: STOP READING - ignored", + get_realmname(config, j), get_username(pointer, numofcon)); + } + break; + } + case AF_S_CAN_SEND: { + if ((ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_OPEN) || + (ConnectUser_get_state(srUsersTable[numofcon]) == S_STATE_STOPPED)) { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "realm[%s]: user[%d]: START READING", + get_realmname(config, j), get_username(pointer, numofcon)); + FD_SET(ConnectUser_get_connFd(srUsersTable[numofcon]), &allset); + } + else { + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: user[%d]: START READING - ignored", + get_realmname(config, j), get_username(pointer, numofcon)); + } + break; + } + case AF_S_WRONG: { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: Client[%s]: Wrong message - CLOSING", + get_realmname(config, j), get_clientname(pointer, k)); + remove_client(pointer, k, &allset, &wset, scheduler); + break; + } + case AF_S_ADMIN_LOGIN: { + if ((ConnectClient_get_state(srClientsTable[k]) == + CONNECTCLIENT_STATE_AUTHORIZING) && + (numofcon == (ServerRealm_get_password(pointer)[0]*256 + ServerRealm_get_password(pointer)[1])) && + (length == (ServerRealm_get_password(pointer)[2]*256 + ServerRealm_get_password(pointer)[3]))) { + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: Client[%s]: NEW remote admin -- pass OK", + get_realmname(config, j), get_clientname(pointer, k)); + for (l = 0; l < ServerRealm_get_raClientsLimit(pointer); ++l) { + if (ConnectClient_get_state(srRaClientsTable[l]) == + CONNECTCLIENT_STATE_FREE) { + SslFd_set_fd( + ConnectClient_get_sslFd(srRaClientsTable[l]), + SslFd_get_fd( + ConnectClient_get_sslFd(srClientsTable[k]))); + ConnectClient_set_connectTime( + srRaClientsTable[l], + ConnectClient_get_connectTime(srClientsTable[k])); + ConnectClient_set_lastActivity( + srRaClientsTable[l], + ConnectClient_get_lastActivity(srClientsTable[k])); +#ifdef HAVE_LIBPTHREAD + ConnectClient_set_tunnelType( + srRaClientsTable[l], + ConnectClient_get_tunnelType(srClientsTable[k])); +#endif + ConnectClient_set_clientId( + srRaClientsTable[l], + ConnectClient_get_clientId(srClientsTable[k])); + ConnectClient_set_nameBuf( + srRaClientsTable[l], + ConnectClient_get_nameBuf(srClientsTable[k])); + ConnectClient_set_portBuf( + srRaClientsTable[l], + ConnectClient_get_portBuf(srClientsTable[k])); + tmp_ssl = SslFd_get_ssl( + ConnectClient_get_sslFd(srRaClientsTable[l])); + SslFd_set_ssl_nf( + ConnectClient_get_sslFd(srRaClientsTable[l]), + SslFd_get_ssl( + ConnectClient_get_sslFd(srClientsTable[k]))); + SslFd_set_ssl_nf( + ConnectClient_get_sslFd(srClientsTable[k]), + tmp_ssl); + ConnectClient_set_state( + srClientsTable[k], + CONNECTCLIENT_STATE_FREE); + break; + } + } + if (l != ServerRealm_get_raClientsLimit(pointer)) { + ConnectClient_set_state( + srRaClientsTable[l], + CONNECTCLIENT_STATE_ACCEPTED); + ServerRealm_increase_connectedRaClients(pointer); + if ((task = ConnectClient_get_task(srClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srClientsTable[k], NULL); + } + sprintf((char*) &buff[5], AF_VER("AFSERVER")); + n = strlen((char*) &buff[5]); + buff[0] = AF_S_ADMIN_LOGIN; /* sending message */ + buff[1] = ServerRealm_get_realmType(pointer); /* type of connection */ + buff[2] = AF_RA_UNDEFINED; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL, + ConnectClient_get_sslFd( + srRaClientsTable[l]), + buff, n+5); + } + else { + aflog(LOG_T_MANAGE, LOG_I_WARNING, + "realm[%s]: Client[%s]: remote admin -- limit EXCEEDED", + get_realmname(config, j), get_clientname(pointer, k)); + buff[0] = AF_S_CANT_OPEN; /* sending message */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srClientsTable[k]), + buff, 5); + remove_client(pointer, k, &allset, &wset, scheduler); + } + } + break; + } + case AF_S_KEEP_ALIVE: { + aflog(LOG_T_CLIENT, LOG_I_DEBUG, + "realm[%s]: Client[%s]: Keep alive packet", + get_realmname(config, j), get_clientname(pointer, k)); + break; + } + case AF_S_ENABLE_MULTI: { + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: MULTI enabled: %d", + get_realmname(config, j), get_clientname(pointer, k), buff[1]); + ConnectClient_set_multi(srClientsTable[k], CONNECTCLIENT_MULTI_ENABLED); + break; + } + default : { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: Client[%s]: Unrecognized message - CLOSING", + get_realmname(config, j), get_clientname(pointer, k)); + remove_client(pointer, k, &allset, &wset, scheduler); + } + } + } + /* ------------------------------------ */ + for (k = 0; k < ServerRealm_get_raClientsLimit(pointer); ++k) + if ((ConnectClient_get_state(srRaClientsTable[k]) > CONNECTCLIENT_STATE_FREE) && + (FD_ISSET(SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k])), &rset))) { + if (ConnectClient_get_state(srRaClientsTable[k]) == CONNECTCLIENT_STATE_CONNECTING) { + make_ssl_initialize(ConnectClient_get_sslFd(srRaClientsTable[k])); + aflog(LOG_T_MANAGE, LOG_I_DDEBUG, + "realm[%s]: new Client[%s] (ra): SSL_accept", + get_realmname(config, j), get_raclientname(pointer, k)); + switch (make_ssl_accept(ConnectClient_get_sslFd(srRaClientsTable[k]))) { + case 2: { + close (SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k]))); + FD_CLR(SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k])), &allset); + SSL_clear(SslFd_get_ssl(ConnectClient_get_sslFd(srRaClientsTable[k]))); + ConnectClient_set_state(srRaClientsTable[k], CONNECTCLIENT_STATE_FREE); + if ((task = ConnectClient_get_task(srRaClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srRaClientsTable[k], NULL); + } + ServerRealm_decrease_connectedClients(pointer); + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: new Client[%s] (ra): DENIED by SSL_accept", + get_realmname(config, j), get_raclientname(pointer, k)); + } + case 1: { + continue; + } + default: { + aflog(LOG_T_MANAGE, LOG_I_DEBUG, + "realm[%s]: new Client[%s] (ra): ACCEPTED by SSL_accept", + get_realmname(config, j), get_raclientname(pointer, k)); + ConnectClient_set_state(srRaClientsTable[k], CONNECTCLIENT_STATE_AUTHORIZING); + continue; + } + } + } + aflog(LOG_T_MANAGE, LOG_I_DDEBUG, + "realm[%s]: Client[%s] (ra): commfd: FD_ISSET", + get_realmname(config, j), get_raclientname(pointer, k)); + n = SslFd_get_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srRaClientsTable[k]), + buff, (-1) * HeaderBuffer_to_read(ConnectClient_get_header(srRaClientsTable[k]))); + if (n == -1) { + if (errno == EAGAIN) { + aflog(LOG_T_MANAGE, LOG_I_DDEBUG, + "realm[%s]: Client[%s] (ra): commfd: EAGAIN", + get_realmname(config, j), get_raclientname(pointer, k)); + continue; + } + else { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: Client[%s] (ra): commfd: ERROR: %d", + get_realmname(config, j), get_raclientname(pointer, k), errno); + n = 0; + } + } + else if (n != 5) { + if (n != 0) { + aflog(LOG_T_MANAGE, LOG_I_WARNING, + "realm[%s]: Client[%s] (ra): header length = %d --> buffering", + get_realmname(config, j), get_raclientname(pointer, k), n); + HeaderBuffer_store(ConnectClient_get_header(srRaClientsTable[k]), buff, n); + if (HeaderBuffer_to_read(ConnectClient_get_header(srRaClientsTable[k])) == 0) { + HeaderBuffer_restore(ConnectClient_get_header(srRaClientsTable[k]), buff); + n = 5; + } + else { + continue; + } + } + } + if (n==0) { + remove_raclient(pointer, k, &allset, &wset, scheduler); + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: Client[%s] (ra): commfd: CLOSED", + get_realmname(config, j), get_raclientname(pointer, k)); + continue; + } + + numofcon = buff[1]; + numofcon = numofcon << 8; + numofcon += buff[2]; /* this is id of user */ + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + + if (ConnectClient_get_state(srRaClientsTable[k]) < CONNECTCLIENT_STATE_AUTHORIZING) { + aflog(LOG_T_MANAGE, LOG_I_WARNING, + "realm[%s]: Client[%s] (ra): Impossible behaviour --> ignoring", + get_realmname(config, j), get_raclientname(pointer, k)); + continue; + } + if ((ConnectClient_get_state(srRaClientsTable[k]) == CONNECTCLIENT_STATE_AUTHORIZING) && + (buff[0] != AF_S_LOGIN) && (buff[0] != AF_S_ADMIN_LOGIN)) { + buff[0] = AF_S_WRONG; + } + + time(&now); + ConnectClient_set_lastActivity(srRaClientsTable[k], now); + + switch (buff[0]) { + case AF_S_LOGIN : { + if ((ConnectClient_get_state(srRaClientsTable[k]) == + CONNECTCLIENT_STATE_AUTHORIZING) && + (numofcon==(ServerRealm_get_password(pointer)[0]*256+ServerRealm_get_password(pointer)[1])) && + (length==(ServerRealm_get_password(pointer)[2]*256+ServerRealm_get_password(pointer)[3]))) { + ConnectClient_set_multi(srRaClientsTable[k], CONNECTCLIENT_MULTI_DISABLED); + for (l = 0; l < ServerRealm_get_clientsLimit(pointer); ++l) { + if (ConnectClient_get_state(srClientsTable[l]) == + CONNECTCLIENT_STATE_FREE) { + aflog(LOG_T_MANAGE | LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s] (ra) --> Client[%s]", + get_realmname(config, j), + get_raclientname(pointer, k), get_clientname(pointer, l)); + SslFd_set_fd( + ConnectClient_get_sslFd(srClientsTable[l]), + SslFd_get_fd( + ConnectClient_get_sslFd(srRaClientsTable[k]))); + ConnectClient_set_connectTime( + srClientsTable[l], + ConnectClient_get_connectTime(srRaClientsTable[k])); + ConnectClient_set_lastActivity( + srClientsTable[l], + ConnectClient_get_lastActivity(srRaClientsTable[k])); +#ifdef HAVE_LIBPTHREAD + ConnectClient_set_tunnelType( + srClientsTable[l], + ConnectClient_get_tunnelType(srRaClientsTable[k])); +#endif + ConnectClient_set_clientId( + srClientsTable[l], + ConnectClient_get_clientId(srRaClientsTable[k])); + ConnectClient_set_nameBuf( + srClientsTable[l], + ConnectClient_get_nameBuf(srRaClientsTable[k])); + ConnectClient_set_portBuf( + srClientsTable[l], + ConnectClient_get_portBuf(srRaClientsTable[k])); + tmp_ssl = SslFd_get_ssl( + ConnectClient_get_sslFd(srClientsTable[l])); + SslFd_set_ssl_nf( + ConnectClient_get_sslFd(srClientsTable[l]), + SslFd_get_ssl( + ConnectClient_get_sslFd(srRaClientsTable[k]))); + SslFd_set_ssl_nf( + ConnectClient_get_sslFd(srRaClientsTable[k]), + tmp_ssl); + ConnectClient_set_usrCliPair( + srClientsTable[l], + ConnectClient_get_usrCliPair(srRaClientsTable[k])); + ConnectClient_set_state(srRaClientsTable[k], CONNECTCLIENT_STATE_FREE); + break; + } + } + if (l != ServerRealm_get_clientsLimit(pointer)) { + ConnectClient_set_state(srClientsTable[l], CONNECTCLIENT_STATE_ACCEPTED); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: pass ok - ACCESS GRANTED", + get_realmname(config, j), get_clientname(pointer, l)); + buff[0] = AF_S_LOGIN; /* sending message */ + buff[1] = ConnectClient_get_limit( + srClientsTable[l]) >> 8;/* high bits of user number */ + buff[2] = ConnectClient_get_limit( + srClientsTable[l]); /* low bits of user number */ + buff[3] = ServerRealm_get_realmType(pointer); /* type of connection */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srClientsTable[l]), + buff, 5); + if ((task = ConnectClient_get_task(srRaClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srRaClientsTable[k], NULL); + } + if (ServerRealm_get_maxIdle(pointer)) { + ConnectClient_set_timer(srClientsTable[l], + timeval_create(ServerRealm_get_maxIdle(pointer), 0)); + task = Task_new(ConnectClient_get_timerp(srClientsTable[l]), + RCTfunction, + RCTdata_new(config, j, l, 0, RCT_REASON_MAXIDLE, &allset, &wset), + RCTdata_free); + ConnectClient_set_task(srClientsTable[l], task); + TaskScheduler_addTask(scheduler, task); + } + if (ServerRealm_get_basePortOn(pointer) == 1) { + long tmp_val; + char tmp_tab[6]; + if (check_long( + UsrCli_get_listenPortName( + srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[l])]), + &tmp_val)) { + aflog(LOG_T_CLIENT, LOG_I_ERR, + "realm[%s]: INVALID listenport - removing Client[%s]", + get_realmname(config, j), get_clientname(pointer, l)); + remove_client(pointer, l, &allset, &wset, scheduler); + break; + } + tmp_val = tmp_val%65536; + memset(tmp_tab, 0, 6); + sprintf(tmp_tab, "%d", (int)tmp_val); + ipfam = 0x01; +#ifdef AF_INET6 + if (TYPE_IS_IPV4(ServerRealm_get_realmType(pointer))) { + ipfam |= 0x02; + } + else if (TYPE_IS_IPV6(ServerRealm_get_realmType(pointer))) { + ipfam |= 0x04; + } +#endif + while (ip_listen(ConnectClient_get_listenFdp(srClientsTable[l]), + UsrCli_get_listenHostName(srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[l])]) ? + UsrCli_get_listenHostName(srUsersClientsTable[ + ConnectClient_get_usrCliPair(srClientsTable[l])]) : + ServerRealm_get_hostName(pointer), + tmp_tab, (&len), ipfam)) { + tmp_val = (tmp_val+1)%65536; + memset(tmp_tab, 0, 6); + sprintf(tmp_tab, "%d", (int)tmp_val); + } + ServerRealm_set_addressLength(pointer, len); + FD_SET(ConnectClient_get_listenFd(srClientsTable[l]), &allset); + maxfdp1 = (maxfdp1>(ConnectClient_get_listenFd(srClientsTable[l])+1)) ? + maxfdp1 : (ConnectClient_get_listenFd(srClientsTable[l])+1); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: Client[%s]: listenport=%s", + get_realmname(config, j), get_clientname(pointer, l), tmp_tab); + } + } + else { + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "realm[%s]: client limit EXCEEDED", get_realmname(config, j)); + buff[0] = AF_S_CANT_OPEN; /* sending message */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srRaClientsTable[k]), + buff, 5); + remove_raclient(pointer, k, &allset, &wset, scheduler); + } + } + else if ((ConnectClient_get_state(srRaClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED) && (numofcon == 0)) { + n = SslFd_get_message(ServerRealm_get_realmType(pointer), + ConnectClient_get_sslFd( + srRaClientsTable[k]), + buff, length); + buff[n] = 0; + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: Client[%s] (ra): ID received: %s", + get_realmname(config, j), get_raclientname(pointer, k), buff); + ConnectClient_set_sClientId(srRaClientsTable[k], (char*) buff); + } + else { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: Client[%s] (ra): Wrong password - CLOSING", + get_realmname(config, j), get_raclientname(pointer, k)); + remove_raclient(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_WRONG: { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: Client[%s] (ra): Wrong message - CLOSING", + get_realmname(config, j), get_raclientname(pointer, k)); + remove_raclient(pointer, k, &allset, &wset, scheduler); + break; + } + case AF_S_ADMIN_LOGIN: { + if ((ConnectClient_get_state(srRaClientsTable[k]) == + CONNECTCLIENT_STATE_AUTHORIZING) && + (numofcon==(ServerRealm_get_password(pointer)[0]*256+ServerRealm_get_password(pointer)[1])) && + (length==(ServerRealm_get_password(pointer)[2]*256+ServerRealm_get_password(pointer)[3]))) { + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: Client[%s] (ra): NEW remote admin -- pass OK", + get_realmname(config, j), get_raclientname(pointer, k)); + ConnectClient_set_state( + srRaClientsTable[k], + CONNECTCLIENT_STATE_ACCEPTED); + ServerRealm_increase_connectedRaClients(pointer); + if ((task = ConnectClient_get_task(srRaClientsTable[k]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(srRaClientsTable[k], NULL); + } + sprintf((char*) &buff[5], AF_VER("AFSERVER")); + n = strlen((char*) &buff[5]); + buff[0] = AF_S_ADMIN_LOGIN; /* sending message */ + buff[1] = ServerRealm_get_realmType(pointer); /* type of connection */ + buff[2] = AF_RA_UNDEFINED; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB, + ConnectClient_get_sslFd( + srRaClientsTable[k]), + buff, n+5); + } + break; + } + case AF_S_ADMIN_CMD: { + if (ConnectClient_get_state(srRaClientsTable[k]) == + CONNECTCLIENT_STATE_ACCEPTED) { + if ((n = serve_admin(config, j, k, buff))) { + if (n == 1) { + aflog(LOG_T_MANAGE, LOG_I_NOTICE, + "realm[%s]: Client[%s] (ra): remote admin -- closing", + get_realmname(config, j), get_raclientname(pointer, k)); + remove_raclient(pointer, k, &allset, &wset, scheduler); + } + else { + for (i = 0; i < ServerConfiguration_get_realmsNumber(config); ++i) { + srClientsTable = ServerRealm_get_clientsTable(scRealmsTable[i]); + l = get_clientnumber(scRealmsTable[i], n-2); + if (l != -1) { + aflog(LOG_T_MANAGE, LOG_I_NOTICE, + "realm[%s]: Client[%s] (ra): remote admin: KICKING realm[%s]: Client[%s]", + get_realmname(config, j), get_raclientname(pointer, k), + get_realmname(config, i), + get_clientname(scRealmsTable[i], l)); + buff[0] = AF_S_CLOSING; /* closing */ + SslFd_send_message(ServerRealm_get_realmType(scRealmsTable[i]), + ConnectClient_get_sslFd( + srClientsTable[l]), + buff, 5); + time(&now); + aflog(LOG_T_CLIENT, LOG_I_NOTICE, + "REALM: %s CLIENT: %s IP: %s PORT: %s DURATION: %s", + get_realmname(config, j), + get_clientname(scRealmsTable[i], l), + ConnectClient_get_nameBuf(srClientsTable[l]), + ConnectClient_get_portBuf(srClientsTable[l]), + timeperiod(now - ConnectClient_get_connectTime( + srClientsTable[l]))); + if (ServerRealm_get_auditOn(scRealmsTable[i])) { + while (AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l]))) { + aflog(LOG_T_CLIENT, LOG_I_NOTICE, + "USERID: %d IP: %s PORT: %s CONNECTED: %s DURATION: %s", + AuditListNode_get_userId( + AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l]))), + AuditListNode_get_nameBuf( + AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l]))), + AuditListNode_get_portBuf( + AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l]))), + localdate( + AuditListNode_get_connectTimep( + AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l])))), + timeperiod( + AuditListNode_get_duration( + AuditList_get_first( + ConnectClient_get_auditList( + srClientsTable[l]))))); + AuditList_delete_first( + ConnectClient_get_auditList( + srClientsTable[l])); + } + } + remove_client(scRealmsTable[i], l, + &allset, &wset, scheduler); + break; + } + } + } + } + } + else { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: Client[%s] (ra): remote admin -- security VIOLATION", + get_realmname(config, j), get_raclientname(pointer, k)); + remove_raclient(pointer, k, &allset, &wset, scheduler); + } + break; + } + case AF_S_KEEP_ALIVE: { + aflog(LOG_T_MANAGE, LOG_I_DEBUG, + "realm[%s]: Client[%s] (ra): Keep alive packet", + get_realmname(config, j), get_raclientname(pointer, k)); + break; + } + default : { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "realm[%s]: Client[%s] (ra): Unrecognized message - CLOSING", + get_realmname(config, j), get_raclientname(pointer, k)); + remove_raclient(pointer, k, &allset, &wset, scheduler); + } + } + } + /* ------------------------------------ */ + for (l = 0; l < ServerRealm_get_userClientPairs(pointer); ++l) { + if (FD_ISSET(UsrCli_get_manageFd(srUsersClientsTable[l]), &rset)) { + + aflog(LOG_T_CLIENT, LOG_I_DDEBUG, + "realm[%s]: managefd: FD_ISSET", get_realmname(config, j)); + len = ServerRealm_get_addressLength(pointer); +#ifdef HAVE_LIBPTHREAD + sent = get_new_socket(UsrCli_get_manageFd(srUsersClientsTable[l]), + ServerRealm_get_tunnelType(pointer),ServerRealm_get_clientAddress(pointer), &len, &tunneltype); +#else + sent = accept(UsrCli_get_manageFd(srUsersClientsTable[l]), ServerRealm_get_clientAddress(pointer), &len); +#endif + if (sent == -1) { + if (errno == EAGAIN) { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: managefd: FD_ISSET --> EAGAIN", get_realmname(config, j)); + } + else { + aflog(LOG_T_USER, LOG_I_DDEBUG, + "realm[%s]: managefd: FD_ISSET --> errno=%d", get_realmname(config, j), errno); + } + break; + } + flags = fcntl(sent, F_GETFL, 0); + fcntl(sent, F_SETFL, flags | O_NONBLOCK); + for (k = 0; k < ServerRealm_get_clientsLimit(pointer); ++k) { + if (ConnectClient_get_state(srClientsTable[k]) == CONNECTCLIENT_STATE_FREE) { + ConnectClient_set_clientId(srClientsTable[k], ServerRealm_get_clientsCounter(pointer)); + ServerRealm_increase_clientsCounter(pointer); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: new Client[%s]: CONNECTING", + get_realmname(config, j), get_clientname(pointer, k)); + SslFd_set_fd(ConnectClient_get_sslFd(srClientsTable[k]), sent); + ConnectClient_set_usrCliPair(srClientsTable[k], l); + time(&now); + ConnectClient_set_connectTime(srClientsTable[k], now); + ConnectClient_set_lastActivity(srClientsTable[k], now); +#ifdef HAVE_LIBPTHREAD + ConnectClient_set_tunnelType(srClientsTable[k], tunneltype); +#endif + aflog(LOG_T_CLIENT, LOG_I_INFO, + "realm[%s]: new Client[%s] IP:%s", get_realmname(config, j), get_clientname(pointer, k), + sock_ntop(ServerRealm_get_clientAddress(pointer), len, ConnectClient_get_nameBuf(srClientsTable[k]), + ConnectClient_get_portBuf(srClientsTable[k]), ServerRealm_get_dnsLookupsOn(pointer))); + FD_SET(SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k])), &allset); + maxfdp1 = (maxfdp1 > (SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k])) + 1)) ? + maxfdp1 : (SslFd_get_fd(ConnectClient_get_sslFd(srClientsTable[k])) + 1); + ServerRealm_increase_connectedClients(pointer); + ConnectClient_set_timer(srClientsTable[k], timeval_create(ServerRealm_get_timeout(pointer), 0)); + task = Task_new(ConnectClient_get_timerp(srClientsTable[k]), + RCTfunction, + RCTdata_new(config, j, k, 0, RCT_REASON_TIMEOUT, &allset, &wset), + RCTdata_free); + ConnectClient_set_task(srClientsTable[k], task); + TaskScheduler_addTask(scheduler, task); + ConnectClient_set_state(srClientsTable[k], CONNECTCLIENT_STATE_CONNECTING); + break; + } + } + if (k == ServerRealm_get_clientsLimit(pointer)) { + for (k = 0; k < ServerRealm_get_raClientsLimit(pointer); ++k) { + if (ConnectClient_get_state(srRaClientsTable[k]) == + CONNECTCLIENT_STATE_FREE) { + ConnectClient_set_clientId(srRaClientsTable[k], ServerRealm_get_clientsCounter(pointer)); + ServerRealm_increase_clientsCounter(pointer); + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: new Client[%s] (ra): CONNECTING", + get_realmname(config, j), get_raclientname(pointer, k)); + SslFd_set_fd(ConnectClient_get_sslFd(srRaClientsTable[k]), sent); + ConnectClient_set_usrCliPair(srRaClientsTable[k], l); + time(&now); + ConnectClient_set_connectTime(srRaClientsTable[k], now); + ConnectClient_set_lastActivity(srRaClientsTable[k], now); +#ifdef HAVE_LIBPTHREAD + ConnectClient_set_tunnelType(srRaClientsTable[k], tunneltype); +#endif + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: new Client[%s] (ra) IP:%s", + get_realmname(config, j), get_raclientname(pointer, k), + sock_ntop(ServerRealm_get_clientAddress(pointer), len, + ConnectClient_get_nameBuf(srRaClientsTable[k]), + ConnectClient_get_portBuf(srRaClientsTable[k]), + ServerRealm_get_dnsLookupsOn(pointer))); + FD_SET(SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k])), &allset); + maxfdp1 = (maxfdp1 > (SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k])) + 1)) ? + maxfdp1 : (SslFd_get_fd(ConnectClient_get_sslFd(srRaClientsTable[k])) + 1); + ServerRealm_increase_connectedClients(pointer); + ConnectClient_set_timer(srRaClientsTable[k], + timeval_create(ServerRealm_get_timeout(pointer), 0)); + task = Task_new(ConnectClient_get_timerp(srRaClientsTable[k]), + RCTfunction, + RCTdata_new(config, j, k, 1, RCT_REASON_TIMEOUT, &allset, &wset), + RCTdata_free); + ConnectClient_set_task(srRaClientsTable[k], task); + TaskScheduler_addTask(scheduler, task); + ConnectClient_set_state(srRaClientsTable[k], CONNECTCLIENT_STATE_CONNECTING); + break; + } + } + if (k == ServerRealm_get_raClientsLimit(pointer)) { + aflog(LOG_T_CLIENT | LOG_T_MANAGE, LOG_I_WARNING, + "realm[%s]: client limit EXCEEDED", get_realmname(config, j)); + close(sent); + } + } + break; + } + } + } /* realms loop */ + } +} diff --git a/src/afserver.h b/src/afserver.h new file mode 100644 index 0000000..bc23e75 --- /dev/null +++ b/src/afserver.h @@ -0,0 +1,57 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "network.h" +#include "file.h" +#include "stats.h" +#include "server_remoteadmin.h" +#include "server_check.h" +#include "server_set.h" +#include "server_eval.h" +#include "server_find.h" +#include "server_remove.h" +#include "make_ssl_handshake.h" +#include "first_run.h" +#include "realmnames.h" +#include "clientnames.h" +#include "usernames.h" +#include "server_get.h" +#include "http_proxy_server.h" +#include "thread_management.h" +#include "server_signals.h" +#include "usage.h" +#include "logging.h" +#include "daemon.h" +#include "timeval_functions.h" +#include "remove_client_task.h" + +#include <openssl/ssl.h> +#include <openssl/err.h> +#include <fcntl.h> +#include <signal.h> +#include <string.h> +#include <getopt.h> + +#ifndef _JS_AFSERVER_H +#define _JS_AFSERVER_H + +#endif + diff --git a/src/ar_options_struct.c b/src/ar_options_struct.c new file mode 100644 index 0000000..093ddb9 --- /dev/null +++ b/src/ar_options_struct.c @@ -0,0 +1,313 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "ar_options_struct.h" +#include "string_functions.h" +#include "server_check.h" + +/* + * Function name: ArOptions_new + * Description: Create and initialize new ArOptions structure. + * Returns: Pointer to newly created ArOptions structure. + */ + +ArOptions* +ArOptions_new() +{ + ArOptions* tmp = calloc(1, sizeof(ArOptions)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->premature = AR_OPTION_ENABLED; + tmp->delay = 5; + tmp->tries = -1; + return tmp; +} + +/* + * Function name: ArOptions_free + * Description: Free the memory allocated for ArOptions structure. + * Arguments: ao - pointer to pointer to ArOptions structure + */ + +void +ArOptions_free(ArOptions** ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + assert((*ao) != NULL); + if ((*ao) == NULL) { + return; + } + if ((*ao)->artries) { + free((*ao)->artries); + (*ao)->artries = NULL; + } + if ((*ao)->ardelay) { + free((*ao)->ardelay); + (*ao)->ardelay = NULL; + } + free((*ao)); + (*ao) = NULL; +} + +/* + * Function name: ArOptions_set_asTries + * Description: Set how many times afclient will try to reconnect. + * Arguments: ao - pointer to ArOptions structure + * tries - how many times afclient will try to reconnect + * <0 - unlimited + * 0 - disabled + * >0 - exact number + */ + +void +ArOptions_set_arTries(ArOptions* ao, int tries) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + ao->tries = tries; +} + +/* + * Function name: ArOptions_set_s_arTries + * Description: Set string describing how many times afclient will try to reconnect. + * This string has to be evaluated later in order to really set arTries value. + * Arguments: ao - pointer to ArOptions structure + * tries - string describing how many times afclient will try to reconnect. + */ + +void +ArOptions_set_s_arTries(ArOptions* ao, char* tries) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + string_cp(&(ao->artries), tries); +} + +/* + * Function name: ArOptions_set_arDelay + * Description: Set how long afclient will wait between reconnect tries. + * Arguments: ao - pointer to ArOptions structure + * delay - how long afclient will wait between reconnect tries + */ + +void +ArOptions_set_arDelay(ArOptions* ao, int delay) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + ao->delay = delay; +} + +/* + * Function name: ArOptions_set_s_arDelay + * Description: Set string describing how long afclient will wait between reconnect tries. + * This string has to be evaluated later in order to really set arDelay value. + * Arguments: ao - pointer to ArOptions structure + * delay - string describing how long afclient will wait between reconnect tries. + */ + +void +ArOptions_set_s_arDelay(ArOptions* ao, char* delay) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + string_cp(&(ao->ardelay), delay); +} + +/* + * Function name: ArOptions_set_arStart + * Description: Enable/disable auto-reconnection when afserver is not reachable on start. + * Arguments: ao - pointer to ArOptions structure + * start - value which enable (AR_OPTION_ENABLED) or disable (AR_OPTION_DISABLED) + * auto-reconnection when afserver is not reachable on start + */ + +void +ArOptions_set_arStart(ArOptions* ao, char start) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + ao->start = start; +} + +/* + * Function name: ArOptions_set_arQuit + * Description: Enable/disable auto-reconnection after normal afserver quit. + * Arguments: ao - pointer to ArOptions structure + * quit - value which enable (AR_OPTION_ENABLED) or disable (AR_OPTION_DISABLED) + * auto-reconnection after normal afserver quit + */ + +void +ArOptions_set_arQuit(ArOptions* ao, char quit) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + ao->quit = quit; +} + +/* + * Function name: ArOptions_set_arPremature + * Description: Enable/disable auto-reconnection after premature afserver quit. + * Arguments: ao - pointer to ArOptions structure + * premature - value which enable (AR_OPTION_ENABLED) or disable (AR_OPTION_DISABLED) + * auto-reconnection after premature afserver quit + */ + +void +ArOptions_set_arPremature(ArOptions* ao, char premature) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + ao->premature = premature; +} + +/* + * Function name: ArOptions_get_arTries + * Description: Get how many times afclient will try to reconnect. + * Arguments: ao - pointer to ArOptions structure + * Returns: How many times afclient will try to reconnect. + */ + +int +ArOptions_get_arTries(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return 0; + } + return ao->tries; +} + +/* + * Function name: ArOptions_get_arDelay + * Description: Get how long afclient will wait between reconnect tries. + * Arguments: ao - pointer to ArOptions structure + * Returns: How long afclient will wait between reconnect time. + */ + +int +ArOptions_get_arDelay(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return 0; + } + return ao->delay; +} + +/* + * Function name: ArOptions_get_arStart + * Description: Get status of the auto-reconnection when afserver is not reachable on start. + * Arguments: ao - pointer to ArOptions structure + * Returns: Status of the auto-reconnection when afserver is not reachable on start. + */ + +char +ArOptions_get_arStart(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return AR_OPTION_DISABLED; + } + return ao->start; +} + +/* + * Function name: ArOptions_get_arQuit + * Description: Get status of the auto-reconnection after normal afserver quit. + * Arguments: ao - pointer to ArOptions structure + * Returns: Status of the auto-reconnection after normal afserver quit. + */ + +char +ArOptions_get_arQuit(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return AR_OPTION_DISABLED; + } + return ao->quit; +} + +/* + * Function name: ArOptions_get_arPremature + * Description: Get status of the auto-reconnection after premature afserver quit. + * Arguments: ao - pointer to ArOptions structure + * Returns: Status of the auto-reconnection after premature afserver quit. + */ + +char +ArOptions_get_arPremature(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return AR_OPTION_DISABLED; + } + return ao->premature; +} + +/* + * Function name: ArOptions_evaluate_values + * Description: Evaluate arTries and arDelay values. These values are checked, when are not NULL. + * arTries have to be an integer, arDelay have to be an integer >0. If any of the + * variables is wrong, program terminates abnormally. + * Arguments: ao - pointer to ArOptions structure + */ + +void +ArOptions_evaluate_values(ArOptions* ao) +{ + assert(ao != NULL); + if (ao == NULL) { + return; + } + if (ao->artries) { + ao->tries = check_value_liberal(ao->artries, "Invalid ar-tries value"); + } + if (ao->ardelay) { + ao->delay = check_value(ao->ardelay, "Invalid ar-delay value"); + } +} diff --git a/src/ar_options_struct.h b/src/ar_options_struct.h new file mode 100644 index 0000000..2d0c59e --- /dev/null +++ b/src/ar_options_struct.h @@ -0,0 +1,59 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_AR_OPTIONS_STRUCT_H +#define _JS_AR_OPTIONS_STRUCT_H + +#define AR_OPTION_DISABLED 0 +#define AR_OPTION_ENABLED 1 + +typedef struct { + char* artries; + int tries; + char* ardelay; + int delay; + char start; + char quit; + char premature; +} ArOptions; + +/* 'constructor' */ +ArOptions* ArOptions_new(); +/* 'destructor' */ +void ArOptions_free(ArOptions** ao); +/* setters */ +void ArOptions_set_arTries(ArOptions* ao, int tries); +void ArOptions_set_s_arTries(ArOptions* ao, char* tries); +void ArOptions_set_arDelay(ArOptions* ao, int delay); +void ArOptions_set_s_arDelay(ArOptions* ao, char* delay); +void ArOptions_set_arStart(ArOptions* ao, char start); +void ArOptions_set_arQuit(ArOptions* ao, char quit); +void ArOptions_set_arPremature(ArOptions* ao, char premature); +/* getters */ +int ArOptions_get_arTries(ArOptions* ao); +int ArOptions_get_arDelay(ArOptions* ao); +char ArOptions_get_arStart(ArOptions* ao); +char ArOptions_get_arQuit(ArOptions* ao); +char ArOptions_get_arPremature(ArOptions* ao); +/* other */ +void ArOptions_evaluate_values(ArOptions* ao); + +#endif diff --git a/src/audit_list_node_struct.c b/src/audit_list_node_struct.c new file mode 100644 index 0000000..5e7a674 --- /dev/null +++ b/src/audit_list_node_struct.c @@ -0,0 +1,316 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "audit_list_node_struct.h" + +/* + * Function name: AuditListNode_new + * Description: Create and initialize new AuditListNode structure. + * Returns: Newly created AuditListNode structure. + */ + +AuditListNode* +AuditListNode_new() +{ + AuditListNode* tmp = calloc(1, sizeof(AuditListNode)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: AuditListNode_new_entry + * Description: Create and initialize new AuditListNode structure from given arguments. + * Arguments: userId - identification number of the user + * nameBuf - name of the user + * portBuf - port from which user is connected + * connectTime - start time of the connection + * duration - duration of the connection + * Returns: Newly created and initialized AuditListNode structure. + */ + +AuditListNode* +AuditListNode_new_entry(int userId, char* nameBuf, char* portBuf, + time_t connectTime, time_t duration) +{ + AuditListNode* tmp = calloc(1, sizeof(AuditListNode)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + AuditListNode_set_userId(tmp, userId); + AuditListNode_set_nameBuf(tmp, nameBuf); + AuditListNode_set_portBuf(tmp, portBuf); + AuditListNode_set_connectTime(tmp, connectTime); + AuditListNode_set_duration(tmp, duration); + return tmp; +} + +/* + * Function name: AuditListNode_free + * Description: Free the memory allocated for AuditListNode structure. + * Arguments: aln - pointer to pointer to AuditListNode structure + */ + +void +AuditListNode_free(AuditListNode** aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + assert((*aln) != NULL); + if ((*aln) == NULL) { + return; + } + free((*aln)); + (*aln) = NULL; +} + +/* + * Function name: AuditListNode_set_userId + * Description: Set user identification number. + * Arguments: aln - pointer to AuditListNode structure + * userId - user identification number + */ + +void +AuditListNode_set_userId(AuditListNode* aln, int userId) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + aln->userId = userId; +} + +/* + * Function name: AuditListNode_set_nameBuf + * Description: Set user name. + * Arguments: aln - pointer to AuditListNode structure + * nameBuf - user name + */ + +void +AuditListNode_set_nameBuf(AuditListNode* aln, char* nameBuf) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + memset(aln->nameBuf, 0, 7); + strncpy(aln->nameBuf, nameBuf, 6); +} + +/* + * Function name: AuditListNode_set_portBuf + * Description: Set port from which user is connected. + * Arguments: aln - pointer to AuditListNode structure + * portBuf - port from which user is connected + */ + +void +AuditListNode_set_portBuf(AuditListNode* aln, char* portBuf) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + memset(aln->portBuf, 0, 7); + strncpy(aln->portBuf, portBuf, 6); +} + +/* + * Function name: AuditListNode_set_connectTime + * Description: Set start time of the connection. + * Arguments: aln - pointer to AuditListNode structure + * connectTime - start time of the connection + */ + +void +AuditListNode_set_connectTime(AuditListNode* aln, time_t connectTime) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + aln->connectTime = connectTime; +} + +/* + * Function name: AuditListNode_set_duration + * Description: Set duration of the connection. + * Arguments: aln - pointer to AuditListNode structure + * duration - duration of the connection + */ + +void +AuditListNode_set_duration(AuditListNode* aln, time_t duration) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + aln->duration = duration; +} + +/* + * Function name: AuditListNode_set_nextNode + * Description: Set next node pointer. + * Arguments: aln - pointer to AuditListNode structure + * nextNode - next node pointer + */ + +void +AuditListNode_set_nextNode(AuditListNode* aln, AuditListNode* nextNode) +{ + assert(aln != NULL); + if (aln == NULL) { + return; + } + aln->nextNode = nextNode; +} + +/* + * Function name: AuditListNode_get_userId + * Description: Get user identification number. + * Arguments: aln - pointer to AuditListNode structure + * Returns: User identification number. + */ + +int +AuditListNode_get_userId(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return -1; + } + return aln->userId; +} + +/* + * Function name: AuditListNode_get_nameBuf + * Description: Get user name. + * Arguments: aln - pointer to AuditListNode structure + * Returns: User name. + */ + +char* +AuditListNode_get_nameBuf(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return NULL; + } + return aln->nameBuf; +} + +/* + * Function name: AuditListNode_get_portBuf + * Description: Get port from which user is connected. + * Arguments: aln - pointer to AuditListNode structure + * Returns: Port from which user is connected. + */ + +char* +AuditListNode_get_portBuf(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return NULL; + } + return aln->portBuf; +} + +/* + * Function name: AuditListNode_get_connectTime + * Description: Get start time of the connection. + * Arguments: aln - pointer to AuditListNode structure + * Returns: Start time of the connection. + */ + +time_t +AuditListNode_get_connectTime(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return 0; + } + return aln->connectTime; +} + +/* + * Function name: AuditListNode_get_duration + * Description: Get duration of the connection. + * Arguments: aln - pointer to AuditListNode structure + * Returns: Duration of the connection. + */ + +time_t +AuditListNode_get_duration(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return 0; + } + return aln->duration; +} + +/* + * Function name: AuditListNode_get_nextNode + * Description: Get next node pointer. + * Arguments: aln - pointer to AuditListNode structure + * Returns: Next node pointer. + */ + +AuditListNode* +AuditListNode_get_nextNode(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return NULL; + } + return aln->nextNode; +} + +/* + * Function name: AuditListNode_get_connectTimep + * Description: Get pointer to time_t variable holding start time of the connection. + * Arguments: aln - pointer to AuditListNode structure + * Returns: Pointer to time_t variable holding start time of the connection. + */ + +time_t* +AuditListNode_get_connectTimep(AuditListNode* aln) +{ + assert(aln != NULL); + if (aln == NULL) { + return 0; + } + return (&(aln->connectTime)); +} diff --git a/src/audit_list_node_struct.h b/src/audit_list_node_struct.h new file mode 100644 index 0000000..37c085c --- /dev/null +++ b/src/audit_list_node_struct.h @@ -0,0 +1,58 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <time.h> + +#ifndef _JS_AUDIT_LIST_NODE_STRUCT_H +#define _JS_AUDIT_LIST_NODE_STRUCT_H + +typedef struct alnode { + int userId; + char nameBuf[128]; + char portBuf[7]; + time_t connectTime; + time_t duration; + struct alnode* nextNode; +} AuditListNode; + +/* 'constructors' */ +AuditListNode* AuditListNode_new(); +AuditListNode* AuditListNode_new_entry(int userId, char* nameBuf, char* portBuf, + time_t connectTime, time_t duration); +/* 'destructor' */ +void AuditListNode_free(AuditListNode** aln); +/* setters */ +void AuditListNode_set_userId(AuditListNode* aln, int userId); +void AuditListNode_set_nameBuf(AuditListNode* aln, char* nameBuf); +void AuditListNode_set_portBuf(AuditListNode* aln, char* portBuf); +void AuditListNode_set_connectTime(AuditListNode* aln, time_t connectTime); +void AuditListNode_set_duration(AuditListNode* aln, time_t duration); +void AuditListNode_set_nextNode(AuditListNode* aln, AuditListNode* nextNode); +/* getters */ +int AuditListNode_get_userId(AuditListNode* aln); +char* AuditListNode_get_nameBuf(AuditListNode* aln); +char* AuditListNode_get_portBuf(AuditListNode* aln); +time_t AuditListNode_get_connectTime(AuditListNode* aln); +time_t AuditListNode_get_duration(AuditListNode* aln); +AuditListNode* AuditListNode_get_nextNode(AuditListNode* aln); +/* other */ +time_t* AuditListNode_get_connectTimep(AuditListNode* aln); + +#endif diff --git a/src/audit_list_struct.c b/src/audit_list_struct.c new file mode 100644 index 0000000..dca58d3 --- /dev/null +++ b/src/audit_list_struct.c @@ -0,0 +1,152 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "audit_list_struct.h" + +/* + * Function name: AuditList_new + * Description: Create and initialize new AuditList structure. + * Returns: Newly created AuditList structure. + */ + +AuditList* +AuditList_new() +{ + AuditList* tmp = calloc(1, sizeof(AuditList)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: AuditList_free + * Description: Free the memory allocated for AuditList structure. + * Arguments: al - pointer to pointer to AuditList structure. + */ + +void +AuditList_free(AuditList** al) +{ + assert(al != NULL); + if (al == NULL) { + return; + } + assert((*al) != NULL); + if ((*al) == NULL) { + return; + } + AuditList_clear((*al)); + free((*al)); + (*al) = NULL; +} + +/* + * Function name: AuditList_insert_back + * Description: Insert new node at the end of the list. + * Arguments: al - pointer to AuditList structure + * aln - pointer to AuditListNode structure + */ + +void +AuditList_insert_back(AuditList* al, AuditListNode* aln) +{ + assert(al != NULL); + if (al == NULL) { + return; + } + assert(aln != NULL); + if (aln == NULL) { + return; + } + if (al->tail) { + al->tail->nextNode = aln; + } + else { + al->head = aln; + } + al->tail = aln; + aln->nextNode = NULL; +} + +/* + * Function name: AuditList_get_first + * Description: Get first node from the beginning of the list. + * Arguments: al - pointer to AuditList structure + * Returns: First node from the beginning of the list. + */ + +AuditListNode* +AuditList_get_first(AuditList* al) +{ + assert(al != NULL); + if (al == NULL) { + return NULL; + } + return al->head; +} + +/* + * Function name: AuditList_delete_first + * Description: Deletes first node from the beginning of the list. + * Arguments: al - pointer to AuditList structure + */ + +void +AuditList_delete_first(AuditList* al) +{ + AuditListNode* tmp = AuditList_get_first(al); + assert(tmp != NULL); + if (tmp == NULL) { + return; + } + if (tmp == al->tail) { /* this is the last node in the list */ + al->head = al->tail = NULL; + } + else { /* there are other nodes*/ + al->head = AuditListNode_get_nextNode(tmp); + } + AuditListNode_free(&tmp); +} + +/* + * Function name: AuditList_clear + * Description: Deletes all nodes from the list. + * Arguments: al - pointer to AuditList structure + */ + +void +AuditList_clear(AuditList* al) +{ + assert(al != NULL); + if (al == NULL) { + return; + } + while (AuditList_get_first(al)) { + AuditList_delete_first(al); + } +} diff --git a/src/audit_list_struct.h b/src/audit_list_struct.h new file mode 100644 index 0000000..c70f510 --- /dev/null +++ b/src/audit_list_struct.h @@ -0,0 +1,41 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_AUDIT_LIST_STRUCT_H +#define _JS_AUDIT_LIST_STRUCT_H + +#include "audit_list_node_struct.h" + +typedef struct auditlist { + AuditListNode* head; + AuditListNode* tail; +} AuditList; + +/* 'constructor' */ +AuditList* AuditList_new(); +/* 'destructor' */ +void AuditList_free(AuditList** al); +/* other */ +void AuditList_insert_back(AuditList* al, AuditListNode* aln); +AuditListNode* AuditList_get_first(AuditList* al); +void AuditList_delete_first(AuditList* al); +void AuditList_clear(AuditList* al); + +#endif diff --git a/src/base64.c b/src/base64.c new file mode 100644 index 0000000..42eb42c --- /dev/null +++ b/src/base64.c @@ -0,0 +1,250 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "base64.h" + +/* + * Copyright (c) 1996, 1998 by Internet Software Consortium. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS + * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE + * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL + * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR + * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS + * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS + * SOFTWARE. + */ + +/* + * Portions Copyright (c) 1995 by International Business Machines, Inc. + * + * International Business Machines, Inc. (hereinafter called IBM) grants + * permission under its copyrights to use, copy, modify, and distribute this + * Software with or without fee, provided that the above copyright notice and + * all paragraphs of this notice appear in all copies, and that the name of IBM + * not be used in connection with the marketing of any product incorporating + * the Software or modifications thereof, without specific, written prior + * permission. + * + * To the extent it has a right to do so, IBM grants an immunity from suit + * under its patents, if any, for the use, sale or manufacture of products to + * the extent that such products are used for performing Domain Name System + * dynamic updates in TCP/IP networks by means of the Software. No immunity is + * granted for any product per se or for any other function of any product. + * + * THE SOFTWARE IS PROVIDED "AS IS", AND IBM DISCLAIMS ALL WARRANTIES, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE. IN NO EVENT SHALL IBM BE LIABLE FOR ANY SPECIAL, + * DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER ARISING + * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE, EVEN + * IF IBM IS APPRISED OF THE POSSIBILITY OF SUCH DAMAGES. + */ + +static const char Base64[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/"; +static const char Pad64 = '='; + +int +b64_ntop(uint8_t const *src, size_t srclength, char *target, size_t targsize) +{ + size_t datalength = 0; + uint8_t input[3]; + uint8_t output[4]; + size_t i; + + while (2 < srclength) { + input[0] = *src++; + input[1] = *src++; + input[2] = *src++; + srclength -= 3; + + output[0] = input[0] >> 2; + output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4); + output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6); + output[3] = input[2] & 0x3f; + if (output[0] >= 64) return -1; + if (output[1] >= 64) return -1; + if (output[2] >= 64) return -1; + if (output[3] >= 64) return -1; + + if (datalength + 4 > targsize) + return (-1); + target[datalength++] = Base64[output[0]]; + target[datalength++] = Base64[output[1]]; + target[datalength++] = Base64[output[2]]; + target[datalength++] = Base64[output[3]]; + } + + /* Now we worry about padding. */ + if (0 != srclength) { + /* Get what's left. */ + input[0] = input[1] = input[2] = (uint8_t) '\0'; + for (i = 0; i < srclength; i++) + input[i] = *src++; + + output[0] = input[0] >> 2; + output[1] = ((input[0] & 0x03) << 4) + (input[1] >> 4); + output[2] = ((input[1] & 0x0f) << 2) + (input[2] >> 6); + if (output[0] >= 64) return -1; + if (output[1] >= 64) return -1; + if (output[2] >= 64) return -1; + + if (datalength + 4 > targsize) + return (-1); + target[datalength++] = Base64[output[0]]; + target[datalength++] = Base64[output[1]]; + if (srclength == 1) + target[datalength++] = Pad64; + else + target[datalength++] = Base64[output[2]]; + target[datalength++] = Pad64; + } + if (datalength >= targsize) + return (-1); + target[datalength] = '\0'; /* Returned value doesn't count \0. */ + return (int) (datalength); +} + +int +b64_pton(char const *src, uint8_t *target, size_t targsize) +{ + int tarindex, state, ch; + char *pos; + + state = 0; + tarindex = 0; + + while ((ch = *src++) != '\0') { + if (isspace((unsigned char)ch)) /* Skip whitespace anywhere. */ + continue; + + if (ch == Pad64) + break; + + pos = strchr(Base64, ch); + if (pos == 0) { + /* A non-base64 character. */ + return (-1); + } + + switch (state) { + case 0: + if (target) { + if ((size_t)tarindex >= targsize) + return (-1); + target[tarindex] = (pos - Base64) << 2; + } + state = 1; + break; + case 1: + if (target) { + if ((size_t)tarindex + 1 >= targsize) + return (-1); + target[tarindex] |= (pos - Base64) >> 4; + target[tarindex+1] = ((pos - Base64) & 0x0f) + << 4 ; + } + tarindex++; + state = 2; + break; + case 2: + if (target) { + if ((size_t)tarindex + 1 >= targsize) + return (-1); + target[tarindex] |= (pos - Base64) >> 2; + target[tarindex+1] = ((pos - Base64) & 0x03) + << 6; + } + tarindex++; + state = 3; + break; + case 3: + if (target) { + if ((size_t)tarindex >= targsize) + return (-1); + target[tarindex] |= (pos - Base64); + } + tarindex++; + state = 0; + break; + default: + abort(); + } + } + + /* + * We are done decoding Base-64 chars. Let's see if we ended + * on a byte boundary, and/or with erroneous trailing characters. + */ + + if (ch == Pad64) { /* We got a pad char. */ + ch = *src++; /* Skip it, get next. */ + switch (state) { + case 0: /* Invalid = in first position */ + case 1: /* Invalid = in second position */ + return (-1); + + case 2: /* Valid, means one byte of info */ + /* Skip any number of spaces. */ + for ((void)NULL; ch != '\0'; ch = *src++) + if (!isspace((unsigned char)ch)) + break; + /* Make sure there is another trailing = sign. */ + if (ch != Pad64) + return (-1); + ch = *src++; /* Skip the = */ + /* Fall through to "single trailing =" case. */ + /* FALLTHROUGH */ + + case 3: /* Valid, means two bytes of info */ + /* + * We know this char is an =. Is there anything but + * whitespace after it? + */ + for ((void)NULL; ch != '\0'; ch = *src++) + if (!isspace((unsigned char)ch)) + return (-1); + + /* + * Now make sure for cases 2 and 3 that the "extra" + * bits that slopped past the last full byte were + * zeros. If we don't check them, they become a + * subliminal channel. + */ + if (target && target[tarindex] != 0) + return (-1); + } + } else { + /* + * We ended by seeing the end of the string. Make sure we + * have no partial bytes lying around. + */ + if (state != 0) + return (-1); + } + + return (tarindex); +} diff --git a/src/base64.h b/src/base64.h new file mode 100644 index 0000000..442b550 --- /dev/null +++ b/src/base64.h @@ -0,0 +1,41 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <sys/types.h> +#include <sys/param.h> +#include <sys/socket.h> + +#include <netinet/in.h> +#include <arpa/inet.h> + +#include <ctype.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#ifndef _JS_BASE64_H +#define _JS_BASE64_H + +/* routine to encode src with base64 algorithm */ +int b64_ntop(uint8_t const *src, size_t srclength, char *target, size_t targsize); +/* routine to decode src with base64 algorithm */ +int b64_pton(char const *src, uint8_t *target, size_t targsize); + +#endif diff --git a/src/buf_list_node_struct.c b/src/buf_list_node_struct.c new file mode 100644 index 0000000..5416ce3 --- /dev/null +++ b/src/buf_list_node_struct.c @@ -0,0 +1,289 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "buf_list_node_struct.h" + +/* + * Function name: BufListNode_new + * Description: Creates and initializes new BufListNode structure. + * Returns: Newly created BufListNode structure. + */ + +BufListNode* +BufListNode_new() +{ + BufListNode* tmp = calloc(1, sizeof(BufListNode)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: BufListNode_new_message + * Description: Create and initialize new BufListNode structure from given message + * with actual buffer pointer and message length. + * Arguments: actPtr - actual buffer pointer + * msgLen - length of the message + * message - message to be stored + * Returns: Newly created and initialized BufListNode structure. + */ + +BufListNode* +BufListNode_new_message(int actPtr, int msgLen, unsigned char* message) +{ + BufListNode* tmp = calloc(1, sizeof(BufListNode)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + BufListNode_set_message(tmp, message, msgLen); + BufListNode_set_actPtr(tmp, actPtr); + return tmp; +} + +/* + * Function name: BufListNode_free + * Description: Frees the memory allocated for BufListNode structure. + * Arguments: bln - pointer to pointer to BufListNode structure + */ + +void +BufListNode_free(BufListNode** bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return; + } + assert((*bln) != NULL); + if ((*bln) == NULL) { + return; + } + if ((*bln)->message) { + free((*bln)->message); + (*bln)->message = NULL; + } + free((*bln)); + (*bln) = NULL; +} + +/* + * Function name: BufListNode_set_actPtr + * Description: Sets actual buffer pointer. + * Arguments: bln - pointer to BufListNode structure + * actPtr - actual buffer pointer + */ + +void +BufListNode_set_actPtr(BufListNode* bln, int actPtr) +{ + assert(bln != NULL); + if (bln == NULL) { + return; + } + bln->actPtr = actPtr; +} + +/* + * Function name: BufListNode_set_msgLen + * Description: Sets length of the message. + * Arguments: bln - pointer to BufListNode structure + * msgLen - length of the message + */ + +void +BufListNode_set_msgLen(BufListNode* bln, int msgLen) +{ + assert(bln != NULL); + if (bln == NULL) { + return; + } + bln->msgLen = msgLen; +} + +/* + * Function name: BufListNode_set_message + * Description: Sets message to be stored. + * Arguments: bln - pointer to BufListNode structure + * message - message to be stored + * msgLen - length of the message + */ + +void +BufListNode_set_message(BufListNode* bln, unsigned char* message, int msgLen) +{ + assert(bln != NULL); + if (bln == NULL) { + return; + } + if (bln->message) { + free(bln->message); + bln->message = NULL; + } + BufListNode_set_actPtr(bln, 0); + BufListNode_set_msgLen(bln, 0); + assert(message != NULL); + if (message == NULL) { + return; + } + bln->message = calloc(1, msgLen); + assert(bln->message != NULL); + if (bln->message == NULL) { + return; + } + memcpy(bln->message, message, msgLen); + BufListNode_set_msgLen(bln, msgLen); +} + +/* + * Function name: BufListNode_set_nextNode + * Description: Sets next node pointer. + * Arguments: bln - pointer to BufListNode structure + * nextNode - next node pointer + */ + +void +BufListNode_set_nextNode(BufListNode* bln, BufListNode* nextNode) +{ + assert(bln != NULL); + if (bln == NULL) { + return; + } + bln->nextNode = nextNode; +} + +/* + * Function name: BufListNode_get_actPtr + * Description: Gets actual buffer pointer. + * Aguments: bln - pointer to BufListNode structure + * Returns: Actual buffer pointer. + */ + +int +BufListNode_get_actPtr(BufListNode* bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return -1; + } + return bln->actPtr; +} + +/* + * Function name: BufListNode_get_msgLen + * Description: Gets length of the message. + * Arguments: bln - pointer to BufListNode structure + * Returns: Length of the message. + */ + +int +BufListNode_get_msgLen(BufListNode* bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return -1; + } + return bln->msgLen; +} + +/* + * Function name: BufListNode_get_message + * Description: Gets stored message. + * Arguments: bln - pointer to BufListNode structure + * Returns: Stored message. + */ + +unsigned char* +BufListNode_get_message(BufListNode* bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return NULL; + } + return bln->message; +} + +/* + * Function name: BufListNode_get_nextNode + * Description: Gets next node pointer. + * Arguments: bln - pointer to BufListNode structure + * Returns: Next BufListNode structure pointer or NULL, if there is no next one. + */ + +BufListNode* +BufListNode_get_nextNode(BufListNode* bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return NULL; + } + return bln->nextNode; +} + +/* + * Function name: BufListNode_readMessage + * Description: Reads the message from actual buffer pointer. + * Arguments: bln - pointer to BufListNode structure + * Returns: Tail of the message from actual buffer pointer. + */ + +unsigned char* +BufListNode_readMessage(BufListNode* bln) +{ + assert(bln != NULL); + if (bln == NULL) { + return NULL; + } + return (&bln->message[BufListNode_get_actPtr(bln)]); +} + +/* + * Function name: BufListNode_readMessageLength + * Description: Gets the amount of unread bytes in the message. + * Arguments: bln - pointer to BufListNode structure + * Returns: The amount of unread bytes in the message. + */ + +int +BufListNode_readMessageLength(BufListNode* bln) +{ + int tmp = 0; + assert(bln != NULL); + if (bln == NULL) { + return -1; + } + assert(BufListNode_get_message(bln) != NULL); + if (BufListNode_get_message(bln) == NULL) { + return -1; + } + tmp = BufListNode_get_msgLen(bln) - BufListNode_get_actPtr(bln); + assert(tmp >= 0); + if (tmp < 0) { + return 0; + } + return tmp; +} diff --git a/src/buf_list_node_struct.h b/src/buf_list_node_struct.h new file mode 100644 index 0000000..08a4cfb --- /dev/null +++ b/src/buf_list_node_struct.h @@ -0,0 +1,50 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_BUF_LIST_NODE_STRUCT_H +#define _JS_BUF_LIST_NODE_STRUCT_H + +typedef struct blnode { + int actPtr; + int msgLen; + unsigned char* message; + struct blnode* nextNode; +} BufListNode; + +/* 'constructors' */ +BufListNode* BufListNode_new(); +BufListNode* BufListNode_new_message(int actPtr, int msgLen, unsigned char* message); +/* 'destructor' */ +void BufListNode_free(BufListNode** bln); +/* setters */ +void BufListNode_set_actPtr(BufListNode* bln, int actPtr); +void BufListNode_set_msgLen(BufListNode* bln, int msgLen); +void BufListNode_set_message(BufListNode* bln, unsigned char* message, int msgLen); +void BufListNode_set_nextNode(BufListNode* bln, BufListNode* nextNode); +/* getters */ +int BufListNode_get_actPtr(BufListNode* bln); +int BufListNode_get_msgLen(BufListNode* bln); +unsigned char* BufListNode_get_message(BufListNode* bln); +BufListNode* BufListNode_get_nextNode(BufListNode* bln); +/* other methods */ +unsigned char* BufListNode_readMessage(BufListNode* bln); +int BufListNode_readMessageLength(BufListNode* bln); + +#endif diff --git a/src/buf_list_struct.c b/src/buf_list_struct.c new file mode 100644 index 0000000..cbdbe09 --- /dev/null +++ b/src/buf_list_struct.c @@ -0,0 +1,152 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "buf_list_struct.h" + +/* + * Function name: BufList_new + * Description: Creates and initializes new BufList structure. + * Returns: Newly created BufList structure. + */ + +BufList* +BufList_new() +{ + BufList* tmp = calloc(1, sizeof(BufList)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: BufList_free + * Description: Frees the memory allocated for BufList structure. + * Arguments: bl - pointer to pointer to BufList structure. + */ + +void +BufList_free(BufList** bl) +{ + assert(bl != NULL); + if (bl == NULL) { + return; + } + assert((*bl) != NULL); + if ((*bl) == NULL) { + return; + } + BufList_clear((*bl)); + free((*bl)); + (*bl) = NULL; +} + +/* + * Function name: BufList_insert_back + * Description: Inserts new node at the end of the list. + * Arguments: bl - pointer to BufList structure + * bln - pointer to BufListNode structure + */ + +void +BufList_insert_back(BufList* bl, BufListNode* bln) +{ + assert(bl != NULL); + if (bl == NULL) { + return; + } + assert(bln != NULL); + if (bln == NULL) { + return; + } + if (bl->tail) { + bl->tail->nextNode = bln; + } + else { + bl->head = bln; + } + bl->tail = bln; + bln->nextNode = NULL; +} + +/* + * Function name: BufList_get_first + * Description: Get first node from the beginning of the list. + * Arguments: bl - pointer to BufList structure + * Returns: First node from the beginning of the list. + */ + +BufListNode* +BufList_get_first(BufList* bl) +{ + assert(bl != NULL); + if (bl == NULL) { + return NULL; + } + return bl->head; +} + +/* + * Function name: BufList_delete_first + * Description: Deletes first node from the beginning of the list. + * Arguments: bl - pointer to BufList structure + */ + +void +BufList_delete_first(BufList* bl) +{ + BufListNode* tmp = BufList_get_first(bl); + assert(tmp != NULL); + if (tmp == NULL) { + return; + } + if (tmp == bl->tail) { /* this is the last node in the list */ + bl->head = bl->tail = NULL; + } + else { /* there are other nodes*/ + bl->head = BufListNode_get_nextNode(tmp); + } + BufListNode_free(&tmp); +} + +/* + * Function name: BufList_clear + * Description: Deletes all nodes from the list. + * Arguments: bl - pointer to BufList structure + */ + +void +BufList_clear(BufList* bl) +{ + assert(bl != NULL); + if (bl == NULL) { + return; + } + while (BufList_get_first(bl)) { + BufList_delete_first(bl); + } +} diff --git a/src/buf_list_struct.h b/src/buf_list_struct.h new file mode 100644 index 0000000..d2bce00 --- /dev/null +++ b/src/buf_list_struct.h @@ -0,0 +1,41 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_BUF_LIST_STRUCT_H +#define _JS_BUF_LIST_STRUCT_H + +#include "buf_list_node_struct.h" + +typedef struct buflist { + BufListNode* head; + BufListNode* tail; +} BufList; + +/* 'constructor' */ +BufList* BufList_new(); +/* 'destructor' */ +void BufList_free(BufList** bl); +/* other */ +void BufList_insert_back(BufList* bl, BufListNode* bln); +BufListNode* BufList_get_first(BufList* bl); +void BufList_delete_first(BufList* bl); +void BufList_clear(BufList* bl); + +#endif diff --git a/src/client_configuration_struct.c b/src/client_configuration_struct.c new file mode 100644 index 0000000..6edb6f1 --- /dev/null +++ b/src/client_configuration_struct.c @@ -0,0 +1,336 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "string_functions.h" +#include "client_configuration_struct.h" + +/* + * Function name: ClientConfiguration_new + * Description: Create and initialize new ClientConfiguration structure. + * Returns: Pointer to newly created ClientConfiguration structure. + */ + +ClientConfiguration* +ClientConfiguration_new() +{ + ClientConfiguration* tmp = calloc(1, sizeof(ClientConfiguration)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: ClientConfiguration_free + * Description: Free the memory allocated for ClientConfiguration structure. + * Arguments: cc - pointer to pointer to ClientConfiguration structure + */ + +void +ClientConfiguration_free(ClientConfiguration** cc) +{ + int i; + assert(cc != NULL); + if (cc == NULL) { + return; + } + assert((*cc) != NULL); + if ((*cc) == NULL) { + return; + } + if ((*cc)->keysFile) { + free((*cc)->keysFile); + (*cc)->keysFile = NULL; + } + if ((*cc)->certificateFile) { + free((*cc)->certificateFile); + (*cc)->certificateFile = NULL; + } + if ((*cc)->storeFile) { + free((*cc)->storeFile); + (*cc)->storeFile = NULL; + } + if ((*cc)->realmsTable) { + for (i = 0; i < (*cc)->realmsNumber; ++i) { + if ((*cc)->realmsTable[i]) { + ClientRealm_free(&((*cc)->realmsTable[i])); + } + } + free((*cc)->realmsTable); + (*cc)->realmsTable = NULL; + } + free((*cc)); + (*cc) = NULL; +} + +/* + * Function name: ClientConfiguration_set_keysFile + * Description: Set keys filename. + * Arguments: cc - pointer to ClientConfiguration structure + * keysFile - keys filename + */ + +void +ClientConfiguration_set_keysFile(ClientConfiguration* cc, char* keysFile) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + string_cp(&(cc->keysFile), keysFile); +} + +/* + * Function name: ClientConfiguration_set_certificateFile + * Description: Set certs filename. + * Arguments: cc - pointer to ClientConfiguration structure + * certificateFile - certs filename + */ + +void +ClientConfiguration_set_certificateFile(ClientConfiguration* cc, char* certificateFile) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + string_cp(&(cc->certificateFile), certificateFile); +} + +/* + * Function name: ClientConfiguration_set_storeFile + * Description: Set store filename. + * Arguments: cc - pointer to ClientConfiguration structure + * storeFile - store filename + */ + +void +ClientConfiguration_set_storeFile(ClientConfiguration* cc, char* storeFile) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + string_cp(&(cc->storeFile), storeFile); +} + +/* + * Function name: ClientConfiguration_set_dateFormat + * Description: Set format of the date string. + * Arguments: cc - pointer to ClientConfiguration structure + * dateFormat - format of the date string + */ + +void +ClientConfiguration_set_dateFormat(ClientConfiguration* cc, char* dateFormat) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + string_cp(&(cc->dateFormat), dateFormat); +} + +/* + * Function name: ClientConfiguration_set_realmsNumber + * Description: Set number of realms. + * Arguments: cc - pointer to ClientConfiguration structure + * realmsNumber - number of realms + */ + +void +ClientConfiguration_set_realmsNumber(ClientConfiguration* cc, int realmsNumber) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->realmsNumber = realmsNumber; +} + +/* + * Function name: ClientConfiguration_set_realmsTable + * Description: Set table of realms. + * Arguments: cc - pointer to ClientConfiguration structure + * realmsTable - table of realms + */ + +void +ClientConfiguration_set_realmsTable(ClientConfiguration* cc, ClientRealm** realmsTable) +{ + int i; + assert(cc != NULL); + if (cc == NULL) { + return; + } + if (cc->realmsTable) { + for (i = 0; i < cc->realmsNumber; ++i) { + if (cc->realmsTable[i]) { + ClientRealm_free(&(cc->realmsTable[i])); + } + } + free(cc->realmsTable); + cc->realmsTable = NULL; + } + cc->realmsTable = realmsTable; +} + +/* + * Function name: ClientConfiguration_set_ignorePublicKeys + * Description: Enable/disable the public keys checking. + * Arguments: cc - pointer to ClientConfiguration structure + * ignorePublicKeys - if the public keys checking is enabled/disabled + */ + +void +ClientConfiguration_set_ignorePublicKeys(ClientConfiguration* cc, char ignorePublicKeys) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->ignorePublicKeys = ignorePublicKeys; +} + +/* + * Function name: ClientConfiguration_get_keysFile + * Description: Get keys filename. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Keys filename. + */ + +char* +ClientConfiguration_get_keysFile(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->keysFile; +} + +/* + * Function name: ClientConfiguration_get_certificateFile + * Description: Get certs filename. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Certs filename. + */ + +char* +ClientConfiguration_get_certificateFile(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->certificateFile; +} + +/* + * Function name: ClientConfiguration_get_storeFile + * Description: Get store filename. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Store filename. + */ + +char* +ClientConfiguration_get_storeFile(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->storeFile; +} + +/* + * Function name: ClientConfiguration_get_dateFormat + * Description: Get format of the date string. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Format of the date string. + */ + +char* +ClientConfiguration_get_dateFormat(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->dateFormat; +} + +/* + * Function name: ClientConfiguration_get_realmsNumber + * Description: Get number of realms. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Number of realms. + */ + +int +ClientConfiguration_get_realmsNumber(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->realmsNumber; +} + +/* + * Function name: ClientConfiguration_get_realmsTable + * Description: Get table of realms. + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: Table of realms. + */ + +ClientRealm** +ClientConfiguration_get_realmsTable(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->realmsTable; +} + +/* + * Function name: ClientConfiguration_get_ignorePublicKeys + * Description: Check if the public keys checking is enabled/disabled + * Arguments: cc - pointer to ClientConfiguration structure + * Returns: If the public keys checking is enabled/disabled. + */ + +char +ClientConfiguration_get_ignorePublicKeys(ClientConfiguration* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return 0; + } + return cc->ignorePublicKeys; +} diff --git a/src/client_configuration_struct.h b/src/client_configuration_struct.h new file mode 100644 index 0000000..15e590d --- /dev/null +++ b/src/client_configuration_struct.h @@ -0,0 +1,58 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_CLIENT_CONFIGURATION_STRUCT_H +#define _JS_CLIENT_CONFIGURATION_STRUCT_H + +#include "client_realm_struct.h" + +typedef struct { + char* keysFile; + char* certificateFile; + char* storeFile; + char* dateFormat; + int realmsNumber; + char ignorePublicKeys; + ClientRealm** realmsTable; +} ClientConfiguration; + +/* 'constructor' */ +ClientConfiguration* ClientConfiguration_new(); +/* 'destructor' */ +void ClientConfiguration_free(ClientConfiguration** cc); +/* setters */ +void ClientConfiguration_set_keysFile(ClientConfiguration* cc, char* keysFile); +void ClientConfiguration_set_certificateFile(ClientConfiguration* cc, char* certificateFile); +void ClientConfiguration_set_storeFile(ClientConfiguration* cc, char* storeFile); +void ClientConfiguration_set_dateFormat(ClientConfiguration* cc, char* dateFormat); +void ClientConfiguration_set_realmsNumber(ClientConfiguration* cc, int realmsNumber); +void ClientConfiguration_set_realmsTable(ClientConfiguration* cc, ClientRealm** realmsTable); +void ClientConfiguration_set_ignorePublicKeys(ClientConfiguration* cc, char ignorePublicKeys); +/* getters */ +char* ClientConfiguration_get_keysFile(ClientConfiguration* cc); +char* ClientConfiguration_get_certificateFile(ClientConfiguration* cc); +char* ClientConfiguration_get_storeFile(ClientConfiguration* cc); +char* ClientConfiguration_get_dateFormat(ClientConfiguration* cc); +int ClientConfiguration_get_realmsNumber(ClientConfiguration* cc); +ClientRealm** ClientConfiguration_get_realmsTable(ClientConfiguration* cc); +char ClientConfiguration_get_ignorePublicKeys(ClientConfiguration* cc); + +#endif diff --git a/src/client_initialization.c b/src/client_initialization.c new file mode 100644 index 0000000..efde9a9 --- /dev/null +++ b/src/client_initialization.c @@ -0,0 +1,343 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> + +#include "client_initialization.h" +#include "first_run.h" +#include "network.h" +#include "base64.h" +#include "ssl_routines.h" +#include "client_configuration_struct.h" +#include "client_signals.h" + +int +initialize_client_stage1(ClientRealm* cr, SSL_CTX* ctx, unsigned char* buff, char wanttoexit, + char ignorePublicKeys) +{ + int n, nlen, elen, len, tmp; + unsigned int olen; + X509* server_cert; + const EVP_MD *md; + EVP_PKEY* pkey; + EVP_MD_CTX md_ctx; + unsigned char *encoded = NULL; + char b64_encoded[100]; + unsigned char *key_buf = NULL; + assert((ClientRealm_get_tunnelType(cr) == 0) || (ClientRealm_get_tunnelType(cr) == 1)); + switch (ClientRealm_get_tunnelType(cr)) { + case 0: { + if (ip_connect(&tmp, ClientRealm_get_serverName(cr), + ClientRealm_get_managePort(cr), + ClientRealm_get_ipFamily(cr), + ClientRealm_get_localName(cr), + ClientRealm_get_localPort(cr))) { +#ifdef AF_INET6 + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_connect_%s error for %s, %s", + (ClientRealm_get_ipFamily(cr) & 0x02) ? + "ipv4":(ClientRealm_get_ipFamily(cr) & 0x04) ? + "ipv6":"unspec", ClientRealm_get_serverName(cr), ClientRealm_get_managePort(cr)); +#else + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_connect error for %s, %s", ClientRealm_get_serverName(cr), ClientRealm_get_managePort(cr)); +#endif + if (wanttoexit) { + exit(1); + } + else { + return 1; + } + } + SslFd_set_fd(ClientRealm_get_masterSslFd(cr), tmp); + break; + } +#ifdef HAVE_LIBPTHREAD + case 1: { + if (initialize_http_proxy_client(&tmp, cr, ctx)) { +#ifdef AF_INET6 + aflog(LOG_T_INIT, LOG_I_CRIT, + "http_proxy_connect_%s error for %s, %s (proxy: %s, %s)", + (ClientRealm_get_ipFamily(cr) & 0x02) ? + "ipv4":(ClientRealm_get_ipFamily(cr) & 0x04) ? + "ipv6":"unspec", ClientRealm_get_serverName(cr), + ClientRealm_get_managePort(cr), + HttpProxyOptions_get_proxyname(ClientRealm_get_httpProxyOptions(cr)), + HttpProxyOptions_get_proxyport(ClientRealm_get_httpProxyOptions(cr))); +#else + aflog(LOG_T_INIT, LOG_I_CRIT, + "http_proxy_connect error for %s, %s (proxy: %s, %s)", ClientRealm_get_serverName(cr), + ClientRealm_get_managePort(cr), + HttpProxyOptions_get_proxyname(ClientRealm_get_httpProxyOptions(cr)), + HttpProxyOptions_get_proxyport(ClientRealm_get_httpProxyOptions(cr))); +#endif + if (wanttoexit) { + exit(1); + } + else { + return 1; + } + } + SslFd_set_fd(ClientRealm_get_masterSslFd(cr), tmp); + break; + } +#endif + default: { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Unknown tunnel type"); + if (wanttoexit) { + exit(1); + } + else { + return 1; + } + break; + } + } + + SslFd_set_ssl(ClientRealm_get_masterSslFd(cr), SSL_new(ctx)); + if (SSL_set_fd(SslFd_get_ssl(ClientRealm_get_masterSslFd(cr)), + SslFd_get_fd(ClientRealm_get_masterSslFd(cr))) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with initializing ssl... exiting"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 2; + } + } + + alarm(60); + + aflog(LOG_T_INIT, LOG_I_INFO, + "Trying SSL_connect"); + if ((n = SSL_connect(SslFd_get_ssl(ClientRealm_get_masterSslFd(cr)))) == 1) { + if ((server_cert = SSL_get_peer_certificate(SslFd_get_ssl(ClientRealm_get_masterSslFd(cr)))) == NULL) { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Server did not present a certificate... exiting"); + exit(1); + } + /* FIXME: change almost everything here */ + pkey = X509_get_pubkey(server_cert); + if (pkey == NULL) { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Server's public key is invalid... exiting"); + exit(1); + } + nlen = BN_num_bytes(pkey->pkey.rsa->n); + elen = BN_num_bytes(pkey->pkey.rsa->e); + len = nlen + elen; + key_buf = malloc(len); + if (key_buf == NULL) { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Cannot allocate memory for server's public key checking... exiting"); + exit(1); + } + BN_bn2bin(pkey->pkey.rsa->n, key_buf); + BN_bn2bin(pkey->pkey.rsa->e, key_buf + nlen); + md = EVP_md5(); + EVP_DigestInit(&md_ctx, md); + EVP_DigestUpdate(&md_ctx, key_buf, len); + encoded = calloc(1, EVP_MAX_MD_SIZE+1); + if (encoded == NULL) { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Cannot allocate memory for server's public key checking... exiting"); + exit(1); + } + EVP_DigestFinal(&md_ctx, encoded, &olen); + + if (b64_ntop(encoded, olen, b64_encoded, 100) == -1) { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Problem with base64 encoding... exiting"); + exit(1); + } + + switch (check_public_key(get_store_filename(), ClientRealm_get_serverName(cr), b64_encoded)) { + case SSL_PUBLIC_KEY_VALID: + /* public key is ok - do nothing */ + break; + case SSL_PUBLIC_KEY_NOT_KNOWN: + aflog(LOG_T_MAIN, LOG_I_WARNING, + "WARNING: implicitly added new server's public key to the list of known hosts"); + add_public_key(get_store_filename(), ClientRealm_get_serverName(cr), b64_encoded); + break; + default: + if (ignorePublicKeys) { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "WARNING: Invalid server's public key... ignoring"); + } + else { + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Invalid server's public key... exiting"); + aflog(LOG_T_MAIN, LOG_I_CRIT, + "Please delete conflicting entry in %s or use '--ignorepkeys' option", + get_store_filename()); + exit(1); + } + } + + memset(key_buf, 0, len); + free(key_buf); + free(encoded); + + aflog(LOG_T_INIT, LOG_I_INFO, + "SSL_connect successful"); + } + else { + alarm(0); + aflog(LOG_T_INIT, LOG_I_CRIT, + "SSL_connect has failed (%d | %d)... exiting", n, + SSL_get_error(SslFd_get_ssl(ClientRealm_get_masterSslFd(cr)), n)); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 3; + } + } + alarm(0); + + buff[0] = AF_S_LOGIN; + buff[1] = ClientRealm_get_password(cr)[0]; + buff[2] = ClientRealm_get_password(cr)[1]; + buff[3] = ClientRealm_get_password(cr)[2]; + buff[4] = ClientRealm_get_password(cr)[3]; + + return 0; +} + +int +initialize_client_stage2(ClientRealm* cr, unsigned char* buff, char wanttoexit) +{ + SslFd_send_message(ClientRealm_get_realmType(cr) | TYPE_SSL | TYPE_ZLIB, + ClientRealm_get_masterSslFd(cr), buff, 5); + buff[0] = 0; + SslFd_get_message(ClientRealm_get_realmType(cr) | TYPE_SSL | TYPE_ZLIB, + ClientRealm_get_masterSslFd(cr), buff, -5); + + if ( buff[0] == 0 ) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Connection with afserver failed"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + if ( buff[0] == AF_S_WRONG ) { + aflog(LOG_T_INIT, LOG_I_ERR, + "Wrong password"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + if ( buff[0] == AF_S_CANT_OPEN ) { + aflog(LOG_T_INIT, LOG_I_ERR, + "Server is full"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + if ( buff[0] != AF_S_LOGIN ) { + aflog(LOG_T_INIT, LOG_I_ERR, + "Incompatible server type or server full"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + + ClientRealm_set_realmType(cr, buff[3]); + ClientRealm_set_usersLimit(cr, buff[1] * 256 + buff[2]); + return 0; +} + +int +initialize_client_stage3(ClientRealm* cr, int* buflength, fd_set* allset, fd_set* wset, int* maxfdp1, + char wanttoexit) +{ + int i; + socklen_t len; + ConnectUser** usersTable; + usersTable = calloc(ClientRealm_get_usersLimit(cr), sizeof(ConnectUser*)); + if (usersTable == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - unable to successfully communicate with server"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + ClientRealm_set_usersTable(cr, usersTable); + for (i = 0; i < ClientRealm_get_usersLimit(cr); ++i) { + usersTable[i] = ConnectUser_new(); + if (usersTable[i] == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Calloc error - unable to successfully communicate with server"); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 1; + } + } + } + + len = 4; + if (getsockopt(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), SOL_SOCKET, SO_SNDBUF, buflength, &len) == -1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Can't get socket send buffer size - exiting..."); + if (wanttoexit) { + exit(1); + } + else { + close(SslFd_get_fd(ClientRealm_get_masterSslFd(cr))); + return 2; + } + } + + FD_ZERO(allset); + FD_ZERO(wset); + + FD_SET(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), allset); + (*maxfdp1) = SslFd_get_fd(ClientRealm_get_masterSslFd(cr)) + 1; + return 0; +} diff --git a/src/client_initialization.h b/src/client_initialization.h new file mode 100644 index 0000000..390568f --- /dev/null +++ b/src/client_initialization.h @@ -0,0 +1,42 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "activefor.h" +#include "stats.h" +#include "logging.h" +#include "http_proxy_client.h" +#include "http_proxy_options_struct.h" +#include "ssl_fd_struct.h" +#include "client_realm_struct.h" + +#include <openssl/ssl.h> + +#ifndef _JS_CLIENT_INITIALIZATION_H +#define _JS_CLIENT_INITIALIZATION_H + +int initialize_client_stage1(ClientRealm* cr, SSL_CTX* ctx, unsigned char* buff, char wanttoexit, + char ignorePublicKeys); +int initialize_client_stage2(ClientRealm* cr, unsigned char* buff, char wanttoexit); +int initialize_client_stage3(ClientRealm* cr, int* buflength, fd_set* allset, fd_set* wset, int* maxfdp1, + char wanttoexit); + +#endif diff --git a/src/client_realm_struct.c b/src/client_realm_struct.c new file mode 100644 index 0000000..5b4477e --- /dev/null +++ b/src/client_realm_struct.c @@ -0,0 +1,1205 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "string_functions.h" +#include "client_realm_struct.h" +#include "client_shutdown.h" +#include "logging.h" + +/* + * Function name: ClientRealm_new + * Description: Create and initialize new ClientRealm structure. + * Returns: Pointer to newly created ClientRealm structure. + */ + +ClientRealm* +ClientRealm_new() +{ + ClientRealm* tmp = calloc(1, sizeof(ClientRealm)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->password[0] = 1; + tmp->password[1] = 2; + tmp->password[2] = 3; + tmp->password[3] = 4; + tmp->masterSslFd = SslFd_new(); + assert(tmp->masterSslFd != NULL); + if (tmp->masterSslFd == NULL) { + ClientRealm_free(&tmp); + return NULL; + } + tmp->arOptions = ArOptions_new(); + assert(tmp->arOptions != NULL); + if (tmp->arOptions == NULL) { + ClientRealm_free(&tmp); + return NULL; + } + tmp->httpProxyOptions = HttpProxyOptions_new(); + assert(tmp->httpProxyOptions != NULL); + if (tmp->httpProxyOptions == NULL) { + ClientRealm_free(&tmp); + return NULL; + } +#ifdef HAVE_LIBDL + tmp->userModule = Module_new(); + assert(tmp->userModule != NULL); + if (tmp->userModule == NULL) { + ClientRealm_free(&tmp); + return NULL; + } + tmp->serviceModule = Module_new(); + assert(tmp->serviceModule != NULL); + if (tmp->serviceModule == NULL) { + ClientRealm_free(&tmp); + return NULL; + } +#endif + return tmp; +} + +/* + * Function name: ClientRealm_free + * Description: Free the memory allocated for ClientRealm structure. + * Arguments: cr - pointer to pointer to ClientRealm structure + */ + +void +ClientRealm_free(ClientRealm** cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + assert((*cr) != NULL); + if ((*cr) == NULL) { + return; + } + ClientRealm_set_serverName((*cr), NULL); + ClientRealm_set_managePort((*cr), NULL); + ClientRealm_set_hostName((*cr), NULL); + ClientRealm_set_realmName((*cr), NULL); + ClientRealm_set_sKeepAliveTimeout((*cr), NULL); + ClientRealm_set_realmId((*cr), NULL); + ClientRealm_set_localName((*cr), NULL); + ClientRealm_set_localPort((*cr), NULL); + ClientRealm_set_localDestinationName((*cr), NULL); + ClientRealm_set_clientAddress((*cr), NULL); + ClientRealm_set_masterSslFd((*cr), NULL); + ClientRealm_set_httpProxyOptions((*cr), NULL); + ClientRealm_set_arOptions((*cr), NULL); + ClientRealm_set_destinationPorts((*cr), NULL); + ClientRealm_set_usersTable((*cr), NULL); +#ifdef HAVE_LIBDL + ClientRealm_set_userModule((*cr), NULL); + ClientRealm_set_serviceModule((*cr), NULL); +#endif + free((*cr)); + (*cr) = NULL; +} + +/* + * Function name: ClientRealm_set_serverName + * Description: Set realm's server name. + * Arguments: cr - pointer to ClientRealm structure + * serverName - realm's host name + */ + +void +ClientRealm_set_serverName(ClientRealm* cr, char* serverName) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->serverName), serverName); +} + +/* + * Function name: ClientRealm_set_managePort + * Description: Set realm's manage port description. + * Arguments: cr - pointer to ClientRealm structure + * managePort - realm's manage port description + */ + +void +ClientRealm_set_managePort(ClientRealm* cr, char* managePort) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->managePort), managePort); +} + +/* + * Function name: ClientRealm_set_hostName + * Description: Set realm's host name. + * Arguments: cr - pointer to ClientRealm structure + * hostName - realm's host name + */ + +void +ClientRealm_set_hostName(ClientRealm* cr, char* hostName) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->hostName), hostName); +} + +/* + * Function name: ClientRealm_set_destinationPorts + * Description: Set realm's destination ports list. + * Arguments: cr - pointer to ClientRealm structure + * destinationPorts - realm's destination ports list + */ + +void +ClientRealm_set_destinationPorts(ClientRealm* cr, PortList* destinationPorts) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->destinationPorts) { + PortList_free(&(cr->destinationPorts)); + } + cr->destinationPorts = destinationPorts; +} + +/* + * Function name: ClientRealm_set_sKeepAliveTimeout + * Description: Set keep-alive timeout value description. + * Arguments: cr - pointer to ClientRealm structure + * sKeepAliveTimeout - keep-alive timeout value description + */ + +void +ClientRealm_set_sKeepAliveTimeout(ClientRealm* cr, char* sKeepAliveTimeout) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->sKeepAliveTimeout), sKeepAliveTimeout); +} + +/* + * Function name: ClientRealm_set_realmName + * Description: Set realm's name. + * Arguments: cr - pointer to ClientRealm structure + * realmName - realm's name + */ + +void +ClientRealm_set_realmName(ClientRealm* cr, char* realmName) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->realmName), realmName); +} + +/* + * Function name: ClientRealm_set_realmId + * Description: Set realm's id. + * Arguments: cr - pointer to ClientRealm structure + * realmId - realm's id + */ + +void +ClientRealm_set_realmId(ClientRealm* cr, char* realmId) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->realmId), realmId); +} + +/* + * Function name: ClientRealm_set_localName + * Description: Set realm's local name. + * Arguments: cr - pointer to ClientRealm structure + * localName - realm's local name + */ + +void +ClientRealm_set_localName(ClientRealm* cr, char* localName) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->localName), localName); +} + +/* + * Function name: ClientRealm_set_localPort + * Description: Set realm's local port description. + * Arguments: cr - pointer to ClientRealm structure + * localPort - realm's local port description + */ + +void +ClientRealm_set_localPort(ClientRealm* cr, char* localPort) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->localPort), localPort); +} + +/* + * Function name: ClientRealm_set_localDestinationName + * Description: Set realm's local destination name. + * Arguments: cr - pointer to ClientRealm structure + * localDestinationName - realm's local destination name + */ + +void +ClientRealm_set_localDestinationName(ClientRealm* cr, char* localDestinationName) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + string_cp(&(cr->localDestinationName), localDestinationName); +} + +/* + * Function name: ClientRealm_set_password + * Description: Set realm's password. + * Arguments: cr - pointer to ClientRealm structure + * password - realm's password + */ + +void +ClientRealm_set_password(ClientRealm* cr, unsigned char* password) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + memcpy(cr->password, password, 4); +} + +/* + * Function name: ClientRealm_set_connectedUsers + * Description: Set number of connected users. + * Arguments: cr - pointer to ClientRealm structure + * connectedUsers - number of connected users + */ + +void +ClientRealm_set_connectedUsers(ClientRealm* cr, int connectedUsers) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->connectedUsers = connectedUsers; +} + +/* + * Function name: ClientRealm_set_usersLimit + * Description: Set limit of connected users. + * Arguments: cr - pointer to ClientRealm structure + * usersLimit - limit of connected users + */ + +void +ClientRealm_set_usersLimit(ClientRealm* cr, int usersLimit) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->usersLimit = usersLimit; +} + +/* + * Function name: ClientRealm_set_keepAliveTimeout + * Description: Set keep-alive timeout value. + * Arguments: cr - pointer to ClientRealm structure + * keepAliveTimeout - keep-alive timeout value + */ + +void +ClientRealm_set_keepAliveTimeout(ClientRealm* cr, int keepAliveTimeout) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->keepAliveTimeout = keepAliveTimeout; +} + +/* + * Function name: ClientRealm_set_clientMode + * Description: Set client mode. + * Arguments: cr - pointer to ClientRealm structure + * clientMode - client mode + */ + +void +ClientRealm_set_clientMode(ClientRealm* cr, int clientMode) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->clientMode = clientMode; +} + +/* + * Function name: ClientRealm_set_ipFamily + * Description: Set IP family. + * Arguments: cr - pointer to ClientRealm structure + * ipFamily - IP family + */ + +void +ClientRealm_set_ipFamily(ClientRealm* cr, char ipFamily) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->ipFamily = ipFamily; +} + +/* + * Function name: ClientRealm_set_realmType + * Description: Set type of the realm. + * Arguments: cr - pointer to ClientRealm structure + * realmType - type of the realm + */ + +void +ClientRealm_set_realmType(ClientRealm* cr, char realmType) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->realmType = realmType; +} + +/* + * Function name: ClientRealm_set_tunnelType + * Description: Set type of the tunnel. + * Arguments: cr - pointer to ClientRealm structure + * tunnelType - type of the tunnel + */ + +void +ClientRealm_set_tunnelType(ClientRealm* cr, char tunnelType) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->tunnelType = tunnelType; +} + +/* + * Function name: ClientRealm_set_keepAlive + * Description: Set keep-alive timeval struct. + * Arguments: cr - pointer to ClientRealm structure + * keepAlive - keep-alive timeval struct + */ + +void +ClientRealm_set_keepAlive(ClientRealm* cr, struct timeval keepAlive) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->keepAlive = keepAlive; +} + +/* + * Function name: ClientRealm_set_addressLength + * Description: Set client's address length. + * Arguments: cr - pointer to ClientRealm structure + * addressLength - client's address length + */ + +void +ClientRealm_set_addressLength(ClientRealm* cr, socklen_t addressLength) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + cr->addressLength = addressLength; +} + +/* + * Function name: ClientRealm_set_clientAddress + * Description: Set client's network address. + * Arguments: cr - pointer to ClientRealm structure + * clientAddress - client's network address + */ + +void +ClientRealm_set_clientAddress(ClientRealm* cr, struct sockaddr* clientAddress) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->clientAddress) { + free(cr->clientAddress); + cr->clientAddress = NULL; + } + cr->clientAddress = clientAddress; +} + +/* + * Function name: ClientRealm_set_masterSslFd + * Description: Set client realm's master sslfd. + * Arguments: cr - pointer to ClientRealm structure + * masterSslFd - client realm's master sslfd + */ + +void +ClientRealm_set_masterSslFd(ClientRealm* cr, SslFd* masterSslFd) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->masterSslFd) { + SslFd_free(&(cr->masterSslFd)); + } + cr->masterSslFd = masterSslFd; +} + +/* + * Function name: ClientRealm_set_httpProxyOptions + * Description: Set client realm's http proxy options. + * Arguments: cr - pointer to ClientRealm structure + * httpProxyOptions - client realm's http proxy options + */ + +void +ClientRealm_set_httpProxyOptions(ClientRealm* cr, HttpProxyOptions* httpProxyOptions) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->httpProxyOptions) { + HttpProxyOptions_free(&(cr->httpProxyOptions)); + } + cr->httpProxyOptions = httpProxyOptions; +} + +/* + * Function name: ClientRealm_set_arOptions + * Description: Set client realm's auto-reconnect options. + * Arguments: cr - pointer to ClientRealm structure + * arOptions - client realm's auto-reconnect options + */ + +void +ClientRealm_set_arOptions(ClientRealm* cr, ArOptions* arOptions) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->arOptions) { + ArOptions_free(&(cr->arOptions)); + } + cr->arOptions = arOptions; +} + +/* + * Function name: ClientRealm_set_usersTable + * Description: Set table of users. + * Arguments: cr - pointer to ClientRealm structure + * usersTable - table of users + */ + +void +ClientRealm_set_usersTable(ClientRealm* cr, ConnectUser** usersTable) +{ + int i; + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->usersTable) { + for (i = 0; i < cr->usersLimit; ++i) { + if (cr->usersTable[i]) { + ConnectUser_free(&(cr->usersTable[i])); + } + } + free(cr->usersTable); + cr->usersTable = NULL; + } + cr->usersTable = usersTable; +} + +#ifdef HAVE_LIBDL +/* + * Function name: ClientRealm_set_userModule + * Description: Set a module for user's packets filtering. + * Arguments: cr - pointer to ClientRealm structure + * userModule - module for user's packets filtering + */ + +void +ClientRealm_set_userModule(ClientRealm* cr, Module* userModule) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->userModule) { + Module_free(&(cr->userModule)); + } + cr->userModule = userModule; +} + +/* + * Function name: ClientRealm_set_serviceModule + * Description: Set a module for service's packets filtering. + * Arguments: cr - pointer to ClientRealm structure + * serviceModule - module for service's packets filtering + */ + +void +ClientRealm_set_serviceModule(ClientRealm* cr, Module* serviceModule) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + if (cr->serviceModule) { + Module_free(&(cr->serviceModule)); + } + cr->serviceModule = serviceModule; +} +#endif + +/* + * Function name: ClientRealm_get_serverName + * Description: Get realm's server name. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's server name. + */ + +char* +ClientRealm_get_serverName(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->serverName; +} + +/* + * Function name: ClientRealm_get_managePort + * Description: Get realm's manage port description. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's manage port description. + */ + +char* +ClientRealm_get_managePort(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->managePort; +} + +/* + * Function name: ClientRealm_get_hostName + * Description: Get realm's host name. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's host name. + */ + +char* +ClientRealm_get_hostName(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->hostName; +} + +/* + * Function name: ClientRealm_get_destinationPorts + * Description: Get realm's destination ports list. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's destination ports list. + */ + +PortList* +ClientRealm_get_destinationPorts(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->destinationPorts; +} + +/* + * Function name: ClientRealm_get_sKeepAliveTimeout + * Description: Get keep-alive timeout value description. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Keep-alive timeout value description. + */ + +char* +ClientRealm_get_sKeepAliveTimeout(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->sKeepAliveTimeout; +} + +/* + * Function name: ClientRealm_get_realmName + * Description: Get realm's name. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's name. + */ + +char* +ClientRealm_get_realmName(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->realmName; +} + +/* + * Function name: ClientRealm_get_realmId + * Description: Get realm's id. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's id. + */ + +char* +ClientRealm_get_realmId(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->realmId; +} + + +/* + * Function name: ClientRealm_get_localName + * Description: Get realm's local name. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's local name. + */ + +char* +ClientRealm_get_localName(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->localName; +} + + +/* + * Function name: ClientRealm_get_localPort + * Description: Get realm's local port description. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's local port description. + */ + +char* +ClientRealm_get_localPort(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->localPort; +} + + +/* + * Function name: ClientRealm_get_localDestinationName + * Description: Get realm's local destination name. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Realm's local destination name. + */ + +char* +ClientRealm_get_localDestinationName(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->localDestinationName; +} + +/* + * Function name: ClientRealm_get_password + * Description: Get realm's password. + * Arguments: sr - pointer to ClientRealm structure + * Returns: Realm's password. + */ + +unsigned char* +ClientRealm_get_password(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->password; +} + +/* + * Function name: ClientRealm_get_connectedUsers + * Description: Get number of connected users. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Number of connected users. + */ + +int +ClientRealm_get_connectedUsers(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return -1; + } + return cr->connectedUsers; +} + +/* + * Function name: ClientRealm_get_usersLimit + * Description: Get limit of connected users. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Limit of connected users. + */ + +int +ClientRealm_get_usersLimit(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return -1; + } + return cr->usersLimit; +} + +/* + * Function name: ClientRealm_get_keepAliveTimeout + * Description: Get keep-alive timeout value. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Keep-alive timeout value. + */ + +int +ClientRealm_get_keepAliveTimeout(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->keepAliveTimeout; +} + +/* + * Function name: ClientRealm_get_clientMode + * Description: Get client mode. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client mode. + */ + +int +ClientRealm_get_clientMode(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->clientMode; +} + +/* + * Function name: ClientRealm_get_ipFamily + * Description: Get IP family. + * Arguments: cr - pointer to ClientRealm structure + * Returns: IP family. + */ + +char +ClientRealm_get_ipFamily(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->ipFamily; +} + +/* + * Function name: ClientRealm_get_realmType + * Description: Get type of the realm. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Type of the realm. + */ + +char +ClientRealm_get_realmType(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->realmType; +} + +/* + * Function name: ClientRealm_get_tunnelType + * Description: Get type of the tunnel. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Type of the tunnel. + */ + +char +ClientRealm_get_tunnelType(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->tunnelType; +} + +/* + * Function name: ClientRealm_get_keepAlive + * Description: Get keep-alive timeval struct. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Keep-alive timeval struct. + */ + +struct timeval +ClientRealm_get_keepAlive(ClientRealm* cr) +{ + struct timeval tmp = {0, 0}; + assert(cr != NULL); + if (cr == NULL) { + return tmp; + } + return cr->keepAlive; +} + +/* + * Function name: ClientRealm_get_addressLength + * Description: Get client's address length. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client's address length. + */ + +socklen_t +ClientRealm_get_addressLength(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return 0; + } + return cr->addressLength; +} + +/* + * Function name: ClientRealm_get_clientAddress + * Description: Get client's network address. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client's network address. + */ + +struct sockaddr* +ClientRealm_get_clientAddress(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->clientAddress; +} + +/* + * Function name: ClientRealm_get_masterSslFd + * Description: Get client realm's master sslfd. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client realm's master sslfd. + */ + +SslFd* +ClientRealm_get_masterSslFd(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->masterSslFd; +} + +/* + * Function name: ClientRealm_get_httpProxyOptions + * Description: Get client realm's http proxy options. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client realm's http proxy options. + */ + +HttpProxyOptions* +ClientRealm_get_httpProxyOptions(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->httpProxyOptions; +} + +/* + * Function name: ClientRealm_get_arOptions + * Description: Get client realm's auto-reconnect options. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Client realm's auto-reconnect options. + */ + +ArOptions* +ClientRealm_get_arOptions(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->arOptions; +} + +/* + * Function name: ClientRealm_get_usersTable + * Description: Get table of users. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Table of users. + */ + +ConnectUser** +ClientRealm_get_usersTable(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->usersTable; +} + +#ifdef HAVE_LIBDL +/* + * Function name: ClientRealm_get_userModule + * Description: Get a module for user's packets filtering. + * Arguments: cr - pointer to ClientRealm structure + * Returns: A module for user's packets filtering. + */ + +Module* +ClientRealm_get_userModule(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->userModule; +} + +/* + * Function name: ClientRealm_get_serviceModule + * Description: Get a module for service's packets filtering. + * Arguments: cr - pointer to ClientRealm structure + * Returns: A module for service's packets filtering. + */ + +Module* +ClientRealm_get_serviceModule(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return cr->serviceModule; +} +#endif + +/* + * Function name: ClientRealm_increase_connectedUsers + * Description: Increase number of connected users. + * Arguments: cr - pointer to ClientRealm structure + */ + +void +ClientRealm_increase_connectedUsers(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + ClientRealm_set_connectedUsers(cr, ClientRealm_get_connectedUsers(cr) + 1); +} + +/* + * Function name: ClientRealm_decrease_connectedUsers + * Description: Decrease number of connected users. + * Arguments: cr - pointer to ClientRealm structure + */ + +void +ClientRealm_decrease_connectedUsers(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + ClientRealm_set_connectedUsers(cr, ClientRealm_get_connectedUsers(cr) - 1); +} + +/* + * Function name: ClientRealm_closeUsersConnections + * Description: Close all users' connections and free usersTable. + * Arguments: cr - pointer to ClientRealm structure + */ + +void +ClientRealm_closeUsersConnections(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return; + } + close_connections(ClientRealm_get_usersLimit(cr), &(cr->usersTable)); +} + +/* + * Function name: ClientRealm_get_keepAlivePointer + * Description: Get pointer to keep-alive structure. + * Arguments: cr - pointer to ClientRealm structure + * Returns: Pointer to keep-alive structure. + */ + +struct timeval* +ClientRealm_get_keepAlivePointer(ClientRealm* cr) +{ + assert(cr != NULL); + if (cr == NULL) { + return NULL; + } + return (&(cr->keepAlive)); +} + +/* + * Function name: ClientRealm_send_realmId + * Description: Sends the realm's id to the afserver. + * Arguments: cr - pointer to ClientRealm structure + * buff - buffer used for message creation + */ + +void +ClientRealm_send_realmId(ClientRealm* cr, unsigned char* buff) +{ + int n; + assert(cr != NULL); + if (cr == NULL) { + return; + } + assert(buff != NULL); + if (buff == NULL) { + return; + } + if (ClientRealm_get_realmId(cr) != NULL) { + buff[0] = AF_S_LOGIN; + buff[1] = buff[2] = 0; + n = strlen(ClientRealm_get_realmId(cr)); + memcpy(&buff[5], ClientRealm_get_realmId(cr), n); + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(ClientRealm_get_realmType(cr), + ClientRealm_get_masterSslFd(cr), buff, n+5); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "ID SENT: %s", ClientRealm_get_realmId(cr)); + } +} + +/* + * Function name: ClientRealm_enable_multi + * Description: Enables the MULTI mode on the afserver, if supported. + * Arguments: cr - pointer to ClientRealm structure + */ + +void +ClientRealm_enable_multi(ClientRealm* cr) +{ + unsigned char buff[5]; + assert(cr != NULL); + if (cr == NULL) { + return; + } + if ((TYPE_IS_SUPPORTED_MULTI(ClientRealm_get_realmType(cr))) && + (PortList_get_size(ClientRealm_get_destinationPorts(cr)) > 1)) { + buff[0] = AF_S_ENABLE_MULTI; + buff[1] = PortList_get_size(ClientRealm_get_destinationPorts(cr)); + buff[2] = buff[3] = buff[4] = 0; + SslFd_send_message(ClientRealm_get_realmType(cr), + ClientRealm_get_masterSslFd(cr), buff, 5); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "ENABLED: MULTI (multiple tunnels managed by one afclient)"); + } +} diff --git a/src/client_realm_struct.h b/src/client_realm_struct.h new file mode 100644 index 0000000..0fd1789 --- /dev/null +++ b/src/client_realm_struct.h @@ -0,0 +1,146 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "ssl_fd_struct.h" +#include "http_proxy_options_struct.h" +#include "ar_options_struct.h" +#include "module_struct.h" +#include "port_list_struct.h" + +#ifndef _JS_CLIENT_REALM_STRUCT_H +#define _JS_CLIENT_REALM_STRUCT_H + +#define CLIENTREALM_MODE_UNKNOWN -1 +#define CLIENTREALM_MODE_TCP 0 +#define CLIENTREALM_MODE_UDP 1 +#define CLIENTREALM_MODE_REMOTE 2 +#define CLIENTREALM_MODE_REVERSE 3 + +#define CLIENTREALM_TUNNELTYPE_UNKNOWN -1 +#define CLIENTREALM_TUNNELTYPE_DIRECT 0 +#define CLIENTREALM_TUNNELTYPE_HTTPPROXY 1 +#define CLIENTREALM_TUNNELTYPE_HTTPSPROXY 2 + +typedef struct { + char* serverName; + char* managePort; + char* hostName; + char* realmName; + char* sKeepAliveTimeout; + char* realmId; + char* localName; + char* localPort; + char* localDestinationName; + unsigned char password[4]; + int connectedUsers; + int usersLimit; + int clientMode; + int keepAliveTimeout; + char ipFamily; + char realmType; + char tunnelType; + struct timeval keepAlive; + socklen_t addressLength; + struct sockaddr* clientAddress; + SslFd* masterSslFd; + HttpProxyOptions* httpProxyOptions; + ArOptions* arOptions; + PortList* destinationPorts; + ConnectUser** usersTable; +#ifdef HAVE_LIBDL + Module* userModule; + Module* serviceModule; +#endif +} ClientRealm; + +/* 'constructor' */ +ClientRealm* ClientRealm_new(); +/* 'destructor' */ +void ClientRealm_free(ClientRealm** cr); +/* setters */ +void ClientRealm_set_serverName(ClientRealm* cr, char* serverName); +void ClientRealm_set_managePort(ClientRealm* cr, char* managePort); +void ClientRealm_set_hostName(ClientRealm* cr, char* hostName); +void ClientRealm_set_realmName(ClientRealm* cr, char* realmName); +void ClientRealm_set_sKeepAliveTimeout(ClientRealm* cr, char* sKeepAliveTimeout); +void ClientRealm_set_realmId(ClientRealm* cr, char* realmId); +void ClientRealm_set_localName(ClientRealm* cr, char* localName); +void ClientRealm_set_localPort(ClientRealm* cr, char* localPort); +void ClientRealm_set_localDestinationName(ClientRealm* cr, char* localDestinationName); +void ClientRealm_set_password(ClientRealm* cr, unsigned char* password); +void ClientRealm_set_connectedUsers(ClientRealm* cr, int connectedUsers); +void ClientRealm_set_usersLimit(ClientRealm* cr, int usersLimit); +void ClientRealm_set_keepAliveTimeout(ClientRealm* cr, int keepAliveTimeout); +void ClientRealm_set_clientMode(ClientRealm* cr, int clientMode); +void ClientRealm_set_ipFamily(ClientRealm* cr, char ipFamily); +void ClientRealm_set_realmType(ClientRealm* cr, char realmType); +void ClientRealm_set_tunnelType(ClientRealm* cr, char tunnelType); +void ClientRealm_set_keepAlive(ClientRealm* cr, struct timeval keepAlive); +void ClientRealm_set_addressLength(ClientRealm* cr, socklen_t addressLength); +void ClientRealm_set_clientAddress(ClientRealm* cr, struct sockaddr* clientAddress); +void ClientRealm_set_masterSslFd(ClientRealm* cr, SslFd* masterSslFd); +void ClientRealm_set_httpProxyOptions(ClientRealm* cr, HttpProxyOptions* httpProxyOptions); +void ClientRealm_set_arOptions(ClientRealm* cr, ArOptions* arOptions); +void ClientRealm_set_destinationPorts(ClientRealm* cr, PortList* destinationPorts); +void ClientRealm_set_usersTable(ClientRealm* cr, ConnectUser** usersTable); +#ifdef HAVE_LIBDL +void ClientRealm_set_userModule(ClientRealm* cr, Module* userModule); +void ClientRealm_set_serviceModule(ClientRealm* cr, Module* serviceModule); +#endif +/* getters */ +char* ClientRealm_get_serverName(ClientRealm* cr); +char* ClientRealm_get_managePort(ClientRealm* cr); +char* ClientRealm_get_hostName(ClientRealm* cr); +char* ClientRealm_get_realmName(ClientRealm* cr); +char* ClientRealm_get_sKeepAliveTimeout(ClientRealm* cr); +char* ClientRealm_get_realmId(ClientRealm* cr); +char* ClientRealm_get_localName(ClientRealm* cr); +char* ClientRealm_get_localPort(ClientRealm* cr); +char* ClientRealm_get_localDestinationName(ClientRealm* cr); +unsigned char* ClientRealm_get_password(ClientRealm* cr); +int ClientRealm_get_connectedUsers(ClientRealm* cr); +int ClientRealm_get_usersLimit(ClientRealm* cr); +int ClientRealm_get_keepAliveTimeout(ClientRealm* cr); +int ClientRealm_get_clientMode(ClientRealm* cr); +char ClientRealm_get_ipFamily(ClientRealm* cr); +char ClientRealm_get_realmType(ClientRealm* cr); +char ClientRealm_get_tunnelType(ClientRealm* cr); +struct timeval ClientRealm_get_keepAlive(ClientRealm* cr); +socklen_t ClientRealm_get_addressLength(ClientRealm* cr); +struct sockaddr* ClientRealm_get_clientAddress(ClientRealm* cr); +SslFd* ClientRealm_get_masterSslFd(ClientRealm* cr); +HttpProxyOptions* ClientRealm_get_httpProxyOptions(ClientRealm* cr); +ArOptions* ClientRealm_get_arOptions(ClientRealm* cr); +PortList* ClientRealm_get_destinationPorts(ClientRealm* cr); +ConnectUser** ClientRealm_get_usersTable(ClientRealm* cr); +#ifdef HAVE_LIBDL +Module* ClientRealm_get_userModule(ClientRealm* cr); +Module* ClientRealm_get_serviceModule(ClientRealm* cr); +#endif +/* other */ +void ClientRealm_increase_connectedUsers(ClientRealm* cr); +void ClientRealm_decrease_connectedUsers(ClientRealm* cr); +void ClientRealm_closeUsersConnections(ClientRealm* cr); +struct timeval* ClientRealm_get_keepAlivePointer(ClientRealm* cr); +void ClientRealm_send_realmId(ClientRealm* cr, unsigned char* buff); +void ClientRealm_enable_multi(ClientRealm* cr); + +#endif diff --git a/src/client_remoteadmin.c b/src/client_remoteadmin.c new file mode 100644 index 0000000..bcac860 --- /dev/null +++ b/src/client_remoteadmin.c @@ -0,0 +1,210 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "client_remoteadmin.h" + +/* + * Function name: client_admin + * Description: This function is responsible for client part of the admin panel. + * Arguments: type - the type of the realm + * master - pointer to the SslFd structure representing the connection with afserver + * buff - buffer which will be used for communication + * connectfd - the optional descriptor which can be used instead of the stdin + * id - the realm's id + * Returns: 0 - connection was closed normally, + * 1 - something went bad. + */ + +int +client_admin(char type, SslFd* master, unsigned char* buff, int connectfd, char* id) +{ + fd_set rset, allset; + int maxfdp1, n, length, infd; + FILE *outfp, *infp; + + buff[0] = AF_S_ADMIN_LOGIN; + SslFd_send_message(type, master, buff, 5); + buff[0] = 0; + SslFd_get_message(type, master, buff, -5); + + if ( buff[0] == 0 ) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Wrong password"); + return 1; + } + if ( buff[0] == AF_S_CANT_OPEN ) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Server is full"); + return 1; + } + if ( buff[0] != AF_S_ADMIN_LOGIN ) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Incompatible server type or server full"); + return 1; + } + + aflog(LOG_T_MAIN, LOG_I_INFO, + "CLIENT STARTED mode: remote administration"); + + if (connectfd > 0) { + outfp = fdopen(connectfd, "w"); + if (outfp == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Error in opening file descriptor for writing"); + return 1; + } + infd = connectfd; + } + else { + infd = STDIN_FILENO; + outfp = stdout; + } + infp = fdopen(infd, "r"); + if (infp == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Error in opening file descriptor for reading"); + return 1; + } + + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + n = SslFd_get_message(type, master, buff, length); + buff[n] = 0; + fprintf(outfp, "%s\n", (char*) buff); + fflush(outfp); + + FD_ZERO(&allset); + + FD_SET(SslFd_get_fd(master), &allset); + FD_SET(infd, &allset); + + maxfdp1 = (infd > SslFd_get_fd(master)) ? infd + 1 : SslFd_get_fd(master) + 1; + + if (id != NULL) { + buff[0] = AF_S_LOGIN; + buff[1] = buff[2] = 0; + n = strlen(id); + memcpy(&buff[5], id, n); + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(type, master, buff, n+5); + aflog(LOG_T_MANAGE, LOG_I_INFO, + "ID SENT: %s", id); + } + + while (1) { + rset = allset; + select(maxfdp1, &rset, NULL, NULL, NULL); + + if (FD_ISSET(SslFd_get_fd(master), &rset)) { + aflog(LOG_T_MANAGE, LOG_I_DEBUG, + "masterfd: FD_ISSET"); + n = SslFd_get_message(type, master, buff, 5); + if (n != 5) { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "FATAL ERROR! (%d)", n); + if (n == -1) { + if (TYPE_IS_SSL(type)) { + get_ssl_error(master, "FE", n); + continue; /* what happened? */ + } + } + if (n != 0) + return 1; + } + if (n == 0) { /* server quits -> we do the same... */ + aflog(LOG_T_MANAGE, LOG_I_CRIT, + "SERVER: premature quit --> exiting..."); + return 1; + } + if (buff[0] == AF_S_CLOSING) { + aflog(LOG_T_MANAGE, LOG_I_CRIT, + "SERVER: CLOSED -> exiting... cg: %ld bytes", getcg()); + return 0; + } + if (buff[0] != AF_S_ADMIN_CMD) { + aflog(LOG_T_MANAGE, LOG_I_CRIT, + "SERVER: wrong message --> exiting"); + return 1; + } + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + + switch (buff[1]) { + case AF_RA_STATUS_OK: { + aflog(LOG_T_MANAGE, LOG_I_INFO, + "SERVER: cmd successful"); + } + case AF_RA_FAILED: { + if (buff[1] == AF_RA_FAILED) { + aflog(LOG_T_MANAGE, LOG_I_INFO, + "SERVER: cmd failed"); + } + } + case AF_RA_UNDEFINED: { + if (buff[1] == AF_RA_UNDEFINED) { + aflog(LOG_T_MANAGE, LOG_I_WARNING, + "SERVER: unknown cmd"); + } + n = SslFd_get_message(type, master, buff, length); + buff[n] = 0; + fprintf(outfp, "%s", (char*) buff); + fflush(outfp); + break; + } + case AF_RA_KICKED: { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "SERVER: kicked us -> exiting... cg: %ld bytes", getcg()); + return 1; + break; + } + default: { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "SERVER: unrecognized message -> exiting... cg: %ld bytes", getcg()); + return 1; + } + } + } + + if (FD_ISSET(infd, &rset)) { + aflog(LOG_T_MANAGE, LOG_I_DEBUG, + "infd: FD_ISSET"); + if (fgets((char*) &buff[5], 8091, infp) == NULL) { /* client quits --> exiting */ + aflog(LOG_T_MANAGE, LOG_I_NOTICE, + "CLIENT CLOSED cg: %ld bytes", getcg()); + return 0; + } + n = strlen((char*) &buff[5]); + if ((n > 0) && (buff[n+4] == '\n')) { + --n; + } + buff[0] = AF_S_ADMIN_CMD; + buff[1] = AF_RA_CMD; + buff[2] = AF_RA_UNDEFINED; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(type, master, buff, n+5); + } + } +} diff --git a/src/client_remoteadmin.h b/src/client_remoteadmin.h new file mode 100644 index 0000000..f20af13 --- /dev/null +++ b/src/client_remoteadmin.h @@ -0,0 +1,38 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_CLIENT_REMOTEADMIN_H +#define _JS_CLIENT_REMOTEADMIN_H + +#include <stdlib.h> +#include <string.h> + +#include "remoteadmin_codes.h" +#include "activefor.h" +#include "network.h" +#include "logging.h" +#include "stats.h" +#include "make_ssl_handshake.h" +#include "ssl_fd_struct.h" + +int client_admin(char, SslFd*, unsigned char*, int, char*); + +#endif + diff --git a/src/client_reverse_udp.c b/src/client_reverse_udp.c new file mode 100644 index 0000000..882a6f9 --- /dev/null +++ b/src/client_reverse_udp.c @@ -0,0 +1,213 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "client_reverse_udp.h" + +#include <stdlib.h> + +/* + * Function name: initialize_client_reverse_udp + * Description: Initializes the realm for reverse udp connection. + * Arguments: cr - pointer to ClientRealm structure + * Returns: 0 - connection was initialized successfully, + * 1 - connection initialization failed. + */ + +int +initialize_client_reverse_udp(ClientRealm* cr) +{ + int tmp; + int wanttoexit = (ArOptions_get_arStart(ClientRealm_get_arOptions(cr)) == AR_OPTION_ENABLED) ? 0 : 1; + ClientRealm_set_usersLimit(cr, 1); + if (ip_connect(&tmp, ClientRealm_get_serverName(cr), + ClientRealm_get_managePort(cr), + ClientRealm_get_ipFamily(cr), NULL, NULL)) { +#ifdef AF_INET6 + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_connect_%s error for %s, %s", + (ClientRealm_get_ipFamily(cr) & 0x02) ? + "ipv4" : (ClientRealm_get_ipFamily(cr) & 0x04) ? + "ipv6":"unspec", ClientRealm_get_serverName(cr), ClientRealm_get_managePort(cr)); +#else + aflog(LOG_T_INIT, LOG_I_CRIT, + "tcp_connect error for %s, %s", ClientRealm_get_serverName(cr), ClientRealm_get_managePort(cr)); +#endif + if (wanttoexit) { + exit(1); + } + else { + return 1; + } + + } + SslFd_set_fd(ClientRealm_get_masterSslFd(cr), tmp); + SslFd_set_ssl(ClientRealm_get_masterSslFd(cr), NULL); + return 0; +} + +/* + * Function name: client_reverse_udp + * Description: This function is responsible for the client part of the reverse udp tunnel. + * Arguments: cr - pointer to ClientRealm structure + * buff - buffer which will be used for communication + * buflength - socket send buffer size + */ + +void +client_reverse_udp(ClientRealm* cr, unsigned char* buff, int buflength) +{ + socklen_t len, addrlen; + int maxfdp1, temp, n, length; +#ifdef HAVE_LINUX_SOCKIOS_H + int notsent; +#endif + struct sockaddr* cliaddr; + fd_set rset, allset; + + if (ip_listen(&temp, ClientRealm_get_hostName(cr), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(cr), 0)), &addrlen, + ClientRealm_get_ipFamily(cr) & 0xfe)) { +#ifdef AF_INET6 + aflog(LOG_T_INIT, LOG_I_DEBUG, + "udp_listen_%s error for %s, %s", + (ClientRealm_get_ipFamily(cr) & 0x02) ? + "ipv4":(ClientRealm_get_ipFamily(cr) & 0x04) ? + "ipv6":"unspec", ClientRealm_get_hostName(cr), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(cr), 0))); +#else + aflog(LOG_T_INIT, LOG_I_DEBUG, + "udp_listen error for %s, %s", ClientRealm_get_hostName(cr), + PortListNode_get_portName(PortList_get_nth(ClientRealm_get_destinationPorts(cr), 0))); +#endif + exit(1); + } + ConnectUser_set_connFd(ClientRealm_get_usersTable(cr)[0], temp); + cliaddr = malloc(addrlen); + FD_ZERO(&allset); + + FD_SET(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), &allset); + maxfdp1 = SslFd_get_fd(ClientRealm_get_masterSslFd(cr)) + 1; + maxfdp1 = (maxfdp1 > (ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]) + 1)) ? + maxfdp1 : (ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]) + 1); + FD_SET(ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]), &allset); + aflog(LOG_T_CLIENT, LOG_I_INFO, + "CLIENT STARTED mode: udp reverse"); + for ( ; ; ) { + len = 4; + if (getsockopt(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), SOL_SOCKET, SO_SNDBUF, &temp, &len) != -1) { + if (temp != buflength) { + buflength = temp; + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "Send buffer size changed..."); + } + } + len = addrlen; + rset = allset; + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "select"); + select(maxfdp1, &rset, NULL, NULL, NULL); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "after select..."); + + if (FD_ISSET(ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]), &rset)) { /* FD_ISSET CONTABLE[0].CONNFD RSET*/ + n = recvfrom(ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]), &buff[5], 8091, 0, cliaddr, &len); +#ifdef HAVE_LINUX_SOCKIOS_H +# ifdef SIOCOUTQ + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "SIOCOUTQ is defined"); + if (ioctl(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), SIOCOUTQ, ¬sent)) { + aflog(LOG_T_CLIENT, LOG_I_CRIT, + "ioctl error -> exiting..."); + exit(1); + } + if (buflength <= notsent + n + 5) { /* when we can't do this */ + aflog(LOG_T_CLIENT, LOG_I_INFO, + "drop: size:%d, buf:%d, w:%d/%d", n, buflength, notsent, buflength); +# else + aflog(LOG_T_MAIN< LOG_I_DDEBUG, + "TIOCOUTQ is defined"); + if (ioctl(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), TIOCOUTQ, ¬sent)) { + aflog(LOG_T_CLIENT, LOG_I_CRIT, + "ioctl error -> exiting..."); + exit(1); + } + if (notsent <= n + 5) { /* when we can't do this */ + aflog(LOG_T_CLIENT, LOG_I_INFO, + "drop: size:%d, buf:%d, w:%d/%d", n, buflength, buflength - notsent, buflength); +# endif + } + else { +#endif + if (n > 0) { +#ifdef HAVE_LINUX_SOCKIOS_H + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Sending %d bytes to service (w:%d/%d) (FROM:%s)", n, +# ifdef SIOCOUTQ + notsent +# else + buflength - notsent +# endif + , buflength, sock_ntop(cliaddr, len, NULL, NULL, 0)); +#else + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Sending %d bytes to service (FROM:%s)", n, sock_ntop(cliaddr, len, NULL, NULL, 0)); +#endif + buff[0] = AF_S_MESSAGE; + buff[1] = AF_S_LOGIN; + buff[2] = AF_S_MESSAGE; + buff[3] = n >> 8; + buff[4] = n; + writen(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), buff, n + 5); + } +#ifdef HAVE_LINUX_SOCKIOS_H + } +#endif + } /* - FD_ISSET CONTABLE[0].CONNFD RSET */ + + if (FD_ISSET(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), &rset)) { /* FD_ISSET MASTER.COMMFD RSET */ + n = readn(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), buff, 5); + if (n == 5) { + if ((buff[0] != AF_S_MESSAGE) || (buff[1] != AF_S_LOGIN) || (buff[2] != AF_S_MESSAGE)) { + aflog(LOG_T_CLIENT, LOG_I_CRIT, + "Incompatible server type (not udp?) or data corruption -> exiting..."); + exit(1); + } + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is length of message */ + n = readn(SslFd_get_fd(ClientRealm_get_masterSslFd(cr)), buff, length); + } + else { + n = 0; + } + if (n == 0) { /* server quits -> we do the same... */ + aflog(LOG_T_CLIENT, LOG_I_CRIT, + "premature quit of the server -> exiting..."); + exit(1); + } + aflog(LOG_T_CLIENT, LOG_I_INFO, + "Sending %d bytes to user (TO:%s)", n, sock_ntop(cliaddr, addrlen, NULL, NULL, 0)); + sendto(ConnectUser_get_connFd(ClientRealm_get_usersTable(cr)[0]), buff, n, 0, cliaddr, addrlen); + } /* - FD_ISSET MASTER.COMMFD RSET */ + } + exit(0); /* we shouldn't get here */ +} diff --git a/src/client_reverse_udp.h b/src/client_reverse_udp.h new file mode 100644 index 0000000..b1f9590 --- /dev/null +++ b/src/client_reverse_udp.h @@ -0,0 +1,41 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#ifdef HAVE_LINUX_SOCKIOS_H +#include <linux/sockios.h> +#endif + +#ifndef _JS_CLIENT_REVERSE_UDP_H +#define _JS_CLIENT_REVERSE_UDP_H + +#include <sys/ioctl.h> + +#include "activefor.h" +#include "stats.h" +#include "logging.h" +#include "ssl_fd_struct.h" +#include "client_realm_struct.h" + +int initialize_client_reverse_udp(ClientRealm* cr); +void client_reverse_udp(ClientRealm* cr, unsigned char* buff, int buflength); + +#endif diff --git a/src/client_shutdown.c b/src/client_shutdown.c new file mode 100644 index 0000000..1847899 --- /dev/null +++ b/src/client_shutdown.c @@ -0,0 +1,48 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> + +#include "client_shutdown.h" + +void +close_connections(int usernum, ConnectUser*** contable) +{ + int i; + + assert(contable != NULL); + if (contable == NULL) { + return; + } + + if (*contable) { + for (i = 0; i < usernum; ++i) { + if ((ConnectUser_get_state((*contable)[i]) == S_STATE_OPEN) || + (ConnectUser_get_state((*contable)[i]) == S_STATE_STOPPED)) { + close(ConnectUser_get_connFd((*contable)[i])); + } + ConnectUser_free(&(*contable)[i]); + } + free(*contable); + (*contable) = NULL; + } +} + diff --git a/src/client_shutdown.h b/src/client_shutdown.h new file mode 100644 index 0000000..959fae0 --- /dev/null +++ b/src/client_shutdown.h @@ -0,0 +1,30 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#ifndef _JS_CLIENT_SHUTDOWN_H +#define _JS_CLIENT_SHUTDOWN_H + +#include "activefor.h" + +void close_connections(int usernum, ConnectUser*** contable); + +#endif diff --git a/src/client_signals.c b/src/client_signals.c new file mode 100644 index 0000000..04c344e --- /dev/null +++ b/src/client_signals.c @@ -0,0 +1,60 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "client_signals.h" +#include "thread_management.h" +#include "stats.h" +#include "logging.h" + +#include <stdlib.h> + +/* + * Function name: client_sig_int + * Description: Function responsible for handling SIG_INT. + * Arguments: signo - the signal number + */ + +void +client_sig_int(int signo) +{ +#ifdef HAVE_LIBPTHREAD + if (!is_this_a_mainthread()) { + return; + } +#endif + aflog(LOG_T_MAIN, LOG_I_NOTICE, + "CLIENT CLOSED cg: %ld bytes", getcg()); + exit(0); +} + +/* + * Function name: client_sig_alrm + * Description: Function responsible for handling SIG_ALRM. + * Arguments: signo - the signal number + */ + +void +client_sig_alrm(int signo) +{ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "Received SIGALRM"); +} diff --git a/src/client_signals.h b/src/client_signals.h new file mode 100644 index 0000000..03c14cf --- /dev/null +++ b/src/client_signals.h @@ -0,0 +1,28 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_CLIENT_SIGNALS_H +#define _JS_CLIENT_SIGNALS_H + +void client_sig_int(int); /* INT signal handler for the afclient */ +void client_sig_alrm(int); /* ALRM signal handler for the afclient */ + +#endif + diff --git a/src/clientnames.c b/src/clientnames.c new file mode 100644 index 0000000..750b9c9 --- /dev/null +++ b/src/clientnames.c @@ -0,0 +1,173 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdio.h> +#include <string.h> +#include <assert.h> +#include "clientnames.h" + +char* +get_clientname(ServerRealm* pointer, int client) +{ + static char clientname[10]; + + assert(pointer != NULL); + if (pointer == NULL) { + return NULL; + } + + if (ConnectClient_get_sClientId(ServerRealm_get_clientsTable(pointer)[client]) == NULL) { + memset(clientname, 0, 10); + sprintf(clientname, "%d", ConnectClient_get_clientId(ServerRealm_get_clientsTable(pointer)[client])); + return clientname; + } + + return ConnectClient_get_sClientId(ServerRealm_get_clientsTable(pointer)[client]); +} + +int +get_clientid(ServerRealm* pointer, char* clientname) +{ + int i, n; + char guard; + + assert(pointer != NULL); + if (pointer == NULL) { + return -1; + } + + assert(clientname != NULL); + if (clientname == NULL) { + return -1; + } + + for (i = 0; i < ServerRealm_get_clientsLimit(pointer); ++i) { + if (ConnectClient_get_sClientId(ServerRealm_get_clientsTable(pointer)[i]) != NULL) { + if (strcmp(clientname, ConnectClient_get_sClientId(ServerRealm_get_clientsTable(pointer)[i])) == 0) { + return ConnectClient_get_clientId(ServerRealm_get_clientsTable(pointer)[i]); + } + } + } + + if (sscanf(clientname, "%d%c", &i, &guard) == 1) { + n = get_clientnumber(pointer, i); + if ((n >= 0) && (n < ServerRealm_get_clientsLimit(pointer))) { + if (ConnectClient_get_sClientId(ServerRealm_get_clientsTable(pointer)[n]) == NULL) { + return i; + } + } + } + return -1; +} + +int +get_clientnumber(ServerRealm* pointer, int clientid) +{ + int i; + + assert(pointer != NULL); + if (pointer == NULL) { + return -1; + } + + for (i = 0; i < ServerRealm_get_clientsLimit(pointer); ++i) { + if (ConnectClient_get_clientId(ServerRealm_get_clientsTable(pointer)[i]) == clientid) { + return i; + } + } + + return -1; +} + +char* +get_raclientname(ServerRealm* pointer, int client) +{ + static char clientname[10]; + + assert(pointer != NULL); + if (pointer == NULL) { + return NULL; + } + + if (ConnectClient_get_sClientId(ServerRealm_get_raClientsTable(pointer)[client]) == NULL) { + memset(clientname, 0, 10); + sprintf(clientname, "%d", ConnectClient_get_clientId(ServerRealm_get_raClientsTable(pointer)[client])); + return clientname; + } + + return ConnectClient_get_sClientId(ServerRealm_get_raClientsTable(pointer)[client]); +} + +int +get_raclientid(ServerRealm* pointer, char* clientname) +{ + int i, n; + char guard; + + assert(pointer != NULL); + if (pointer == NULL) { + return -1; + } + + assert(clientname != NULL); + if (clientname == NULL) { + return -1; + } + + for (i = 0; i < ServerRealm_get_raClientsLimit(pointer); ++i) { + if (ConnectClient_get_sClientId(ServerRealm_get_raClientsTable(pointer)[i]) != NULL) { + if (strcmp(clientname, ConnectClient_get_sClientId(ServerRealm_get_raClientsTable(pointer)[i])) == 0) { + return ConnectClient_get_clientId(ServerRealm_get_raClientsTable(pointer)[i]); + } + } + } + + if (sscanf(clientname, "%d%c", &i, &guard) == 1) { + n = get_raclientnumber(pointer, i); + if ((n >= 0) && (n < ServerRealm_get_raClientsLimit(pointer))) { + if (ConnectClient_get_sClientId(ServerRealm_get_raClientsTable(pointer)[n]) == NULL) { + return i; + } + } + } + + return -1; +} + +int +get_raclientnumber(ServerRealm* pointer, int clientid) +{ + int i; + + assert(pointer != NULL); + if (pointer == NULL) { + return -1; + } + + for (i = 0; i < ServerRealm_get_raClientsLimit(pointer); ++i) { + if (ConnectClient_get_clientId(ServerRealm_get_raClientsTable(pointer)[i]) == clientid) { + return i; + } + } + + return -1; +} diff --git a/src/clientnames.h b/src/clientnames.h new file mode 100644 index 0000000..9f93596 --- /dev/null +++ b/src/clientnames.h @@ -0,0 +1,36 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "server_realm_struct.h" + +#ifndef _JS_CLIENTNAMES_H +#define _JS_CLIENTNAMES_H + +char* get_clientname(ServerRealm*, int); +int get_clientid(ServerRealm*, char*); +int get_clientnumber(ServerRealm*, int); + +char* get_raclientname(ServerRealm*, int); +int get_raclientid(ServerRealm*, char*); +int get_raclientnumber(ServerRealm*, int); + +#endif + diff --git a/src/connect_client_struct.c b/src/connect_client_struct.c new file mode 100644 index 0000000..7d57b4b --- /dev/null +++ b/src/connect_client_struct.c @@ -0,0 +1,863 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "string_functions.h" +#include "timeval_functions.h" +#include "connect_client_struct.h" + +/* + * Function name: ConnectClient_new + * Description: Creates and initializes new ConnectClient structure. + * Returns: Pointer to newly created ConnectClient structure. + */ + +ConnectClient* +ConnectClient_new() +{ + ConnectClient* tmp = calloc(1, sizeof(ConnectClient)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->sslFd = SslFd_new(); + assert(tmp->sslFd != NULL); + if (tmp->sslFd == NULL) { + ConnectClient_free(&tmp); + return NULL; + } + tmp->auditList = AuditList_new(); + assert(tmp->auditList != NULL); + if (tmp->auditList == NULL) { + ConnectClient_free(&tmp); + return NULL; + } + tmp->header = HeaderBuffer_new(); + assert(tmp->header != NULL); + if (tmp->header == NULL) { + ConnectClient_free(&tmp); + return NULL; + } + return tmp; +} + +/* + * Function name: ConnectClient_free + * Description: Frees the memory allocated for ConnectClient structure. + * Arguments: cc - pointer to pointer to ConnectClient structure + */ + +void +ConnectClient_free(ConnectClient** cc) +{ + SslFd* sftmp; + AuditList* altmp; + assert(cc != NULL); + if (cc == NULL) { + return; + } + assert((*cc) != NULL); + if ((*cc) == NULL) { + return; + } + sftmp = ConnectClient_get_sslFd((*cc)); + altmp = ConnectClient_get_auditList((*cc)); + SslFd_free(&sftmp); + AuditList_free(&altmp); + if ((*cc)->users) { + free((*cc)->users); + (*cc)->users = NULL; + } + if ((*cc)->sClientId) { + free((*cc)->sClientId); + (*cc)->sClientId = NULL; + } + free((*cc)); + (*cc) = NULL; +} + +/* + * Function name: ConnectClient_set_state + * Description: Sets state of the connected client. + * Arguments: cc - pointer to ConnectClient structure + * state - state of the connected client + */ + +void +ConnectClient_set_state(ConnectClient* cc, char state) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->state = state; +} + +/* + * Function name: ConnectClient_set_sslFd + * Description: Sets SslFd structure. + * Arguments: cc - pointer to ConnectClient structure + * sf - SslFd structure + */ + +void +ConnectClient_set_sslFd(ConnectClient* cc, SslFd* sf) +{ + SslFd* sftmp; + assert(cc != NULL); + if (cc == NULL) { + return; + } + sftmp = ConnectClient_get_sslFd(cc); + SslFd_free(&sftmp); + cc->sslFd = sf; +} + +/* + * Function name: ConnectClient_set_timer + * Description: Sets timer of the client used for internal time counting. + * Arguments: cc - pointer to ConnectClient structure + * timer - timer of the client used for internal time counting + */ + +void +ConnectClient_set_timer(ConnectClient* cc, struct timeval timer) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->timer = timer; +} + +/* + * Function name: ConnectClient_set_users + * Description: Sets users descriptor table. + * Arguments: cc - pointer to ConnectClient structure + * users - users descriptor table + */ + +void +ConnectClient_set_users(ConnectClient* cc, int* users) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + if (cc->users) { + free(cc->users); + } + cc->users = users; +} + +/* + * Functions name: ConnectClient_set_connected + * Description: Sets number of connected users. + * Arguments: cc - pointer to ConnectClient structure + * connected - number of connected users + */ + +void +ConnectClient_set_connected(ConnectClient* cc, int connected) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->connected = connected; +} + +/* + * Function name: ConnectClient_set_limit + * Description: Sets limit of connected users. + * Arguments: cc - pointer to ConnectClient structure + * limit - limit of connected users + */ + +void +ConnectClient_set_limit(ConnectClient* cc, int limit) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->limit = limit; +} + +/* + * Function name: ConnectClient_set_listenFd + * Description: Sets listen socket descriptor. + * Arguments: cc - pointer to ConnectClient structure + * listenFd - listen socket descriptor + */ + +void +ConnectClient_set_listenFd(ConnectClient* cc, int listenFd) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->listenFd = listenFd; +} + +/* + * Function name: ConnectClient_set_usrCliPair + * Description: Sets user-client pair number. + * Arguments: cc - pointer to ConnectClient structure + * usrCliPair - user-client pair number + */ + +void +ConnectClient_set_usrCliPair(ConnectClient* cc, int usrCliPair) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->usrCliPair = usrCliPair; +} + +/* + * Function name: ConnectClient_set_clientId + * Description: Sets client identification number. + * Arguments: cc - pointer to ConnectClient structure + * clientId - client identification number + */ + +void +ConnectClient_set_clientId(ConnectClient* cc, int clientId) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->clientId = clientId; +} + +/* + * Function name: ConnectClient_set_connectTime + * Description: Sets start time of the connection. + * Arguments: cc - pointer to ConnectClient structure + * connectTime - start time of the connection + */ + +void +ConnectClient_set_connectTime(ConnectClient* cc, time_t connectTime) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->connectTime = connectTime; +} + +/* + * Function name: ConnectClient_set_lastActivity + * Description: Sets time of the last client activity (when last packet from afclient has arrived) + * Arguments: cc - pointer to ConnectClient structure + * lastActivity - time of the last client activity + */ + +void +ConnectClient_set_lastActivity(ConnectClient* cc, time_t lastActivity) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->lastActivity = lastActivity; +} + +/* + * Function name: ConnectClient_set_sClientId + * Description: Sets client identification string. + * Arguments: cc - pointer to ConnectClient structure + * sClientId - client identification string + */ + +void +ConnectClient_set_sClientId(ConnectClient* cc, char* sClientId) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + string_cp(&(cc->sClientId), sClientId); +} + +/* + * Function name: ConnectClient_set_nameBuf + * Description: Sets name of the client. + * Arguments: cc - pointer to ConnectClient structure + * nameBuf - name of the client + */ + +void +ConnectClient_set_nameBuf(ConnectClient* cc, char* nameBuf) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + memset(cc->nameBuf, 0, 128); + strncpy(cc->nameBuf, nameBuf, 127); +} + +/* + * Function name: ConnectClient_set_portBuf + * Description: Sets port from which client is connected. + * Arguments: cc - pointer to ConnectClient structure + * portBuf - port from which client is connected + */ + +void +ConnectClient_set_portBuf(ConnectClient* cc, char* portBuf) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + memset(cc->portBuf, 0, 7); + strncpy(cc->portBuf, portBuf, 6); +} + +/* + * Function name: ConnectClient_set_tunnelType + * Description: Sets tupe of the client tunnel. + * Arguments: cc - pointer to ConnectClient structure + * tunnelType - tupe of the client tunnel + */ + +void +ConnectClient_set_tunnelType(ConnectClient* cc, char tunnelType) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + cc->tunnelType = tunnelType; +} + +/* + * Function name: ConnectClient_set_multi + * Description: Sets the status of the multi option. + * Arguments: cc - pointer to ConnectClient structure + * multi - the status of the multi option + */ + +void +ConnectClient_set_multi(ConnectClient* cc, char multi) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + assert((multi == CONNECTCLIENT_MULTI_ENABLED) || (multi == CONNECTCLIENT_MULTI_DISABLED)); + cc->multi = multi; +} + +/* + * Function name: ConnectClient_set_auditList + * Description: Sets audit list for the audit feature. + * Arguments: cc - pointer to ConnectClient structure + * al - audit list for the audit feature + */ + +void +ConnectClient_set_auditList(ConnectClient* cc, AuditList* al) +{ + AuditList* altmp; + assert(cc != NULL); + if (cc == NULL) { + return; + } + altmp = ConnectClient_get_auditList(cc); + AuditList_free(&altmp); + cc->auditList = al; +} + +/* + * Function name: ConnectClient_set_header + * Description: Sets header buffer for incomplete headers. + * Arguments: cc - pointer to ConnectClient structure + * hb - header buffer for incomplete headers + */ + +void +ConnectClient_set_header(ConnectClient* cc, HeaderBuffer* hb) +{ + HeaderBuffer* hbtmp; + assert(cc != NULL); + if (cc == NULL) { + return; + } + hbtmp = ConnectClient_get_header(cc); + HeaderBuffer_free(&hbtmp); + cc->header = hb; +} + +/* + * Function name: ConnectClient_set_task + * Description: Sets the client task. + * Arguments: cc - pointer to ConnectClient structure + * task - the task to set + */ + +void +ConnectClient_set_task(ConnectClient* cc, Task* task) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + if (cc->task) { + Task_free(&(cc->task)); + } + cc->task = task; +} + +/* + * Function name: ConnectClient_get_state + * Description: Gets state of the connected client. + * Arguments: cc - pointer to ConnectClient structure + * Returns: State of the connected client. + */ + +char +ConnectClient_get_state(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return CONNECTCLIENT_STATE_UNKNOWN; + } + return cc->state; +} + +/* + * Function name: ConnectClient_get_sslFd + * Description: Gets SslFd structure. + * Arguments: cc - pointer to ConnectClient structure + * Returns: SslFd structure. + */ + +SslFd* +ConnectClient_get_sslFd(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->sslFd; +} + +/* + * Function name: ConnectClient_get_timer + * Description: Gets timer of the client used for internal time counting. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Timer of the client used for internal time counting. + */ + +struct timeval +ConnectClient_get_timer(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return timeval_create(0, 0); + } + return cc->timer; +} + +/* + * Function name: ConnectClient_get_users + * Description: Gets users descriptor table. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Users descriptor table. + */ + +int* +ConnectClient_get_users(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->users; +} + +/* + * Function name: ConnectClient_get_connected + * Description: Gets number of connected users. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Number of connected users. + */ + +int +ConnectClient_get_connected(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->connected; +} + +/* + * Function name: ConnectClient_get_limit + * Description: Gets limit of connected users. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Limit of connected users. + */ + +int +ConnectClient_get_limit(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->limit; +} + +/* + * Function name: ConnectClient_get_listenFd + * Description: Gets listen socket descriptor. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Listen socket descriptor. + */ + +int +ConnectClient_get_listenFd(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->listenFd; +} + +/* + * Function name: ConnectClient_get_usrCliPair + * Description: Gets user-client pair number. + * Arguments: cc - pointer to ConnectClient structure + * Returns: User-client pair number. + */ + +int +ConnectClient_get_usrCliPair(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->usrCliPair; +} + +/* + * Function name: ConnectClient_get_clientId + * Description: Gets client identification number. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Client identification number. + */ + +int +ConnectClient_get_clientId(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return -1; + } + return cc->clientId; +} + +/* + * Function name: ConnectClient_get_connectTime + * Description: Gets start time of the connection. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Start time of the connection. + */ + +time_t +ConnectClient_get_connectTime(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return 0; + } + return cc->connectTime; +} + +/* + * Function name: ConnectClient_get_lastActivity + * Description: Gets time of the last client activity (when last packet from afclient has arrived) + * Arguments: cc - pointer to ConnectClient structure + * Returns: Time of the last client activity. + */ + +time_t +ConnectClient_get_lastActivity(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return 0; + } + return cc->lastActivity; +} + +/* + * Function name: ConnectClient_get_sClientId + * Description: Gets client identification string. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Client identification string. + */ + +char* +ConnectClient_get_sClientId(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->sClientId; +} + +/* + * Function name: ConnectClient_get_nameBuf + * Description: Gets name of the client. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Name of the client. + */ + +char* +ConnectClient_get_nameBuf(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->nameBuf; +} + +/* + * Function name: ConnectClient_get_portBuf + * Description: Gets port from which client is connected. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Port from which client is connected. + */ + +char* +ConnectClient_get_portBuf(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->portBuf; +} + +/* + * Function name: ConnectClient_get_tunnelType + * Description: Gets tupe of the client tunnel. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Tupe of the client tunnel. + */ + +char +ConnectClient_get_tunnelType(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return CONNECTCLIENT_TUNNELTYPE_UNKNOWN; + } + return cc->tunnelType; +} + +/* + * Function name: ConnectClient_get_multi + * Description: Gets the status of the multi option. + * Arguments: cc - pointer to ConnectClient structure + * Returns: CONNECTCLIENT_MULTI_ENABLED - the option is enabled, + * CONNECTCLIENT_MULTI_DISABLED - the option is disabled. + */ + +char +ConnectClient_get_multi(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return CONNECTCLIENT_MULTI_DISABLED; + } + return cc->multi; +} + +/* + * Function name: ConnectClient_get_auditList + * Description: Gets audit list for the audit feature. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Audit list for the audit feature. + */ + +AuditList* +ConnectClient_get_auditList(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->auditList; +} + +/* + * Function name: ConnectClient_get_header + * Description: Gets header buffer for incomplete headers. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Header buffer for incomplete headers. + */ + +HeaderBuffer* +ConnectClient_get_header(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->header; +} + +/* + * Function name: ConnectClient_get_task + * Description: Gets the client task. + * Arguments: cc - pointer to ConnectClient structure + * Returns: The client task. + */ + +Task* +ConnectClient_get_task(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return cc->task; +} + +/* + * Function name: ConnectClient_create_users + * Description: Creates user descriptor table. Memory for the table is allocated according + * to the previously set 'limit' value. All the descriptors are set to -1. + * Arguments: cc - pointer to ConnectClient structure + * Returns: >0 - there were some problems with memory allocation + * 0 - everything was ok + */ + +int +ConnectClient_create_users(ConnectClient* cc) +{ + int i, limit; + assert(cc != NULL); + if (cc == NULL) { + return 1; + } + limit = ConnectClient_get_limit(cc); + assert(limit != -1); + if (limit == -1) { + return 2; + } + cc->users = malloc(limit * sizeof(int)); + assert(cc->users != NULL); + if (cc->users == NULL) { + return 3; + } + for (i = 0; i < limit; ++i) { + cc->users[i] = -1; + } + return 0; +} + +/* + * Function name: ConnectClient_get_timerp + * Description: Gets pointer to timer of the client used for internal time counting. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Pointer to timer of the client used for internal time counting. + */ + +struct timeval* +ConnectClient_get_timerp(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return (&(cc->timer)); +} + +/* + * Function name: ConnectClient_increase_connected + * Description: Increases number of connected users. + * Arguments: cc - pointer to ConnectClient structure + */ + +void +ConnectClient_increase_connected(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + ConnectClient_set_connected(cc, ConnectClient_get_connected(cc) + 1); +} + +/* + * Function name: ConnectClient_decrease_connected + * Description: Decreases number of connected users. + * Arguments: cc - pointer to ConnectClient structure + */ + +void +ConnectClient_decrease_connected(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return; + } + ConnectClient_set_connected(cc, ConnectClient_get_connected(cc) - 1); +} + +/* + * Function name: ConnectClient_get_listenFdp + * Description: Gets pointer to listen socket descriptor. + * Arguments: cc - pointer to ConnectClient structure + * Returns: Pointer to listen socket descriptor. + */ + +int* +ConnectClient_get_listenFdp(ConnectClient* cc) +{ + assert(cc != NULL); + if (cc == NULL) { + return NULL; + } + return (&(cc->listenFd)); +} diff --git a/src/connect_client_struct.h b/src/connect_client_struct.h new file mode 100644 index 0000000..9cf2e6d --- /dev/null +++ b/src/connect_client_struct.h @@ -0,0 +1,119 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_CONNECT_CLIENT_STRUCT_H +#define _JS_CONNECT_CLIENT_STRUCT_H + +#include <time.h> + +#include "ssl_fd_struct.h" +#include "audit_list_struct.h" +#include "header_buffer_struct.h" +#include "task_struct.h" + +#define CONNECTCLIENT_STATE_UNKNOWN -1 +#define CONNECTCLIENT_STATE_FREE 0 +#define CONNECTCLIENT_STATE_CONNECTING 1 +#define CONNECTCLIENT_STATE_AUTHORIZING 2 +#define CONNECTCLIENT_STATE_ACCEPTED 3 + +#define CONNECTCLIENT_TUNNELTYPE_UNKNOWN -1 +#define CONNECTCLIENT_TUNNELTYPE_DIRECT 0 +#define CONNECTCLIENT_TUNNELTYPE_HTTPPROXY 1 +#define CONNECTCLIENT_TUNNELTYPE_HTTPSPROXY 2 + +#define CONNECTCLIENT_MULTI_ENABLED 1 +#define CONNECTCLIENT_MULTI_DISABLED 0 + +typedef struct { + char state; + SslFd* sslFd; + struct timeval timer; + int* users; + int connected; + int limit; + int listenFd; + int usrCliPair; + int clientId; + time_t connectTime; + time_t lastActivity; + char* sClientId; + char nameBuf[128]; + char portBuf[7]; + char tunnelType; + char multi; + AuditList* auditList; + HeaderBuffer* header; + Task* task; +} ConnectClient; + +/* 'constructor' */ +ConnectClient* ConnectClient_new(); +/* 'destructor' */ +void ConnectClient_free(ConnectClient** cc); +/* setters */ +void ConnectClient_set_state(ConnectClient* cc, char state); +void ConnectClient_set_sslFd(ConnectClient* cc, SslFd* sf); +void ConnectClient_set_timer(ConnectClient* cc, struct timeval timer); +void ConnectClient_set_users(ConnectClient* cc, int* users); +void ConnectClient_set_connected(ConnectClient* cc, int connected); +void ConnectClient_set_limit(ConnectClient* cc, int limit); +void ConnectClient_set_listenFd(ConnectClient* cc, int listenFd); +void ConnectClient_set_usrCliPair(ConnectClient* cc, int usrCliPair); +void ConnectClient_set_clientId(ConnectClient* cc, int clientId); +void ConnectClient_set_connectTime(ConnectClient* cc, time_t connectTime); +void ConnectClient_set_lastActivity(ConnectClient* cc, time_t lastActivity); +void ConnectClient_set_sClientId(ConnectClient* cc, char* sClientId); +void ConnectClient_set_nameBuf(ConnectClient* cc, char* nameBuf); +void ConnectClient_set_portBuf(ConnectClient* cc, char* portBuf); +void ConnectClient_set_tunnelType(ConnectClient* cc, char tunnelType); +void ConnectClient_set_multi(ConnectClient* cc, char multi); +void ConnectClient_set_auditList(ConnectClient* cc, AuditList* al); +void ConnectClient_set_header(ConnectClient* cc, HeaderBuffer* hb); +void ConnectClient_set_task(ConnectClient* cc, Task* task); +/* getters */ +char ConnectClient_get_state(ConnectClient* cc); +SslFd* ConnectClient_get_sslFd(ConnectClient* cc); +struct timeval ConnectClient_get_timer(ConnectClient* cc); +int* ConnectClient_get_users(ConnectClient* cc); +int ConnectClient_get_connected(ConnectClient* cc); +int ConnectClient_get_limit(ConnectClient* cc); +int ConnectClient_get_listenFd(ConnectClient* cc); +int ConnectClient_get_usrCliPair(ConnectClient* cc); +int ConnectClient_get_clientId(ConnectClient* cc); +time_t ConnectClient_get_connectTime(ConnectClient* cc); +time_t ConnectClient_get_lastActivity(ConnectClient* cc); +char* ConnectClient_get_sClientId(ConnectClient* cc); +char* ConnectClient_get_nameBuf(ConnectClient* cc); +char* ConnectClient_get_portBuf(ConnectClient* cc); +char ConnectClient_get_tunnelType(ConnectClient* cc); +char ConnectClient_get_multi(ConnectClient* cc); +AuditList* ConnectClient_get_auditList(ConnectClient* cc); +HeaderBuffer* ConnectClient_get_header(ConnectClient* cc); +Task* ConnectClient_get_task(ConnectClient* cc); +/* other */ +int ConnectClient_create_users(ConnectClient* cc); +struct timeval* ConnectClient_get_timerp(ConnectClient* cc); +void ConnectClient_increase_connected(ConnectClient* cc); +void ConnectClient_decrease_connected(ConnectClient* cc); +int* ConnectClient_get_listenFdp(ConnectClient* cc); + +#endif diff --git a/src/connect_user_struct.c b/src/connect_user_struct.c new file mode 100644 index 0000000..ac6fe3c --- /dev/null +++ b/src/connect_user_struct.c @@ -0,0 +1,398 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "activefor.h" +#include "connect_user_struct.h" + +/* + * Function name: ConnectUser_new + * Description: Create and initialize new ConnectUser structure. + * Returns: Newly created ConnectUser structure. + */ + +ConnectUser* +ConnectUser_new() +{ + ConnectUser* tmp = calloc(1, sizeof(ConnectUser)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->bufList = BufList_new(); + assert(tmp->bufList != NULL); + if (tmp->bufList == NULL) { + ConnectUser_free(&tmp); + return NULL; + } + tmp->stats = UserStats_new(); + assert(tmp->stats != NULL); + if (tmp->stats == NULL) { + ConnectUser_free(&tmp); + return NULL; + } + return tmp; +} + +/* + * Function name: ConnectUser_free + * Description: Free the memory allocated for ConnectUser structure. + * Arguments: cu - pointer to pointer to ConnectUser structure + */ + +void +ConnectUser_free(ConnectUser** cu) +{ + BufList* bftmp; + UserStats* ustmp; + assert(cu != NULL); + if (cu == NULL) { + return; + } + assert((*cu) != NULL); + if ((*cu) == NULL) { + return; + } + bftmp = ConnectUser_get_bufList((*cu)); + ustmp = ConnectUser_get_stats((*cu)); + BufList_free(&bftmp); + UserStats_free(&ustmp); + free((*cu)); + (*cu) = NULL; +} + +/* + * Function name: ConnectUser_set_state + * Description: Set state of the connected user. + * Arguments: cu - pointer to ConnectUser structure + * state - state of the connected User + */ + +void +ConnectUser_set_state(ConnectUser* cu, char state) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + cu->state = state; +} + +/* + * Function name: ConnectUser_set_connFd + * Description: Set connection's file descriptor. + * Arguments: cu - pointer to ConnectUser structure + * connFd - connection's file descriptor + */ + +void +ConnectUser_set_connFd(ConnectUser* cu, int connFd) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + cu->connFd = connFd; +} + +/* + * Function name: ConnectUser_set_whatClient + * Description: Set client number, to which this user is connected to. + * Arguments: cu - pointer to ConnectUser structure + * whatClient - client number, to which this user is connected to + */ + +void +ConnectUser_set_whatClient(ConnectUser* cu, int whatClient) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + cu->whatClient = whatClient; +} + +/* + * Function name: ConnectUser_set_userId + * Description: Set user identification number. + * Arguments: cu - pointer to ConnectUser structure + * userId - user identification number + */ + +void +ConnectUser_set_userId(ConnectUser* cu, int userId) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + cu->userId = userId; +} + +/* + * Function name: ConnectUser_set_connectTime + * Description: Set connect time of the user. + * Arguments: cu - pointer to ConnectUser structure + * connectTime - connect time of the user + */ + +void +ConnectUser_set_connectTime(ConnectUser* cu, time_t connectTime) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + cu->connectTime = connectTime; +} + +/* + * Function name: ConnectUser_set_nameBuf + * Description: Set name of the user. + * Arguments: cu - pointer to ConnectUser structure + * nameBuf - name of the user + */ + +void +ConnectUser_set_nameBuf(ConnectUser* cu, char* nameBuf) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + memset(cu->nameBuf, 0, 128); + strncpy(cu->nameBuf, nameBuf, 127); +} + +/* + * Function name: ConnectUser_set_portBuf + * Description: Set port from which user is connected. + * Arguments: cu - pointer to ConnectUser structure + * portBuf - port from which user is connected + */ + +void +ConnectUser_set_portBuf(ConnectUser* cu, char* portBuf) +{ + assert(cu != NULL); + if (cu == NULL) { + return; + } + memset(cu->portBuf, 0, 7); + strncpy(cu->portBuf, portBuf, 6); +} + +/* + * Function name: ConnectUser_set_bufList + * Description: Set buffer list for incoming packets. + * Arguments: cu - pointer to ConnectUser structure + * bufList - buffer list for incoming packets + */ + +void +ConnectUser_set_bufList(ConnectUser* cu, BufList* bufList) +{ + BufList* bftmp; + assert(cu != NULL); + if (cu == NULL) { + return; + } + bftmp = ConnectUser_get_bufList(cu); + BufList_free(&bftmp); + cu->bufList = bufList; +} + +/* + * Function name: ConnectUser_set_stats + * Description: Set stats object for this user. + * Arguments: cu - pointer to ConnectUser structure + * stats - stats object for this user + */ + +void +ConnectUser_set_stats(ConnectUser* cu, UserStats* stats) +{ + UserStats* ustmp; + assert(cu != NULL); + if (cu == NULL) { + return; + } + ustmp = ConnectUser_get_stats(cu); + UserStats_free(&ustmp); + cu->stats = stats; +} + +/* + * Function name: ConnectUser_get_state + * Description: Get state of the connected user. + * Arguments: cu - pointer to ConnectUser structure + * Returns: State of the connected user. + */ + +char +ConnectUser_get_state(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return S_STATE_CLEAR; + } + return cu->state; +} + +/* + * Function name: ConnectUser_get_connFd + * Description: Get connection's file descriptor. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Connection's file descriptor. + */ + +int +ConnectUser_get_connFd(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return -1; + } + return cu->connFd; +} + +/* + * Function name: ConnectUser_get_whatClient + * Description: Get client number, to which this user is connected to. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Client number, to which this user is connected to. + */ + +int +ConnectUser_get_whatClient(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return -1; + } + return cu->whatClient; +} + +/* + * Function name: ConnectUser_get_userId + * Description: Get user identification number. + * Arguments: cu - pointer to ConnectUser structure + * Returns: User identification number. + */ + +int +ConnectUser_get_userId(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return -1; + } + return cu->userId; +} + +/* + * Function name: ConnectUser_get_connectTime + * Description: Get connect time of the user. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Connect time of the user. + */ + +time_t +ConnectUser_get_connectTime(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return 0; + } + return cu->connectTime; +} + +/* + * Function name: ConnectUser_get_nameBuf + * Description: Get name of the user. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Name of the user. + */ + +char* +ConnectUser_get_nameBuf(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return NULL; + } + return cu->nameBuf; +} + +/* + * Function name: ConnectUser_get_portBuf + * Description: Get port from which user is connected. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Port from which user is connected. + */ + +char* +ConnectUser_get_portBuf(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return NULL; + } + return cu->portBuf; +} + +/* + * Function name: ConnectUser_get_bufList + * Description: Get buffer list for incoming packets. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Buffer list for incoming packets. + */ + +BufList* +ConnectUser_get_bufList(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return NULL; + } + return cu->bufList; +} + +/* + * Function name: ConnectUser_get_stats + * Description: Get stats object for this user. + * Arguments: cu - pointer to ConnectUser structure + * Returns: Stats object for this user. + */ + +UserStats* +ConnectUser_get_stats(ConnectUser* cu) +{ + assert(cu != NULL); + if (cu == NULL) { + return NULL; + } + return cu->stats; +} diff --git a/src/connect_user_struct.h b/src/connect_user_struct.h new file mode 100644 index 0000000..8e424d2 --- /dev/null +++ b/src/connect_user_struct.h @@ -0,0 +1,67 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_CONNECT_USER_STRUCT_H +#define _JS_CONNECT_USER_STRUCT_H + +#include <sys/types.h> + +#include "buf_list_struct.h" +#include "user_stats_struct.h" + +typedef struct { + char state; + int connFd; + int whatClient; + int userId; + time_t connectTime; + char nameBuf[128]; + char portBuf[7]; + BufList* bufList; + UserStats* stats; +} ConnectUser; + +/* 'constructor' */ +ConnectUser* ConnectUser_new(); +/* 'destructor' */ +void ConnectUser_free(ConnectUser** cu); +/* setters */ +void ConnectUser_set_state(ConnectUser* cu, char state); +void ConnectUser_set_connFd(ConnectUser* cu, int connFd); +void ConnectUser_set_whatClient(ConnectUser* cu, int whatClient); +void ConnectUser_set_userId(ConnectUser* cu, int userId); +void ConnectUser_set_connectTime(ConnectUser* cu, time_t connectTime); +void ConnectUser_set_nameBuf(ConnectUser* cu, char* nameBuf); +void ConnectUser_set_portBuf(ConnectUser* cu, char* portBuf); +void ConnectUser_set_bufList(ConnectUser* cu, BufList* bufList); +void ConnectUser_set_stats(ConnectUser* cu, UserStats* stats); +/* getters */ +char ConnectUser_get_state(ConnectUser* cu); +int ConnectUser_get_connFd(ConnectUser* cu); +int ConnectUser_get_whatClient(ConnectUser* cu); +int ConnectUser_get_userId(ConnectUser* cu); +time_t ConnectUser_get_connectTime(ConnectUser* cu); +char* ConnectUser_get_nameBuf(ConnectUser* cu); +char* ConnectUser_get_portBuf(ConnectUser* cu); +BufList* ConnectUser_get_bufList(ConnectUser* cu); +UserStats* ConnectUser_get_stats(ConnectUser* cu); + +#endif diff --git a/src/daemon.c b/src/daemon.c new file mode 100644 index 0000000..db2195d --- /dev/null +++ b/src/daemon.c @@ -0,0 +1,73 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "daemon.h" + +#ifndef HAVE_DAEMON + +#ifndef HAVE_THIS_DAEMON +#define HAVE_THIS_DAEMON + +/* + * Function name: daemon + * Description: Enters into daemon mode. It's the emulation of the daemon + * function from the system. + * Arguments: nochdir - when 0, the directory will be changed to /, otherwise + * the directory will be unchanged + * noclose - when 0, the standard streams will be closed, otherwise + * the streams will be unchanged + * Returns: 0 - success, + * -1 - failure. + */ + +int +daemon(int nochdir, int noclose) +{ + int retval; + if ((retval = fork()) == 0) { + /* child process */ + setsid(); + if (nochdir == 0) { + chdir("/"); + } + if (noclose == 0) { + retval = open("/dev/null", O_RDWR); + if (retval == -1) { + return retval; + } + dup2(retval, STDIN_FILENO); + dup2(retval, STDOUT_FILENO); + dup2(retval, STDERR_FILENO); + close(retval); + } + } + else { + /* parent process */ + if (retval == -1) { + return retval; + } + _exit(0); + } + return 0; +} + +#endif + +#endif diff --git a/src/daemon.h b/src/daemon.h new file mode 100644 index 0000000..e2de517 --- /dev/null +++ b/src/daemon.h @@ -0,0 +1,39 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#ifndef HAVE_DAEMON + +#include <sys/types.h> +#include <unistd.h> +#include <sys/stat.h> +#include <fcntl.h> + +# ifndef _JS_DAEMON_H +# define _JS_DAEMON_H + +int daemon(int nochdir, int noclose); + +# endif + +#endif diff --git a/src/file.c b/src/file.c new file mode 100644 index 0000000..70080c8 --- /dev/null +++ b/src/file.c @@ -0,0 +1,117 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "file.h" +#include "activefor.h" +#include "logging.h" +#include "network.h" +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <limits.h> +#include <ctype.h> + +/* + * Function name: parse_line + * Description: Splits the buffer into two parts: option and value. + * Arguments: buff - the buffer to split + * tab1 - the place where option part will be stored + * tab2 - the place where value part will be stored + * Returns: 0 - the buffer was empty, + * 1 - the buffer contains only option name, + * 2 - the buffer contains only value of the option. + */ + +int +parse_line(char* buff, char* tab1, char* tab2) +{ + int state, i, j, lastDot; + state = i = j = 0; + lastDot = -1; + while (buff[i] != 0) { + if (buff[i] == '#') { + if ((i > 0) && (buff[i-1] == '\\')) { + --j; + } + else { + break; + } + } + switch (state) { + case 0: { /* before option name */ + if (!isspace(buff[i])) { + tab1[j] = buff[i]; + j = 1; + state = 1; + } + break; + } + case 1: { /* option */ + if (isspace(buff[i])) { + tab1[j] = 0; + state = 2; + j = 0; + } + else { + tab1[j] = buff[i]; + ++j; + } + break; + } + case 2: { /* before option value */ + if (!isspace(buff[i])) { + if (buff[i] != '.') { + tab2[j] = buff[i]; + j = 1; + } + state = 3; + } + break; + } + case 3: { /* option value */ + if (buff[i] == '.') { + lastDot = j; + } + else if (!isspace(buff[i])) { + lastDot = -1; + } + else if (lastDot == -1) { + lastDot = j; + } + tab2[j] = buff[i]; + ++j; + break; + } + } + ++i; + } + if (lastDot != -1) { + tab2[lastDot] = 0; + } + if (state == 3) { + return 2; + } + if (state == 0) { + return 0; + } + return 1; +} diff --git a/src/file.h b/src/file.h new file mode 100644 index 0000000..8aada50 --- /dev/null +++ b/src/file.h @@ -0,0 +1,41 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "network.h" +#include "server_configuration_struct.h" +#include "client_configuration_struct.h" +#include <openssl/ssl.h> + +#ifndef _JS_FILE_H +#define _JS_FILE_H + +#define F_UNKNOWN 1 +#define F_IGNORE 2 +#define F_ROPTION 3 +#define F_RVALUE 4 +#define F_MIDDLE 5 + +int parse_line(char* buff, char* tab1, char* tab2); /* parse one line of the file */ +ServerConfiguration* parsefile(char*, int*); /* parse the cfg file */ +ClientConfiguration* cparsefile(char*, int*); /* parse the client's cfg file */ + +#endif + diff --git a/src/file_client.c b/src/file_client.c new file mode 100644 index 0000000..672eeaf --- /dev/null +++ b/src/file_client.c @@ -0,0 +1,281 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <limits.h> +#include <ctype.h> +#include <assert.h> + +#include "file.h" +#include "activefor.h" +#include "logging.h" +#include "network.h" + +/* + * Function name: cparsefile + * Description: Parses the client config file. + * Arguments: name - the name of the file with client's config + * status - the status returned from this function: + * 0 - file was parsed successfully + * n>0 - there was an error in the n-th line + * Returns: Pointer to ClientConfiguration structure. + */ + +ClientConfiguration* +cparsefile(char* name, int* status) +{ + ClientConfiguration* cfg; + FILE* file = NULL; + int state, i, n; +#ifdef AF_INET6 + int temp; +#endif + char buff[256]; + char helpbuf1[256]; + char helpbuf2[256]; + char* tmpbuf; + unsigned char pass[4] = {1, 2, 3, 4}; + + assert(name != NULL); + assert(status != NULL); + + *status = 1; + + memset(buff, 0, 256); + + cfg = ClientConfiguration_new(); + + if (cfg == NULL) { + printf("Can't allocate memory for client configuration... exiting\n"); + exit(1); + } + + state = F_UNKNOWN; + + file = fopen(name, "r"); + if (file == NULL) { + return cfg; + } + + ClientConfiguration_set_realmsNumber(cfg, 1); + + ClientConfiguration_set_realmsTable(cfg, + calloc(ClientConfiguration_get_realmsNumber(cfg), sizeof(ClientRealm*))); + if (ClientConfiguration_get_realmsTable(cfg) == NULL) { + printf("Can't allocate memory for ClientRealm* table... exiting\n"); + exit(1); + } + for (i = 0; i < ClientConfiguration_get_realmsNumber(cfg); ++i) { + ClientConfiguration_get_realmsTable(cfg)[i] = ClientRealm_new(); + if (ClientConfiguration_get_realmsTable(cfg)[i] == NULL) { + printf("Problem with allocating memory for ClientRealm structure... exiting"); + exit(1); + } + ClientRealm_set_password(ClientConfiguration_get_realmsTable(cfg)[i], pass); + ClientRealm_set_destinationPorts(ClientConfiguration_get_realmsTable(cfg)[i], PortList_new()); + } + *status = 0; + + while (fgets(buff, 256, file) != NULL) { /* loop - parsing file */ + (*status)++; + state = parse_line(buff, helpbuf1, helpbuf2); + if (helpbuf1[0] == '#') { + memset(buff, 0, 256); + continue; + } + if (state == 1) { + if (strcmp(helpbuf1, "ignorepkeys") == 0) { + ClientConfiguration_set_ignorePublicKeys(cfg, 1); + } + else if (strcmp(helpbuf1, "ar-start") == 0) { + ArOptions_set_arStart(ClientRealm_get_arOptions(ClientConfiguration_get_realmsTable(cfg)[0]), + AR_OPTION_ENABLED); + } + else if (strcmp(helpbuf1, "ar-quit") == 0) { + ArOptions_set_arQuit(ClientRealm_get_arOptions(ClientConfiguration_get_realmsTable(cfg)[0]), + AR_OPTION_ENABLED); + } + else if (strcmp(helpbuf1, "noar") == 0) { + ArOptions_set_arPremature(ClientRealm_get_arOptions(ClientConfiguration_get_realmsTable(cfg)[0]), + AR_OPTION_DISABLED); + } + else if ((strcmp(helpbuf1, "u") == 0) || (strcmp(helpbuf1, "udpmode") == 0)) { + if (ClientRealm_get_clientMode(ClientConfiguration_get_realmsTable(cfg)[0]) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_UDP); + } + else { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_UNKNOWN); + } + } + else if ((strcmp(helpbuf1, "U") == 0) || (strcmp(helpbuf1, "reverseudp") == 0)) { + if (ClientRealm_get_clientMode(ClientConfiguration_get_realmsTable(cfg)[0]) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_REVERSE); + } + else { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_UNKNOWN); + } + } + else if ((strcmp(helpbuf1, "r") == 0) || (strcmp(helpbuf1, "remoteadmin") == 0)) { + if (ClientRealm_get_clientMode(ClientConfiguration_get_realmsTable(cfg)[0]) == CLIENTREALM_MODE_TCP) { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_REMOTE); + } + else { + ClientRealm_set_clientMode(ClientConfiguration_get_realmsTable(cfg)[0], CLIENTREALM_MODE_UNKNOWN); + } + } + else if ((strcmp(helpbuf1, "S") == 0) || (strcmp(helpbuf1, "use-https") == 0)) { + HttpProxyOptions_use_https(ClientRealm_get_httpProxyOptions( + ClientConfiguration_get_realmsTable(cfg)[0])); + } + else if ((strcmp(helpbuf1, "B") == 0) || (strcmp(helpbuf1, "pa-t-basic") == 0)) { + HttpProxyOptions_set_proxyauth_type(ClientRealm_get_httpProxyOptions( + ClientConfiguration_get_realmsTable(cfg)[0]), PROXYAUTH_TYPE_BASIC); + } +#ifdef HAVE_LIBPTHREAD + else if (strcmp(helpbuf1, "enableproxy")==0) { + if (ClientRealm_get_tunnelType( + ClientConfiguration_get_realmsTable(cfg)[0]) == 0) { + ClientRealm_set_tunnelType( + ClientConfiguration_get_realmsTable(cfg)[0], + 1); + } + else { + return cfg; + } + } +#endif +#ifdef AF_INET6 + else if (strcmp(helpbuf1, "ipv4")==0) { + if (TYPE_IS_UNSPEC(ClientRealm_get_realmType( + ClientConfiguration_get_realmsTable(cfg)[0]))) { + temp = ClientRealm_get_realmType(ClientConfiguration_get_realmsTable(cfg)[0]); + TYPE_SET_IPV4(temp); + ClientRealm_set_realmType(ClientConfiguration_get_realmsTable(cfg)[0], temp); + } + else { + return cfg; + } + } + else if (strcmp(helpbuf1, "ipv6")==0) { + if (TYPE_IS_UNSPEC(ClientRealm_get_realmType( + ClientConfiguration_get_realmsTable(cfg)[0]))) { + temp = ClientRealm_get_realmType(ClientConfiguration_get_realmsTable(cfg)[0]); + TYPE_SET_IPV6(temp); + ClientRealm_set_realmType(ClientConfiguration_get_realmsTable(cfg)[0], temp); + } + else { + return cfg; + } + } +#endif + else { + return cfg; + } + } + else if (state == 2) { + if ((strcmp(helpbuf1, "k") == 0) || (strcmp(helpbuf1, "keyfile") == 0)) { + ClientConfiguration_set_keysFile(cfg, helpbuf2); + } + else if ((strcmp(helpbuf1, "c") == 0) || (strcmp(helpbuf1, "certificate") == 0) || (strcmp(helpbuf1, "cerfile") == 0)) { + ClientConfiguration_set_certificateFile(cfg, helpbuf2); + } + else if ((strcmp(helpbuf1, "s") == 0) || (strcmp(helpbuf1, "storefile") == 0)) { + ClientConfiguration_set_storeFile(cfg, helpbuf2); + } + else if ((strcmp(helpbuf1, "o") == 0) || (strcmp(helpbuf1, "log") == 0)) { + tmpbuf = calloc(strlen(helpbuf2)+1, sizeof(char)); + strcpy(tmpbuf, helpbuf2); + addlogtarget(tmpbuf); + } + else if ((strcmp(helpbuf1, "D") == 0) || (strcmp(helpbuf1, "dateformat") == 0)) { + ClientConfiguration_set_dateFormat(cfg, helpbuf2); + } + else if ((strcmp(helpbuf1, "n") == 0) || (strcmp(helpbuf1, "servername") == 0)) { + ClientRealm_set_serverName(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if ((strcmp(helpbuf1, "m") == 0) || (strcmp(helpbuf1, "manageport") == 0)) { + ClientRealm_set_managePort(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if ((strcmp(helpbuf1, "d") == 0) || (strcmp(helpbuf1, "hostname") == 0)) { + ClientRealm_set_hostName(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if ((strcmp(helpbuf1, "p") == 0) || (strcmp(helpbuf1, "portnum") == 0)) { + PortList_insert_back(ClientRealm_get_destinationPorts(ClientConfiguration_get_realmsTable(cfg)[0]), + PortListNode_new(helpbuf2)); + } + else if (strcmp(helpbuf1, "localname") == 0) { + ClientRealm_set_localName(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if (strcmp(helpbuf1, "localport") == 0) { + ClientRealm_set_localPort(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if (strcmp(helpbuf1, "localdesname") == 0) { + ClientRealm_set_localDestinationName(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if ((strcmp(helpbuf1, "i") == 0) || (strcmp(helpbuf1, "id") == 0)) { + ClientRealm_set_realmId(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if (strcmp(helpbuf1, "pass") == 0) { + n = strlen(helpbuf2); + memset(pass, 0, 4); + for (i = 0; i < n; ++i) { + pass[i%4] += helpbuf2[i]; + } + ClientRealm_set_password(ClientConfiguration_get_realmsTable(cfg)[0], pass); + } + else if ((strcmp(helpbuf1, "K") == 0) || (strcmp(helpbuf1, "keep-alive") == 0)) { + ClientRealm_set_sKeepAliveTimeout(ClientConfiguration_get_realmsTable(cfg)[0], helpbuf2); + } + else if ((strcmp(helpbuf1, "A") == 0) || (strcmp(helpbuf1, "ar-tries") == 0)) { + ArOptions_set_s_arTries(ClientRealm_get_arOptions(ClientConfiguration_get_realmsTable(cfg)[0]), + helpbuf2); + } + else if ((strcmp(helpbuf1, "T") == 0) || (strcmp(helpbuf1, "ar-delay") == 0)) { + ArOptions_set_s_arDelay(ClientRealm_get_arOptions(ClientConfiguration_get_realmsTable(cfg)[0]), + helpbuf2); + } + else if ((strcmp(helpbuf1, "P") == 0) || (strcmp(helpbuf1, "proxyname") == 0)) { + HttpProxyOptions_set_proxyname(ClientRealm_get_httpProxyOptions( + ClientConfiguration_get_realmsTable(cfg)[0]), helpbuf2); + } + else if ((strcmp(helpbuf1, "X") == 0) || (strcmp(helpbuf1, "proxyport") == 0)) { + HttpProxyOptions_set_proxyport(ClientRealm_get_httpProxyOptions( + ClientConfiguration_get_realmsTable(cfg)[0]), helpbuf2); + } + else if ((strcmp(helpbuf1, "C") == 0) || (strcmp(helpbuf1, "pa-cred") == 0)) { + HttpProxyOptions_set_proxyauth_cred(ClientRealm_get_httpProxyOptions( + ClientConfiguration_get_realmsTable(cfg)[0]), helpbuf2); + } + else { + return cfg; + } + } + memset(buff, 0, 256); + } + + fclose(file); + + *status = 0; + return cfg; +} diff --git a/src/file_server.c b/src/file_server.c new file mode 100644 index 0000000..3abfc57 --- /dev/null +++ b/src/file_server.c @@ -0,0 +1,390 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "file.h" +#include "activefor.h" +#include "logging.h" +#include "network.h" +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <limits.h> +#include <ctype.h> + +/* + * Function name: parsefile + * Description: Parses the server config file. + * Arguments: name - the name of the file with client's config + * status - the status returned from this function: + * 0 - file was parsed successfully + * n>0 - there was an error in the n-th line + * Returns: Pointer to ServerConfiguration structure. + */ + +ServerConfiguration* +parsefile(char* name, int* status) +{ + ServerConfiguration* cfg; + FILE* file = NULL; + int state, i, j, n, listencount, managecount, temp; + char buff[256]; + char helpbuf1[256]; + char helpbuf2[256]; + char* tmpbuf; + unsigned char pass[4] = {1, 2, 3, 4}; + + *status = 1; + + memset(buff, 0, 256); + + cfg = ServerConfiguration_new(); + + if (cfg == NULL) { + printf("Can't allocate memory for server configuration... exiting\n"); + exit(1); + } + + state = F_UNKNOWN; + + file = fopen(name, "r"); + if (file == NULL) { + return cfg; + } + + while (fgets(buff, 256, file) != NULL) { /* first loop - counting realm */ + helpbuf1[0] = 0; + parse_line(buff, helpbuf1, helpbuf2); + if (strcmp(helpbuf1, "realm")==0) { + ServerConfiguration_set_realmsNumber(cfg, ServerConfiguration_get_realmsNumber(cfg) + 1); + } + } + rewind(file); + + ServerConfiguration_set_realmsTable(cfg, + calloc(ServerConfiguration_get_realmsNumber(cfg), sizeof(ServerRealm*))); + if (ServerConfiguration_get_realmsTable(cfg) == NULL) { + printf("Can't allocate memory for ServerRealm* table... exiting\n"); + exit(1); + } + for (i = 0; i < ServerConfiguration_get_realmsNumber(cfg); ++i) { + ServerConfiguration_get_realmsTable(cfg)[i] = ServerRealm_new(); + if (ServerConfiguration_get_realmsTable(cfg)[i] == NULL) { + printf("Problem with allocating memory for ServerRealm structure... exiting"); + exit(1); + } + ServerRealm_set_password(ServerConfiguration_get_realmsTable(cfg)[i], pass); + } + ServerConfiguration_set_realmsNumber(cfg, 0); + *status = 0; + + listencount = managecount = 0; + + + while (fgets(buff, 256, file) != NULL) { /* second loop - counting listen */ + (*status)++; + state = parse_line(buff, helpbuf1, helpbuf2); + if (state) { + if (strcmp(helpbuf1, "realm") == 0) { + ServerConfiguration_set_realmsNumber(cfg, ServerConfiguration_get_realmsNumber(cfg) + 1); + if (listencount != managecount) { + return cfg; + } + listencount = managecount = 0; + } + else if ((strcmp(helpbuf1, "listen") == 0) || (strcmp(helpbuf1, "listenport") == 0)) { + if (ServerConfiguration_get_realmsNumber(cfg) == 0) { + return cfg; + } + ServerRealm_set_userClientPairs( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + ServerRealm_get_userClientPairs(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]) + + 1); + ++listencount; + } + else if ((strcmp(helpbuf1, "manage") == 0) || (strcmp(helpbuf1, "manageport") == 0)) { + if (ServerConfiguration_get_realmsNumber(cfg) == 0) { + return cfg; + } + ++managecount; + } + } + } + rewind(file); + + if (listencount != managecount) { + return cfg; + } + + for (i = 0; i < ServerConfiguration_get_realmsNumber(cfg); ++i) { + ServerRealm_set_usersClientsTable(ServerConfiguration_get_realmsTable(cfg)[i], + calloc(ServerRealm_get_userClientPairs(ServerConfiguration_get_realmsTable(cfg)[i]), sizeof(UsrCli*))); + if (ServerRealm_get_usersClientsTable(ServerConfiguration_get_realmsTable(cfg)[i]) == NULL) { + printf("Problem with allocating memory for UsrCli* table... exiting"); + return cfg; + } + for (j = 0; j < ServerRealm_get_userClientPairs(ServerConfiguration_get_realmsTable(cfg)[i]); ++j) { + ServerRealm_get_usersClientsTable(ServerConfiguration_get_realmsTable(cfg)[i])[j] = UsrCli_new(); + if (ServerRealm_get_usersClientsTable(ServerConfiguration_get_realmsTable(cfg)[i])[j] == NULL) { + printf("Problem with allocating memory for UsrCli structure... exiting"); + return cfg; + } + } + } + + ServerConfiguration_set_realmsNumber(cfg, 0); + *status = 0; + + + while (fgets(buff, 256, file) != NULL) { /* third loop - parsing file */ + (*status)++; + state = parse_line(buff, helpbuf1, helpbuf2); + if (helpbuf1[0] == '#') { + memset(buff, 0, 256); + continue; + } + if (state == 1) { + if (strcmp(helpbuf1, "realm")==0) { + ServerConfiguration_set_realmsNumber(cfg, ServerConfiguration_get_realmsNumber(cfg) + 1); + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_SSL(temp); + TYPE_SET_ZLIB(temp); + TYPE_SET_SUPPORTED_MULTI(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + listencount = managecount = 0; + } + else if (ServerConfiguration_get_realmsNumber(cfg) == 0) { + return cfg; + } + else if (strcmp(helpbuf1, "nossl")==0) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_UNSET_SSL(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else if (strcmp(helpbuf1, "nozlib")==0) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_UNSET_ZLIB(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else if (strcmp(helpbuf1, "baseport")==0) { + ServerRealm_set_basePortOn( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + 1); + } + else if (strcmp(helpbuf1, "audit")==0) { + ServerRealm_set_auditOn( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + 1); + } + else if (strcmp(helpbuf1, "dnslookups")==0) { + ServerRealm_set_dnsLookupsOn( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + 1); + } +#ifdef HAVE_LIBPTHREAD + else if (strcmp(helpbuf1, "enableproxy")==0) { + if (ServerRealm_get_tunnelType( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1]) == 0) { + ServerRealm_set_tunnelType( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + 1); + } + else { + return cfg; + } + } +#endif +#ifdef AF_INET6 + else if (strcmp(helpbuf1, "ipv4")==0) { + if (TYPE_IS_UNSPEC(ServerRealm_get_realmType( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1]))) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_IPV4(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else { + return cfg; + } + } + else if (strcmp(helpbuf1, "ipv6")==0) { + if (TYPE_IS_UNSPEC(ServerRealm_get_realmType( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1]))) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_IPV6(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else { + return cfg; + } + } +#endif + else { + return cfg; + } + } + else if (state == 2) { + if (strcmp(helpbuf1, "realm")==0) { + ServerConfiguration_set_realmsNumber(cfg, ServerConfiguration_get_realmsNumber(cfg) + 1); + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_SSL(temp); + TYPE_SET_ZLIB(temp); + TYPE_SET_SUPPORTED_MULTI(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + listencount = managecount = 0; + ServerRealm_set_realmName( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if ((strcmp(helpbuf1, "certificate") == 0) || (strcmp(helpbuf1, "cerfile") == 0)) { + ServerConfiguration_set_certificateFile(cfg, helpbuf2); + } + else if (strcmp(helpbuf1, "cacerfile") == 0) { + ServerConfiguration_set_cacertificateFile(cfg, helpbuf2); + } + else if (strcmp(helpbuf1, "cerdepth") == 0) { + ServerConfiguration_set_sCertificateDepth(cfg, helpbuf2); + } + else if ((strcmp(helpbuf1, "key") == 0) || (strcmp(helpbuf1, "keyfile") == 0)) { + ServerConfiguration_set_keysFile(cfg, helpbuf2); + } + else if (strcmp(helpbuf1, "log")==0) { + tmpbuf = calloc(strlen(helpbuf2)+1, sizeof(char)); + strcpy(tmpbuf, helpbuf2); + addlogtarget(tmpbuf); + } + else if (strcmp(helpbuf1, "dateformat")==0) { + ServerConfiguration_set_dateFormat(cfg, helpbuf2); + } + else if (ServerConfiguration_get_realmsNumber(cfg) == 0) { + return cfg; + } + else if (strcmp(helpbuf1, "hostname")==0) { + ServerRealm_set_hostName( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if ((strcmp(helpbuf1, "listen") == 0) || (strcmp(helpbuf1, "listenport") == 0)) { + UsrCli_set_listenPortName( + ServerRealm_get_usersClientsTable( + ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1])[listencount], helpbuf2); + ++listencount; + } + else if (strcmp(helpbuf1, "pass")==0) { + n = strlen(helpbuf2); + memset(pass, 0, 4); + for (i = 0; i < n; ++i) { + pass[i%4] += helpbuf2[i]; + } + ServerRealm_set_password( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + pass); + } + else if ((strcmp(helpbuf1, "manage") == 0) || (strcmp(helpbuf1, "manageport") == 0)) { + UsrCli_set_managePortName( + ServerRealm_get_usersClientsTable( + ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1])[managecount], helpbuf2); + ++managecount; + } + else if (strcmp(helpbuf1, "users")==0) { + ServerRealm_set_sUsersLimit( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "timeout")==0) { + ServerRealm_set_sTimeout( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "maxidle")==0) { + ServerRealm_set_sMaxIdle( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "clients")==0) { + ServerRealm_set_sClientsLimit( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "raclients")==0) { + ServerRealm_set_sRaClientsLimit( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "usrpcli")==0) { + ServerRealm_set_sUsersPerClient( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "climode")==0) { + ServerRealm_set_sClientMode( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1], + helpbuf2); + } + else if (strcmp(helpbuf1, "proto")==0) { + if (TYPE_IS_SET(ServerRealm_get_realmType( + ServerConfiguration_get_realmsTable(cfg)[ServerConfiguration_get_realmsNumber(cfg) - 1]))) { + return cfg; + } + if (strcmp(helpbuf2, "tcp")==0) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_TCP(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else if (strcmp(helpbuf2, "udp")==0) { + temp = ServerRealm_get_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1]); + TYPE_SET_UDP(temp); + ServerRealm_set_realmType(ServerConfiguration_get_realmsTable(cfg)[ + ServerConfiguration_get_realmsNumber(cfg) - 1], temp); + } + else { + return cfg; + } + } + else { + return cfg; + } + } + memset(buff, 0, 256); + } + + fclose(file); + + *status = 0; + return cfg; +} diff --git a/src/first_run.c b/src/first_run.c new file mode 100644 index 0000000..a023306 --- /dev/null +++ b/src/first_run.c @@ -0,0 +1,403 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/wait.h> +#include <pwd.h> +#include <openssl/rsa.h> +#include <openssl/pem.h> +#include <assert.h> + +static char* home_dir = NULL; +static char* home_dir_store = NULL; +static char* home_dir_key = NULL; +static char* home_dir_cer = NULL; + +typedef struct entry +{ + char *key; + unsigned char *value; +} entryT; + +static +entryT entries[6] = { + {"countryName", (unsigned char*) "PL"}, + {"stateOrProvinceName", (unsigned char*) "War-Maz"}, + {"localityName", (unsigned char*) "Olsztyn"}, + {"organizationName", (unsigned char*) "gray-world.net"}, + {"organizationalUnitName", (unsigned char*) "APF team"}, + {"commonName", (unsigned char*) "Jeremian <jeremian [at] poczta [dot] fm>"}, +}; + +/* + * Function name: callback + * Description: Prints the info about rsa key generation events. + * Arguments: i, j, k - described in the manual page about RSA_generate_key + */ + +static void +callback(int i, int j, void* k) +{ + if (k == NULL) { + printf("%d", i); + fflush(stdout); + } +} + +/* + * Function name: create_apf_dir + * Description: Creates .apf directory in ~/ or apf directory locally. + * Arguments: type - type of the directory to create: + * 0 - .apf in ~/ + * 1 - apf in current dir + * Returns: 0 - success, + * 1 - problems with fetching user info, + * 2 - home directory is not set, + * 3 - calloc failure, + * 4 - directory creation failure. + */ + +int +create_apf_dir(char type) +{ + int length; + struct stat buf; + struct passwd *user = getpwuid(getuid()); + if (type == 0) { + if (user == NULL) { + return 1; /* some problems with fetching user info*/ + } + if (user->pw_dir == NULL) { + return 2; /* home directory is not set? */ + } + if (home_dir) { + free(home_dir); + home_dir = NULL; + } + length = strlen(user->pw_dir); + home_dir = calloc(1, length + 6); + if (home_dir == NULL) { + return 3; /* calloc failed */ + } + strcpy(home_dir, user->pw_dir); + if (home_dir[length] == '/') { + strcpy(&home_dir[length], ".apf"); + } + else { + strcpy(&home_dir[length], "/.apf"); + } + if (stat(home_dir, &buf)) { + if (mkdir(home_dir, 0700)) { + return 4; /* creating directory failed */ + } + } + } + else { + if (home_dir) { + free(home_dir); + home_dir = NULL; + } + home_dir = calloc(1, 4); + if (home_dir == NULL) { + return 3; /* calloc failed */ + } + strcpy(home_dir, "apf"); + if (stat(home_dir, &buf)) { + if (mkdir(home_dir, 0700)) { + return 4; /* creating directory failed */ + } + } + } + return 0; +} + +/* + * Function name: create_publickey_store + * Description: Creates the file to store information about public keys. + * Arguments: storefile - the pointer to filename + * Returns: 0 - success, + * >0 - failure. + */ + +int +create_publickey_store(char** storefile) +{ + int store_length, home_length; + struct stat buf; + FILE* store_file; + assert(storefile != NULL); + assert((*storefile) != NULL); + /* check in local directory first */ + if (stat(*storefile, &buf) == 0) { + return 0; + } + /* check in home_dir */ + store_length = strlen(*storefile); + home_length = strlen(home_dir); + if (home_dir_store) { + free(home_dir_store); + home_dir_store = NULL; + } + home_dir_store = calloc(1, home_length + store_length + 2); + if (home_dir_store == NULL) { + return 1; /* calloc failed */ + } + strcpy(home_dir_store, home_dir); + home_dir_store[home_length] = '/'; + strcpy(&home_dir_store[home_length+1], *storefile); + *storefile = home_dir_store; + store_file = fopen(home_dir_store, "a"); + if (store_file == NULL) { + return 1; + } + fclose(store_file); + if (stat(home_dir_store, &buf) == 0) { + return 0; + } + return 2; +} + +/* + * Function name: generate_rsa_key + * Description: Generates the RSA key. + * Arguments: keyfile - the pointer to filename + * Returns: 0 - success, + * >0 - failure. + */ + +int +generate_rsa_key(char** keyfile) +{ + int key_length, home_length; + RSA* rsa_key; + FILE* rsa_file; + struct stat buf; + assert(keyfile != NULL); + assert((*keyfile) != NULL); + /* check in local directory first */ + if (stat(*keyfile, &buf) == 0) { + return 0; + } + /* check in home_dir */ + key_length = strlen(*keyfile); + home_length = strlen(home_dir); + if (home_dir_key) { + free(home_dir_key); + home_dir_key = NULL; + } + home_dir_key = calloc(1, home_length + key_length + 2); + if (home_dir_key == NULL) { + return 1; /* calloc failed */ + } + strcpy(home_dir_key, home_dir); + home_dir_key[home_length] = '/'; + strcpy(&home_dir_key[home_length+1], *keyfile); + *keyfile = home_dir_key; + if (stat(home_dir_key, &buf) == 0) { + return 0; + } + /* have to generate the key */ + printf("generating rsa key: 2048 bits\n"); + rsa_key = RSA_generate_key(2048, 65537, callback, NULL); + if (RSA_check_key(rsa_key)==1) { + printf(" OK!\n"); + } + else { + printf(" FAILED!\n"); + return 1; + } + + rsa_file = fopen(home_dir_key, "a"); + PEM_write_RSAPrivateKey(rsa_file, rsa_key, NULL, NULL, 0, NULL, NULL); + fclose(rsa_file); + return 0; +} + +/* + * Function name: generate_certificate + * Description: Generates X509 certificate. + * Arguments: cerfile - the pointer to filename + * keyfile - the name of the file with key + * Returns: 0 - success, + * >0 - failure. + */ + +int +generate_certificate(char** cerfile, char* keyfile) +{ + int cer_length, home_length, i; + struct stat buf; + X509* cert; + X509_REQ* req; + X509_NAME* subj; + RSA* rsa_key; + EVP_PKEY* pkey; + const EVP_MD *digest; + FILE* fp; + assert(cerfile != NULL); + assert((*cerfile) != NULL); + assert(keyfile != NULL); + /* check in local directory first */ + if (stat(*cerfile, &buf) == 0) { + return 0; + } + /* check in home_dir */ + cer_length = strlen(*cerfile); + home_length = strlen(home_dir); + if (home_dir_cer) { + free(home_dir_cer); + home_dir_cer = NULL; + } + home_dir_cer = calloc(1, home_length + cer_length + 2); + if (home_dir_cer == NULL) { + return 1; /* calloc failed */ + } + strcpy(home_dir_cer, home_dir); + home_dir_cer[home_length] = '/'; + strcpy(&home_dir_cer[home_length+1], *cerfile); + *cerfile = home_dir_cer; + if (stat(home_dir_cer, &buf) == 0) { + return 0; + } + /* have to generate the certificate */ + printf("generating self signed certificate\n"); + fp = fopen(keyfile, "r"); + if (fp == NULL) { + return 2; /* can't open keyfile */ + } + rsa_key = PEM_read_RSAPrivateKey(fp, NULL, NULL, NULL); + fclose(fp); + if (rsa_key == NULL) { + return 3; /* can't read RSAPrivateKey */ + } + pkey = EVP_PKEY_new(); + if (pkey == NULL) { + return 4; /* creating new pkey failed */ + } + if (EVP_PKEY_set1_RSA(pkey, rsa_key) == 0) { + return 5; /* setting rsa key failed */ + } + req = X509_REQ_new(); + if (req == NULL) { + return 6; /* creating new request failed */ + } + X509_REQ_set_pubkey(req, pkey); + subj = X509_NAME_new(); + if (subj == NULL) { + return 7; /* creating new subject name failed */ + } + + for (i = 0; i < 6; i++) + { + int nid; + X509_NAME_ENTRY *ent; + + if ((nid = OBJ_txt2nid(entries[i].key)) == NID_undef) + { + return 8; /* finding NID for a key failed */ + } + ent = X509_NAME_ENTRY_create_by_NID(NULL, nid, MBSTRING_ASC,entries[i].value, -1); + if (ent == NULL) { + return 9; /* creating name entry from NID failed */ + } + if (X509_NAME_add_entry(subj, ent, -1, 0) == 0) { + return 10; /* adding entry to name failed */ + } + } + if (X509_REQ_set_subject_name(req, subj) == 0) { + return 11; /* adding subject to request failed */ + } + + digest = EVP_sha1(); + + if (X509_REQ_sign(req, pkey, digest) == 0) { + return 12; /* signing request failed */ + } + + cert = X509_REQ_to_X509(req, 1000, pkey); + + if (X509_set_version(cert, 2L) == 0) { + return 13; /* setting certificate version failed */ + } + ASN1_INTEGER_set(X509_get_serialNumber(cert), 1); + + if (cert == NULL) { + return 14; /* creating certificate failed */ + } + + if (X509_sign(cert, pkey, digest) == 0) { + return 15; /* signing failed */ + } + + fp = fopen(home_dir_cer, "w"); + if (fp == NULL) { + return 16; /* writing certificate failed */ + } + PEM_write_X509(fp, cert); + fclose(fp); + + EVP_PKEY_free(pkey); + X509_REQ_free(req); + X509_free(cert); + return 0; +} + +/* + * Function name: get_store_filename + * Description: Returns the name of the file for storing information about public keys. + * Returns: The name of the file for storing information about public keys. + */ + +char* +get_store_filename() +{ + return home_dir_store; +} + +/* + * Function name: get_key_filename + * Description: Returns the name of the file with key. + * Returns: The name of the file with key. + */ + +char* +get_key_filename() +{ + return home_dir_key; +} + +/* + * Function name: get_cer_filename + * Description: Returns the name of the file with certificate. + * Returns: The name of the file with certificate. + */ + +char* +get_cer_filename() +{ + return home_dir_cer; +} diff --git a/src/first_run.h b/src/first_run.h new file mode 100644 index 0000000..4fcb5d8 --- /dev/null +++ b/src/first_run.h @@ -0,0 +1,33 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_FIRST_RUN_H +#define _JS_FIRST_RUN_H + +int create_apf_dir(char type); +int create_publickey_store(char**); +int generate_rsa_key(char**); +int generate_certificate(char**, char*); +char* get_store_filename(); +char* get_key_filename(); +char* get_cer_filename(); + +#endif + diff --git a/src/header_buffer_struct.c b/src/header_buffer_struct.c new file mode 100644 index 0000000..94f852b --- /dev/null +++ b/src/header_buffer_struct.c @@ -0,0 +1,127 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "header_buffer_struct.h" + +/* + * Function name: HeaderBuffer_new + * Description: Create and initialize new HeaderBuffer structure. + * Returns: Pointer to newly created HeaderBuffer structure. + */ + +HeaderBuffer* +HeaderBuffer_new() +{ + HeaderBuffer* tmp = calloc(1, sizeof(HeaderBuffer)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: HeaderBuffer_free + * Description: Free the memory allocated for HeaderBuffer structure. + * Arguments: hb - pointer to pointer to HeaderBuffer structure + */ + +void +HeaderBuffer_free(HeaderBuffer** hb) +{ + assert(hb != NULL); + if (hb == NULL) { + return; + } + assert((*hb) != NULL); + if ((*hb) == NULL) { + return; + } + free((*hb)); + (*hb) = NULL; +} + +/* + * Function name: HeaderBuffer_to_read + * Description: Evaluate how much bytes are needed to fill the header buffer. + * Arguments: hb - pointer to HeaderBuffer structure + * Returns: How much bytes are needed to fill the header buffer. + */ + +int +HeaderBuffer_to_read(HeaderBuffer* hb) +{ + assert(hb != NULL); + if (hb == NULL) { + return -1; + } + return (5 - hb->readed); +} + +/* + * Function name: HeaderBuffer_store + * Description: Store readed part of the header in the buffer. + * Arguments: hb - pointer to HeaderBuffer structure + * buff - reader bytes + * n - how much bytes were readed + */ + +void +HeaderBuffer_store(HeaderBuffer* hb, unsigned char* buff, int n) +{ + assert(hb != NULL); + if (hb == NULL) { + return; + } + assert((hb->readed + n) <= 5); + if ((hb->readed + n) > 5) { + return; + } + assert(n > 0); + if (n <= 0) { + return; + } + memcpy(&hb->tab[hb->readed], buff, n); + hb->readed += n; +} + +/* + * Function name: HeaderBuffer_restore + * Description: Restore the full header from the buffer. It's not checked, if the full header is in the buffer. + * Arguments: hb - pointer to HeaderBuffer structure + * buff - place to restore the full header to + */ + +void +HeaderBuffer_restore(HeaderBuffer* hb, unsigned char* buff) +{ + assert(hb != NULL); + if (hb == NULL) { + return; + } + memcpy(buff, hb->tab, 5); + hb->readed = 0; +} diff --git a/src/header_buffer_struct.h b/src/header_buffer_struct.h new file mode 100644 index 0000000..f186dfd --- /dev/null +++ b/src/header_buffer_struct.h @@ -0,0 +1,39 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_HEADER_BUFFER_STRUCT_H +#define _JS_HEADER_BUFFER_STRUCT_H + +typedef struct { + unsigned char tab[5]; + int readed; +} HeaderBuffer; + +/* 'constructor' */ +HeaderBuffer* HeaderBuffer_new(); +/* 'destructor' */ +void HeaderBuffer_free(HeaderBuffer** hb); +/* other */ +int HeaderBuffer_to_read(HeaderBuffer* hb); +void HeaderBuffer_store(HeaderBuffer* hb, unsigned char* buff, int n); +void HeaderBuffer_restore(HeaderBuffer* hb, unsigned char* buff); + +#endif + diff --git a/src/http_proxy_client.c b/src/http_proxy_client.c new file mode 100644 index 0000000..157d009 --- /dev/null +++ b/src/http_proxy_client.c @@ -0,0 +1,565 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "http_proxy_functions.h" +#include "http_proxy_client.h" +#include "thread_management.h" +#include "network.h" +#include "stats.h" +#include "logging.h" +#include "base64.h" + +#ifdef HAVE_LIBPTHREAD +typedef struct { + int sockfd; + char *host; + char *serv; + HttpProxyOptions* hpo; + char type; + SSL_CTX* ctx; +} proxy_argT; + +/* + * Function name: clean_return + * Description: Closes the connection and exits the thread. + * Arguments: sockfd - the descriptor of the connection + */ + +static void +clean_return(int sockfd) +{ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http proxy: clean_return"); + close(sockfd); + pthread_exit(NULL); +} + +/* + * Function name: http_proxy_client + * Description: Function responsible for the client part of the http proxy connection. + * Arguments: vptr - the structure with all the information needed for http proxy tunnel + */ + +void* +http_proxy_client(void *vptr) +{ + char tab[9000]; + connection conn; + header hdr; + int j, n, maxfdp1; + fd_set rset, allset; + struct timeval tv; + int timeout = 5; + int tmp; + char *host, *serv, *proxyname, *proxyport, *credentials, *name = ""; + char b64cred[100]; + char type, authtype, https; + SSL_CTX* ctx; + proxy_argT *proxy_argptr; + + start_critical_section(); + proxy_argptr = (proxy_argT *) vptr; + + host = proxy_argptr->host; + serv = proxy_argptr->serv; + proxyname = HttpProxyOptions_get_proxyname(proxy_argptr->hpo); + proxyport = HttpProxyOptions_get_proxyport(proxy_argptr->hpo); + credentials = HttpProxyOptions_get_proxyauth_cred(proxy_argptr->hpo); + type = proxy_argptr->type; + authtype = HttpProxyOptions_get_proxyauth_type(proxy_argptr->hpo); + conn.sockfd = proxy_argptr->sockfd; + https = HttpProxyOptions_is_https(proxy_argptr->hpo); + ctx = proxy_argptr->ctx; + + broadcast_condition(); + end_critical_section(); + + conn.postFd = SslFd_new(); + conn.getFd = SslFd_new(); + conn.tmpFd = SslFd_new(); + if ((conn.postFd == NULL) || (conn.getFd == NULL) || (conn.tmpFd == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + + if (https) { + name = "s"; + SslFd_set_ssl(conn.postFd, SSL_new(ctx)); + SslFd_set_ssl(conn.getFd, SSL_new(ctx)); + SslFd_set_ssl(conn.tmpFd, SSL_new(ctx)); + if ((SslFd_get_ssl(conn.postFd) == NULL) || + (SslFd_get_ssl(conn.getFd) == NULL) || + (SslFd_get_ssl(conn.tmpFd) == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + } + + if (authtype == PROXYAUTH_TYPE_WRONG) { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "Wrong type of proxy authorizaton --> switching to no authorization"); + credentials = NULL; + } + + if (credentials) { + if (b64_ntop((unsigned char*)credentials, strlen(credentials), b64cred, 100) == -1) { + aflog(LOG_T_MAIN, LOG_I_ERR, + "Cannot encode credentials for proxy authorization"); + b64cred[0] = 0; + } + else { + if (authtype == PROXYAUTH_TYPE_NOTSET) { + authtype = PROXYAUTH_TYPE_BASIC; + } + } + } + + FD_ZERO(&allset); + tv.tv_usec = 0; + tv.tv_sec = timeout; + + memset(conn.id, 0, 10); + for (j = 0; j < 9; ++j) { + conn.id[j] = myrand(65, 90); + } + conn.id[9] = 0; + + /* postfd */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: connecting (postfd)...", name); + if (ip_connect(&tmp, proxyname, proxyport, type, NULL, NULL)) { + clean_return(conn.sockfd); + } + SslFd_set_fd(conn.postFd, tmp); + if (https) { + if (SSL_set_fd(SslFd_get_ssl(conn.postFd), SslFd_get_fd(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: Problem with initializing ssl"); + clean_return(conn.sockfd); + } + if (SSL_connect(SslFd_get_ssl(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: SSL_connect has failed"); + clean_return(conn.sockfd); + } + } + + memset(tab, 0, 9000); + switch (authtype) { + case PROXYAUTH_TYPE_BASIC: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n" + "Proxy-Authorization: Basic %s\r\n\r\n", host, serv, conn.id, host, serv, b64cred); + break; + default: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n\r\n", host, serv, conn.id, host, serv); + } + j = strlen (tab); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing POST request...", name); + if (http_write(https, conn.postFd, (unsigned char*) tab, j) <= 0) { + clean_return(conn.sockfd); + } + + /* getfd */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: connecting (getfd)...", name); + if (ip_connect(&tmp, proxyname, proxyport, type, NULL, NULL)) { + clean_return(conn.sockfd); + } + SslFd_set_fd(conn.getFd, tmp); + if (https) { + if (SSL_set_fd(SslFd_get_ssl(conn.getFd), SslFd_get_fd(conn.getFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: Problem with initializing ssl"); + clean_return(conn.sockfd); + } + if (SSL_connect(SslFd_get_ssl(conn.getFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: SSL_connect has failed"); + clean_return(conn.sockfd); + } + } + + memset(tab, 0, 9000); + switch (authtype) { + case PROXYAUTH_TYPE_BASIC: + sprintf(tab, + "GET http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Connection: close\r\n" + "Proxy-Authorization: Basic %s\r\n\r\n", host, serv, conn.id, host, serv, b64cred); + break; + default: + sprintf(tab, + "GET http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Connection: close\r\n\r\n", host, serv, conn.id, host, serv); + } + j = strlen (tab); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing GET request...", name); + if (http_write(https, conn.getFd, (unsigned char*) tab, j) <= 0) { + clean_return(conn.sockfd); + } + + set_fd(conn.sockfd, &maxfdp1, &allset); + set_fd(SslFd_get_fd(conn.postFd), &maxfdp1, &allset); + set_fd(SslFd_get_fd(conn.getFd), &maxfdp1, &allset); + conn.state = C_OPEN; + + memset(tab, 0, 9000); + + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: parsing header from getfd", name); + if (parse_header(conn.getFd, tab, &hdr, https)) { + clean_return(conn.sockfd); + } + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: checking hdr.type", name); + if (hdr.type != H_TYPE_OK) { + clean_return(conn.sockfd); + } + if (hdr.length) { + conn.received += hdr.length; + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: reading message...", name); + if (read_message(conn.sockfd, hdr.length, &conn, tab, hdr.ptr)) { + clean_return(conn.sockfd); + } + } + + while (1) { + if ((conn.state == C_OPEN) && (!(FD_ISSET(conn.sockfd, &allset)))) { + FD_SET(conn.sockfd, &allset); + } + rset = allset; + + if (select(maxfdp1, &rset, NULL, NULL, &tv) == 0) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: timeout", name); + tv.tv_sec = timeout; + if (conn.sent_ptr+1 >= 90000) { + if (conn.state == C_CLOSED) { + continue; + } + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: send T", name); + http_write(https, conn.postFd, (unsigned char*) "T", 1); + conn.sent_ptr = 0; + clear_sslFd(conn.postFd, &allset); + /* postfd */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: connecting (postfd)...", name); + if (ip_connect(&tmp, proxyname, proxyport, type, NULL, NULL)) { + clean_return(conn.sockfd); + } + SslFd_set_fd(conn.postFd, tmp); + if (https) { + if (SSL_set_fd(SslFd_get_ssl(conn.postFd), SslFd_get_fd(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: Problem with initializing ssl"); + clean_return(conn.sockfd); + } + if (SSL_connect(SslFd_get_ssl(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: SSL_connect has failed"); + clean_return(conn.sockfd); + } + } + + memset(tab, 0, 9000); + switch (authtype) { + case PROXYAUTH_TYPE_BASIC: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n" + "Proxy-Authorization: Basic %s\r\n\r\n", host, serv, conn.id, host, serv, b64cred); + break; + default: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n\r\n", host, serv, conn.id, host, serv); + } + j = strlen (tab); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing POST request...", name); + if (http_write(https, conn.postFd, (unsigned char *) tab, j) <= 0) { + clean_return(conn.sockfd); + } + conn.sent_ptr = 0; + conn.ptr = 0; + conn.length = 0; + conn.state = C_CLOSED; + + set_fd(SslFd_get_fd(conn.postFd), &maxfdp1, &allset); + } + else { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: send T", name); + http_write(https, conn.postFd, (unsigned char *) "T", 1); + conn.sent_ptr += 1; + } + continue; + } + + /* sockfd */ + if (FD_ISSET(conn.sockfd, &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(conn.sockfd)", name); + n = read(conn.sockfd, conn.buf+5, 8995); + if (n <= 0) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: send Q", name); + http_write(https, conn.postFd, (unsigned char *) "Q", 1); + clean_return(conn.sockfd); + } + if ((conn.state == C_CLOSED) && (conn.sent_ptr > 70000)) { + FD_CLR(conn.sockfd, &allset); + } + conn.buf[0] = 'M'; + tmp = htonl(n); + memcpy(&conn.buf[1], &tmp, 4); + if (conn.sent_ptr+5 + n >= 90000) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: send message", name); + http_write(https, conn.postFd, (unsigned char *) conn.buf, 90000 - conn.sent_ptr); + conn.ptr = 90000 - conn.sent_ptr; + conn.length = 5+n - conn.ptr; + conn.sent_ptr = 0; + clear_sslFd(conn.postFd, &allset); + + /* postfd */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: connecting (postfd)...", name); + if (ip_connect(&tmp, proxyname, proxyport, type, NULL, NULL)) { + clean_return(conn.sockfd); + } + SslFd_set_fd(conn.postFd, tmp); + if (https) { + if (SSL_set_fd(SslFd_get_ssl(conn.postFd), SslFd_get_fd(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: Problem with initializing ssl"); + clean_return(conn.sockfd); + } + if (SSL_connect(SslFd_get_ssl(conn.postFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: SSL_connect has failed"); + clean_return(conn.sockfd); + } + } + + memset(tab, 0, 9000); + switch (authtype) { + case PROXYAUTH_TYPE_BASIC: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n" + "Proxy-Authorization: Basic %s\r\n\r\n", host, serv, conn.id, host, serv, b64cred); + break; + default: + sprintf(tab, + "POST http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n\r\n", host, serv, conn.id, host, serv); + } + j = strlen (tab); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing POST request...", name); + if (http_write(https, conn.postFd, (unsigned char *) tab, j) <= 0) { + clean_return(conn.sockfd); + } + if (conn.length > 0) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing old data...", name); + if (http_write(https, conn.postFd, (unsigned char *) (conn.buf+conn.ptr), conn.length) <= 0) { + clean_return(conn.sockfd); + } + } + conn.sent_ptr = conn.length; + conn.ptr = 0; + conn.length = 0; + conn.state = C_CLOSED; + + set_fd(SslFd_get_fd(conn.postFd), &maxfdp1, &allset); + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: send message", name); + http_write(https, conn.postFd, (unsigned char *) conn.buf, 5+n); + conn.sent_ptr += 5+n; + } + } + + /* getfd */ + if (FD_ISSET(SslFd_get_fd(conn.getFd), &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(conn.getfd)", name); + n = http_read(https, conn.getFd, (unsigned char*) tab, 9000); + conn.received += n; + if (n == 0) { + conn.received = 0; + clear_sslFd(conn.getFd, &allset); + + /* getfd */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: connecting (getfd)...", name); + if (ip_connect(&tmp, proxyname, proxyport, type, NULL, NULL)) { + clean_return(conn.sockfd); + } + SslFd_set_fd(conn.getFd, tmp); + if (https) { + if (SSL_set_fd(SslFd_get_ssl(conn.getFd), SslFd_get_fd(conn.getFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: Problem with initializing ssl"); + clean_return(conn.sockfd); + } + if (SSL_connect(SslFd_get_ssl(conn.getFd)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "https proxy: SSL_connect has failed"); + clean_return(conn.sockfd); + } + } + + memset(tab, 0, 9000); + switch (authtype) { + case PROXYAUTH_TYPE_BASIC: + sprintf(tab, + "GET http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Connection: close\r\n" + "Proxy-Authorization: Basic %s\r\n\r\n", host, serv, conn.id, host, serv, b64cred); + break; + default: + sprintf(tab, + "GET http://%s:%s/yahpt.html?id=%s HTTP/1.1\r\n" + "Host: %s:%s\r\n" + "Connection: close\r\n\r\n", host, serv, conn.id, host, serv); + } + j = strlen (tab); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: writing GET request...", name); + if (http_write(https, conn.getFd, (unsigned char *) tab, j) <= 0) { + clean_return(conn.sockfd); + } + memset(tab, 0, 9000); + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: parsing header from getfd", name); + if (parse_header(conn.getFd, tab, &hdr, https)) { + clean_return(conn.sockfd); + } + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: checking hdr.type", name); + if (hdr.type != H_TYPE_OK) { + clean_return(conn.sockfd); + } + + set_fd(SslFd_get_fd(conn.getFd), &maxfdp1, &allset); + if (hdr.length) { + conn.received += hdr.length; + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: reading message...", name); + if (read_message(conn.sockfd, hdr.length, &conn, tab, hdr.ptr)) { + clean_return(conn.sockfd); + } + } + } + else { + if (read_message(conn.sockfd, n, &conn, tab, 0)) { + clean_return(conn.sockfd); + } + } + } + + /* postfd */ + if (FD_ISSET(SslFd_get_fd(conn.postFd), &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(conn.postfd) --> clean_return", name); + clear_sslFd(conn.postFd, &allset); + clean_return(conn.sockfd); + } + } + clean_return(conn.sockfd); +} + +/* + * Function name: initialize_http_proxy_client + * Description: Initializes the thread responsible for http proxy connection. + * Arguments: sockfd - the new connection descriptor will be stored here + * cr - the pointer to ClientRealm structure + * ctx - the pointer to SSL_CTX structure + * Returns: 0 - success, + * !0 - failure. + */ + +int +initialize_http_proxy_client(int* sockfd, ClientRealm* cr, SSL_CTX* ctx) +{ + int retval; + int sockets[2]; + pthread_t proxy_thread; + static proxy_argT arg; + + if (socketpair(AF_UNIX, SOCK_STREAM, 0, sockets)) { + return 1; + } + (*sockfd) = sockets[0]; + + if (HttpProxyOptions_get_proxyname(ClientRealm_get_httpProxyOptions(cr)) == NULL) { + return 1; + } + + start_critical_section(); + + arg.host = ClientRealm_get_serverName(cr); + arg.serv = ClientRealm_get_managePort(cr); + arg.hpo = ClientRealm_get_httpProxyOptions(cr); + arg.type = ClientRealm_get_ipFamily(cr); + arg.sockfd = sockets[1]; + arg.ctx = ctx; + + retval = pthread_create(&proxy_thread, NULL, &http_proxy_client, &arg); + + wait_for_condition(); + + end_critical_section(); + + return retval; +} + +#endif diff --git a/src/http_proxy_client.h b/src/http_proxy_client.h new file mode 100644 index 0000000..15506c7 --- /dev/null +++ b/src/http_proxy_client.h @@ -0,0 +1,29 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "http_proxy_options_struct.h" +#include "client_realm_struct.h" + +#ifndef _JS_HTTP_PROXY_CLIENT_H +#define _JS_HTTP_PROXY_CLIENT_H + +int initialize_http_proxy_client(int* sockfd, ClientRealm* cr, SSL_CTX* ctx); + +#endif diff --git a/src/http_proxy_functions.c b/src/http_proxy_functions.c new file mode 100644 index 0000000..e7bef6f --- /dev/null +++ b/src/http_proxy_functions.c @@ -0,0 +1,410 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "http_proxy_functions.h" +#include "network.h" +#include "stats.h" +#include "logging.h" + +static char isseed; + +/* + * Function name: myrand + * Description: Returns the pseudo-random number from the given range. + * If the lower and upper bounds are the same, the pseudo-random + * number is returned from the range (-RAND_MAX, -RAND_MAX+down) + * or (down, RAND_MAX). + * Arguments: down - the lower bound of the range + * up - the upper bound of the range + * Returns: The pseudo-random number from the given range. + */ + +int +myrand(int down, int up) +{ + struct timeval tv; + if (!isseed) { + gettimeofday(&tv, 0); + srand(tv.tv_sec); + isseed = 1; + } + return ( down + ( rand() % (up - down + 1) ) ); +} + +/* + * Function name: mysleep + * Description: Sleeps for the given amount of milliseconds. + * Arguments: time - the amount of milliseconds to sleep for + */ + +void +mysleep(double time) +{ + struct timeval tv; + tv.tv_sec = (int) time; + tv.tv_usec = (int)(time * 1000000)%1000000; + select(0, NULL, NULL, NULL, &tv); +} + +/* + * Function name: delete_user + * Description: Deletes the user's connection from the http proxy connections. + * Arguments: cnts - the connection to remove + * i - the user's number + * allset - the set of file descriptors + */ + +void +delete_user(connection* cnts, int i, fd_set* allset) +{ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http proxy: delete_user(%d)", i); + clear_fd(&(cnts[i].sockfd), allset); + if (!(cnts[i].state & C_POST_WAIT)) { + clear_sslFd(cnts[i].postFd, allset); + } + if ((cnts[i].type == 0) && (!(cnts[i].state & C_GET_WAIT))) { + clear_sslFd(cnts[i].getFd, allset); + } + cnts[i].state = C_CLOSED; + cnts[i].sent_ptr = cnts[i].ptr = cnts[i].length = 0; + cnts[i].type = 0; +} + +/* + * Function name: parse_header + * Description: Reads and parses the http header. + * Arguments: sf - the pointer to SslFd structure + * tab - the buffer used for reading the data + * hdr - the pointer to header structure + * https - the flag indicating if the connection is http/https + * Returns: 0 - success, + * 1 - failure. + */ + +int +parse_header(SslFd* sf, char* tab, header* hdr, char https) +{ + int n, i, j, state = 0; + char tmpt[100]; + if (https) { + n = SSL_read(SslFd_get_ssl(sf), tab, 9000); + } + else { + n = read(SslFd_get_fd(sf), tab, 9000); + } + hdr->allreaded = n; + i = j = 0; + memset(tmpt, 0, 100); + hdr->ptr = 0; + hdr->length = 0; + while (i < n) { + if (j == 99) + return 1; + switch (state) { + case 0: + if ((tab[i] != ' ') && (tab[i] != '\t')) { + tmpt[j] = tab[i]; + ++j; + } + else { + tmpt[j] = 0; + if (strcmp(tmpt, "GET") == 0) { + hdr->type = H_TYPE_GET; + state = 1; + break; + } + if (strcmp(tmpt, "POST") == 0) { + hdr->type = H_TYPE_POST; + state = 1; + break; + } + if ((strcmp(tmpt, "HTTP/1.0") == 0) || (strcmp(tmpt, "HTTP/1.1") == 0)) { + hdr->type = H_TYPE_OK; + state = 6; + break; + } + return 1; + } + break; + case 1: + if ((tab[i] != ' ') && (tab[i] != '\t')) { + tmpt[0] = tab[i]; + j = 1; + state = 2; + } + break; + case 2: + if (tab[i] != '=') { + tmpt[j] = tab[i]; + ++j; + } + else { + tmpt[j] = 0; + if (strcmp(tmpt, "/yahpt.html?id")) { + return 1; + } + j = 0; + state = 3; + } + break; + case 3: + if ((tab[i] != ' ') && (tab[i] != '\t')) { + if (j == 9) { + return 1; + } + hdr->id[j] = tab[i]; + ++j; + } + else { + if (j != 9) { + return 1; + } + hdr->id[j] = 0; + state = 4; + } + break; + case 4: + if (tab[i] == '\n') + state = 5; + break; + case 5: + if (tab[i] == '\n') { + hdr->ptr = i+1; + hdr->length = n - hdr->ptr; + return 0; + } + if (tab[i] != '\r') { + state = 4; + } + break; + case 6: + if ((tab[i] != ' ') && (tab[i] != '\t')) { + tmpt[0] = tab[i]; + j = 1; + state = 7; + } + break; + case 7: + if ((tab[i] == ' ') || (tab[i] == '\t')) { + tmpt[j] = 0; + if (strcmp(tmpt, "200")) { + return 1; + } + state = 4; + } + else { + tmpt[j] = tab[i]; + ++j; + } + break; + } + ++i; + } + return 1; +} + +/* + * Function name: set_fd + * Description: Starts watching the file descriptor. + * Arguments: fd - the file descriptor + * maxfdp1 - the upper limit of the file descriptor numbers + * allset - the set of file descriptors + */ + +void +set_fd(int fd, int* maxfdp1, fd_set* allset) +{ + FD_SET(fd, allset); + (*maxfdp1) = ((*maxfdp1) > fd) ? (*maxfdp1) : (fd + 1); +} + +/* + * Function name: close_fd + * Description: Closes the file descriptor. + * Arguments: fd - the file descriptor to close + */ + +void +close_fd(int* fd) +{ + close(*fd); +} + +/* + * Function name: clear_fd + * Description: Removes the file descriptor from the set and closes it. + * Arguments: fd - the file descriptor to remove and close + * set - the set of file descriptors + */ + +void +clear_fd(int* fd, fd_set* set) +{ + FD_CLR(*fd, set); + close_fd(fd); +} + +/* + * Function name: read_message + * Description: Reads the message from the http proxy connection and writes it + * to the file descriptor. + * Arguments: fd - the file descriptor + * length - the length of the buffer + * client - the http proxy connection + * tab - the buffer with the readed data + * ptr - the offset from which the data reading will start + * Returns: 0 - success, + * 1 - failure. + */ + +int +read_message(int fd, int length, connection* client, char* tab, int ptr) +{ + int j = 0; + int tmp = 0; + while (j < length) { + if (client->curreceived + length-j > client->toreceive) { + if (client->toreceive - client->curreceived > 0) { + writen(fd, (unsigned char*) (tab+ptr+j), client->toreceive - client->curreceived); + j += client->toreceive - client->curreceived; + client->curreceived += client->toreceive - client->curreceived; + } + if (client->read_state == 0) { + switch (tab[ptr + j]) { + case 'M': { + if (j + 5 <= length) { + memcpy(&tmp, &tab[ptr + j + 1], 4); + client->toreceive = ntohl(tmp); + client->curreceived = 0; + j += 5; + } + else if (j + 1 < length) { + memcpy(client->readed_length, &tab[ptr + j + 1], length - j - 1); + client->read_state = length - j; + j += length - j; + } + else { + ++j; + client->read_state = 1; + } + break; + } + case 'T': { + ++j; + break; + } + case 'A': { + ++j; + if (client->state == C_CLOSED) { + client->state = C_OPEN; + } + break; + } + default: { + return 1; + } + } + } + else { + if (j + 5 - client->read_state <= length) { + memcpy(&client->readed_length[client->read_state-1], &tab[ptr + j], 5 - client->read_state); + memcpy(&tmp, client->readed_length, 4); + client->toreceive = ntohl(tmp); + client->curreceived = 0; + j += 5 - client->read_state; + client->read_state = 0; + } + else { + memcpy(&client->readed_length[client->read_state-1], &tab[ptr + j], length - j); + client->read_state += length - j; + j += length -j; + } + } + } + else if (length-j > 0) { + client->curreceived += length-j; + writen(fd, (unsigned char*) (tab+ptr+j), length-j); + j += length-j; + } + } + return 0; +} + +/* + * Function name: clear_sslFd + * Description: Close the socket encapsulated in SslFd structure, remove this file descriptor + * from fd_set and clear ssl structure. + * Arguments: sf - pointer to SslFd structure + * set - pointer to fd_set structure + */ + +void +clear_sslFd(SslFd* sf, fd_set* set) +{ + clear_fd((&(sf->fd)), set); + if (SslFd_get_ssl(sf)) { + SSL_clear(SslFd_get_ssl(sf)); + } +} + +/* + * Function name: http_write + * Description: Write the message via http/https proxy. + * Arguments: https - if the https proxy will be used instead of http proxy + * sf - pointer to SslFd structure + * buf - buffer containing the data to send + * amount - how much butes will be send + * Returns: The result of writen or SSL_writen function, depending on 'https' value. + */ + +int +http_write(char https, SslFd* sf, unsigned char* buf, int amount) +{ + if (https) { + return SSL_writen(SslFd_get_ssl(sf), buf, amount); + } + else { + return writen(SslFd_get_fd(sf), buf, amount); + } +} + +/* + * Function name: http_read + * Description: Read the message via http/https proxy. + * Arguments: https - if the https proxy will be used instead of http proxy + * sf - pointer to SslFd structure + * buf - buffer for the received data + * amount - how much bytes will be received + * Returns: The result of read or SSL_read function, depending on 'https' value. + */ + +int +http_read(char https, SslFd* sf, unsigned char* buf, int amount) +{ + if (https) { + return SSL_read(SslFd_get_ssl(sf), buf, amount); + } + else { + return read(SslFd_get_fd(sf), buf, amount); + } +} diff --git a/src/http_proxy_functions.h b/src/http_proxy_functions.h new file mode 100644 index 0000000..3d29699 --- /dev/null +++ b/src/http_proxy_functions.h @@ -0,0 +1,86 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/time.h> +#include <sys/select.h> +#include <unistd.h> + +#include "ssl_fd_struct.h" + +#ifndef _JS_HTTP_PROXY_FUNCTIONS_H +#define _JS_HTTP_PROXY_FUNCTIONS_H + +#define C_CLOSED 0 +#define C_POST_WAIT 1 +#define C_GET_WAIT 2 +#define C_OPEN 4 +#define C_DELAYED_A 8 + +#define H_TYPE_GET 0 +#define H_TYPE_POST 1 +#define H_TYPE_OK 2 +#define H_TYPE_ERROR 3 + +typedef struct { + char type; + char id[10]; + int ptr; + int length; + int allreaded; +} header; + +typedef struct { + char read_state; + char readed_length[4]; + char state; + char id[10]; + SslFd* postFd; + SslFd* getFd; + int sent_ptr; + int sockfd; + char buf[9000]; + char tmpbuf[9000]; + char tmpstate; + SslFd* tmpFd; + char type; + header tmpheader; + int ptr; + int length; + int curreceived; + int toreceive; + int received; +} connection; + +int myrand(int, int); +void mysleep(double); +int parse_header(SslFd*, char*, header*, char); +int read_message(int, int, connection*, char*, int); +void delete_user(connection*, int, fd_set*); +void set_fd(int, int*, fd_set*); +void close_fd(int*); +void clear_fd(int*, fd_set*); +void clear_sslFd(SslFd*, fd_set*); +int http_write(char, SslFd*, unsigned char*, int); +int http_read(char, SslFd*, unsigned char*, int); + +#endif diff --git a/src/http_proxy_options_struct.c b/src/http_proxy_options_struct.c new file mode 100644 index 0000000..e1dcc4d --- /dev/null +++ b/src/http_proxy_options_struct.c @@ -0,0 +1,254 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "http_proxy_options_struct.h" +#include "string_functions.h" + +/* + * Function name: HttpProxyOptions_new + * Description: Create and initialize new HttpProxyOptions structure. + * Returns: Pointer to newly created HttpProxyOptions structure. + */ + +HttpProxyOptions* +HttpProxyOptions_new() +{ + HttpProxyOptions* tmp = calloc(1, sizeof(HttpProxyOptions)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->proxyauth_type = PROXYAUTH_TYPE_NOTSET; + return tmp; +} + +/* + * Function name: HttpProxyOptions_free + * Description: Free the memory allocated for HttpProxyOptions structure. + * Arguments: hpo - pointer to pointer to HttpProxyOptions structure + */ + +void +HttpProxyOptions_free(HttpProxyOptions** hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + assert((*hpo) != NULL); + if ((*hpo) == NULL) { + return; + } + if ((*hpo)->proxyname) { + free((*hpo)->proxyname); + (*hpo)->proxyname = NULL; + } + if ((*hpo)->proxyport) { + free((*hpo)->proxyport); + (*hpo)->proxyport = NULL; + } + if ((*hpo)->proxyauth_cred) { + free((*hpo)->proxyauth_cred); + (*hpo)->proxyauth_cred = NULL; + } + free((*hpo)); + (*hpo) = NULL; +} + +/* + * Function name: HttpProxyOptions_set_proxyname + * Description: Set name of the http proxy server. + * Arguments: hpo - pointer to HttpProxyOptions structure + * proxyname - name of the http proxy server + */ + +void +HttpProxyOptions_set_proxyname(HttpProxyOptions* hpo, char* proxyname) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + string_cp(&(hpo->proxyname), proxyname); +} + +/* + * Function name: HttpProxyOptions_set_proxyport + * Description: Set port on which http proxy server is listening. + * Arguments: hpo - pointer to HttpProxyOptions structure + * proxyport - port on which http proxy server is listening + */ + +void +HttpProxyOptions_set_proxyport(HttpProxyOptions* hpo, char* proxyport) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + string_cp(&(hpo->proxyport), proxyport); +} + +/* + * Function name: HttpProxyOptions_set_proxyauth_cred + * Description: Set credentials for http proxy server. + * Arguments: hpo - pointer to HttpProxyOptions structure + * proxyauth_cred - credentials for http proxy server + */ + +void +HttpProxyOptions_set_proxyauth_cred(HttpProxyOptions* hpo, char* proxyauth_cred) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + string_cp(&(hpo->proxyauth_cred), proxyauth_cred); +} + +/* + * Function name: HttpProxyOptions_set_proxyauth_type + * Description: Set type of the proxy authorization. + * Arguments: hpo - pointer to HttpProxyOptions structure + * proxyauth_type - type of the proxy authorization + */ + +void +HttpProxyOptions_set_proxyauth_type(HttpProxyOptions* hpo, char proxyauth_type) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + assert(hpo->proxyauth_type == PROXYAUTH_TYPE_NOTSET); + if (hpo->proxyauth_type != PROXYAUTH_TYPE_NOTSET) { + hpo->proxyauth_type = PROXYAUTH_TYPE_WRONG; + return; + } + hpo->proxyauth_type = proxyauth_type; +} + +/* + * Function name: HttpProxyOptions_get_proxyname + * Description: Get name of the http proxy server + * Arguments: hpo - pointer to HttpProxyOptions structure + * Returns: Name of the http proxy server or NULL, if name not set. + */ + +char* +HttpProxyOptions_get_proxyname(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return NULL; + } + return hpo->proxyname; +} + +/* + * Function name: HttpProxyOptions_get_proxyport + * Description: Get port on which http proxy server is listening. + * Arguments: hpo - pointer to HttpProxyOptions structure + * Returns: Port on which http proxy server is listening or NULL, if port not set. + */ + +char* +HttpProxyOptions_get_proxyport(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return NULL; + } + return hpo->proxyport; +} + +/* + * Function name: HttpProxyOptions_get_proxyauth_cred + * Description: Get credentials for http proxy server. + * Arguments: hpo - pointer to HttpProxyOptions structure + * Returns: Credentials for http proxy server or NULL, if not set. + */ + +char* +HttpProxyOptions_get_proxyauth_cred(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return NULL; + } + return hpo->proxyauth_cred; +} + +/* + * Function name: HttpProxyOptions_get_proxyauth_type + * Description: Get type of the proxy authorization. + * Arguments: hpo - pointer to HttpProxyOptions structure + * Returns: Type of the proxy authorization. + */ + +char +HttpProxyOptions_get_proxyauth_type(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return PROXYAUTH_TYPE_WRONG; + } + return hpo->proxyauth_type; +} + +/* + * Function name: HttpProxyOptions_use_https + * Description: Enable use of https proxy instead of http proxy. + * Arguments: hpo - pointer to HttpProxyOptions structure + */ + +void +HttpProxyOptions_use_https(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return; + } + hpo->useHttps = USEHTTPS_ON; +} + +/* + * Function name: HttpProxyOptions_is_https + * Description: Check if the use of https proxy is enabled. + * Arguments: hpo - pointer to HttpProxyOptions structure + * Returns: USEHTTPS_OFF - http proxy will be used + * USEHTTPS_ON - https proxy will be used + */ + +char +HttpProxyOptions_is_https(HttpProxyOptions* hpo) +{ + assert(hpo != NULL); + if (hpo == NULL) { + return USEHTTPS_OFF; + } + return hpo->useHttps; +} diff --git a/src/http_proxy_options_struct.h b/src/http_proxy_options_struct.h new file mode 100644 index 0000000..db0208c --- /dev/null +++ b/src/http_proxy_options_struct.h @@ -0,0 +1,58 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_HTTP_PROXY_OPTIONS_STRUCT_H +#define _JS_HTTP_PROXY_OPTIONS_STRUCT_H + +#define PROXYAUTH_TYPE_NOTSET 0 +#define PROXYAUTH_TYPE_WRONG -1 +#define PROXYAUTH_TYPE_BASIC 1 + +#define USEHTTPS_OFF 0 +#define USEHTTPS_ON 1 + +typedef struct { + char* proxyname; + char* proxyport; + char* proxyauth_cred; + char proxyauth_type; + char useHttps; +} HttpProxyOptions; + +/* 'constructor' */ +HttpProxyOptions* HttpProxyOptions_new(); +/* 'destructor' */ +void HttpProxyOptions_free(HttpProxyOptions** hpo); +/* setters */ +void HttpProxyOptions_set_proxyname(HttpProxyOptions* hpo, char* proxyname); +void HttpProxyOptions_set_proxyport(HttpProxyOptions* hpo, char* proxyport); +void HttpProxyOptions_set_proxyauth_cred(HttpProxyOptions* hpo, char* proxyauth_cred); +void HttpProxyOptions_set_proxyauth_type(HttpProxyOptions* hpo, char proxyauth_type); +/* getters */ +char* HttpProxyOptions_get_proxyname(HttpProxyOptions* hpo); +char* HttpProxyOptions_get_proxyport(HttpProxyOptions* hpo); +char* HttpProxyOptions_get_proxyauth_cred(HttpProxyOptions* hpo); +char HttpProxyOptions_get_proxyauth_type(HttpProxyOptions* hpo); +/* other */ +void HttpProxyOptions_use_https(HttpProxyOptions* hpo); +char HttpProxyOptions_is_https(HttpProxyOptions* hpo); + +#endif + diff --git a/src/http_proxy_server.c b/src/http_proxy_server.c new file mode 100644 index 0000000..17baf5a --- /dev/null +++ b/src/http_proxy_server.c @@ -0,0 +1,585 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "make_ssl_handshake.h" +#include "http_proxy_server.h" +#include "thread_management.h" +#include "stats.h" +#include "logging.h" +#include "network.h" + +#ifdef HAVE_LIBPTHREAD + +typedef struct { + int sockfd; + char *host; + char *serv; + socklen_t *addrlenp; + char type; + int limit; + char https; + SSL_CTX* ctx; +} sproxy_argT; + +/* + * Function name: afserver_connect + * Description: Connects new http proxy connection to the afserver. + * Arguments: sockfd - the file descriptor which will be used for communication with afserver + * afserverfd - the afserver's file descriptor + * cliaddr - pointer to sockaddr structure + * addrlenp - pointer to the length of the sockaddr structure + * type - the type of the connection + */ + +int +afserver_connect(int* sockfd, int afserverfd, struct sockaddr* cliaddr, socklen_t* addrlenp, char type) +{ + int sockets[2]; + if (socketpair(AF_UNIX, SOCK_STREAM, 0, sockets)) { + return 1; + } + if (write(afserverfd, &sockets[0], 4) != 4) { + return 2; + } + if (write(afserverfd, &type, 1) != 1) { + return 3; + } + if (write(afserverfd, addrlenp, 4) != 4) { + return 4; + } + if (write(afserverfd, cliaddr, *addrlenp) != *addrlenp) { + return 5; + } + (*sockfd) = sockets[1]; + return 0; +} + +/* + * Function name: http_proxy_server + * Description: Function responsible for the server part of the http proxy connection. + * Arguments: vptr - the structure with all the information needed for http proxy tunnel. + */ + +void* +http_proxy_server(void *vptr) +{ + int listenfd, afserverfd; + SslFd* connFd; + struct sockaddr* cliaddr; + char tab[9000]; + connection* table; + header hdr; + int i, n, maxfdp1; + fd_set rset, allset; + struct timeval tv; + int maxclients, tmp; + int timeout = 5; + socklen_t *addrlenp; + socklen_t addrlen; + char type, nothttp, https; + char *host, *serv, *name = ""; + SSL_CTX* ctx; + sproxy_argT *proxy_argptr; + + start_critical_section(); + proxy_argptr = (sproxy_argT *) vptr; + + afserverfd = proxy_argptr->sockfd; + host = proxy_argptr->host; + serv = proxy_argptr->serv; + addrlenp = proxy_argptr->addrlenp; + type = proxy_argptr->type; + maxclients = proxy_argptr->limit+1; + https = proxy_argptr->https; + ctx = proxy_argptr->ctx; + + if (https) { + name = "s"; + } + + table = calloc(maxclients, sizeof(connection)); + if (table == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + for (i = 0; i < maxclients; ++i) { + table[i].postFd = SslFd_new(); + table[i].getFd = SslFd_new(); + table[i].tmpFd = SslFd_new(); + if ((table[i].postFd == NULL) || (table[i].getFd == NULL) || (table[i].tmpFd == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + if (https) { + SslFd_set_ssl(table[i].postFd, SSL_new(ctx)); + SslFd_set_ssl(table[i].getFd, SSL_new(ctx)); + SslFd_set_ssl(table[i].tmpFd, SSL_new(ctx)); + if ((SslFd_get_ssl(table[i].postFd) == NULL) || + (SslFd_get_ssl(table[i].getFd) == NULL) || + (SslFd_get_ssl(table[i].tmpFd) == NULL)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + } + } + connFd = SslFd_new(); + if (connFd == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + if (https) { + SslFd_set_ssl(connFd, SSL_new(ctx)); + if (SslFd_get_ssl(connFd) == NULL) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't allocate memory... exiting.", name); + exit(1); + } + } + + if (ip_listen(&listenfd, host, serv, addrlenp, type)) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "http%s proxy: Can't listen on %s:%s", name, host, serv); + exit(1); + } + cliaddr = malloc(*addrlenp); + addrlen = (*addrlenp); + addrlenp = &addrlen; + + broadcast_condition(); + end_critical_section(); + + FD_ZERO(&allset); + FD_SET(listenfd, &allset); + maxfdp1 = listenfd + 1; + tv.tv_usec = 0; + tv.tv_sec = timeout; + + while (1) { + rset = allset; + + if (select(maxfdp1, &rset, NULL, NULL, &tv) == 0) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: timeout", name); + tv.tv_sec = timeout; + for (i = 0; i < maxclients; ++i) { + if ((table[i].state == C_CLOSED) || (table[i].state & C_GET_WAIT) || (table[i].type == 1)) { + continue; + } + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: send T to table[%d].getfd", name, i); + if (table[i].sent_ptr+1 >= 90000) { + http_write(https, table[i].getFd, (unsigned char*) "T", 1); + table[i].sent_ptr = 0; + clear_sslFd(table[i].getFd, &allset); + FD_CLR(table[i].sockfd, &allset); + table[i].state |= C_GET_WAIT; + } + else { + http_write(https, table[i].getFd, (unsigned char*) "T", 1); + table[i].sent_ptr += 1; + } + } + continue; + } + + /* http proxy tunnels */ + for (i = 0; i < maxclients; ++i) { + if ((table[i].state == C_CLOSED) || (table[i].type == 1)) { + continue; + } + + /* sockfd */ + if ((!(table[i].state & C_GET_WAIT)) && (FD_ISSET(table[i].sockfd, &rset))) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(table[%d].sockfd)", name, i); + n = read(table[i].sockfd, table[i].buf+5, 8995); + if (n <= 0) { + http_write(https, table[i].getFd, (unsigned char*) "Q", 1); + delete_user(table, i, &allset); + continue; + } + table[i].buf[0] = 'M'; + tmp = htonl(n); + memcpy(&table[i].buf[1], &tmp, 4); + if (table[i].sent_ptr+5 + n >= 90000) { + http_write(https, table[i].getFd, (unsigned char*) table[i].buf, 90000 - table[i].sent_ptr); + table[i].ptr = 90000 - table[i].sent_ptr; + table[i].length = 5+n - table[i].ptr; + table[i].sent_ptr = 0; + clear_sslFd(table[i].getFd, &allset); + FD_CLR(table[i].sockfd, &allset); + table[i].state |= C_GET_WAIT; + continue; + } + else { + http_write(https, table[i].getFd, (unsigned char*) table[i].buf, n+5); + table[i].sent_ptr += n+5; + } + } + + /* getfd */ + if (FD_ISSET(SslFd_get_fd(table[i].getFd), &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(table[%d].getfd)", name, i); + delete_user(table, i, &allset); + continue; + } + + /* postfd */ + if (FD_ISSET(SslFd_get_fd(table[i].postFd), &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(table[%d].postfd)", name, i); + n = http_read(https, table[i].postFd, (unsigned char*) tab, 9000); + if (n != 0) { + table[i].received += n; + if (read_message(table[i].sockfd, n, &table[i], tab, 0)) { + delete_user(table, i, &allset); + } + } + if ((n == 0) || (table[i].received == 90000)) { + table[i].received = 0; + clear_sslFd(table[i].postFd, &allset); + table[i].state |= C_POST_WAIT; + + if (!(table[i].state & C_GET_WAIT)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: send A to table[%d].getfd", name, i); + if (table[i].sent_ptr+1 >= 90000) { + http_write(https, table[i].getFd, (unsigned char*) "A", 1); + table[i].sent_ptr = 0; + clear_sslFd(table[i].getFd, &allset); + FD_CLR(table[i].sockfd, &allset); + table[i].state |= C_GET_WAIT; + } + else { + http_write(https, table[i].getFd, (unsigned char*) "A", 1); + table[i].sent_ptr += 1; + } + } + else { + table[i].state |= C_DELAYED_A; + } + + if (table[i].tmpstate == 1) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: get old POST request...", name); + table[i].state &= ~C_POST_WAIT; + SslFd_swap_content(table[i].postFd, table[i].tmpFd); + set_fd(SslFd_get_fd(table[i].postFd), &maxfdp1, &allset); + table[i].tmpstate = 0; + if (table[i].tmpheader.length) { + table[i].received += table[i].tmpheader.length; + if (read_message(table[i].sockfd, table[i].tmpheader.length, &table[i], + table[i].tmpbuf, table[i].tmpheader.ptr)) { + delete_user(table, i, &allset); + } + } + } + continue; + } + } + } + + /* direct tunnels */ + for (i = 0; i < maxclients; ++i) { + if ((table[i].state == C_OPEN) && (table[i].type == 1)) { + + if (FD_ISSET(table[i].sockfd, &rset)) { + n = read(table[i].sockfd, table[i].buf, 9000); + if (n > 0) { + writen(SslFd_get_fd(table[i].postFd), (unsigned char*) table[i].buf, n); + } + else { + delete_user(table, i, &allset); + continue; + } + } + + if (FD_ISSET(SslFd_get_fd(table[i].postFd), &rset)) { + n = read(SslFd_get_fd(table[i].postFd), tab, 9000); + if (n > 0) { + writen(table[i].sockfd, (unsigned char*) tab, n); + } + else { + delete_user(table, i, &allset); + continue; + } + } + + } + } + + /* listen */ + if (FD_ISSET(listenfd, &rset)) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: FD_ISSET(listenfd)", name); + tmp = accept(listenfd, cliaddr, addrlenp); + if (tmp != -1) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: New connection...", name); + SslFd_set_fd(connFd, tmp); + if (https) { + make_ssl_initialize(connFd); + if (make_ssl_accept(connFd)) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "https proxy: DENIED by SSL_accept"); + close(SslFd_get_fd(connFd)); + SSL_clear(SslFd_get_ssl(connFd)); + continue; + } + } + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: New connection --> EAGAIN", name); + continue; + } + memset(tab, 0, 9000); + nothttp = 0; + if (parse_header(connFd, tab, &hdr, https)) { + nothttp = 1; + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: no http header...", name); + } + n = -1; + for (i = 0; i < maxclients; ++i) { + if (table[i].state == C_CLOSED) { + if (n == -1) + n = i; + } + else { + if ((!nothttp) && (strcmp(table[i].id, hdr.id) == 0)) { + break; + } + } + } + if (i < maxclients) { /* the client exists */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: the client exist...", name); + if (hdr.type == H_TYPE_GET) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: type GET...", name); + if (!(table[i].state & C_GET_WAIT)) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: not waiting for GET...", name); + table[i].sent_ptr = 0; + FD_CLR(table[i].sockfd, &allset); + clear_sslFd(table[i].getFd, &allset); + table[i].state |= C_GET_WAIT; + } + if (!(table[i].state & C_OPEN)) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: not opened...", name); + if (afserver_connect(&table[i].sockfd, afserverfd, cliaddr, addrlenp, 1)) { + memset(tab, 0, 9000); + sprintf(tab,"HTTP/1.1 400 Bad Request\r\n\r\n"); + n = strlen (tab); + http_write(https, connFd, (unsigned char*) tab, n); + close_fd((&(connFd->fd))); + SSL_clear(SslFd_get_ssl(connFd)); + clear_sslFd(table[i].postFd, &allset); + table[i].state = C_CLOSED; + continue; + } + table[i].state |= C_OPEN; + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: OPEN...", name); + } + table[i].state &= ~C_GET_WAIT; + table[i].sent_ptr = 0; + SslFd_swap_content(table[i].getFd, connFd); + set_fd(table[i].sockfd, &maxfdp1, &allset); + set_fd(SslFd_get_fd(table[i].getFd), &maxfdp1, &allset); + memset(tab, 0, 9000); + sprintf(tab, + "HTTP/1.1 200 OK\r\n" + "Content-Length: 90000\r\n" + "Connection: close\r\n" + "Pragma: no-cache\r\n" + "Cache-Control: no-cache, no-store, must-revalidate\r\n" + "Expires: 0\r\n" + "Content-Type: text/html\r\n\r\n"); + n = strlen(tab); + if (writen(SslFd_get_fd(table[i].getFd), (unsigned char*) tab, n) <= 0) { + delete_user(table, i, &allset); + continue; + } + if (table[i].length) { + if (writen(SslFd_get_fd(table[i].getFd), + (unsigned char*) (table[i].buf+table[i].ptr), table[i].length) <= 0) { + delete_user(table, i, &allset); + continue; + } + } + table[i].sent_ptr = table[i].length; + table[i].ptr = 0; + table[i].length = 0; + if (table[i].state & C_DELAYED_A) { + aflog(LOG_T_MAIN, LOG_I_DDEBUG, + "http%s proxy: send A to table[%d].getfd", name, i); + http_write(https, table[i].getFd, (unsigned char*) "A", 1); + table[i].sent_ptr += 1; + table[i].state &= ~C_DELAYED_A; + } + } + else if (hdr.type == H_TYPE_POST) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: type POST...", name); + if (!(table[i].state & C_POST_WAIT)) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: unexpected POST request...", name); + if (table[i].tmpstate == 0) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: buffering POST request...", name); + table[i].tmpstate = 1; + SslFd_swap_content(table[i].tmpFd, connFd); + memcpy(table[i].tmpbuf, tab, 9000); + table[i].tmpheader = hdr; + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: no space to buffer POST request (received from first postfd: %d)", name, + table[i].received); + delete_user(table, i, &allset); + } + } + else { + if (hdr.length) { + table[i].received += hdr.length; + if (read_message(table[i].sockfd, hdr.length, &table[i], tab, hdr.ptr)) { + delete_user(table, i, &allset); + } + } + table[i].state &= ~C_POST_WAIT; + SslFd_swap_content(table[i].postFd, connFd); + set_fd(SslFd_get_fd(table[i].postFd), &maxfdp1, &allset); + } + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: unrecognized type...", name); + delete_user(table, i, &allset); + } + } + else if (n != -1) { /* there are free slots */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: there are free slots...", name); + if (!nothttp) { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: http header...", name); + if (hdr.type == H_TYPE_POST) { /* POST request must be first */ + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: type POST...", name); + table[n].state = C_GET_WAIT; + memcpy(table[n].id,hdr.id, 9); + SslFd_swap_content(table[n].postFd, connFd); + set_fd(SslFd_get_fd(table[n].postFd), &maxfdp1, &allset); + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: closing this connection... (not POST type)", name); + close_fd((&(connFd->fd))); + if (https) { + SSL_clear(SslFd_get_ssl(connFd)); + } + continue; + } + } + else { + table[n].state = C_OPEN; + SslFd_set_fd(table[n].postFd, SslFd_get_fd(connFd)); + table[n].type = 1; + set_fd(SslFd_get_fd(table[n].postFd), &maxfdp1, &allset); + if (afserver_connect(&table[n].sockfd, afserverfd, cliaddr, addrlenp, 0)) { + clear_sslFd(table[n].postFd, &allset); + table[n].state = C_CLOSED; + continue; + } + set_fd(table[n].sockfd, &maxfdp1, &allset); + write(table[n].sockfd, tab, hdr.allreaded); + } + } + else { + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "http%s proxy: closing this connection... (no free slots)", name); + close_fd((&(connFd->fd))); + continue; + } + } + } + + return 0; +} + +/* + * Function name: initialize_http_proxy_server + * Description: Initializes the thread responsible for http proxy connection. + * Arguments: sockfd - the new connection descriptor will be stored here + * host - the name of the host on which we will be listening on + * serv - the port on which we will be listening on + * addrlenp - pointer to the length of the sockaddr structure + * type - the type of the connection + * limit - the limit for user's connections + * https - if the connection should be https instead of http + * ctx - the pointer to SSL_CTX structure + * Returns: 0 - success, + * !0 - failure. + */ + +int +initialize_http_proxy_server(int* sockfd, const char *host, const char *serv, socklen_t *addrlenp, const char type, int limit, char https, SSL_CTX* ctx) +{ + int retval; + int sockets[2]; + pthread_t proxy_thread; + static sproxy_argT arg; + + if (socketpair(AF_UNIX, SOCK_STREAM, 0, sockets)) { + return 1; + } + (*sockfd) = sockets[0]; + + start_critical_section(); + + arg.host = (char*) host; + arg.serv = (char*) serv; + arg.addrlenp = addrlenp; + arg.limit = limit; + arg.type = (char) type; + arg.sockfd = sockets[1]; + arg.https = https; + arg.ctx = ctx; + + retval = pthread_create(&proxy_thread, NULL, &http_proxy_server, &arg); + + wait_for_condition(); + + end_critical_section(); + + return retval; +} + +#endif diff --git a/src/http_proxy_server.h b/src/http_proxy_server.h new file mode 100644 index 0000000..22c121c --- /dev/null +++ b/src/http_proxy_server.h @@ -0,0 +1,29 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_HTTP_PROXY_SERVER_H +#define _JS_HTTP_PROXY_SERVER_H + +#include "http_proxy_functions.h" +#include "network.h" + +int initialize_http_proxy_server(int* sockfd, const char *host, const char *serv, socklen_t *addrlenp, const char type, int limit, char https, SSL_CTX* ctx); + +#endif diff --git a/src/inet_ntop.c b/src/inet_ntop.c new file mode 100644 index 0000000..77e3e40 --- /dev/null +++ b/src/inet_ntop.c @@ -0,0 +1,231 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +/* This is from the BIND 4.9.4 release, modified to compile by itself */ + +/* Copyright (c) 1996 by Internet Software Consortium. + * + * Permission to use, copy, modify, and distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND INTERNET SOFTWARE CONSORTIUM DISCLAIMS + * ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL INTERNET SOFTWARE + * CONSORTIUM BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL + * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR + * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS + * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS + * SOFTWARE. + */ + +#include "inet_ntop.h" + +#ifndef HAVE_INET_NTOP + +#ifndef HAVE_THIS_INET_NTOP +#define HAVE_THIS_INET_NTOP + +#if defined(LIBC_SCCS) && !defined(lint) +static char rcsid[] = "$Id: inet_ntop.c,v 8.5 1996/05/22 04:56:30 vixie Exp $"; +#endif /* LIBC_SCCS and not lint */ + +#include <sys/param.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <netinet/in.h> +#include <arpa/inet.h> +#include <string.h> +#include <errno.h> +#include <stdio.h> + +#define IN6ADDRSZ 16 +#define INT16SZ 2 + +/* + * WARNING: Don't even consider trying to compile this on a system where + * sizeof(int) < 4. sizeof(int) > 4 is fine; all the world's not a VAX. + */ + +static const char *inet_ntop4(const u_char *src, char *dst, size_t size); +#ifdef AF_INET6 +static const char *inet_ntop6(const u_char *src, char *dst, size_t size); +#endif + +/* char * + * inet_ntop(af, src, dst, size) + * convert a network format address to presentation format. + * return: + * pointer to presentation format address (`dst'), or NULL (see errno). + * author: + * Paul Vixie, 1996. + */ +const char * +inet_ntop(af, src, dst, size) + int af; + const void *src; + char *dst; + size_t size; +{ + switch (af) { + case AF_INET: + return (inet_ntop4(src, dst, size)); +#ifdef AF_INET6 + case AF_INET6: + return (inet_ntop6(src, dst, size)); +#endif + default: + errno = EAFNOSUPPORT; + return (NULL); + } + /* NOTREACHED */ +} + +/* const char * + * inet_ntop4(src, dst, size) + * format an IPv4 address, more or less like inet_ntoa() + * return: + * `dst' (as a const) + * notes: + * (1) uses no statics + * (2) takes a u_char* not an in_addr as input + * author: + * Paul Vixie, 1996. + */ +static const char * +inet_ntop4(src, dst, size) + const u_char *src; + char *dst; + size_t size; +{ + static const char fmt[] = "%u.%u.%u.%u"; + char tmp[sizeof "255.255.255.255"]; + + sprintf(tmp, fmt, src[0], src[1], src[2], src[3]); + if (strlen(tmp) > size) { + errno = ENOSPC; + return (NULL); + } + strcpy(dst, tmp); + return (dst); +} + +#ifdef AF_INET6 +/* const char * + * inet_ntop6(src, dst, size) + * convert IPv6 binary address into presentation (printable) format + * author: + * Paul Vixie, 1996. + */ +static const char * +inet_ntop6(src, dst, size) + const u_char *src; + char *dst; + size_t size; +{ + /* + * Note that int32_t and int16_t need only be "at least" large enough + * to contain a value of the specified size. On some systems, like + * Crays, there is no such thing as an integer variable with 16 bits. + * Keep this in mind if you think this function should have been coded + * to use pointer overlays. All the world's not a VAX. + */ + char tmp[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"], *tp; + struct { int base, len; } best, cur; + u_int words[IN6ADDRSZ / INT16SZ]; + int i; + + /* + * Preprocess: + * Copy the input (bytewise) array into a wordwise array. + * Find the longest run of 0x00's in src[] for :: shorthanding. + */ + memset(words, 0, sizeof words); + for (i = 0; i < IN6ADDRSZ; i++) + words[i / 2] |= (src[i] << ((1 - (i % 2)) << 3)); + best.base = -1; + cur.base = -1; + for (i = 0; i < (IN6ADDRSZ / INT16SZ); i++) { + if (words[i] == 0) { + if (cur.base == -1) + cur.base = i, cur.len = 1; + else + cur.len++; + } else { + if (cur.base != -1) { + if (best.base == -1 || cur.len > best.len) + best = cur; + cur.base = -1; + } + } + } + if (cur.base != -1) { + if (best.base == -1 || cur.len > best.len) + best = cur; + } + if (best.base != -1 && best.len < 2) + best.base = -1; + + /* + * Format the result. + */ + tp = tmp; + for (i = 0; i < (IN6ADDRSZ / INT16SZ); i++) { + /* Are we inside the best run of 0x00's? */ + if (best.base != -1 && i >= best.base && + i < (best.base + best.len)) { + if (i == best.base) + *tp++ = ':'; + continue; + } + /* Are we following an initial run of 0x00s or any real hex? */ + if (i != 0) + *tp++ = ':'; + /* Is this address an encapsulated IPv4? */ + if (i == 6 && best.base == 0 && + (best.len == 6 || (best.len == 5 && words[5] == 0xffff))) { + if (!inet_ntop4(src+12, tp, sizeof tmp - (tp - tmp))) + return (NULL); + tp += strlen(tp); + break; + } + sprintf(tp, "%x", words[i]); + tp += strlen(tp); + } + /* Was it a trailing run of 0x00's? */ + if (best.base != -1 && (best.base + best.len) == (IN6ADDRSZ / INT16SZ)) + *tp++ = ':'; + *tp++ = '\0'; + + /* + * Check for overflow, copy, and we're done. + */ + if ((tp - tmp) > size) { + errno = ENOSPC; + return (NULL); + } + strcpy(dst, tmp); + return (dst); +} +#endif + +#endif + +#endif diff --git a/src/inet_ntop.h b/src/inet_ntop.h new file mode 100644 index 0000000..e473896 --- /dev/null +++ b/src/inet_ntop.h @@ -0,0 +1,36 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifdef HAVE_CONFIG_H +# include <config.h> +#endif + +#ifndef HAVE_INET_NTOP + +#include <sys/types.h> + +# ifndef _JS_INET_NTOP_H +# define _JS_INET_NTOP_H + +const char* inet_ntop(int af, const void *src, char *dst, size_t size); + +# endif + +#endif diff --git a/src/logging.c b/src/logging.c new file mode 100644 index 0000000..d1836cf --- /dev/null +++ b/src/logging.c @@ -0,0 +1,471 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "logging.h" +#include "network.h" +#include <stdio.h> +#include <time.h> +#include <string.h> +#include <stdarg.h> + +static llnodeT* head = NULL; +static char verlev; +static char format[51] = "%Y-%m-%d %H:%M:%S"; + +/* + * Function name: setdateformat + * Description: Sets the new date format based on the given string. + * Arguments: dateformat - the new date format + */ + +void +setdateformat(char* dateformat) +{ + if (dateformat) { + strncpy(format, dateformat, 50); + } +} + +/* + * Function name: getdateformat + * Description: Returns the date format. + * Returns: The date format. + */ + +char* +getdateformat() +{ + return format; +} + +/* + * Function name: localdate + * Description: Returns the formatted date string. + * Arguments: sec - the date in seconds + * Returns: The formatted date. + */ + +char* +localdate(time_t* sec) +{ + struct tm* tm; + static char localdat[31]; + tm = localtime(sec); + memset(localdat, 0, 31); + strftime(localdat, 30, format, tm); + return localdat; +} + +/* + * Function name: datum + * Description: Returns the formatted date string. + * Returns: The formatted date. + */ + +char* +datum(void) +{ + time_t sec; + struct tm* tm; + static char timedat[31]; + time(&sec); + tm = localtime(&sec); + memset(timedat, 0, 31); + strftime(timedat, 30, format, tm); + return timedat; +} + +/* + * Function name: getloglisthead + * Description: Returns the head of the log targets list. + * Returns: The head of the log targets list. + */ + +llnodeT* +getloglisthead() +{ + return head; +} + +/* + * Function name: checkmsgti + * Description: Adds the given msgtype/importance to the log target. + * Arguments: target - the log target + * tab - the name of the msttype/importance + * Returns: 0 - success, + * 1 - failure. + */ + +int +checkmsgti(llnodeT* target, char* tab) +{ + if (strcmp(tab, "LOG_T_ALL") == 0) { + target->msgtype |= LOG_T_ALL; + } + else if (strcmp(tab, "LOG_T_USER") == 0) { + target->msgtype |= LOG_T_USER; + } + else if (strcmp(tab, "LOG_T_CLIENT") == 0) { + target->msgtype |= LOG_T_CLIENT; + } + else if (strcmp(tab, "LOG_T_INIT") == 0) { + target->msgtype |= LOG_T_INIT; + } + else if (strcmp(tab, "LOG_T_MANAGE") == 0) { + target->msgtype |= LOG_T_MANAGE; + } + else if (strcmp(tab, "LOG_T_MAIN") == 0) { + target->msgtype |= LOG_T_MAIN; + } + else if (strcmp(tab, "LOG_I_ALL") == 0) { + target->importance |= LOG_I_ALL; + } + else if (strcmp(tab, "LOG_I_CRIT") == 0) { + target->importance |= LOG_I_CRIT; + } + else if (strcmp(tab, "LOG_I_DEBUG") == 0) { + target->importance |= LOG_I_DEBUG; + } + else if (strcmp(tab, "LOG_I_INFO") == 0) { + target->importance |= LOG_I_INFO; + } + else if (strcmp(tab, "LOG_I_NOTICE") == 0) { + target->importance |= LOG_I_NOTICE; + } + else if (strcmp(tab, "LOG_I_WARNING") == 0) { + target->importance |= LOG_I_WARNING; + } + else if (strcmp(tab, "LOG_I_ERR") == 0) { + target->importance |= LOG_I_ERR; + } + else { + return 1; /* unknown msgtype/importance */ + } + return 0; +} + +/* + * Function name: checklogtarget + * Description: Parses the command line and sets all the options. + * Arguments: target - the log target + * Returns 0 - success, + * !0 - failure. + */ + +int +checklogtarget(llnodeT* target) +{ + char* ptr; + char desc[100]; + char type = 0; + char tab[100]; + int tmpfd; + int state, i; + if ((target == NULL) || (target->cmdline == NULL)) { + return 1; /* some of the important data is NULL */ + } + state = 0; /* we are at the beginning of the cmdline */ + memset(tab, 0, 100); + i = 0; + ptr = target->cmdline; + while ((*ptr) != 0) { + switch (state) { + /* beginning of the cmdline */ + case 0: { + if ((*ptr) == ',') { + tab[i] = 0; + if (strcmp(tab, "file") == 0) { + type = LOG_L_FILE; + } + else if (strcmp(tab, "sock") == 0) { + type = LOG_L_SOCK; + } + else { + return 2; /* unknown type of the target */ + } + state = 1; /* we are at the beginning of the file/sock description */ + memset(tab, 0, 100); + memset(desc, 0, 100); + i = 0; + break; + } + if (i == 98) { + return 2; /* unknown type of the target (name too long) */ + } + tab[i] = (*ptr); + ++i; + break; + } + /* beginning of the file/sock description */ + case 1: { + if ((*ptr) == ',') { + tab[i] = 0; + switch (type) { + case LOG_L_FILE: { + target->logfd = fopen(tab, "a"); + if (target->logfd == NULL) { + return 4; /* logging to a non-opened file? */ + } + state = 3; /* we want to read msgtype and importance */ + break; + } + case LOG_L_SOCK: { + strncpy(desc, tab, 99); + state = 2; /* we want to open a socket (read port first) */ + break; + } + default: { + return 2; /* unknown type of the target */ + } + } + memset(tab, 0, 100); + i = 0; + break; + } + if (i == 98) { + return 3; /* wrong file/sock description (name too long) */ + } + tab[i] = (*ptr); + ++i; + break; + } + /* beginning of the sock port description */ + case 2: { + if ((*ptr) == ',') { + tab[i] = 0; + if (ip_connect(&tmpfd, desc, tab, 1, NULL, NULL)) { + return 5; /* can't connect to host:port */ + } + target->logfd = fdopen(tmpfd, "a"); + if (target->logfd == NULL) { + return 4; /* can't create FILE* to log to */ + } + state = 3; /* we want to read msgtype and importance */ + memset(tab, 0, 100); + i = 0; + break; + } + if (i == 98) { + return 3; /* wrong file/sock description (name too long) */ + } + tab[i] = (*ptr); + ++i; + break; + } + /* beginning of the msgtype and importance section */ + case 3: { + if ((*ptr) == ',') { + tab[i] = 0; + if (checkmsgti(target, tab)) { + return 6; + } + memset(tab, 0, 100); + i = 0; + break; + } + if (i == 98) { + return 6; /* wrong msgtype/importance description (name too long) */ + } + tab[i] = (*ptr); + ++i; + break; + } + } + ++ptr; + } + if (i != 0) { + if (state == 3) { + tab[i] = 0; + if (checkmsgti(target, tab)) { + return 6; + } + } + else { + return 1; + } + } + return 0; +} + +/* + * Function name: addlogtarget + * Description: Adds the new non-initialized log target with the specified command line. + * Arguments: cmdline - the command line + */ + +void +addlogtarget(char* cmdline) +{ + llnodeT* newnode = calloc(1, sizeof(llnodeT)); + newnode->cmdline = cmdline; + newnode->next = head; + head = newnode; +} + +/* + * Function name: loginit + * Description: Initializes the logging system. + * Arguments: verl - level of verbosity + * dateformat - date format + * Returns: 0 - success, + * !0 - failure. + */ + +int +loginit(char verl, char* dateformat) +{ + llnodeT* ptr; + int n; + + verlev = 0; + if (verl) { + switch (verl) { + case 1: { + verlev = LOG_I_NOTICE | LOG_I_CRIT; + break; + } + case 2: { + verlev = LOG_I_INFO | LOG_I_NOTICE | LOG_I_CRIT; + break; + } + case 3: { + verlev = LOG_I_INFO | LOG_I_NOTICE | LOG_I_WARNING | LOG_I_CRIT; + break; + } + case 4: { + verlev = LOG_I_INFO | LOG_I_NOTICE | LOG_I_WARNING | LOG_I_ERR | LOG_I_CRIT; + break; + } + case 5: { + verlev = LOG_I_INFO | LOG_I_NOTICE | LOG_I_WARNING | LOG_I_ERR | LOG_I_CRIT | LOG_I_DEBUG; + break; + } + default: { + verlev = LOG_I_ALL; + break; + } + } + } + + setdateformat(dateformat); + + ptr = head; + while (ptr) { + if ((n = checklogtarget(ptr)) != 0) { + return n; + } + ptr = ptr->next; + } + + return 0; +} + +/* + * Function name: initializelogging + * Description: The opaque function for loginit. If the logging initialization + * failed, it prints the appropriate message and exits. + * Arguments: verl - level of verbosity + * dateformat - date format + */ + +void +initializelogging(char verl, char* dateformat) +{ + int k; + if ((k = loginit(verl, dateformat)) != 0) { + switch (k) { + /* wrong format of the logcmd */ + case 1: { + printf("Wrong format of the logcmd\n"); + break; + } + /* unknown type of the logging target */ + case 2: { + printf("Unknown type of the logging target\n"); + break; + } + /* wrong description of the logging target (name too long) */ + case 3: { + printf("Wrong description of the logging target (name too long)\n"); + break; + } + /* can't open file to log to */ + case 4: { + printf("Can't open file to log to\n"); + break; + } + /* can't connect to target host */ + case 5: { + printf("Can't connect to target host\n"); + break; + } + /* wrong msgtype/importance description */ + case 6: { + printf("Wrong msgtype/importance description\n"); + break; + } + } + exit(1); + } +} + +/* + * Function name: aflog + * Description: Logs the given message. + * Arguments: type - the type of the message + * importance - the importance of the message + * form - the format of the message + * ... - the additional arguments + */ + +void +aflog(char type, char importance, const char* form, ...) +{ + llnodeT* ptr; + va_list ap; + + if (verlev & importance) { + if (format[0] != 0) { + printf("[%s] ", datum()); + } + va_start(ap, form); + vfprintf(stdout, form, ap); + va_end(ap); + printf("\n"); + } + + ptr = head; + while (ptr) { + if ((type & ptr->msgtype) && (importance & ptr->importance)) { + if (format[0] != 0) { + fprintf(ptr->logfd, "[%s] ", datum()); + } + va_start(ap, form); + vfprintf(ptr->logfd, form, ap); + va_end(ap); + fprintf(ptr->logfd, "\n"); + fflush(ptr->logfd); + } + ptr = ptr->next; + } +} + diff --git a/src/logging.h b/src/logging.h new file mode 100644 index 0000000..4db250e --- /dev/null +++ b/src/logging.h @@ -0,0 +1,78 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <stdio.h> +#include <time.h> + +#ifndef _JS_LOGGING_H +#define _JS_LOGGING_H + +/* some constants for logging functions */ + /* type of the message */ + +#define LOG_T_ALL (LOG_T_USER | LOG_T_CLIENT | LOG_T_INIT | LOG_T_MANAGE | LOG_T_MAIN) +#define LOG_T_USER 1 +#define LOG_T_CLIENT 2 +#define LOG_T_INIT 4 +#define LOG_T_MANAGE 8 +#define LOG_T_MAIN 16 + + /* importance of the message */ + +#define LOG_I_ALL (LOG_I_CRIT | LOG_I_DEBUG | LOG_I_DDEBUG | LOG_I_INFO | LOG_I_NOTICE | LOG_I_WARNING | LOG_I_ERR) +#define LOG_I_CRIT 1 +#define LOG_I_DEBUG 2 +#define LOG_I_DDEBUG 4 +#define LOG_I_INFO 8 +#define LOG_I_NOTICE 16 +#define LOG_I_WARNING 32 +#define LOG_I_ERR 64 + + /* type of the logging target */ + +#define LOG_L_FILE 1 +#define LOG_L_SOCK 2 + +/* a structure that keeps information about logging target */ +typedef struct llnode { + char* cmdline; + char msgtype; + char importance; + FILE* logfd; + struct llnode* next; +} llnodeT; + + /* set dateformat */ +void setdateformat(char* dateformat); + /* get dateformat */ +char* getdateformat(); + /* get llnodeT head */ +llnodeT* getloglisthead(); + /* add logging target */ +void addlogtarget(char* cmdline); + /* initialize logging routine */ +void initializelogging(char verlev, char* dateformat); + /* log to a file or|and screen */ +void aflog(char type, char importance, const char* format, ...); + /* get text representation of the date */ +char* localdate(time_t* sec); + +#endif + diff --git a/src/make_ssl_handshake.c b/src/make_ssl_handshake.c new file mode 100644 index 0000000..6ebb859 --- /dev/null +++ b/src/make_ssl_handshake.c @@ -0,0 +1,139 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "make_ssl_handshake.h" +#include "stats.h" +#include "logging.h" + +#include <errno.h> +#include <openssl/err.h> + +/* + * Function name: make_ssl_initialize + * Description: Initializes the file descriptor of the SSL connection. + * Arguments: sf - pointer to SslFd structure + */ + +void +make_ssl_initialize(SslFd* sf) +{ + if (SSL_set_fd(SslFd_get_ssl(sf), SslFd_get_fd(sf)) != 1) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "Problem with initializing ssl... exiting"); + exit(1); + } +} + +/* + * Function name: make_ssl_accept + * Description: Accepts new SSL connection. + * Arguments: sf - pointer to SslFd structure + * Returns: 0 - success, + * !0 - failure. + */ + +int +make_ssl_accept(SslFd* sf) +{ + int result; + if ((result = SSL_accept(SslFd_get_ssl(sf))) != 1) { + return get_ssl_error(sf, "SSL_accept has failed", result); + } + return 0; +} + +/* + * Function name: get_ssl_error + * Description: Decodes and logs SSL errors. + * Arguments: sf - pointer to SslFd structure + * info - the header of the warning message + * result - the result from the SSL_accept function + * Returns: 1 - more i/o operations are needed to accomplish handshake, + * 2 - the error was fatal for the handshake. + */ + +int +get_ssl_error(SslFd* sf, char* info, int result) +{ + int merror; +#ifdef HAVE_ERR_ERROR_STRING + char err_buff[200]; +#endif + merror = SSL_get_error(SslFd_get_ssl(sf), result); + switch (merror) { + case SSL_ERROR_NONE : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): none", info, result); + break; + } + case SSL_ERROR_ZERO_RETURN : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): zero", info, result); + break; + } + case SSL_ERROR_WANT_READ : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): w_read", info, result); + break; + } + case SSL_ERROR_WANT_WRITE : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): w_write", info, result); + break; + } + case SSL_ERROR_WANT_CONNECT : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): w_connect", info, result); + break; + } + case SSL_ERROR_WANT_X509_LOOKUP : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): w_x509_lookup", info, result); + break; + } + case SSL_ERROR_SYSCALL : { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): syscall", info, result); + break; + } + case SSL_ERROR_SSL : { + SSL_load_error_strings(); +#ifdef HAVE_ERR_ERROR_STRING + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): ssl:%s", info, result, + ERR_error_string(ERR_get_error(), err_buff)); +#else + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): ssl", info, result); +#endif + break; + } + default: { + aflog(LOG_T_MAIN, LOG_I_WARNING, + "%s(%d): unrecognized error (%d)", info, result, errno); + } + } + if ((merror == SSL_ERROR_WANT_READ) || (merror == SSL_ERROR_WANT_WRITE)) { + return 1; + } + return 2; +} diff --git a/src/make_ssl_handshake.h b/src/make_ssl_handshake.h new file mode 100644 index 0000000..b326968 --- /dev/null +++ b/src/make_ssl_handshake.h @@ -0,0 +1,32 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "network.h" +#include "ssl_fd_struct.h" + +#ifndef _JS_MAKE_SSL_HANDSHAKE_H +#define _JS_MAKE_SSL_HANDSHAKE_H + +void make_ssl_initialize(SslFd* sf); +int make_ssl_accept(SslFd* sf); +int get_ssl_error(SslFd* sf, char* info, int result); + +#endif + diff --git a/src/module_struct.c b/src/module_struct.c new file mode 100644 index 0000000..ab1d2f8 --- /dev/null +++ b/src/module_struct.c @@ -0,0 +1,224 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#ifdef HAVE_LIBDL + +#include "string_functions.h" +#include "module_struct.h" + +#include <stdlib.h> +#include <dlfcn.h> +#include <assert.h> + +/* + * Function name: Module_new + * Description: Create and initialize new Module structure. + * Returns: Pointer to newly created Module structure. + */ + +Module* +Module_new() +{ + Module* tmp = calloc(1, sizeof(Module)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: Module_free + * Description: Free the memory allocated for Module structure. + * Arguments: m - pointer to pointer to Module structure + */ + +void +Module_free(Module** m) +{ + assert(m != NULL); + if (m == NULL) { + return; + } + assert((*m) != NULL); + if ((*m) == NULL) { + return; + } + Module_releaseModule(*m); + if ((*m)->fileName) { + free((*m)->fileName); + (*m)->fileName = NULL; + } + free((*m)); + (*m) = NULL; +} + +/* + * Function name: Module_set_fileName + * Description: Set the filename of the module. + * Arguments: m - pointer to Module structure + * fileName - the filename of the module + */ + +void +Module_set_fileName(Module* m, char* fileName) +{ + assert(m != NULL); + if (m == NULL) { + return; + } + string_cp(&(m->fileName), fileName); +} + +/* + * Function name: Module_get_fileName + * Description: Get the filename of the module. + * Arguments: m - pointer to Module structure + * Returns: The filename of the module. + */ + +char* +Module_get_fileName(Module* m) +{ + assert(m != NULL); + if (m == NULL) { + return NULL; + } + return m->fileName; +} + +/* + * Function name: Module_loadModule + * Description: Load the module into the memory. + * Arguments: m - pointer to Module structure + * Returns: 0 - successful/filename not set + * 1/2 - some errors occured. + */ + +int +Module_loadModule(Module* m) +{ + if (Module_get_fileName(m)) { + m->handle = dlopen(Module_get_fileName(m), RTLD_NOW); + if (!m->handle) { + return 1; + } + dlerror(); + *(void**) (&m->info) = dlsym(m->handle, "info"); + *(void**) (&m->allow) = dlsym(m->handle, "allow"); + *(void**) (&m->filter) = dlsym(m->handle, "filter"); + if (dlerror() != NULL) { + return 2; + } + m->loaded = 1; + } + return 0; +} + +/* + * Function name: Module_releaseModule + * Description: Unload the module from the memory. + * Arguments: m - pointer to Module structure + * Returns: 0 - successful/module was not loaded + * !0 - some errors occured. + */ + +int +Module_releaseModule(Module* m) +{ + if (Module_isModuleLoaded(m)) { + m->loaded = 0; + m->info = NULL; + m->allow = NULL; + m->filter = NULL; + return dlclose(m->handle); + } + return 0; +} + +/* + * Function name: Module_isModuleLoaded + * Description: Check if the module is loaded into the memory. + * Arguments: m - pointer to Module structure + * Returns: 0 - module is not loaded + * 1 - module is loaded. + */ + +int +Module_isModuleLoaded(Module* m) +{ + assert(m != NULL); + if (m == NULL) { + return 0; + } + return m->loaded; +} + +/* + * Function name: Module_function_info + * Description: Exec the info function of the module. + * Arguments: m - pointer to Module structure + * Returns: Result of the info function of the module. + */ + +char* +Module_function_info(Module* m) +{ + if (!Module_isModuleLoaded(m)) { + return NULL; + } + return m->info(); +} + +/* + * Function name: Module_function_allow + * Description: Exec the allow function of the module. + * Arguments: m - pointer to Module structure + * Returns: Result of the allow function of the module. + */ + +int +Module_function_allow(Module* m, char* host, char* port) +{ + if (!Module_isModuleLoaded(m)) { + return 0; + } + return m->allow(host, port); +} + +/* + * Function name: Module_function_filter + * Description: Exec the filter function of the module. + * Arguments: m - pointer to Module structure + * Returns: Result of the filter function of the module. + */ + +int +Module_function_filter(Module* m, char* host, unsigned char* message, int* messageLength) +{ + if (!Module_isModuleLoaded(m)) { + return 0; + } + return m->filter(host, message, messageLength); +} + +#endif diff --git a/src/module_struct.h b/src/module_struct.h new file mode 100644 index 0000000..cd8ef10 --- /dev/null +++ b/src/module_struct.h @@ -0,0 +1,55 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#ifdef HAVE_LIBDL + +# ifndef _JS_MODULE_STRUCT_H +# define _JS_MODULE_STRUCT_H + +typedef struct { + char loaded; + char* fileName; + void* handle; + char* (*info)(void); + int (*allow)(char*, char*); + int (*filter)(char*, unsigned char*, int*); +} Module; + +/* 'constructor' */ +Module* Module_new(); +/* 'destructor' */ +void Module_free(Module** m); +/* setters */ +void Module_set_fileName(Module* m, char* fileName); +/* getters */ +char* Module_get_fileName(Module* m); +/* other */ +int Module_loadModule(Module* m); +int Module_releaseModule(Module* m); +int Module_isModuleLoaded(Module* m); +char* Module_function_info(Module* m); +int Module_function_allow(Module* m, char* host, char* port); +int Module_function_filter(Module* m, char* host, unsigned char* message, int* messageLength); + +# endif + +#endif diff --git a/src/network.c b/src/network.c new file mode 100644 index 0000000..4d2e051 --- /dev/null +++ b/src/network.c @@ -0,0 +1,561 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "inet_ntop.h" +#include "network.h" +#include "activefor.h" +#include "stats.h" +#include "logging.h" +#include <string.h> +#include <errno.h> +#include <zlib.h> +#include <assert.h> + +/* + * Function name: ip_listen + * Description: Creates the listening socket. + * Arguments: sockfd - the created socket + * host - the name of the host + * serv - the name of the service (port) + * addrlenp - pointer to the length of the sockaddr structure + * type - the type of the socket + * Returns: 0 - success, + * !0 - failure. + */ + +int +ip_listen(int* sockfd, const char *host, const char *serv, socklen_t *addrlenp, const char type) +{ + const int on = 1; +#if defined(HAVE_GETADDRINFO) && defined(AF_INET6) + int n; + struct addrinfo hints, *res, *ressave; + + aflog(LOG_T_INIT, LOG_I_DDEBUG, + "ip_listen: host=[%s] serv=[%s], type=[%d]", host, serv, type); + + bzero(&hints, sizeof(struct addrinfo)); + hints.ai_flags = AI_PASSIVE; + if (type & 0x02) { + hints.ai_family = AF_INET; + } + else if (type & 0x04) { + hints.ai_family = AF_INET6; + } + else { + hints.ai_family = AF_UNSPEC; + } + + if (type & 0x01) { + hints.ai_socktype = SOCK_STREAM; + } + else { + hints.ai_socktype = SOCK_DGRAM; + } + + if ( (n = getaddrinfo(host, serv, &hints, &res)) != 0) { + return n; + } + ressave = res; + + do { + (*sockfd) = socket(res->ai_family, res->ai_socktype, res->ai_protocol); + if ((*sockfd) < 0) { + continue; /* error, try next one */ + } + + if (type & 0x01) { /* tcp_listen */ + setsockopt((*sockfd), SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)); + setsockopt((*sockfd), SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)); + } + + if (bind((*sockfd), res->ai_addr, res->ai_addrlen) == 0) { + break; /* success */ + } + + close((*sockfd)); /* bind error, close and try next one */ + } while ( (res = res->ai_next) != NULL); + + if (res == NULL) { /* errno from final socket() or bind() */ + return 1; + } + + if (type & 0x01) { /* tcp_listen */ + listen((*sockfd), 1); + } + + if (addrlenp) { + *addrlenp = res->ai_addrlen; /* return size of protocol address */ + } + + freeaddrinfo(ressave); +#else + struct sockaddr_in servaddr; + struct hostent* hostaddr = NULL; + int port; + + aflog(LOG_T_INIT, LOG_I_DDEBUG, + "ip_listen: host=[%s] serv=[%s], type=[%d]", host, serv, type); + + if (type & 0x01) { + (*sockfd) = socket(AF_INET, SOCK_STREAM, 0); + } + else { + (*sockfd) = socket(AF_INET, SOCK_DGRAM, 0); + } + + if ((*sockfd) == -1) { + return 1; + } + port = atoi(serv); + + if (host) { + hostaddr = gethostbyname(host); + if (hostaddr == NULL) { + return 2; + } + } + + memset(&servaddr, 0, sizeof(servaddr)); + servaddr.sin_family = AF_INET; + if (host) { + memcpy(&servaddr.sin_addr.s_addr, hostaddr->h_addr_list[0], hostaddr->h_length); + } + else { + servaddr.sin_addr.s_addr = htonl(INADDR_ANY); + } + servaddr.sin_port = htons(port); + + if (type & 0x01) { /* tcp_listen */ + setsockopt((*sockfd), SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on)); + setsockopt((*sockfd), SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)); + } + + if (bind((*sockfd), (struct sockaddr*) &servaddr, sizeof(servaddr))){ + printf("bind failed\n"); + return 4; + } + + if (type & 0x01) { /* tcp_listen */ + if (listen((*sockfd), 5)){ + return 5; + } + } + + if (addrlenp) { + *addrlenp = sizeof(servaddr); /* return size of protocol address */ + } +#endif + + return(0); +} + +/* + * Function name: ip_connect + * Description: Creates the connected socket. + * Arguments: sockfd - the connected socket + * host - the name of the host + * serv - the name of the service (port) + * type - the type of the socket + * lhost - the name of the local host (used for local bind of the socket) + * lserv - the name of the local service (port) (used for local bind of the socket) + * Returns: 0 - success, + * !0 - failure. + */ + +int +ip_connect(int* sockfd, const char *host, const char *serv, const char type, + const char *lhost, const char *lserv) +{ + const int on = 1; +#if defined(HAVE_GETADDRINFO) && defined(AF_INET6) + int n; + int bindFailed; + struct addrinfo hints, *res, *ressave; + struct addrinfo lhints, *lres, *lressave = NULL; + + aflog(LOG_T_INIT, LOG_I_DDEBUG, + "ip_connect: host=[%s] serv=[%s], type=[%d], lhost=[%s], lserv=[%s]", host, serv, type, lhost, lserv); + + bzero(&hints, sizeof(struct addrinfo)); + if (type & 0x02) { + hints.ai_family = AF_INET; + } + else if (type & 0x04) { + hints.ai_family = AF_INET6; + } + else { + hints.ai_family = AF_UNSPEC; + } + if (type & 0x01) { + hints.ai_socktype = SOCK_STREAM; + } + else { + hints.ai_socktype = SOCK_DGRAM; + } + + lhints = hints; + + if (lhost || lserv) { + if ( (n = getaddrinfo(lhost, lserv, &lhints, &lres)) != 0) { + return n; + } + lressave = lres; + } + + if ( (n = getaddrinfo(host, serv, &hints, &res)) != 0) { + return n; + } + ressave = res; + + do { + (*sockfd) = socket(res->ai_family, res->ai_socktype, res->ai_protocol); + if ((*sockfd) < 0) { + continue; /* ignore this one */ + } + + if (type & 0x01) { /* tcp_connect */ + setsockopt((*sockfd), SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)); + } + + bindFailed = 0; + if (lhost || lserv) { + bindFailed = 1; + lres = lressave; + do { + if (bind((*sockfd), lres->ai_addr, lres->ai_addrlen) == 0) { + bindFailed = 0; + break; /* success */ + } + } while ( (lres = lres->ai_next) != NULL); + } + + if (bindFailed == 1) { + close((*sockfd)); /* ignore this one */ + continue; + } + + if (connect((*sockfd), res->ai_addr, res->ai_addrlen) == 0) { + break; /* success */ + } + + close((*sockfd)); /* ignore this one */ + } while ( (res = res->ai_next) != NULL); + + if (res == NULL) { /* errno set from final connect() */ + return 1; + } + + if (lhost || lserv) { + freeaddrinfo(lressave); + } + freeaddrinfo(ressave); +#else + struct sockaddr_in servaddr, lservaddr; + struct hostent* hostaddr; + struct hostent* lhostaddr; + int port, lport; + + aflog(LOG_T_INIT, LOG_I_DDEBUG, + "ip_connect: host=[%s] serv=[%s], type=[%d], lhost=[%s], lserv=[%s]", host, serv, type, lhost, lserv); + + if (type & 0x01) { + (*sockfd) = socket(AF_INET, SOCK_STREAM, 0); + } + else { + (*sockfd) = socket(AF_INET, SOCK_DGRAM, 0); + } + + if ((*sockfd) == -1) { + return 1; + } + port = atoi(serv); + + hostaddr = gethostbyname(host); + if (hostaddr == NULL) { + return 2; + } + + memset(&servaddr, 0, sizeof(servaddr)); + servaddr.sin_family = AF_INET; + servaddr.sin_port = htons(port); + memcpy(&servaddr.sin_addr.s_addr, hostaddr->h_addr_list[0], hostaddr->h_length); + + if (type & 0x01) { /* tcp_connect */ + setsockopt((*sockfd), SOL_SOCKET, SO_KEEPALIVE, &on, sizeof(on)); + } + + if (lhost || lserv) { + memset(&lservaddr, 0, sizeof(lservaddr)); + lservaddr.sin_family = AF_INET; + if (lserv) { + lport = atoi(lserv); + lservaddr.sin_port = htons(lport); + } + if (lhost) { + lhostaddr = gethostbyname(lhost); + if (lhostaddr == NULL) { + return 3; + } + memcpy(&lservaddr.sin_addr.s_addr, lhostaddr->h_addr_list[0], lhostaddr->h_length); + } + else { + lservaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); + } + if (bind((*sockfd), (struct sockaddr*) &lservaddr, sizeof(lservaddr))){ + return 4; + } + } + + if (connect((*sockfd), (struct sockaddr*) &servaddr, sizeof(servaddr))){ + return 5; + } +#endif + + return(0); +} + +/* + * Function name: sock_ntop + * Description: Returns the string representing given socket address. + * Arguments: sa - pointer to sockaddr structure + * salen - size of the sockaddr structure + * namebuf - buffer for string representation of the host name + * portbuf - buffer for string representation of the host port + * type - if the socket address should be resolved to the the DNS name + * Returns: The string representing given socket address or NULL, if the address + * can't be established. + */ + +char * +sock_ntop(const struct sockaddr *sa, socklen_t salen, char* namebuf, char* portbuf, char type) +{ + char portstr[7]; + static char str[136]; /* Unix domain is largest */ + + switch (sa->sa_family) { + case AF_INET: { + struct sockaddr_in *sin = (struct sockaddr_in *) sa; + + if (type) { +#ifdef HAVE_GETNAMEINFO + if (getnameinfo(sa, salen, str, 128, NULL, 0, 0)) { + return NULL; + } +#else + struct hostent* hostname; + if ((hostname = gethostbyaddr((void*) &sin->sin_addr, sizeof(struct in_addr), AF_INET))) { + strncpy(str, hostname->h_name, 127); + str[127] = 0; + } + else { + if (inet_ntop(AF_INET, (void*) &sin->sin_addr, str, sizeof(str)) == NULL) { + return NULL; + } + } +#endif + + } + else { + if (inet_ntop(AF_INET, (void*) &sin->sin_addr, str, sizeof(str)) == NULL) { + return NULL; + } + } + if (namebuf) { + memcpy(namebuf, str, 128); + } + if (ntohs(sin->sin_port) != 0) { + snprintf(portstr, sizeof(portstr), ".%d", ntohs(sin->sin_port)); + if (portbuf) { + snprintf(portbuf, 7, "%d", ntohs(sin->sin_port)); + } + strcat(str, portstr); + } + return(str); + } +#ifdef AF_INET6 + case AF_INET6: { + struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *) sa; + + if (type) { +#ifdef HAVE_GETNAMEINFO + if (getnameinfo(sa, salen, str, 128, NULL, 0, 0)) { + return NULL; + } +#else + struct hostent* hostname; + if ((hostname = gethostbyaddr(&sin6->sin6_addr, sizeof(struct in6_addr), AF_INET6))) { + strncpy(str, hostname->h_name, 127); + str[127] = 0; + } + else { + if (inet_ntop(AF_INET6, &sin6->sin6_addr, str, sizeof(str)) == NULL) { + return NULL; + } + } +#endif + + } + else { + if (inet_ntop(AF_INET6, &sin6->sin6_addr, str, sizeof(str)) == NULL) { + return NULL; + } + } + if (namebuf) { + memcpy(namebuf, str, 128); + } + if (ntohs(sin6->sin6_port) != 0) { + snprintf(portstr, sizeof(portstr), ".%d", ntohs(sin6->sin6_port)); + if (portbuf) { + snprintf(portbuf, 7, "%d", ntohs(sin6->sin6_port)); + } + strcat(str, portstr); + } + return(str); + } +#endif + default: { + snprintf(str, sizeof(str), "sock_ntop: unknown AF_xxx: %d, len %d", sa->sa_family, salen); + return(str); + } + } + return NULL; +} + +/* + * Function name: SSL_writen + * Description: Writes the given amount of data to the SSL connection. + * Arguments: fd - the SSL connection + * buf - buffer with data to write + * amount - the size of the data + * Returns: The amount of bytes written to the SSL connection. + */ + +int +SSL_writen(SSL* fd, unsigned char* buf, int amount) +{ + int sent, n; + sent = 0; + assert(amount > 0); + while (sent < amount) { + n = SSL_write(fd, buf+sent, amount - sent); + assert(n != 0); + if (n != -1) { + sent += n; + } + if (n == -1) { + if (errno != EAGAIN) + return 0; + } + } + return amount; +} + +/* + * Function name: SSL_readn + * Description: Reads the given amount of data from the SSL connection. + * Arguments: fd - the SSL connection + * buf - buffer for data + * amount - the size of the data to read + * Returns: The amount of bytes read from the SSL connection. + */ + +int +SSL_readn(SSL* fd, unsigned char* buf, int amount) +{ + int sent, n; + sent = 0; + assert(amount > 0); + while (sent < amount) { + n = SSL_read(fd, buf+sent, amount - sent); + if (n != -1) { + sent += n; + } + if (n == 0) + return 0; + if (n == -1) { + if (errno != EAGAIN) + return 0; + } + } + return amount; +} + +/* + * Function name: writen + * Description: Writes the given amount of data to the file descriptor. + * Arguments: fd - the file descriptor + * buf - buffer with data to write + * amount - the size of the data + * Returns: The amount of bytes written to the file descriptor + */ + +int +writen(int fd, unsigned char* buf, int amount) +{ + int sent, n; + sent = 0; + assert(amount > 0); + while (sent < amount) { + n = write(fd, buf+sent, amount - sent); + assert(n != 0); + if (n != -1) { + sent += n; + } + if (n == -1) { + if (errno != EAGAIN) + return 0; + } + } + return amount; +} + +/* + * Function name: readn + * Description: Reads the given amount of data from the file descriptor. + * Arguments: fd - the file descriptor + * buf - buffer for data + * amount - the size of the data to read + * Returns: The amount of bytes read from the file descriptor. + */ + +int +readn(int fd, unsigned char* buf, int amount) +{ + int sent, n; + sent = 0; + assert(amount > 0); + while (sent < amount) { + n = read(fd, buf+sent, amount - sent); + if (n != -1) { + sent += n; + } + if (n == 0) + return 0; + if (n == -1) { + if (errno != EAGAIN) + return 0; + } + } + return amount; + +} diff --git a/src/network.h b/src/network.h new file mode 100644 index 0000000..b8c0273 --- /dev/null +++ b/src/network.h @@ -0,0 +1,49 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_NETWORK_H +#define _JS_NETWORK_H + +#include <stdio.h> +#include <stdlib.h> +#include <strings.h> +#include <sys/types.h> +#include <sys/socket.h> +#include <sys/select.h> +#include <arpa/inet.h> +#include <netinet/in.h> +#include <unistd.h> +#ifdef HAVE_LIBPTHREAD +#include <pthread.h> +#endif +#include <netdb.h> +#include <openssl/ssl.h> + +int ip_listen(int* sockfd, const char *host, const char *serv, socklen_t *addrlenp, const char type); /* socket, bind, listen... */ +int ip_connect(int* sockfd, const char *host, const char *serv, const char type, + const char *lhost, const char *lserv); /* socket[, bind], connect... */ +char* sock_ntop(const struct sockaddr* sa, socklen_t salen, char* namebuf, char* portbuf, char type); /* return the IP of connected user */ + +int SSL_writen(SSL* fd, unsigned char* buf, int amount); +int SSL_readn(SSL* fd, unsigned char* buf, int amount); +int writen(int fd, unsigned char* buf, int amount); +int readn(int fd, unsigned char* buf, int amount); + +#endif diff --git a/src/port_list_node_struct.c b/src/port_list_node_struct.c new file mode 100644 index 0000000..cc171a4 --- /dev/null +++ b/src/port_list_node_struct.c @@ -0,0 +1,140 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "port_list_node_struct.h" +#include "string_functions.h" + +/* + * Function name: PortListNode_new + * Description: Creates and initializes new PortListNode structure from the + * given port name. + * Arguments: portName - the port name + * Returns: Newly created PortListNode structure. + */ + +PortListNode* +PortListNode_new(char* portName) +{ + PortListNode* tmp = calloc(1, sizeof(PortListNode)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + PortListNode_set_portName(tmp, portName); + return tmp; +} + +/* + * Function name: PortListNode_free + * Description: Frees the memory allocated for PortListNode structure. + * Arguments: pln - pointer to pointer to PortListNode structure + */ + +void +PortListNode_free(PortListNode** pln) +{ + assert(pln != NULL); + if (pln == NULL) { + return; + } + assert((*pln) != NULL); + if ((*pln) == NULL) { + return; + } + if ((*pln)->portName) { + free((*pln)->portName); + (*pln)->portName = NULL; + } + free((*pln)); + (*pln) = NULL; +} + +/* + * Function name: PortListNode_set_portName + * Description: Sets the port name. + * Arguments: pln - pointer to PortListNode structure + * portName - the port name + */ + +void +PortListNode_set_portName(PortListNode* pln, char* portName) +{ + assert(pln != NULL); + if (pln == NULL) { + return; + } + string_cp(&(pln->portName), portName); +} + +/* + * Function name: PortListNode_set_nextNode + * Description: Sets next node pointer. + * Arguments: pln - pointer to PortListNode structure + * nextNode - next node pointer + */ + +void +PortListNode_set_nextNode(PortListNode* pln, PortListNode* nextNode) +{ + assert(pln != NULL); + if (pln == NULL) { + return; + } + pln->nextNode = nextNode; +} + +/* + * Function name: PortListNode_get_portName + * Description: Gets the port name. + * Arguments: pln - pointer to PortListNode structure + * Returns: The port name. + */ + +char* +PortListNode_get_portName(PortListNode* pln) +{ + assert(pln != NULL); + if (pln == NULL) { + return NULL; + } + return pln->portName; +} + +/* + * Function name: PortListNode_get_nextNode + * Description: Gets next node pointer. + * Arguments: pln - pointer to PortListNode structure + * Returns: Next PortListNode structure pointer or NULL, if there is no next one. + */ + +PortListNode* +PortListNode_get_nextNode(PortListNode* pln) +{ + assert(pln != NULL); + if (pln == NULL) { + return NULL; + } + return pln->nextNode; +} diff --git a/src/port_list_node_struct.h b/src/port_list_node_struct.h new file mode 100644 index 0000000..f4b1de6 --- /dev/null +++ b/src/port_list_node_struct.h @@ -0,0 +1,40 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_PORT_LIST_NODE_STRUCT_H +#define _JS_PORT_LIST_NODE_STRUCT_H + +typedef struct plnode { + char* portName; + struct plnode* nextNode; +} PortListNode; + +/* 'constructor' */ +PortListNode* PortListNode_new(char* portName); +/* 'destructor' */ +void PortListNode_free(PortListNode** pln); +/* setters */ +void PortListNode_set_portName(PortListNode* pln, char* portName); +void PortListNode_set_nextNode(PortListNode* pln, PortListNode* nextNode); +/* getters */ +char* PortListNode_get_portName(PortListNode* pln); +PortListNode* PortListNode_get_nextNode(PortListNode* pln); + +#endif diff --git a/src/port_list_struct.c b/src/port_list_struct.c new file mode 100644 index 0000000..f464044 --- /dev/null +++ b/src/port_list_struct.c @@ -0,0 +1,167 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "port_list_struct.h" + +/* + * Function name: PortList_new + * Description: Creates and initialies new PortList structure. + * Returns: Newly created PortList structure. + */ + +PortList* +PortList_new() +{ + PortList* tmp = calloc(1, sizeof(PortList)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: PortList_free + * Description: Frees the memory allocated for PortList structure. + * Arguments: pl - pointer to pointer to PortList structure + */ + +void +PortList_free(PortList** pl) +{ + assert(pl != NULL); + if (pl == NULL) { + return; + } + assert((*pl) != NULL); + if ((*pl) == NULL) { + return; + } + PortList_clear((*pl)); + free((*pl)); + (*pl) = NULL; +} + +/* + * Function name: PortList_insert_back + * Description: Inserts new node at the end of the list. + * Arguments: pl - pointer to PortList structure + * pln - pointer to PortListNode structure + */ + +void +PortList_insert_back(PortList* pl, PortListNode* pln) +{ + assert(pl != NULL); + if (pl == NULL) { + return; + } + assert(pln != NULL); + if (pln == NULL) { + return; + } + if (pl->tail) { + pl->tail->nextNode = pln; + } + else { + pl->head = pln; + } + pl->tail = pln; + pln->nextNode = NULL; + pl->size += 1; +} + +/* + * Function name: PortList_get_nth + * Description: Get the nth node from the beginning of the list. + * Arguments: pl - pointer to PortList structure + * n - the number of the node + * Returns: Nth node from the beginning of the list. + */ + +PortListNode* +PortList_get_nth(PortList* pl, int n) +{ + PortListNode* tmp; + assert(pl != NULL); + if (pl == NULL) { + return NULL; + } + assert(n >= 0); + assert(n < PortList_get_size(pl)); + tmp = pl->head; + while (tmp) { + if (n <= 0) { + return tmp; + } + n -= 1; + tmp = PortListNode_get_nextNode(tmp); + } + return NULL; +} + +/* + * Function name: PortList_get_size + * Description: Returns the size of the list. + * Arguments: pl - pointer to PortList structure + * Returns: The size of the list. + */ + +int +PortList_get_size(PortList* pl) +{ + assert(pl != NULL); + if (pl == NULL) { + return -1; + } + return pl->size; +} + +/* + * Function name: PortList_clear + * Description: Deletes all nodes from the list. + * Arguments: pl - pointer to PortList structure + */ + +void +PortList_clear(PortList* pl) +{ + PortListNode* tmp; + assert(pl != NULL); + if (pl == NULL) { + return; + } + while (pl->head) { + tmp = pl->head; + if (tmp == pl->tail) { + pl->head = pl->tail = NULL; + } + else { + pl->head = PortListNode_get_nextNode(pl->head); + } + PortListNode_free(&tmp); + } + pl->size = 0; +} diff --git a/src/port_list_struct.h b/src/port_list_struct.h new file mode 100644 index 0000000..175f06b --- /dev/null +++ b/src/port_list_struct.h @@ -0,0 +1,42 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_PORT_LIST_STRUCT_H +#define _JS_PORT_LIST_STRUCT_H + +#include "port_list_node_struct.h" + +typedef struct portlist { + int size; + PortListNode* head; + PortListNode* tail; +} PortList; + +/* 'constructor' */ +PortList* PortList_new(); +/* 'destructor' */ +void PortList_free(PortList** pl); +/* other */ +void PortList_insert_back(PortList* pl, PortListNode* pln); +PortListNode* PortList_get_nth(PortList* pl, int n); +int PortList_get_size(PortList* pl); +void PortList_clear(PortList* pl); + +#endif diff --git a/src/realmnames.c b/src/realmnames.c new file mode 100644 index 0000000..db9cfdf --- /dev/null +++ b/src/realmnames.c @@ -0,0 +1,86 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdio.h> +#include <string.h> +#include <assert.h> +#include "realmnames.h" + +/* + * Function name: get_realmname + * Description: Returns the name of the realm. + * Arguments: config - the server configuration + * realm - the realm number + * Returns: The name of the realm. + */ + +char* +get_realmname(ServerConfiguration* config, int realm) +{ + static char realmname[10]; + + assert(config != NULL); + + if (ServerRealm_get_realmName(ServerConfiguration_get_realmsTable(config)[realm]) == NULL) { + memset(realmname, 0, 10); + sprintf(realmname, "%d", realm); + return realmname; + } + + return ServerRealm_get_realmName(ServerConfiguration_get_realmsTable(config)[realm]); +} + +/* + * Function name: get_realmnumber + * Description: Returns the realm number. + * Arguments: config - the server configuration + * realmname - the name of the realm + * Returns: The realm number or -1, if there is no realm with such name. + */ + +int +get_realmnumber(ServerConfiguration* config, char* realmname) +{ + int i; + char guard; + + assert(config != NULL); + assert(realmname != NULL); + + for (i = 0; i < ServerConfiguration_get_realmsNumber(config); ++i) { + if (ServerRealm_get_realmName(ServerConfiguration_get_realmsTable(config)[i]) != NULL) { + if (strcmp(realmname, ServerRealm_get_realmName(ServerConfiguration_get_realmsTable(config)[i])) == 0) { + return i; + } + } + } + + if (sscanf(realmname, "%d%c", &i, &guard) == 1) { + if ((i >= 0) && (i < ServerConfiguration_get_realmsNumber(config))) { + if (ServerRealm_get_realmName(ServerConfiguration_get_realmsTable(config)[i]) == NULL) { + return i; + } + } + } + + return -1; +} diff --git a/src/realmnames.h b/src/realmnames.h new file mode 100644 index 0000000..8974488 --- /dev/null +++ b/src/realmnames.h @@ -0,0 +1,31 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "server_configuration_struct.h" + +#ifndef _JS_REALMNAMES_H +#define _JS_REALMNAMES_H + +char* get_realmname(ServerConfiguration*, int); +int get_realmnumber(ServerConfiguration*, char*); + +#endif + diff --git a/src/remoteadmin_codes.h b/src/remoteadmin_codes.h new file mode 100644 index 0000000..65038eb --- /dev/null +++ b/src/remoteadmin_codes.h @@ -0,0 +1,32 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_REMOTEADMIN_CODES_H +#define _JS_REMOTEADMIN_CODES_H + +#define AF_RA_UNDEFINED 0 +#define AF_RA_CMD 1 +#define AF_RA_REPEAT 2 +#define AF_RA_STATUS_OK 3 +#define AF_RA_NOT_KNOWN 4 +#define AF_RA_FAILED 5 +#define AF_RA_KICKED 6 + +#endif diff --git a/src/remove_client_task.c b/src/remove_client_task.c new file mode 100644 index 0000000..a223c43 --- /dev/null +++ b/src/remove_client_task.c @@ -0,0 +1,134 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "logging.h" +#include "realmnames.h" +#include "clientnames.h" +#include "server_remove.h" +#include "remove_client_task.h" + +/* + * Function name: RCTdata_new + * Description: Creates and initializes new data for remove client task. + * Arguments: config - server configuration + * realm - the realm id + * client - the client id + * ra - if the client is in remote administration mode + * fdset - the descriptor set watched for read + * Returns: Pointer to newly created RCTdata structure. + */ + +RCTdata* +RCTdata_new(ServerConfiguration* config, int realm, int client, char ra, char reason, fd_set* set, fd_set* wset) +{ + RCTdata* tmp; + assert(config != NULL); + if (config == NULL) { + return NULL; + } + tmp = calloc(1, sizeof(RCTdata)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->config = config; + tmp->realm = realm; + tmp->client = client; + tmp->ra = ra; + tmp->reason = reason; + tmp->set = set; + tmp->wset = wset; + + return tmp; +} + +/* + * Function name: RCTdata_free + * Description: Frees the memory allocated for RCTdata structure. + * Arguments: ptr - pointer to pointer to RCTdata structure + */ + +void +RCTdata_free(void** ptr) +{ + RCTdata** data = (RCTdata**) ptr; + assert(data != NULL); + if (data == NULL) { + return; + } + assert((*data) != NULL); + if ((*data) == NULL) { + return; + } + free((*data)); + (*data) = NULL; +} + +/* + * Function name: RCTfunction + * Description: Function executed in the task by the task scheduler. + * Arguments: Pointer to the memory containing RCTdata structure. + */ + +void +RCTfunction(void* data) +{ + ConnectClient** clientsTable; + ServerRealm** realmsTable; + RCTdata* ptr; + assert(data != NULL); + if (data == NULL) { + return; + } + ptr = (RCTdata*) data; + realmsTable = ServerConfiguration_get_realmsTable(ptr->config); + if (ptr->ra) { + clientsTable = ServerRealm_get_raClientsTable(realmsTable[ptr->realm]); + } + else { + clientsTable = ServerRealm_get_clientsTable(realmsTable[ptr->realm]); + } + switch (ptr->reason) { + case RCT_REASON_TIMEOUT: + close(SslFd_get_fd(ConnectClient_get_sslFd(clientsTable[ptr->client]))); + FD_CLR(SslFd_get_fd(ConnectClient_get_sslFd(clientsTable[ptr->client])), ptr->set); + SSL_clear(SslFd_get_ssl(ConnectClient_get_sslFd(clientsTable[ptr->client]))); + ConnectClient_set_state(clientsTable[ptr->client], CONNECTCLIENT_STATE_FREE); + ServerRealm_decrease_connectedClients(realmsTable[ptr->realm]); + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "realm[%s]: Client[%s]%s: SSL_accept failed (timeout)", + get_realmname(ptr->config, ptr->realm), + ptr->ra ? get_raclientname(realmsTable[ptr->realm], ptr->client) : + get_clientname(realmsTable[ptr->realm], ptr->client), + ptr->ra ? " (ra)" : ""); + break; + case RCT_REASON_MAXIDLE: + aflog(LOG_T_CLIENT, LOG_I_WARNING, + "realm[%s]: Client[%s]: too long idle --> DROPPING", get_realmname(ptr->config, ptr->realm), + get_clientname(realmsTable[ptr->realm], ptr->client)); + remove_client(realmsTable[ptr->realm], ptr->client, ptr->set, ptr->wset, NULL); + } + ConnectClient_set_task(clientsTable[ptr->client], NULL); +} diff --git a/src/remove_client_task.h b/src/remove_client_task.h new file mode 100644 index 0000000..f229d2d --- /dev/null +++ b/src/remove_client_task.h @@ -0,0 +1,47 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_REMOVE_CLIENT_TASK_H +#define _JS_REMOVE_CLIENT_TASK_H + +#define RCT_REASON_TIMEOUT 0 +#define RCT_REASON_MAXIDLE 1 + +#include "server_configuration_struct.h" + +typedef struct { + ServerConfiguration* config; + int realm; + int client; + char ra; + char reason; + fd_set* set; + fd_set* wset; +} RCTdata; + +/* 'constructor' */ +RCTdata* RCTdata_new(ServerConfiguration* config, int realm, int client, char ra, char reason, + fd_set* set, fd_set* wset); +/* 'destructor' */ +void RCTdata_free(void** data); +/* other */ +void RCTfunction(void*); + +#endif diff --git a/src/server_check.c b/src/server_check.c new file mode 100644 index 0000000..4c20be1 --- /dev/null +++ b/src/server_check.c @@ -0,0 +1,112 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdio.h> +#include <stdlib.h> +#include <limits.h> +#include <assert.h> + +#include "server_check.h" +#include "stats.h" +#include "logging.h" + +/* + * Function name: check_value + * Description: Checks if the string is a valid positive int number. + * Arguments: what - the string representing number + * info - the information string printed on failure + * Returns: The decoded int number. + */ + +int +check_value(char* what, char* info) +{ + long tmp; + + assert(what != NULL); + assert(info != NULL); + + tmp = check_value_liberal(what, info); + + if (tmp <= 0) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "%s: %d\n", info, tmp); + exit(1); + } + return tmp; +} + +/* + * Function name: check_value_liberal + * Description: Checks if the string is a valid int number. + * Arguments: what - the string representing number + * info - the information string printed on failure + * Returns: The decoded int number. + */ + +int +check_value_liberal(char* what, char* info) +{ + char* znak; + long tmp; + + assert(what != NULL); + assert(info != NULL); + + if ((tmp = strtol(what, &znak, 10)) >= INT_MAX) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "%s: %s\n", info, what); + exit(1); + } + if (((*what) == '\0') || (*znak != '\0')) { + aflog(LOG_T_INIT, LOG_I_CRIT, + "%s: %s\n", info, what); + exit(1); + } + return tmp; +} + +/* + * Function name: check_long + * Description: Checks if the string is a valid long number. + * Arguments: text - the string representing number + * number - the pointer where decoded number will be stored + * Returns: 0 - success, + * 1 - value from outside the long number range, + * 2 - not the valid long number. + */ + +int +check_long(char* text, long* number) +{ + char* tmp; + if (((*number = strtol(text, &tmp, 10)) == LONG_MAX) || (*number == LONG_MIN)) { + return 1; + } + if ((*text != '\0') && (*tmp == '\0')) { + return 0; + } + else { + return 2; + } +} + diff --git a/src/server_check.h b/src/server_check.h new file mode 100644 index 0000000..fd4f03b --- /dev/null +++ b/src/server_check.h @@ -0,0 +1,29 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_SERVER_CHECK_H +#define _JS_SERVER_CHECK_H + +int check_value(char* what, char* info); +int check_value_liberal(char* what, char* info); +int check_long(char* text, long* number); + +#endif + diff --git a/src/server_configuration_struct.c b/src/server_configuration_struct.c new file mode 100644 index 0000000..7f88275 --- /dev/null +++ b/src/server_configuration_struct.c @@ -0,0 +1,421 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "string_functions.h" +#include "server_configuration_struct.h" + +/* + * Function name: ServerConfiguration_new + * Description: Create and initialize new ServerConfiguration structure. + * Returns: Pointer to newly created ServerConfiguration structure. + */ + +ServerConfiguration* +ServerConfiguration_new() +{ + ServerConfiguration* tmp = calloc(1, sizeof(ServerConfiguration)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: ServerConfiguration_free + * Description: Free the memory allocated for ServerConfiguration structure. + * Arguments: sc - pointer to pointer to ServerConfiguration structure + */ + +void +ServerConfiguration_free(ServerConfiguration** sc) +{ + int i; + assert(sc != NULL); + if (sc == NULL) { + return; + } + assert((*sc) != NULL); + if ((*sc) == NULL) { + return; + } + if ((*sc)->certificateFile) { + free((*sc)->certificateFile); + (*sc)->certificateFile = NULL; + } + if ((*sc)->cacertificateFile) { + free((*sc)->cacertificateFile); + (*sc)->cacertificateFile = NULL; + } + if ((*sc)->cacertificatePath) { + free((*sc)->cacertificatePath); + (*sc)->cacertificatePath = NULL; + } + if ((*sc)->sCertificateDepth) { + free((*sc)->sCertificateDepth); + (*sc)->sCertificateDepth = NULL; + } + if ((*sc)->keysFile) { + free((*sc)->keysFile); + (*sc)->keysFile = NULL; + } + if ((*sc)->dateFormat) { + free((*sc)->dateFormat); + (*sc)->dateFormat = NULL; + } + if ((*sc)->realmsTable) { + for (i = 0; i < (*sc)->realmsNumber; ++i) { + if ((*sc)->realmsTable[i]) { + ServerRealm_free(&((*sc)->realmsTable[i])); + } + } + free((*sc)->realmsTable); + (*sc)->realmsTable = NULL; + } + free((*sc)); + (*sc) = NULL; +} + +/* + * Function name: ServerConfiguration_set_certificateFile + * Description: Set certificate filename. + * Arguments: sc - pointer to ServerConfiguration structure + * certificateFile - certificate filename + */ + +void +ServerConfiguration_set_certificateFile(ServerConfiguration* sc, char* certificateFile) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->certificateFile), certificateFile); +} + +/* + * Function name: ServerConfiguration_set_cacertificateFile + * Description: Set CA certificate filename. + * Arguments: sc - pointer to ServerConfiguration structure + * certificateFile - CA certificate filename + */ + +void +ServerConfiguration_set_cacertificateFile(ServerConfiguration* sc, char* cacertificateFile) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->cacertificateFile), cacertificateFile); +} + +/* + * Function name: ServerConfiguration_set_cacertificatePath + * Description: Set CA certificate filename. + * Arguments: sc - pointer to ServerConfiguration structure + * cacertificateFile - CA certificate path + */ + +void +ServerConfiguration_set_cacertificatePath(ServerConfiguration* sc, char* cacertificatePath) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->cacertificatePath), cacertificatePath); +} + +void +ServerConfiguration_set_sCertificateDepth(ServerConfiguration* sc, char* sCertificateDepth) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->sCertificateDepth), sCertificateDepth); +} +void +ServerConfiguration_set_certificateDepth(ServerConfiguration* sc, int certificateDepth) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + sc->certificateDepth = certificateDepth; +} + +/* + * Function name: ServerConfiguration_set_keysFile + * Description: Set keys filename. + * Arguments: sc - pointer to ServerConfiguration structure + * keysFile - keys filename + */ + +void +ServerConfiguration_set_keysFile(ServerConfiguration* sc, char* keysFile) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->keysFile), keysFile); +} + +/* + * Function name: ServerConfiguration_set_dateFormat + * Description: Set format of the date string. + * Arguments: sc - pointer to ServerConfiguration structure + * dateFormat - format of the date string + */ + +void +ServerConfiguration_set_dateFormat(ServerConfiguration* sc, char* dateFormat) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + string_cp(&(sc->dateFormat), dateFormat); +} + +/* + * Function name: ServerConfiguration_set_realmsNumber + * Description: Set number of realms. + * Arguments: sc - pointer to ServerConfiguration structure + * realmsNumber - number of realms + */ + +void +ServerConfiguration_set_realmsNumber(ServerConfiguration* sc, int realmsNumber) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + sc->realmsNumber = realmsNumber; +} + +/* + * Function name: ServerConfiguration_set_startTime + * Description: Set start time of the server. + * Arguments: sc - pointer to ServerConfiguration structure + * startTime - start time of the server + */ + +void +ServerConfiguration_set_startTime(ServerConfiguration* sc, time_t startTime) +{ + assert(sc != NULL); + if (sc == NULL) { + return; + } + sc->startTime = startTime; +} + +/* + * Function name: ServerConfiguration_set_realmsTable + * Description: Set table of realms. + * Arguments: sc - pointer to ServerConfiguration structure + * realmsTable - table of realms + */ + +void +ServerConfiguration_set_realmsTable(ServerConfiguration* sc, ServerRealm** realmsTable) +{ + int i; + assert(sc != NULL); + if (sc == NULL) { + return; + } + if (sc->realmsTable) { + for (i = 0; i < sc->realmsNumber; ++i) { + if (sc->realmsTable[i]) { + ServerRealm_free(&(sc->realmsTable[i])); + } + } + free(sc->realmsTable); + sc->realmsTable = NULL; + } + sc->realmsTable = realmsTable; +} + +/* + * Function name: ServerConfiguration_get_certificateFile + * Description: Get certificate filename. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Certificate filename. + */ + +char* +ServerConfiguration_get_certificateFile(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->certificateFile; +} + +/* + * Function name: ServerConfiguration_get_cacertificateFile + * Description: Get CA certificate filename. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: CA Certificate filename. + */ + +char* +ServerConfiguration_get_cacertificateFile(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->cacertificateFile; +} + +/* + * Function name: ServerConfiguration_get_cacertificatePath + * Description: Get CA certificate path + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: CA Certificate path. + */ + +char* +ServerConfiguration_get_cacertificatePath(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->cacertificatePath; +} + +char* +ServerConfiguration_get_sCertificateDepth(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->sCertificateDepth; +} + +int +ServerConfiguration_get_certificateDepth(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return -1; + } + return sc->certificateDepth; +} + +/* + * Function name: ServerConfiguration_get_keysFile + * Description: Get keys filename. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Keys filename. + */ + +char* +ServerConfiguration_get_keysFile(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->keysFile; +} + +/* + * Function name: ServerConfiguration_get_dateFormat + * Description: Get format of the date string. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Format of the date string. + */ + +char* +ServerConfiguration_get_dateFormat(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->dateFormat; +} + +/* + * Function name: ServerConfiguration_get_realmsNumber + * Description: Get number of realms. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Number of realms. + */ + +int +ServerConfiguration_get_realmsNumber(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return -1; + } + return sc->realmsNumber; +} + +/* + * Function name: ServerConfiguration_get_startTime + * Description: Get start time of the server. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Start time of the server. + */ + +time_t +ServerConfiguration_get_startTime(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return 0; + } + return sc->startTime; +} + +/* + * Function name: ServerConfiguration_get_realmsTable + * Description: Get table of realms. + * Arguments: sc - pointer to ServerConfiguration structure + * Returns: Table of realms. + */ + +ServerRealm** +ServerConfiguration_get_realmsTable(ServerConfiguration* sc) +{ + assert(sc != NULL); + if (sc == NULL) { + return NULL; + } + return sc->realmsTable; +} diff --git a/src/server_configuration_struct.h b/src/server_configuration_struct.h new file mode 100644 index 0000000..caf7a9e --- /dev/null +++ b/src/server_configuration_struct.h @@ -0,0 +1,67 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_SERVER_CONFIGURATION_STRUCT_H +#define _JS_SERVER_CONFIGURATION_STRUCT_H + +#include "server_realm_struct.h" + +typedef struct { + char* cacertificateFile; + char* cacertificatePath; + char* sCertificateDepth; + int certificateDepth; + char* certificateFile; + char* keysFile; + char* dateFormat; + int realmsNumber; + time_t startTime; + ServerRealm** realmsTable; +} ServerConfiguration; + +/* 'constructor' */ +ServerConfiguration* ServerConfiguration_new(); +/* 'destructor' */ +void ServerConfiguration_free(ServerConfiguration** sc); +/* setters */ +void ServerConfiguration_set_certificateFile(ServerConfiguration* sc, char* certificateFile); +void ServerConfiguration_set_cacertificateFile(ServerConfiguration* sc, char* cacertificateFile); +void ServerConfiguration_set_cacertificatePath(ServerConfiguration* sc, char* cacertificatePath); +void ServerConfiguration_set_sCertificateDepth(ServerConfiguration* sc, char* sCertificateDepth); +void ServerConfiguration_set_certificateDepth(ServerConfiguration* sc, int certificateDepth); +void ServerConfiguration_set_keysFile(ServerConfiguration* sc, char* keysFile); +void ServerConfiguration_set_dateFormat(ServerConfiguration* sc, char* dateFormat); +void ServerConfiguration_set_realmsNumber(ServerConfiguration* sc, int realmsNumber); +void ServerConfiguration_set_startTime(ServerConfiguration* sc, time_t startTime); +void ServerConfiguration_set_realmsTable(ServerConfiguration* sc, ServerRealm** realmsTable); +/* getters */ +char* ServerConfiguration_get_certificateFile(ServerConfiguration* sc); +char* ServerConfiguration_get_cacertificateFile(ServerConfiguration* sc); +char* ServerConfiguration_get_cacertificatePath(ServerConfiguration* sc); +char* ServerConfiguration_get_sCertificateDepth(ServerConfiguration* sc); +int ServerConfiguration_get_certificateDepth(ServerConfiguration* sc); +char* ServerConfiguration_get_keysFile(ServerConfiguration* sc); +char* ServerConfiguration_get_dateFormat(ServerConfiguration* sc); +int ServerConfiguration_get_realmsNumber(ServerConfiguration* sc); +time_t ServerConfiguration_get_startTime(ServerConfiguration* sc); +ServerRealm** ServerConfiguration_get_realmsTable(ServerConfiguration* sc); + +#endif diff --git a/src/server_eval.c b/src/server_eval.c new file mode 100644 index 0000000..c4c69ce --- /dev/null +++ b/src/server_eval.c @@ -0,0 +1,123 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> +#include <string.h> + +#include "server_eval.h" + +/* + * Function name: eval_numofcon + * Description: Returns the real connection number on the afserver. + * Arguments: ptr - the server realm + * client - client number + * numofcon - the connection number on the afclient + * Returns: The real connection number on the afserver. + */ + +int +eval_numofcon(ServerRealm* ptr, int client, int numofcon) +{ + assert(ptr != NULL); + if ((numofcon >= 0) && (numofcon < ConnectClient_get_limit(ServerRealm_get_clientsTable(ptr)[client]))) { + numofcon = ConnectClient_get_users(ServerRealm_get_clientsTable(ptr)[client])[numofcon]; + } + else { + numofcon = -1; + } + return numofcon; +} + +/* + * Function name: eval_usernum + * Description: Returns the user number in the connected client on the afserver side. + * Arguments: ptr - the connected client + * usernum - the connection number on the afserver + * Returns: The user number in the connected client on the afserver side. + */ + +int +eval_usernum(ConnectClient* ptr, int usernum) +{ + int i; + assert(ptr != NULL); + for (i = 0; i < ConnectClient_get_limit(ptr); ++i) { + if (ConnectClient_get_users(ptr)[i] == usernum) + return i; + } + return -1; +} + +/* + * Function name: eval_UsrCliPair + * Description: Returns how many UsrCli structures are connected with the current manage port. + * Arguments: table - the table of UsrCli structures + * index - the current index of the evaluation + * host - the name of the host + * serv - the name of the service (port) + * Returns: How many UsrCli structures are connected with the current manage port. + */ + +int +eval_UsrCliPair(UsrCli** table, int index, char* host, char* serv) +{ + int i; + int result = 0; + assert(table != NULL); + assert(index >= 0); + for (i = 0; i < index; ++i) { + + if (UsrCli_get_manageHostName(table[i])) { + if (host) { + if (strcmp(UsrCli_get_listenHostName(table[i]), host)) { + continue; + } + } + else { + continue; + } + } + else { + if (host) { + continue; + } + } + + if (UsrCli_get_managePortName(table[i])) { + if (serv) { + if (strcmp(UsrCli_get_managePortName(table[i]), serv)) { + continue; + } + } + else { + continue; + } + } + else { + if (serv) { + continue; + } + } + + result++; + } + return result; +} diff --git a/src/server_eval.h b/src/server_eval.h new file mode 100644 index 0000000..a5471b1 --- /dev/null +++ b/src/server_eval.h @@ -0,0 +1,32 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "file.h" +#include "activefor.h" + +#ifndef _JS_SERVER_EVAL_H +#define _JS_SERVER_EVAL_H + +int eval_numofcon(ServerRealm*, int, int); +int eval_usernum(ConnectClient*, int); +int eval_UsrCliPair(UsrCli**, int, char*, char*); + +#endif + diff --git a/src/server_find.c b/src/server_find.c new file mode 100644 index 0000000..a2934a8 --- /dev/null +++ b/src/server_find.c @@ -0,0 +1,138 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> +#include <string.h> + +#include "server_find.h" + +/* + * Function name: find_client + * Description: Returns the client number with free user slots. + * Arguments: ptr - the server realm + * mode - the strategy of client choosing + * usrclipair - the number of usrclipair + * Returns: The client number with free user slots. + */ + +int +find_client(ServerRealm* ptr, char mode, int usrclipair) +{ + int i; + assert(ptr != NULL); + switch(mode) { + case 1: { /* fill first client before go to next */ + for (i = 0; i < ServerRealm_get_clientsLimit(ptr); ++i) { + if ((ConnectClient_get_state(ServerRealm_get_clientsTable(ptr)[i]) == + CONNECTCLIENT_STATE_ACCEPTED) && + (ConnectClient_get_usrCliPair(ServerRealm_get_clientsTable(ptr)[i]) == usrclipair)) { + if (ConnectClient_get_connected(ServerRealm_get_clientsTable(ptr)[i]) < + ConnectClient_get_limit(ServerRealm_get_clientsTable(ptr)[i])) { + return i; + } + } + } + break; + } + default: { + return 0; + } + } + return 0; +} + +/* + * Function name: find_usernum + * Description: Finds the free user slot, fill it and returns its number. + * Arguments: ptr - the connected client + * usernum - the connection number on the afserver + * Returns: The user number in the connected client on the afserver side. + */ + +int +find_usernum(ConnectClient* ptr, int usernum) +{ + int i; + assert(ptr != NULL); + for (i = 0; i < ConnectClient_get_limit(ptr); ++i) { + if (ConnectClient_get_users(ptr)[i] == -1) { + ConnectClient_get_users(ptr)[i] = usernum; + return i; + } + } + return -1; +} + +/* + * Function name: find_previousFd + * Description: Finds the file descriptor bound previously to the given + * host:serv. + * Arguments: table - the table of UsrCli structures + * index - the current index of the search + * host - the name of the host + * serv - the name of the service (port) + * Returns: The previously bound file descriptor. + */ + +int +find_previousFd(UsrCli** table, int index, char* host, char* serv) +{ + int i; + assert(table != NULL); + assert(index >= 0); + for (i = 0; i < index; ++i) { + + if (UsrCli_get_manageHostName(table[i])) { + if (host) { + if (strcmp(UsrCli_get_listenHostName(table[i]), host)) { + continue; + } + } + else { + continue; + } + } + else { + if (host) { + continue; + } + } + + if (UsrCli_get_managePortName(table[i])) { + if (serv) { + if (strcmp(UsrCli_get_managePortName(table[i]), serv)) { + continue; + } + } + else { + continue; + } + } + else { + if (serv) { + continue; + } + } + + return UsrCli_get_manageFd(table[i]); + } + return -1; +} diff --git a/src/server_find.h b/src/server_find.h new file mode 100644 index 0000000..83ad4d4 --- /dev/null +++ b/src/server_find.h @@ -0,0 +1,32 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "file.h" + +#ifndef _JS_SERVER_FIND_H +#define _JS_SERVER_FIND_H + +int find_client(ServerRealm*, char, int); +int find_usernum(ConnectClient*, int); +int find_previousFd(UsrCli**, int, char*, char*); + +#endif + diff --git a/src/server_get.c b/src/server_get.c new file mode 100644 index 0000000..cd13a75 --- /dev/null +++ b/src/server_get.c @@ -0,0 +1,123 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "server_get.h" +#include <stdlib.h> +#include <errno.h> +#include <assert.h> + +/* + * Function name: get_new_socket + * Description: Returns new accepted socket. + * Arguments: sockfd - the file descriptor of the listening socket + * type - the type of the listening socket + * addr - pointer to sockaddr structure + * addrlen - pointer to the length of the sockaddr structure + * tunneltype - the type of the connection + * Returns: The new accepted socket. + */ + +int +get_new_socket(int sockfd, char type, struct sockaddr *addr, socklen_t *addrlen, char* tunneltype) +{ + int tmp; + int n, i; + + assert(addr != NULL); + assert(addrlen != NULL); + assert(tunneltype != NULL); + + switch (type) { + case 0: { + return accept(sockfd, addr, addrlen); + break; + } + case 1: { + i = 0; + while (i < 4) { + if ((n = read(sockfd, &tmp+i, 4-i)) != (4-i)) { + sleep(2); + if ((n > 0) && (n < 4)) { + i += n; + continue; + } + if ((n == -1) && (errno == EAGAIN)) { + continue; + } + return -1; + } + else { + break; + } + } + i = 0; + while (i < 1) { + if ((n = read(sockfd, tunneltype+i, 1-i)) != (1-i)) { + if ((n == -1) && (errno == EAGAIN)) { + continue; + } + return -1; + } + else { + break; + } + } + i = 0; + while (i < 4) { + if ((n = read(sockfd, addrlen+i, 4-i)) != (4-i)) { + if ((n > 0) && (n < 4)) { + i += n; + continue; + } + if ((n == -1) && (errno == EAGAIN)) { + continue; + } + return -1; + } + else { + break; + } + } + i = 0; + while (i < *addrlen) { + if ((n = read(sockfd, addr+i, (*addrlen)-i)) != ((*addrlen)-i)) { + if ((n > 0) && (n < *addrlen)) { + i += n; + continue; + } + if ((n == -1) && (errno == EAGAIN)) { + continue; + } + return -1; + } + else { + break; + } + } + return tmp; + break; + } + default: { + return -1; + } + } +} diff --git a/src/server_get.h b/src/server_get.h new file mode 100644 index 0000000..2ad2656 --- /dev/null +++ b/src/server_get.h @@ -0,0 +1,31 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_SERVER_GET_H +#define _JS_SERVER_GET_H + +#include <unistd.h> +#include <sys/types.h> +#include <sys/socket.h> + +int get_new_socket(int sockfd, char type, struct sockaddr *addr, socklen_t *addrlen, char* tunneltype); + +#endif + diff --git a/src/server_realm_struct.c b/src/server_realm_struct.c new file mode 100644 index 0000000..c816ae3 --- /dev/null +++ b/src/server_realm_struct.c @@ -0,0 +1,1471 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "string_functions.h" +#include "server_realm_struct.h" + +/* + * Function name: ServerRealm_new + * Description: Create and initialize new ServerRealm structure. + * Returns: Pointer to newly created ServerRealm structure. + */ + +ServerRealm* +ServerRealm_new() +{ + ServerRealm* tmp = calloc(1, sizeof(ServerRealm)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->password[0] = 1; + tmp->password[1] = 2; + tmp->password[2] = 3; + tmp->password[3] = 4; + return tmp; +} + +/* + * Function name: ServerRealm_free + * Description: Free the memory allocated for ServerRealm structure. + * Arguments: sr - pointer to pointer to ServerRealm structure + */ + +void +ServerRealm_free(ServerRealm** sr) +{ + int i; + assert(sr != NULL); + if (sr == NULL) { + return; + } + assert((*sr) != NULL); + if ((*sr) == NULL) { + return; + } + if ((*sr)->hostName) { + free((*sr)->hostName); + (*sr)->hostName = NULL; + } + if ((*sr)->sUsersLimit) { + free((*sr)->sUsersLimit); + (*sr)->sUsersLimit = NULL; + } + if ((*sr)->sClientsLimit) { + free((*sr)->sClientsLimit); + (*sr)->sClientsLimit = NULL; + } + if ((*sr)->sRaClientsLimit) { + free((*sr)->sRaClientsLimit); + (*sr)->sRaClientsLimit = NULL; + } + if ((*sr)->sUsersPerClient) { + free((*sr)->sUsersPerClient); + (*sr)->sUsersPerClient = NULL; + } + if ((*sr)->sClientMode) { + free((*sr)->sClientMode); + (*sr)->sClientMode = NULL; + } + if ((*sr)->sTimeout) { + free((*sr)->sTimeout); + (*sr)->sTimeout = NULL; + } + if ((*sr)->realmName) { + free((*sr)->realmName); + (*sr)->realmName = NULL; + } + if ((*sr)->clientAddress) { + free((*sr)->clientAddress); + (*sr)->clientAddress = NULL; + } + if ((*sr)->usersTable) { + for (i = 0; i < (*sr)->usersLimit; ++i) { + if ((*sr)->usersTable[i]) { + ConnectUser_free(&((*sr)->usersTable[i])); + } + } + free((*sr)->usersTable); + (*sr)->usersTable = NULL; + } + if ((*sr)->clientsTable) { + for (i = 0; i < (*sr)->clientsLimit; ++i) { + if ((*sr)->clientsTable[i]) { + ConnectClient_free(&((*sr)->clientsTable[i])); + } + } + free((*sr)->clientsTable); + (*sr)->clientsTable = NULL; + } + if ((*sr)->raClientsTable) { + for (i = 0; i < (*sr)->raClientsLimit; ++i) { + if ((*sr)->raClientsTable[i]) { + ConnectClient_free(&((*sr)->raClientsTable[i])); + } + } + free((*sr)->raClientsTable); + (*sr)->raClientsTable = NULL; + } + if ((*sr)->usersClientsTable) { + for (i = 0; i < (*sr)->userClientPairs; ++i) { + if ((*sr)->usersClientsTable[i]) { + UsrCli_free(&((*sr)->usersClientsTable[i])); + } + } + free((*sr)->usersClientsTable); + (*sr)->usersClientsTable = NULL; + } + free((*sr)); + (*sr) = NULL; +} + +/* + * Function name: ServerRealm_set_hostName + * Description: Set realm's host name. + * Arguments: sr - pointer to ServerRealm structure + * hostName - realm's host name + */ + +void +ServerRealm_set_hostName(ServerRealm* sr, char* hostName) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->hostName), hostName); +} + +/* + * Function name: ServerRealm_set_sUsersLimit + * Description: Set users limit description. + * Arguments: sr - pointer to ServerRealm structure + * sUsersLimit - users limit description + */ + +void +ServerRealm_set_sUsersLimit(ServerRealm* sr, char* sUsersLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sUsersLimit), sUsersLimit); +} + +/* + * Function name: ServerRealm_set_sClientsLimit + * Description: Set clients limit description. + * Arguments: sr - pointer to ServerRealm structure + * sClientsLimit - clients limit description + */ + +void +ServerRealm_set_sClientsLimit(ServerRealm* sr, char* sClientsLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sClientsLimit), sClientsLimit); +} + +/* + * Function name: ServerRealm_set_sRaClientsLimit + * Description: Set raClients limit description. + * Arguments: sr - pointer to ServerRealm structure + * sRaClientsLimit - raClients limit description + */ + +void +ServerRealm_set_sRaClientsLimit(ServerRealm* sr, char* sRaClientsLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sRaClientsLimit), sRaClientsLimit); +} + +/* + * Function name: ServerRealm_set_sUsersPerClient + * Description: Set users per client description. + * Arguments: sr - pointer to ServerRealm structure + * sUsersPerClient - users per client description + */ + +void +ServerRealm_set_sUsersPerClient(ServerRealm* sr, char* sUsersPerClient) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sUsersPerClient), sUsersPerClient); +} + +/* + * Function name: ServerRealm_set_sClientMode + * Description: Set client mode description. + * Arguments: sr - pointer to ServerRealm structure + * sClientMode - client mode description + */ + +void +ServerRealm_set_sClientMode(ServerRealm* sr, char* sClientMode) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sClientMode), sClientMode); +} + +/* + * Function name: ServerRealm_set_sTimeout + * Description: Set timeout value description. + * Arguments: sr - pointer to ServerRealm structure + * sTimeout - timeout value description + */ + +void +ServerRealm_set_sTimeout(ServerRealm* sr, char* sTimeout) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sTimeout), sTimeout); +} + +/* + * Function name: ServerRealm_set_sMaxIdle + * Description: Sets max idle value description. + * Arguments: sr - pointer to ServerRealm structure + * sMaxIdle - max idle value description + */ + +void +ServerRealm_set_sMaxIdle(ServerRealm* sr, char* sMaxIdle) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->sMaxIdle), sMaxIdle); +} + +/* + * Function name: ServerRealm_set_realmName + * Description: Set realm's name. + * Arguments: sr - pointer to ServerRealm structure + * realmName - realm's name + */ + +void +ServerRealm_set_realmName(ServerRealm* sr, char* realmName) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + string_cp(&(sr->realmName), realmName); +} + +/* + * Function name: ServerRealm_set_password + * Description: Set realm's password. + * Arguments: sr - pointer to ServerRealm structure + * password - realm's password + */ + +void +ServerRealm_set_password(ServerRealm* sr, unsigned char* password) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + memcpy(sr->password, password, 4); +} + +/* + * Function name: ServerRealm_set_connectedUsers + * Description: Set number of connected users. + * Arguments: sr - pointer to ServerRealm structure + * connectedUsers - number of connected users + */ + +void +ServerRealm_set_connectedUsers(ServerRealm* sr, int connectedUsers) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->connectedUsers = connectedUsers; +} + +/* + * Function name: ServerRealm_set_usersLimit + * Description: Set limit of connected users. + * Arguments: sr - pointer to ServerRealm structure + * usersLimit - limit of connected users + */ + +void +ServerRealm_set_usersLimit(ServerRealm* sr, int usersLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->usersLimit = usersLimit; +} + +/* + * Function name: ServerRealm_set_connectedClients + * Description: Set number of connected clients. + * Arguments: sr - pointer to ServerRealm structure + * connectedClients - number of connected clients + */ + +void +ServerRealm_set_connectedClients(ServerRealm* sr, int connectedClients) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->connectedClients = connectedClients; +} + +/* + * Function name: ServerRealm_set_clientsLimit + * Description: Set limit of connected clients. + * Arguments: sr - pointer to ServerRealm structure + * clientsLimit - limit of connected clients + */ + +void +ServerRealm_set_clientsLimit(ServerRealm* sr, int clientsLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->clientsLimit = clientsLimit; +} + +/* + * Function name: ServerRealm_set_connectedRaClients + * Description: Set number of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + * connectedRaClients - number of connected raClients + */ + +void +ServerRealm_set_connectedRaClients(ServerRealm* sr, int connectedRaClients) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->connectedRaClients = connectedRaClients; +} + +/* + * Function name: ServerRealm_set_raClientsLimit + * Description: Set limit of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + * raClientsLimit - limit of connected raClients + */ + +void +ServerRealm_set_raClientsLimit(ServerRealm* sr, int raClientsLimit) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->raClientsLimit = raClientsLimit; +} + +/* + * Function name: ServerRealm_set_usersPerClient + * Description: Set users per client limit. + * Arguments: sr - pointer to ServerRealm structure + * usersPerClient - users per client limit + */ + +void +ServerRealm_set_usersPerClient(ServerRealm* sr, int usersPerClient) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->usersPerClient = usersPerClient; +} + +/* + * Function name: ServerRealm_set_timeout + * Description: Set timeout value. + * Arguments: sr - pointer to ServerRealm structure + * timeout - timeout value + */ + +void +ServerRealm_set_timeout(ServerRealm* sr, int timeout) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->timeout = timeout; +} + +/* + * Function name: ServerRealm_set_maxIdle + * Description: Sets mas idle value. + * Arguments: sr - pointer to ServerRealm structure + * maxIdle - max idle value + */ + +void +ServerRealm_set_maxIdle(ServerRealm* sr, int maxIdle) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->maxIdle = maxIdle; +} + +/* + * Function name: ServerRealm_set_clientMode + * Description: Set client mode. + * Arguments: sr - pointer to ServerRealm structure + * clientMode - client mode + */ + +void +ServerRealm_set_clientMode(ServerRealm* sr, int clientMode) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->clientMode = clientMode; +} + +/* + * Function name: ServerRealm_set_userClientPairs + * Description: Set user-client pairs amount. + * Arguments: sr - pointer to ServerRealm structure + * userClientPairs - user-client pairs amount + */ + +void +ServerRealm_set_userClientPairs(ServerRealm* sr, int userClientPairs) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->userClientPairs = userClientPairs; +} + +/* + * Function name: ServerRealm_set_clientsCounter + * Description: Set clients counter state. + * Arguments: sr - pointer to ServerRealm structure + * clientsCounter - clients counter state + */ + +void +ServerRealm_set_clientsCounter(ServerRealm* sr, int clientsCounter) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->clientsCounter = clientsCounter; +} + +/* + * Function name: ServerRealm_set_usersCounter + * Description: Set users counter state. + * Arguments: sr - pointer to ServerRealm structure + * usersCounter - users counter state + */ + +void +ServerRealm_set_usersCounter(ServerRealm* sr, int usersCounter) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->usersCounter = usersCounter; +} + +/* + * Function name: ServerRealm_set_realmType + * Description: Set type of the realm. + * Arguments: sr - pointer to ServerRealm structure + * realmType - type of the realm + */ + +void +ServerRealm_set_realmType(ServerRealm* sr, char realmType) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->realmType = realmType; +} + +/* + * Function name: ServerRealm_set_tunnelType + * Description: Set type of the tunnel. + * Arguments: sr - pointer to ServerRealm structure + * tunnelType - type of the tunnel + */ + +void +ServerRealm_set_tunnelType(ServerRealm* sr, char tunnelType) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->tunnelType = tunnelType; +} + +/* + * Function name: ServerRealm_set_dnsLookupsOn + * Description: Set dns lookups functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * dnsLookupsOn - dns lookups functionality on/off + */ + +void +ServerRealm_set_dnsLookupsOn(ServerRealm* sr, char dnsLookupsOn) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->dnsLookupsOn = dnsLookupsOn; +} + +/* + * Function name: ServerRealm_set_basePortOn + * Description: Set base port functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * basePortOn - base port functionality on/off + */ + +void +ServerRealm_set_basePortOn(ServerRealm* sr, char basePortOn) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->basePortOn = basePortOn; +} + +/* + * Function name: ServerRealm_set_auditOn + * Description: Set audit functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * auditOn - audit functionality on/off + */ + +void +ServerRealm_set_auditOn(ServerRealm* sr, char auditOn) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->auditOn = auditOn; +} + +/* + * Function name: ServerRealm_set_addressLength + * Description: Set client's address length. + * Arguments: sr - pointer to ServerRealm structure + * addressLength - client's address length + */ + +void +ServerRealm_set_addressLength(ServerRealm* sr, socklen_t addressLength) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + sr->addressLength = addressLength; +} + +/* + * Function name: ServerRealm_set_clientAddress + * Description: Set client's network address. + * Arguments: sr - pointer to ServerRealm structure + * clientAddress - client's network address + */ + +void +ServerRealm_set_clientAddress(ServerRealm* sr, struct sockaddr* clientAddress) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + if (sr->clientAddress) { + free(sr->clientAddress); + sr->clientAddress = NULL; + } + sr->clientAddress = clientAddress; +} + +/* + * Function name: ServerRealm_set_usersTable + * Description: Set table of users. + * Arguments: sr - pointer to ServerRealm structure + * usersTable - table of users + */ + +void +ServerRealm_set_usersTable(ServerRealm* sr, ConnectUser** usersTable) +{ + int i; + assert(sr != NULL); + if (sr == NULL) { + return; + } + if (sr->usersTable) { + for (i = 0; i < sr->usersLimit; ++i) { + if (sr->usersTable[i]) { + ConnectUser_free(&(sr->usersTable[i])); + } + } + free(sr->usersTable); + sr->usersTable = NULL; + } + sr->usersTable = usersTable; +} + +/* + * Function name: ServerRealm_set_clientsTable + * Description: Set table of clients. + * Arguments: sr - pointer to ServerRealm structure + * clientsTable - table of clients + */ + +void +ServerRealm_set_clientsTable(ServerRealm* sr, ConnectClient** clientsTable) +{ + int i; + assert(sr != NULL); + if (sr == NULL) { + return; + } + if (sr->clientsTable) { + for (i = 0; i < sr->clientsLimit; ++i) { + if (sr->clientsTable[i]) { + ConnectClient_free(&(sr->clientsTable[i])); + } + } + free(sr->clientsTable); + sr->clientsTable = NULL; + } + sr->clientsTable = clientsTable; +} + +/* + * Function name: ServerRealm_set_raClientsTable + * Description: Set table of raClients. + * Arguments: sr - pointer to ServerRealm structure + * raClientsTable - table of raClients + */ + +void +ServerRealm_set_raClientsTable(ServerRealm* sr, ConnectClient** raClientsTable) +{ + int i; + assert(sr != NULL); + if (sr == NULL) { + return; + } + if (sr->raClientsTable) { + for (i = 0; i < sr->raClientsLimit; ++i) { + if (sr->raClientsTable[i]) { + ConnectClient_free(&(sr->raClientsTable[i])); + } + } + free(sr->raClientsTable); + sr->raClientsTable = NULL; + } + sr->raClientsTable = raClientsTable; +} + +/* + * Function name: ServerRealm_set_usersClientsTable + * Description: Set table of user-client pairs. + * Arguments: sr - pointer to ServerRealm structure + * usersClientsTable - table of user-client pairs + */ + +void +ServerRealm_set_usersClientsTable(ServerRealm* sr, UsrCli** usersClientsTable) +{ + int i; + assert(sr != NULL); + if (sr == NULL) { + return; + } + if (sr->usersClientsTable) { + for (i = 0; i < sr->userClientPairs; ++i) { + if (sr->usersClientsTable[i]) { + UsrCli_free(&(sr->usersClientsTable[i])); + } + } + free(sr->usersClientsTable); + sr->usersClientsTable = NULL; + } + sr->usersClientsTable = usersClientsTable; +} + +/* + * Function name: ServerRealm_get_hostName + * Description: Get realm's host name. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Realm's host name. + */ + +char* +ServerRealm_get_hostName(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->hostName; +} + +/* + * Function name: ServerRealm_get_sUsersLimit + * Description: Get users limit description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Users limit description. + */ + +char* +ServerRealm_get_sUsersLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sUsersLimit; +} + +/* + * Function name: ServerRealm_get_sClientsLimit + * Description: Get clients limit description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Clients limit description. + */ + +char* +ServerRealm_get_sClientsLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sClientsLimit; +} + +/* + * Function name: ServerRealm_get_sRaClientsLimit + * Description: Get raClients limit description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: RaClients limit description. + */ + +char* +ServerRealm_get_sRaClientsLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sRaClientsLimit; +} + +/* + * Function name: ServerRealm_get_sUsersPerClient + * Description: Get users per client description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Users per client description. + */ + +char* +ServerRealm_get_sUsersPerClient(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sUsersPerClient; +} + +/* + * Function name: ServerRealm_get_sClientMode + * Description: Get client mode description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Client mode description. + */ + +char* +ServerRealm_get_sClientMode(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sClientMode; +} + +/* + * Function name: ServerRealm_get_sTimeout + * Description: Get timeout value description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Timeout value description. + */ + +char* +ServerRealm_get_sTimeout(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sTimeout; +} + +/* + * Function name: ServerRealm_get_sMaxIdle + * Description: Gets max idle value description. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Max idle value description. + */ + +char* +ServerRealm_get_sMaxIdle(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->sMaxIdle; +} + +/* + * Function name: ServerRealm_get_realmName + * Description: Get realm's name. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Realm's name. + */ + +char* +ServerRealm_get_realmName(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->realmName; +} + +/* + * Function name: ServerRealm_get_password + * Description: Get realm's password. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Realm's password. + */ + +unsigned char* +ServerRealm_get_password(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->password; +} + +/* + * Function name: ServerRealm_get_connectedUsers + * Description: Get number of connected users. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Number of connected users. + */ + +int +ServerRealm_get_connectedUsers(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->connectedUsers; +} + +/* + * Function name: ServerRealm_get_usersLimit + * Description: Get limit of connected users. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Limit of connected users. + */ + +int +ServerRealm_get_usersLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->usersLimit; +} + +/* + * Function name: ServerRealm_get_connectedClients + * Description: Get number of connected clients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Number of connected clients. + */ + +int +ServerRealm_get_connectedClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->connectedClients; +} + +/* + * Function name: ServerRealm_get_clientsLimit + * Description: Get limit of connected clients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Limit of connected clients. + */ + +int +ServerRealm_get_clientsLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->clientsLimit; +} + +/* + * Function name: ServerRealm_get_connectedRaClients + * Description: Get number of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Number of connected raClients. + */ + +int +ServerRealm_get_connectedRaClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->connectedRaClients; +} + +/* + * Function name: ServerRealm_get_raClientsLimit + * Description: Get limit of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Limit of connected raClients. + */ + +int +ServerRealm_get_raClientsLimit(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->raClientsLimit; +} + +/* + * Function name: ServerRealm_get_usersPerClient + * Description: Get users per client limit. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Users per client limit. + */ + +int +ServerRealm_get_usersPerClient(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->usersPerClient; +} + +/* + * Function name: ServerRealm_get_timeout + * Description: Get timeout value. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Timeout value. + */ + +int +ServerRealm_get_timeout(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->timeout; +} + +/* + * Function name: ServerRealm_get_maxIdle + * Description: Gets max idle value. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Max idle value. + */ + +int +ServerRealm_get_maxIdle(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->maxIdle; +} + +/* + * Function name: ServerRealm_get_clientMode + * Description: Get client mode. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Client mode. + */ + +int +ServerRealm_get_clientMode(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->clientMode; +} + +/* + * Function name: ServerRealm_get_userClientPairs + * Description: Get user-client pairs amount. + * Arguments: sr - pointer to ServerRealm structure + * Returns: User-client pairs amount. + */ + +int +ServerRealm_get_userClientPairs(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->userClientPairs; +} + +/* + * Function name: ServerRealm_get_clientsCounter + * Description: Get clients counter state. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Clients counter state. + */ + +int +ServerRealm_get_clientsCounter(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->clientsCounter; +} + +/* + * Function name: ServerRealm_get_usersCounter + * Description: Get users counter state. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Users counter state. + */ + +int +ServerRealm_get_usersCounter(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return -1; + } + return sr->usersCounter; +} + +/* + * Function name: ServerRealm_get_realmType + * Description: Get type of the realm. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Type of the realm. + */ + +char +ServerRealm_get_realmType(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->realmType; +} + +/* + * Function name: ServerRealm_get_tunnelType + * Description: Get type of the tunnel. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Type of the tunnel. + */ + +char +ServerRealm_get_tunnelType(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->tunnelType; +} + +/* + * Function name: ServerRealm_get_dnsLookupsOn + * Description: Get dns lookups functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Dns lookups functionality on/off. + */ + +char +ServerRealm_get_dnsLookupsOn(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->dnsLookupsOn; +} + +/* + * Function name: ServerRealm_get_basePortOn + * Description: Get base port functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Base port functionality on/off. + */ + +char +ServerRealm_get_basePortOn(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->basePortOn; +} + +/* + * Function name: ServerRealm_get_auditOn + * Description: Get audit functionality on/off. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Audit functionality on/off. + */ + +char +ServerRealm_get_auditOn(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->auditOn; +} + +/* + * Function name: ServerRealm_get_addressLength + * Description: Get client's address length. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Client's address length. + */ + +socklen_t +ServerRealm_get_addressLength(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return 0; + } + return sr->addressLength; +} + +/* + * Function name: ServerRealm_get_clientAddress + * Description: Get client's network address. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Client's network address. + */ + +struct sockaddr* +ServerRealm_get_clientAddress(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->clientAddress; +} + +/* + * Function name: ServerRealm_get_usersTable + * Description: Get table of users. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Table of users. + */ + +ConnectUser** +ServerRealm_get_usersTable(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->usersTable; +} + +/* + * Function name: ServerRealm_get_clientsTable + * Description: Get table of clients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Table of clients. + */ + +ConnectClient** +ServerRealm_get_clientsTable(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->clientsTable; +} + +/* + * Function name: ServerRealm_get_raClientsTable + * Description: Get table of raClients. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Table of raClients. + */ + +ConnectClient** +ServerRealm_get_raClientsTable(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->raClientsTable; +} + +/* + * Function name: ServerRealm_get_usersClientsTable + * Description: Get table of user-client pairs. + * Arguments: sr - pointer to ServerRealm structure + * Returns: Table of user-client pairs. + */ + +UsrCli** +ServerRealm_get_usersClientsTable(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return NULL; + } + return sr->usersClientsTable; +} + +/* + * Function name: ServerRealm_increase_connectedUsers + * Description: Increase number of connected users. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_increase_connectedUsers(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedUsers(sr, ServerRealm_get_connectedUsers(sr) + 1); +} + +/* + * Function name: ServerRealm_decrease_connectedUsers + * Description: Decrease number of connected users. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_decrease_connectedUsers(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedUsers(sr, ServerRealm_get_connectedUsers(sr) - 1); +} + +/* + * Function name: ServerRealm_increase_connectedClients + * Description: Increase number of connected clients. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_increase_connectedClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedClients(sr, ServerRealm_get_connectedClients(sr) + 1); +} + +/* + * Function name: ServerRealm_decrease_connectedClients + * Description: Decrease number of connected clients. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_decrease_connectedClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedClients(sr, ServerRealm_get_connectedClients(sr) - 1); +} + +/* + * Function name: ServerRealm_increase_connectedRaClients + * Description: Increase number of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_increase_connectedRaClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedRaClients(sr, ServerRealm_get_connectedRaClients(sr) + 1); +} + +/* + * Function name: ServerRealm_decrease_connectedRaClients + * Description: Decrease number of connected raClients. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_decrease_connectedRaClients(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_connectedRaClients(sr, ServerRealm_get_connectedRaClients(sr) - 1); +} + +/* + * Function name: ServerRealm_increase_usersCounter + * Description: Increase users counter state. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_increase_usersCounter(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_usersCounter(sr, ServerRealm_get_usersCounter(sr) + 1); +} + +/* + * Function name: ServerRealm_increase_clientsCounter + * Description: Increase clients counter state. + * Arguments: sr - pointer to ServerRealm structure + */ + +void +ServerRealm_increase_clientsCounter(ServerRealm* sr) +{ + assert(sr != NULL); + if (sr == NULL) { + return; + } + ServerRealm_set_clientsCounter(sr, ServerRealm_get_clientsCounter(sr) + 1); +} diff --git a/src/server_realm_struct.h b/src/server_realm_struct.h new file mode 100644 index 0000000..e057c99 --- /dev/null +++ b/src/server_realm_struct.h @@ -0,0 +1,147 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" + +#ifndef _JS_SERVER_REALM_STRUCT_H +#define _JS_SERVER_REALM_STRUCT_H + +typedef struct { + char* hostName; + char* sUsersLimit; + char* sClientsLimit; + char* sRaClientsLimit; + char* sUsersPerClient; + char* sClientMode; + char* sTimeout; + char* sMaxIdle; + char* realmName; + unsigned char password[4]; + int connectedUsers; + int usersLimit; + int connectedClients; + int clientsLimit; + int connectedRaClients; + int raClientsLimit; + int usersPerClient; + int timeout; + int maxIdle; + int clientMode; + int userClientPairs; + int clientsCounter; + int usersCounter; + char realmType; + char tunnelType; + char dnsLookupsOn; + char basePortOn; + char auditOn; + socklen_t addressLength; + struct sockaddr* clientAddress; + ConnectUser** usersTable; + ConnectClient** clientsTable; + ConnectClient** raClientsTable; + UsrCli** usersClientsTable; +} ServerRealm; + +/* 'constructor' */ +ServerRealm* ServerRealm_new(); +/* 'destructor' */ +void ServerRealm_free(ServerRealm** sr); +/* setters */ +void ServerRealm_set_hostName(ServerRealm* sr, char* hostName); +void ServerRealm_set_sUsersLimit(ServerRealm* sr, char* sUsersLimit); +void ServerRealm_set_sClientsLimit(ServerRealm* sr, char* sClientsLimit); +void ServerRealm_set_sRaClientsLimit(ServerRealm* sr, char* sRaClientsLimit); +void ServerRealm_set_sUsersPerClient(ServerRealm* sr, char* sUsersPerClient); +void ServerRealm_set_sClientMode(ServerRealm* sr, char* sClientMode); +void ServerRealm_set_sTimeout(ServerRealm* sr, char* sTimeout); +void ServerRealm_set_sMaxIdle(ServerRealm* sr, char* sMaxIdle); +void ServerRealm_set_realmName(ServerRealm* sr, char* realmName); +void ServerRealm_set_password(ServerRealm* sr, unsigned char* password); +void ServerRealm_set_connectedUsers(ServerRealm* sr, int connectedUsers); +void ServerRealm_set_usersLimit(ServerRealm* sr, int usersLimit); +void ServerRealm_set_connectedClients(ServerRealm* sr, int connectedClients); +void ServerRealm_set_clientsLimit(ServerRealm* sr, int clientsLimit); +void ServerRealm_set_connectedRaClients(ServerRealm* sr, int connectedRaClients); +void ServerRealm_set_raClientsLimit(ServerRealm* sr, int raClientsLimit); +void ServerRealm_set_usersPerClient(ServerRealm* sr, int usersPerClient); +void ServerRealm_set_timeout(ServerRealm* sr, int timeout); +void ServerRealm_set_maxIdle(ServerRealm* sr, int maxIdle); +void ServerRealm_set_clientMode(ServerRealm* sr, int clientMode); +void ServerRealm_set_userClientPairs(ServerRealm* sr, int userClientPairs); +void ServerRealm_set_clientsCounter(ServerRealm* sr, int clientsCounter); +void ServerRealm_set_usersCounter(ServerRealm* sr, int usersCounter); +void ServerRealm_set_realmType(ServerRealm* sr, char realmType); +void ServerRealm_set_tunnelType(ServerRealm* sr, char tunnelType); +void ServerRealm_set_dnsLookupsOn(ServerRealm* sr, char dnsLookupsOn); +void ServerRealm_set_basePortOn(ServerRealm* sr, char basePortOn); +void ServerRealm_set_auditOn(ServerRealm* sr, char auditOn); +void ServerRealm_set_addressLength(ServerRealm* sr, socklen_t addressLength); +void ServerRealm_set_clientAddress(ServerRealm* sr, struct sockaddr* clientAddress); +void ServerRealm_set_usersTable(ServerRealm* sr, ConnectUser** usersTable); +void ServerRealm_set_clientsTable(ServerRealm* sr, ConnectClient** clientsTable); +void ServerRealm_set_raClientsTable(ServerRealm* sr, ConnectClient** raClientsTable); +void ServerRealm_set_usersClientsTable(ServerRealm* sr, UsrCli** usersClientsTable); +/* getters */ +char* ServerRealm_get_hostName(ServerRealm* sr); +char* ServerRealm_get_sUsersLimit(ServerRealm* sr); +char* ServerRealm_get_sClientsLimit(ServerRealm* sr); +char* ServerRealm_get_sRaClientsLimit(ServerRealm* sr); +char* ServerRealm_get_sUsersPerClient(ServerRealm* sr); +char* ServerRealm_get_sClientMode(ServerRealm* sr); +char* ServerRealm_get_sTimeout(ServerRealm* sr); +char* ServerRealm_get_sMaxIdle(ServerRealm* sr); +char* ServerRealm_get_realmName(ServerRealm* sr); +unsigned char* ServerRealm_get_password(ServerRealm* sr); +int ServerRealm_get_connectedUsers(ServerRealm* sr); +int ServerRealm_get_usersLimit(ServerRealm* sr); +int ServerRealm_get_connectedClients(ServerRealm* sr); +int ServerRealm_get_clientsLimit(ServerRealm* sr); +int ServerRealm_get_connectedRaClients(ServerRealm* sr); +int ServerRealm_get_raClientsLimit(ServerRealm* sr); +int ServerRealm_get_usersPerClient(ServerRealm* sr); +int ServerRealm_get_timeout(ServerRealm* sr); +int ServerRealm_get_maxIdle(ServerRealm* sr); +int ServerRealm_get_clientMode(ServerRealm* sr); +int ServerRealm_get_userClientPairs(ServerRealm* sr); +int ServerRealm_get_clientsCounter(ServerRealm* sr); +int ServerRealm_get_usersCounter(ServerRealm* sr); +char ServerRealm_get_realmType(ServerRealm* sr); +char ServerRealm_get_tunnelType(ServerRealm* sr); +char ServerRealm_get_dnsLookupsOn(ServerRealm* sr); +char ServerRealm_get_basePortOn(ServerRealm* sr); +char ServerRealm_get_auditOn(ServerRealm* sr); +socklen_t ServerRealm_get_addressLength(ServerRealm* sr); +struct sockaddr* ServerRealm_get_clientAddress(ServerRealm* sr); +ConnectUser** ServerRealm_get_usersTable(ServerRealm* sr); +ConnectClient** ServerRealm_get_clientsTable(ServerRealm* sr); +ConnectClient** ServerRealm_get_raClientsTable(ServerRealm* sr); +UsrCli** ServerRealm_get_usersClientsTable(ServerRealm* sr); +/* other */ +void ServerRealm_increase_connectedUsers(ServerRealm* sr); +void ServerRealm_decrease_connectedUsers(ServerRealm* sr); +void ServerRealm_increase_connectedClients(ServerRealm* sr); +void ServerRealm_decrease_connectedClients(ServerRealm* sr); +void ServerRealm_increase_connectedRaClients(ServerRealm* sr); +void ServerRealm_decrease_connectedRaClients(ServerRealm* sr); +void ServerRealm_increase_usersCounter(ServerRealm* sr); +void ServerRealm_increase_clientsCounter(ServerRealm* sr); + +#endif diff --git a/src/server_remoteadmin.c b/src/server_remoteadmin.c new file mode 100644 index 0000000..1d10520 --- /dev/null +++ b/src/server_remoteadmin.c @@ -0,0 +1,762 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> + +#include "server_remoteadmin.h" + +static char newmessage; + +/* + * Function name: parse_int + * Description: This function parses the string as an integer and updates the buffer's + * parse pointer. + * Arguments: buff - string to parse + * ret - buffer's parse pointer + * Returns: Parsed integer value or -1, if something went wrong. + */ + +static int +parse_int(unsigned char* buff, int* ret) +{ + int intarg, i; + char guard; + + assert(buff != NULL); + assert(ret != NULL); + + if (((i = sscanf((char*) &buff[*ret], "%d%c", &intarg, &guard)) == 2) || (i == 1)) { + if (i == 1) { + guard = ' '; + } + if (!isspace(guard)) { + return -1; + } + guard = 0; + i = (*ret); + while (buff[i] != 0) { + if (guard == 0) { + if (isspace(buff[i])) { + guard = 1; + } + } + else { + if (!isspace(buff[i])) { + break; + } + } + ++i; + } + if (buff[i] == '.') { + ++i; + } + (*ret) = i; + return intarg; + } + else { + return -1; + } +} + +/* + * Function name: parse_cmd + * Description: This function parses the string as a command and updates the buffer's + * parse pointer. + * Arguments: buff - string to parse + * ret - buffer's parse pointer + * Returns: Parsed command number or 0, if something went wrong. + */ + +static int +parse_cmd(unsigned char* buff, int* ret) +{ + int i, j, state; + char cmd[31]; + + assert(buff != NULL); + assert(ret != NULL); + + i = j = state = 0; + newmessage = 1; + while (buff[i] != 0) { + if (state == 1) { + if (isspace(buff[i])) { + break; + } + else { + if (j == 30) { + return 0; + } + cmd[j] = buff[i]; + ++j; + } + } + if (state == 0) { + if (!isspace(buff[i])) { + cmd[j] = buff[i]; + j = 1; + state = 1; + } + } + ++i; + } + if (state == 0) { + return 0; + } + while (isspace(buff[i])) { + ++i; + } + if (buff[i] == '.') { + ++i; + } + (*ret) = i; + cmd[j] = 0; + if (strcmp(cmd, "help") == 0) { return 1; } + if (strcmp(cmd, "lcmd") == 0) { return 2; } + if (strcmp(cmd, "info") == 0) { return 3; } + if (strcmp(cmd, "rshow") == 0) { return 4; } + if (strcmp(cmd, "cshow") == 0) { return 5; } + if (strcmp(cmd, "ushow") == 0) { return 6; } + if (strcmp(cmd, "quit") == 0) { return 7; } + if (strcmp(cmd, "timeout") == 0) { return 8; } + if (strcmp(cmd, "audit") == 0) { return 9; } + if (strcmp(cmd, "dnslookups") == 0) { return 10; } + if (strcmp(cmd, "dateformat") == 0) { return 11; } + if (strcmp(cmd, "kuser") == 0) { return 12; } + if (strcmp(cmd, "kclient") == 0) { return 13; } + return 0; +} + +/* + * Function name: send_adm_message + * Description: Sends the message via the network. + * Arguments: type - the type of the connection + * master - pointer to SslFd structure + * buff - the message to send + * st - the result of the command + */ + +static void +send_adm_message(char type, SslFd* master, unsigned char* buff, unsigned char st) +{ + int n; + + assert(master != NULL); + assert(buff != NULL); + + if (!newmessage) { + n = strlen((char*) &buff[5]); + } + else { + n = 0; + } + buff[0] = AF_S_ADMIN_CMD; + buff[1] = st; + buff[2] = AF_RA_UNDEFINED; + buff[3] = n >> 8; /* high bits of message length */ + buff[4] = n; /* low bits of message length */ + SslFd_send_message(type, master, buff, n+5); +} + +/* + * Function name: add_to_message + * Description: Adds text to the message. + * Arguments: buff - the message we are adding text to + * format - the format of the text + * ... - additional arguments + */ + +static void +add_to_message(unsigned char* buff, const char* format, ...) +{ + va_list ap; + int n; + + assert(buff != NULL); + assert(format != NULL); + + if (!newmessage) { + n = strlen((char*) &buff[5]); + } + else { + n = 0; + } + newmessage = 0; + va_start(ap, format); + + vsprintf((char*) &buff[5+n], format, ap); + n = strlen((char*) &buff[5]); + sprintf((char*) &buff[5+n], "\n"); + + va_end(ap); +} + +/* + * Function name: add_uptime_to_message + * Description: Adds the formatted time period to the message. + * Arguments: buff - the message we are adding formatted time period to + * info - the info which will be added to the message just before the time + * period - the time period we are adding to the message + */ + +static void +add_uptime_to_message(unsigned char* buff, char* info, time_t period) +{ + int hours, minutes, seconds; + + assert(buff != NULL); + assert(info != NULL); + + hours = period/3600; + minutes = (period/60)%60; + seconds = period%60; + + if (hours) { + add_to_message(buff, "%s: %d:%02d:%02d", info, hours, minutes, seconds); + } + else { + add_to_message(buff, "%s: %d:%02d", info, minutes, seconds); + } +} + +/* + * Function name: serve_admin + * Description: Function responsible for the reaction for user's admin commands. + * Arguments: config - the server configuration + * realm - the realm number + * client - the client number + * buff - buffer containing the user's command + * Returns: 0 - do nothing, + * 1 - kick this client, + * >1 - kick the specified client. + */ + +int +serve_admin(ServerConfiguration* config, int realm, int client, unsigned char* buff) +{ + int length, n, i, j, ret; + time_t now, tmp; + llnodeT* llptr; + AuditListNode* alptr; + char olddf[51], newdf[51]; + ConnectClient* cpointer; + ConnectUser* upointer; + ServerRealm* pointer = ServerConfiguration_get_realmsTable(config)[realm]; + char type = ServerRealm_get_realmType(pointer) | TYPE_SSL | TYPE_ZLIB; + SslFd* master = ConnectClient_get_sslFd(ServerRealm_get_raClientsTable(pointer)[client]); + + assert(config != NULL); + assert(buff != NULL); + + olddf[50] = newdf[50] = 0; + length = buff[3]; + length = length << 8; + length += buff[4]; /* this is the length of a message */ + + time(&now); + + switch (buff[1]) { + case AF_RA_CMD: { + n = SslFd_get_message(type, master, buff, length); + buff[n] = 0; + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: admin: message length = %d [%s]", + get_realmname(config, realm), n, buff); + switch (parse_cmd(buff, &ret)) { + case 1: { /* help */ + add_to_message(buff, AF_VER("AFSERVER")); + add_to_message(buff, "\nValid commands are:"); + add_to_message(buff, " help display help"); + add_to_message(buff, " lcmd lists available commands"); + add_to_message(buff, " info prints info about server"); + add_to_message(buff, " rshow display realms"); + add_to_message(buff, " cshow X display clients in X realm"); + add_to_message(buff, " ushow X display users in X realm"); + add_to_message(buff, " quit quit connection"); + add_to_message(buff, " timeout N X set timeout value in X realm"); + add_to_message(buff, " audit {0|1} X set audit mode in X realm"); + add_to_message(buff, " dnslookups {0|1} X set dnslookups mode in X realm"); + add_to_message(buff, " dateformat S set dateformat"); + add_to_message(buff, " kuser S kick user named S"); + add_to_message(buff, " kclient N kick client with number N"); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + case 2: { /* lcmd */ + add_to_message(buff, "help"); + add_to_message(buff, "lcmd"); + add_to_message(buff, "info"); + add_to_message(buff, "rshow"); + add_to_message(buff, "cshow"); + add_to_message(buff, "ushow"); + add_to_message(buff, "quit"); + add_to_message(buff, "timeout"); + add_to_message(buff, "audit"); + add_to_message(buff, "dnslookups"); + add_to_message(buff, "dateformat"); + add_to_message(buff, "kuser"); + add_to_message(buff, "kclient"); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + case 3: { /* info */ + add_to_message(buff, AF_VER("Version:")); + add_to_message(buff, "Realms: %d", + ServerConfiguration_get_realmsNumber(config)); + add_to_message(buff, "Certificate: %s", + ServerConfiguration_get_certificateFile(config)); + add_to_message(buff, "Key: %s", + ServerConfiguration_get_keysFile(config)); + llptr = getloglisthead(); + i = 0; + while (llptr) { + add_to_message(buff, "log[%d]: %s", i, llptr->cmdline); + llptr = llptr->next; + ++i; + } + tmp = now - ServerConfiguration_get_startTime(config); + add_uptime_to_message(buff, "Uptime", tmp); + add_to_message(buff, "Cg: %ld B", getcg()); + add_to_message(buff, "Dateformat: %s", getdateformat()); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + case 4: { /* rshow */ + for (i = 0; i < ServerConfiguration_get_realmsNumber(config); ++i) { + pointer = ServerConfiguration_get_realmsTable(config)[i]; + add_to_message(buff, "\nRealm[%s]:", get_realmname(config, i)); + add_to_message(buff, "hostname: %s", ServerRealm_get_hostName(pointer)); + add_to_message(buff, "users: %d (max: %d)", + ServerRealm_get_connectedUsers(pointer), + ServerRealm_get_usersLimit(pointer)); + add_to_message(buff, "clients: %d (max: %d)", + ServerRealm_get_connectedClients(pointer) - + ServerRealm_get_connectedRaClients(pointer), + ServerRealm_get_clientsLimit(pointer)); + add_to_message(buff, "raclients: %d (max: %d)", + ServerRealm_get_connectedRaClients(pointer), + ServerRealm_get_raClientsLimit(pointer)); + add_to_message(buff, "users per client: %s", + ServerRealm_get_sUsersPerClient(pointer)); + add_to_message(buff, "user-client pairs: %d", + ServerRealm_get_userClientPairs(pointer)); + for (j = 0; j < ServerRealm_get_userClientPairs(pointer); ++j) { + add_to_message(buff, " pair[%d]: listenport: %s, manageport: %s", j, + UsrCli_get_listenPortName( + ServerRealm_get_usersClientsTable(pointer)[j]), + UsrCli_get_managePortName( + ServerRealm_get_usersClientsTable(pointer)[j])); + } + add_to_message(buff, "climode: %s", ServerRealm_get_sClientMode(pointer)); + add_to_message(buff, "timeout: %d", ServerRealm_get_timeout(pointer)); + if (ServerRealm_get_maxIdle(pointer)) { + add_to_message(buff, "max idle: %d", ServerRealm_get_maxIdle(pointer)); + } + else { + add_to_message(buff, "max idle: disabled"); + } + add_to_message(buff, "baseport: %s", ServerRealm_get_basePortOn(pointer) ? + "yes" : "no"); + add_to_message(buff, "audit: %s", ServerRealm_get_auditOn(pointer) ? + "yes" : "no"); + add_to_message(buff, "dnslookups: %s", + ServerRealm_get_dnsLookupsOn(pointer) ? "yes" : "no"); + add_to_message(buff, "ssl: %s, zlib: %s, mode: %s", + (TYPE_IS_SSL(ServerRealm_get_realmType(pointer))) ? "yes" : "no", + (TYPE_IS_ZLIB(ServerRealm_get_realmType(pointer))) ? "yes" : "no", + (TYPE_IS_TCP(ServerRealm_get_realmType(pointer))) ? "tcp" : "udp"); + switch (ServerRealm_get_tunnelType(pointer)) { + case CONNECTCLIENT_TUNNELTYPE_DIRECT: { + add_to_message(buff, "tunneltype: direct"); + break; + } + case CONNECTCLIENT_TUNNELTYPE_HTTPPROXY: { + add_to_message(buff, "tunneltype: http proxy"); + break; + } + case CONNECTCLIENT_TUNNELTYPE_HTTPSPROXY: { + add_to_message(buff, "tunneltype: https proxy"); + break; + } + default: { + add_to_message(buff, "tunneltype: UNKNOWN"); + } + } + } + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + case 5: { /* cshow*/ + n = get_realmnumber(config, (char*) &buff[ret]); + if ((n >= 0) && (n < ServerConfiguration_get_realmsNumber(config))) { + pointer = ServerConfiguration_get_realmsTable(config)[n]; + for (i = 0; i < ServerRealm_get_clientsLimit(pointer); ++i) { + cpointer = ServerRealm_get_clientsTable(pointer)[i]; + if (ConnectClient_get_state(cpointer) != CONNECTCLIENT_STATE_FREE) { + add_to_message(buff, "\nClient[%s]:", + get_clientname(pointer, i)); + switch (ConnectClient_get_state(cpointer)) { + case CONNECTCLIENT_STATE_CONNECTING: { + add_to_message(buff, "state: ssl handshake"); + break; + } + case CONNECTCLIENT_STATE_AUTHORIZING: { + add_to_message(buff, "state: authorization"); + break; + } + case CONNECTCLIENT_STATE_ACCEPTED: { + add_to_message(buff, "state: running"); + break; + } + default: { + add_to_message(buff, "state: unknown"); + } + } + add_to_message(buff, "users: %d (max: %d)", + ConnectClient_get_connected(cpointer), + ConnectClient_get_limit(cpointer)); + add_to_message(buff, "user-client pair: %d", + ConnectClient_get_usrCliPair(cpointer)); + tmp = now - ConnectClient_get_connectTime(cpointer); + add_uptime_to_message(buff, "Connection time", tmp); + tmp = now - ConnectClient_get_lastActivity(cpointer); + add_uptime_to_message(buff, "Idle time", tmp); + add_to_message(buff, "Id: %s", + (ConnectClient_get_sClientId(cpointer) == NULL) ? "" : + ConnectClient_get_sClientId(cpointer)); + add_to_message(buff, "Number: %d", + ConnectClient_get_clientId(cpointer)); + add_to_message(buff, "IP: %s, port: %s", + ConnectClient_get_nameBuf(cpointer), + ConnectClient_get_portBuf(cpointer)); + switch (ConnectClient_get_tunnelType(cpointer)) { + case CONNECTCLIENT_TUNNELTYPE_DIRECT: { + add_to_message(buff, "tunneltype: direct"); + break; + } + case CONNECTCLIENT_TUNNELTYPE_HTTPPROXY: { + add_to_message(buff, "tunneltype: http proxy"); + break; + } + case CONNECTCLIENT_TUNNELTYPE_HTTPSPROXY: { + add_to_message(buff, "tunneltype: https proxy"); + break; + } + default: { + add_to_message(buff, "tunneltype: UNKNOWN"); + } + } + if (ServerRealm_get_auditOn(pointer)) { + add_to_message(buff, "auditlog:"); + alptr = AuditList_get_first( + ConnectClient_get_auditList(cpointer)); + while (alptr) { + add_to_message(buff, + "userid: %d ip: %s port: %s connected: %s duration: %s", + AuditListNode_get_userId(alptr), + AuditListNode_get_nameBuf(alptr), + AuditListNode_get_portBuf(alptr), + localdate(AuditListNode_get_connectTimep(alptr)), + timeperiod(AuditListNode_get_duration(alptr))); + alptr = AuditListNode_get_nextNode(alptr); + } + } + } + } + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + add_to_message(buff, "Wrong realm name"); + add_to_message(buff, "Usage: cshow X , X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + case 6: { /* ushow */ + n = get_realmnumber(config, (char*) &buff[ret]); + if ((n >= 0) && (n < ServerConfiguration_get_realmsNumber(config))) { + pointer = ServerConfiguration_get_realmsTable(config)[n]; + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + upointer = ServerRealm_get_usersTable(pointer)[i]; + if (ConnectUser_get_state(upointer) != S_STATE_CLEAR) { + add_to_message(buff, "\nUser[%d]:", + get_username(pointer, i)); + switch (ConnectUser_get_state(upointer)) { + case S_STATE_CLOSING: { + add_to_message(buff, "state: closing"); + break; + } + case S_STATE_OPENING: { + add_to_message(buff, "state: opening"); + break; + } + case S_STATE_OPENING_CLOSED: { + add_to_message(buff, "state: opening (closed)"); + break; + } + case S_STATE_OPEN: { + add_to_message(buff, "state: running"); + break; + } + case S_STATE_STOPPED: { + add_to_message(buff, "state: stopped"); + break; + } + default: { + add_to_message(buff, "state: unknown"); + } + } + add_to_message(buff, "connected to: Client[%s]", + get_clientname(pointer, ConnectUser_get_whatClient(upointer))); + tmp = now-ConnectUser_get_connectTime(upointer); + add_uptime_to_message(buff, "Connection time", tmp); + tmp = now - UserStats_get_lastActivity( + ConnectUser_get_stats(upointer)); + add_uptime_to_message(buff, "Idle time", tmp); + add_to_message(buff, "IP: %s, port: %s", + ConnectUser_get_nameBuf(upointer), + ConnectUser_get_portBuf(upointer)); + add_to_message(buff, "Downloaded: %d bytes", + UserStats_get_totalDownloadedBytes( + ConnectUser_get_stats(upointer))); + add_to_message(buff, "download speed: %.2f B/s", + UserStats_get_downloadSpeed( + ConnectUser_get_stats(upointer))); + add_to_message(buff, "Uploaded: %d bytes", + UserStats_get_totalUploadedBytes( + ConnectUser_get_stats(upointer))); + add_to_message(buff, "upload speed: %.2f B/s", + UserStats_get_uploadSpeed( + ConnectUser_get_stats(upointer))); + } + } + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + add_to_message(buff, "Wrong realm name"); + add_to_message(buff, "Usage: ushow X , X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + case 7: { /* quit */ + aflog(LOG_T_MANAGE, LOG_I_INFO, + "realm[%s]: Client[%s] (ra): commfd: CLOSED", + get_realmname(config, realm), + get_raclientname(pointer, client)); + send_adm_message(type, master, buff, AF_RA_KICKED); + return 1; + } + case 8: { /* timeout */ + i = parse_int(buff, &ret); + if (i <= 0) { + add_to_message(buff, "Invalid timeout value"); + add_to_message(buff, + "Usage: timeout N X , N - new timeout value, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + n = get_realmnumber(config, (char*) &buff[ret]); + if ((n >= 0) && (n < ServerConfiguration_get_realmsNumber(config))) { + add_to_message(buff, "changed timeout: %d --> %d", + ServerRealm_get_timeout( + ServerConfiguration_get_realmsTable(config)[n]), i); + ServerRealm_set_timeout(ServerConfiguration_get_realmsTable(config)[n], i); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + add_to_message(buff, "Wrong realm name"); + add_to_message(buff, + "Usage: timeout N X , N - new timeout value, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + case 9: { /* audit */ + i = parse_int(buff, &ret); + if ((i != 0) && (i != 1)) { + add_to_message(buff, "Invalid audit value"); + add_to_message(buff, + "Usage: audit {0|1} X , N=0 off, N=1 on, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + n = get_realmnumber(config, (char*) &buff[ret]); + if ((n >= 0) && (n < ServerConfiguration_get_realmsNumber(config))) { + add_to_message(buff, "changed audit: %s --> %s", + ServerRealm_get_auditOn( + ServerConfiguration_get_realmsTable(config)[n]) ? "yes" : "no", + i ? "yes" : "no"); + ServerRealm_set_auditOn(ServerConfiguration_get_realmsTable(config)[n], i); + if (i == 0) { + for (i = 0; i < ServerRealm_get_clientsLimit( + ServerConfiguration_get_realmsTable(config)[n]); ++i) { + AuditList_clear( + ConnectClient_get_auditList( + ServerRealm_get_clientsTable( + ServerConfiguration_get_realmsTable(config)[n])[i])); + } + } + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + add_to_message(buff, "Wrong realm name"); + add_to_message(buff, + "Usage: audit {0|1} X , N=0 off, N=1 on, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + case 10: { /* dnslookups */ + i = parse_int(buff, &ret); + if ((i != 0) && (i != 1)) { + add_to_message(buff, "Invalid dnslookups value"); + add_to_message(buff, + "Usage: dnslookups {0|1} X , N=0 off, N=1 on, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + n = get_realmnumber(config, (char*) &buff[ret]); + if ((n >= 0) && (n < ServerConfiguration_get_realmsNumber(config))) { + add_to_message(buff, "changed dnslookups: %s --> %s", + ServerRealm_get_dnsLookupsOn( + ServerConfiguration_get_realmsTable(config)[n]) ? "yes" : "no", + i ? "yes" : "no"); + ServerRealm_set_dnsLookupsOn( + ServerConfiguration_get_realmsTable(config)[n], i); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + add_to_message(buff, "Wrong realm name"); + add_to_message(buff, + "Usage: dnslookups {0|1} X , N=0 off, N=1 on, X - realm name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + case 11: { /* dateformat */ + strncpy(olddf, getdateformat(), 50); + strncpy(newdf, (char*) &buff[ret], 50); + add_to_message(buff, "changed dateformat: %s --> %s", + olddf, newdf); + setdateformat(newdf); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + break; + } + case 12: { /* kuser */ + i = parse_int(buff, &ret); + if (buff[ret] != 0) { + add_to_message(buff, "Invalid user name"); + add_to_message(buff, + "Usage: kuser S , S - user name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + j = -1; + for (n = 0; n < ServerConfiguration_get_realmsNumber(config); ++n) { + pointer = ServerConfiguration_get_realmsTable(config)[n]; + j = get_usernumber(pointer, i); + if (j != (-1)) { + upointer = ServerRealm_get_usersTable(pointer)[j]; + if ((ConnectUser_get_state(upointer) == S_STATE_OPEN) || + (ConnectUser_get_state(upointer) == S_STATE_OPENING) || + (ConnectUser_get_state(upointer) == S_STATE_STOPPED)) { + add_to_message(buff, "kicked: realm[%s] user[%d]", + get_realmname(config, n), get_username(pointer, j)); + if (ConnectUser_get_state(upointer) == S_STATE_OPENING) { + ConnectUser_set_state(upointer, S_STATE_OPENING_CLOSED); + } + else { + close(ConnectUser_get_connFd(upointer)); + } + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + } + else { + add_to_message(buff, "Invalid user"); + add_to_message(buff, + "Usage: kuser S , S - user name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + } + break; + } + } + if (j == (-1)) { + add_to_message(buff, "Invalid user name"); + add_to_message(buff, + "Usage: kuser S , S - user name"); + send_adm_message(type, master, buff, AF_RA_FAILED); + } + break; + } + case 13: { /* kclient */ + i = parse_int(buff, &ret); + if (buff[ret] != 0) { + add_to_message(buff, "Invalid client number"); + add_to_message(buff, + "Usage: kclient N , N - client number"); + send_adm_message(type, master, buff, AF_RA_FAILED); + break; + } + j = -1; + for (n = 0; n < ServerConfiguration_get_realmsNumber(config); ++n) { + pointer = ServerConfiguration_get_realmsTable(config)[n]; + j = get_clientnumber(pointer, i); + if (j != (-1)) { + if (ConnectClient_get_state(ServerRealm_get_clientsTable(pointer)[j]) > + CONNECTCLIENT_STATE_FREE) { + add_to_message(buff, "kicked: realm[%s] client[%s]", + get_realmname(config, n), + get_clientname(pointer, j)); + send_adm_message(type, master, buff, AF_RA_STATUS_OK); + return (i+2); + } + else { + add_to_message(buff, "Invalid client"); + add_to_message(buff, + "Usage: kclient N , N - client number"); + send_adm_message(type, master, buff, AF_RA_FAILED); + } + break; + } + } + if (j == (-1)) { + add_to_message(buff, "Invalid client number"); + add_to_message(buff, + "Usage: kclient N , N - client number"); + send_adm_message(type, master, buff, AF_RA_FAILED); + } + break; + + } + default: { + aflog(LOG_T_MANAGE, LOG_I_WARNING, + "realm[%s]: admin: cmd ignored", get_realmname(config, realm)); + send_adm_message(type, master, buff, AF_RA_UNDEFINED); + } + } + break; + } + case AF_RA_REPEAT: { + break; + } + default: { + aflog(LOG_T_MANAGE, LOG_I_ERR, + "Unrecognized message from remote admin --> closing"); + return 1; + } + } + return 0; +} diff --git a/src/server_remoteadmin.h b/src/server_remoteadmin.h new file mode 100644 index 0000000..4b74b5d --- /dev/null +++ b/src/server_remoteadmin.h @@ -0,0 +1,37 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_SERVER_REMOTEADMIN_H +#define _JS_SERVER_REMOTEADMIN_H + +#include <ctype.h> +#include <string.h> + +#include "remoteadmin_codes.h" +#include "activefor.h" +#include "logging.h" +#include "stats.h" +#include "clientnames.h" +#include "realmnames.h" +#include "usernames.h" + +int serve_admin(ServerConfiguration*, int, int, unsigned char*); + +#endif diff --git a/src/server_remove.c b/src/server_remove.c new file mode 100644 index 0000000..c8f78f1 --- /dev/null +++ b/src/server_remove.c @@ -0,0 +1,121 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <assert.h> + +#include "server_remove.h" + +/* + * Function name: remove_client + * Description: Removes the client. + * Arguments: ptr - the server realm + * client - the client number + * set - the set of file descriptors for reading + * wset - the set of file descriptors for writing + * scheduler - the task scheduler + */ + +void +remove_client(ServerRealm* ptr, int client, fd_set* set, fd_set* wset, TaskScheduler* scheduler) +{ + int i; + Task* task; + + assert(ptr != NULL); + assert(client >= 0); + assert(set != NULL); + assert(wset != NULL); + + if (ConnectClient_get_state(ServerRealm_get_clientsTable(ptr)[client]) == CONNECTCLIENT_STATE_ACCEPTED) { + for (i = 0; i < ServerRealm_get_usersLimit(ptr); ++i) { + if (ConnectUser_get_whatClient(ServerRealm_get_usersTable(ptr)[i]) == client) { + if (ConnectUser_get_state(ServerRealm_get_usersTable(ptr)[i]) != S_STATE_CLEAR) { + ConnectUser_set_state(ServerRealm_get_usersTable(ptr)[i], S_STATE_CLEAR); + FD_CLR(ConnectUser_get_connFd(ServerRealm_get_usersTable(ptr)[i]), set); + FD_CLR(ConnectUser_get_connFd(ServerRealm_get_usersTable(ptr)[i]), wset); + close(ConnectUser_get_connFd(ServerRealm_get_usersTable(ptr)[i])); + ServerRealm_decrease_connectedUsers(ptr); + } + } + } + } + for (i = 0; i < ConnectClient_get_limit(ServerRealm_get_clientsTable(ptr)[client]); ++i) { + ConnectClient_get_users(ServerRealm_get_clientsTable(ptr)[client])[i] = -1; + } + if ((ServerRealm_get_clientsLimit(ptr) != client) && (ServerRealm_get_basePortOn(ptr) == 1)) { + close(ConnectClient_get_listenFd(ServerRealm_get_clientsTable(ptr)[client])); + FD_CLR(ConnectClient_get_listenFd(ServerRealm_get_clientsTable(ptr)[client]), set); + } + ConnectClient_set_sClientId(ServerRealm_get_clientsTable(ptr)[client], NULL); + ConnectClient_set_connected(ServerRealm_get_clientsTable(ptr)[client], 0); + close(SslFd_get_fd(ConnectClient_get_sslFd(ServerRealm_get_clientsTable(ptr)[client]))); + FD_CLR(SslFd_get_fd(ConnectClient_get_sslFd(ServerRealm_get_clientsTable(ptr)[client])), set); + if (scheduler) { + if ((task = ConnectClient_get_task(ServerRealm_get_clientsTable(ptr)[client]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(ServerRealm_get_clientsTable(ptr)[client], NULL); + } + } + SSL_clear(SslFd_get_ssl(ConnectClient_get_sslFd(ServerRealm_get_clientsTable(ptr)[client]))); + ConnectClient_set_state(ServerRealm_get_clientsTable(ptr)[client], CONNECTCLIENT_STATE_FREE); + ServerRealm_decrease_connectedClients(ptr); +} + +/* + * Function name: remove_raclient + * Description: Removes the remote admin client. + * Arguments: ptr - the server realm + * client - the client number + * set - the set of file descriptors for reading + * wset - the set of file descriptors for writing + * scheduler - the task scheduler + */ + +void +remove_raclient(ServerRealm* ptr, int client, fd_set* set, fd_set* wset, TaskScheduler* scheduler) +{ + int i; + Task* task; + + assert(ptr != NULL); + assert(client >= 0); + assert(set != NULL); + assert(wset != NULL); + + for (i = 0; i < ConnectClient_get_limit(ServerRealm_get_raClientsTable(ptr)[client]); ++i) { + ConnectClient_get_users(ServerRealm_get_raClientsTable(ptr)[client])[i] = -1; + } + ConnectClient_set_sClientId(ServerRealm_get_raClientsTable(ptr)[client], NULL); + ConnectClient_set_connected(ServerRealm_get_raClientsTable(ptr)[client], 0); + close(SslFd_get_fd(ConnectClient_get_sslFd(ServerRealm_get_raClientsTable(ptr)[client]))); + FD_CLR(SslFd_get_fd(ConnectClient_get_sslFd(ServerRealm_get_raClientsTable(ptr)[client])), set); + if (scheduler) { + if ((task = ConnectClient_get_task(ServerRealm_get_raClientsTable(ptr)[client]))) { + TaskScheduler_removeTask(scheduler, task); + ConnectClient_set_task(ServerRealm_get_raClientsTable(ptr)[client], NULL); + } + } + SSL_clear(SslFd_get_ssl(ConnectClient_get_sslFd(ServerRealm_get_raClientsTable(ptr)[client]))); + ServerRealm_decrease_connectedClients(ptr); + if (ConnectClient_get_state(ServerRealm_get_raClientsTable(ptr)[client]) == CONNECTCLIENT_STATE_ACCEPTED) { + ServerRealm_decrease_connectedRaClients(ptr); + } + ConnectClient_set_state(ServerRealm_get_raClientsTable(ptr)[client], CONNECTCLIENT_STATE_FREE); +} diff --git a/src/server_remove.h b/src/server_remove.h new file mode 100644 index 0000000..65d4f99 --- /dev/null +++ b/src/server_remove.h @@ -0,0 +1,31 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "file.h" +#include "task_scheduler_struct.h" + +#ifndef _JS_SERVER_REMOVE_H +#define _JS_SERVER_REMOVE_H + +void remove_client(ServerRealm*, int, fd_set*, fd_set*, TaskScheduler* scheduler); +void remove_raclient(ServerRealm*, int, fd_set*, fd_set*, TaskScheduler* scheduler); + +#endif + diff --git a/src/server_set.c b/src/server_set.c new file mode 100644 index 0000000..07fa069 --- /dev/null +++ b/src/server_set.c @@ -0,0 +1,48 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <stdlib.h> +#include <assert.h> + +#include "string_functions.h" + +/* + * Function name: set_value + * Description: If the variable has no value, set it from the given string. + * If the given string is NULL, use default value. + * Arguments: dest - the destination variable + * from - the given string + * def - the default value + */ + +void +set_value(char** dest, char* from, char* def) +{ + assert(dest != NULL); + + if ((*dest) == NULL) { + if (from != NULL) { + string_cp(dest, from); + } + else { + (*dest) = def; + } + } +} diff --git a/src/server_set.h b/src/server_set.h new file mode 100644 index 0000000..7d74de9 --- /dev/null +++ b/src/server_set.h @@ -0,0 +1,27 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_SERVER_SET_H +#define _JS_SERVER_SET_H + +void set_value(char** dest, char* from, char* def); + +#endif + diff --git a/src/server_signals.c b/src/server_signals.c new file mode 100644 index 0000000..00f69bd --- /dev/null +++ b/src/server_signals.c @@ -0,0 +1,86 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "server_signals.h" +#include "activefor.h" +#include "thread_management.h" +#include "http_proxy_functions.h" +#include "stats.h" +#include "logging.h" +#include "server_configuration_struct.h" + +extern ServerConfiguration* config; + +/* + * Function name: server_sig_int + * Description: Function responsible for handling SIG_INT. + * Arguments: signo - the signal number + */ + +void +server_sig_int(int signo) +{ + int i, j; + unsigned char buff[5]; + ServerRealm** scRealmsTable; + +#ifdef HAVE_LIBPTHREAD + if (!is_this_a_mainthread()) { + return; + } +#endif + + for (j = 0; j < ServerConfiguration_get_realmsNumber(config); ++j) { + scRealmsTable = ServerConfiguration_get_realmsTable(config); + buff[0] = AF_S_CLOSING; /* closing */ + for (i = 0; i < ServerRealm_get_clientsLimit(scRealmsTable[j]); ++i) { + if (ConnectClient_get_state(ServerRealm_get_clientsTable(scRealmsTable[j])[i]) == + CONNECTCLIENT_STATE_ACCEPTED) { + SslFd_send_message(ServerRealm_get_realmType(scRealmsTable[j]), + ConnectClient_get_sslFd( + ServerRealm_get_clientsTable(scRealmsTable[j])[i]), + buff, 5); + close(SslFd_get_fd(ConnectClient_get_sslFd( + ServerRealm_get_clientsTable(scRealmsTable[j])[i]))); + } + } + for (i = 0; i < ServerRealm_get_raClientsLimit(scRealmsTable[j]); ++i) { + if (ConnectClient_get_state(ServerRealm_get_raClientsTable(scRealmsTable[j])[i]) == + CONNECTCLIENT_STATE_ACCEPTED) { + SslFd_send_message(ServerRealm_get_realmType(scRealmsTable[j]) | TYPE_SSL, + ConnectClient_get_sslFd( + ServerRealm_get_raClientsTable(scRealmsTable[j])[i]), + buff, 5); + close(SslFd_get_fd(ConnectClient_get_sslFd(ServerRealm_get_raClientsTable(scRealmsTable[j])[i]))); + } + } + + } + + /* FIXME: give a time to close all connections */ + mysleep(0.1); + + aflog(LOG_T_MAIN, LOG_I_NOTICE, + "SERVER CLOSED cg: %ld bytes", getcg()); + exit(0); +} + diff --git a/src/server_signals.h b/src/server_signals.h new file mode 100644 index 0000000..7a55a1c --- /dev/null +++ b/src/server_signals.h @@ -0,0 +1,27 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_SERVER_SIGNALS_H +#define _JS_SERVER_SIGNALS_H + +void server_sig_int(int); /* INT signal handler for the afserver */ + +#endif + diff --git a/src/ssl_fd_struct.c b/src/ssl_fd_struct.c new file mode 100644 index 0000000..056f089 --- /dev/null +++ b/src/ssl_fd_struct.c @@ -0,0 +1,329 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <zlib.h> +#include <assert.h> + +#include "activefor.h" +#include "stats.h" +#include "logging.h" +#include "ssl_fd_struct.h" + +/* + * Function name: SslFd_new + * Description: Create and initialize new SslFd structure. + * Returns: Pointer to newly created SslFd structure. + */ + +SslFd* +SslFd_new() +{ + SslFd* tmp = calloc(1, sizeof(SslFd)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: SslFd_free + * Description: Free the memory allocated for SslFd structure. + * Arguments: sf - pointer to pointer to SslFd structure + */ + +void +SslFd_free(SslFd** sf) +{ + assert(sf != NULL); + if (sf == NULL) { + return; + } + assert((*sf) != NULL); + if ((*sf) == NULL) { + return; + } + if ((*sf)->ssl) { + SSL_free((*sf)->ssl); + (*sf)->ssl = NULL; + } + free((*sf)); + (*sf) = NULL; +} + +/* + * Function name: SslFd_set_fd + * Description: Set file descriptor of the used socket. + * Arguments: sf - pointer to SslFd structure + * fd - file descriptor of the used socket + */ + +void +SslFd_set_fd(SslFd* sf, int fd) +{ + assert(sf != NULL); + if (sf == NULL) { + return; + } + sf->fd = fd; +} + +/* + * Function name: SslFd_set_ssl_general + * Description: Set ssl object for the used socket. Free previous ssl object if 'free' argument is not 0. + * Arguments: sf - pointer to SslFd structure + * fd - ssl object for the used socket + * free - free previous ssl object + */ + +void +SslFd_set_ssl_general(SslFd* sf, SSL* ssl, int free) +{ + assert(sf != NULL); + if (sf == NULL) { + return; + } + if ((free) && (sf->ssl)) { + SSL_free(sf->ssl); + } + sf->ssl = ssl; +} + + +/* + * Function name: SslFd_set_ssl + * Description: Set ssl object for the used socket. + * Arguments: sf - pointer to SslFd structure + * fd - ssl object for the used socket + */ + +void +SslFd_set_ssl(SslFd* sf, SSL* ssl) +{ + SslFd_set_ssl_general(sf, ssl, 1); +} + +/* + * Function name: SslFd_set_ssl_nf + * Description: Set ssl object for the used socket. Don't free previous ssl object + * Arguments: sf - pointer to SslFd structure + * fd - ssl object for the used socket + */ + +void +SslFd_set_ssl_nf(SslFd* sf, SSL* ssl) +{ + SslFd_set_ssl_general(sf, ssl, 0); +} + +/* + * Function name: SslFd_set_ssl + * Description: Get file descriptor of the used socket. + * Arguments: sf - pointer to SslFd structure + * Returns: File descriptor of the used socket. + */ + +int +SslFd_get_fd(SslFd* sf) +{ + assert(sf != NULL); + if (sf == NULL) { + return -1; + } + return sf->fd; +} + +/* + * Function name: SslFd_get_ssl + * Description: Get ssl object for the used socket. + * Arguments: sf - pointer to SslFd structure + * Returns: Ssl object for the used socket. + */ + +SSL* +SslFd_get_ssl(SslFd* sf) +{ + assert(sf != NULL); + if (sf == NULL) { + return NULL; + } + return sf->ssl; +} + +/* + * Function name: SslFd_send_message + * Description: Send message from 'buf' of the length 'amount' to the socket + * encapsulated in SslFd structure. 'type' is used to keep + * information about ip family, using of ssl, using of zlib and more. + * Arguments: type - type of the connection + * sf - pointer to SslFd structure + * buf - buffer which keeps data to send + * amount - amount of data to send + * Returns: Amount of bytes written or -1, if some error occured. + */ + +int +SslFd_send_message(char type, SslFd* sf, unsigned char* buf, int amount) +{ + unsigned long clen; + int length; + static unsigned char buffer[9000]; + + assert(sf != NULL); + assert(buf != NULL); + + if ((sf == NULL) || (buf == NULL)) { + return -1; + } + + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "send_message: ssl:%s zlib:%s length:%d", (TYPE_IS_SSL(type))?"yes":"no", + (TYPE_IS_ZLIB(type))?"yes":"no", amount); + clen = 8995; + length = amount - 5; + if (TYPE_IS_ZLIB(type)) { + memcpy(buffer, buf, 5); + if (amount > 5) { + compress(&buffer[5], &clen, &buf[5], length); + if (clen < length) { + length = clen; + TYPE_SET_COMP(length); + buffer[3] = length >> 8; /* high bits of message length */ + buffer[4] = length; /* low bits of message length */ + addtocg(amount-5 - clen); + } + } + if (TYPE_IS_SSL(type)) { + if (TYPE_IS_COMP(length)) { + return SSL_writen(sf->ssl, buffer, clen+5); + } + else { + return SSL_writen(sf->ssl, buf, amount); + } + } + else { + if (TYPE_IS_COMP(length)) { + return writen(sf->fd, buffer, clen+5); + } + else { + return writen(sf->fd, buf, amount); + } + } + } + else { + if (TYPE_IS_SSL(type)) { + return SSL_writen(sf->ssl, buf, amount); + } + else { + return writen(sf->fd, buf, amount); + } + } +} + +/* + * Function name: SslFd_get_message + * Description: Get message from the socket encapsulated in SslFd structure + * and write it to the 'buf'. Message is 'amount' butes long. + * 'type' is used to keep information about ip family, using of + * ssl, using of zlib and more. + * Arguments: type - type of the connection + * sf - pointer to SslFd structure + * buf - buffer which will keep received data + * amount - length of the message to receive + * Returns: Amount of bytes received or -1, if some error occured. + */ + +int +SslFd_get_message(char type, SslFd* sf, unsigned char* buf, int amount) +{ + int length; + unsigned long elen; + static unsigned char bufor[9000]; + + assert(sf != NULL); + assert(buf != NULL); + + if ((sf == NULL) || (buf == NULL)) { + return -1; + } + aflog(LOG_T_MAIN, LOG_I_DEBUG, + "get_message: ssl:%s zlib:%s length:%d", (TYPE_IS_SSL(type))?"yes":"no", + (TYPE_IS_ZLIB(type))?"yes":"no", amount); + if (amount < 0) { + if (TYPE_IS_SSL(type)) { + return SSL_read(sf->ssl, buf, -amount); + } + else { + return read(sf->fd, buf, -amount); + } + } + if (TYPE_IS_ZLIB(type)) { + if (TYPE_IS_SSL(type)) { + length = SSL_readn(sf->ssl, bufor, amount&0xBFFF); + } + else { + length = readn(sf->fd, bufor, amount&0xBFFF); + } + if (length <= 0) return length; + elen = 8096; + if (TYPE_IS_COMP(amount)) { + uncompress(buf, &elen, bufor, length); + } + else { + memcpy(buf, bufor, length); + elen = length; + } + return elen; + } + else + { + if (TYPE_IS_SSL(type)) { + return SSL_readn(sf->ssl, buf, amount); + } + else { + return readn(sf->fd, buf, amount); + } + } +} + +/* + * Function name: SslFd_swap_content + * Description: Swap the content of two SslFd structures. + * Arguments: sf1 - first pointer to SslFd structure + * sf2 - second pointer to SslFd structure + */ + +void +SslFd_swap_content(SslFd* sf1, SslFd* sf2) +{ + int tmpfd; + SSL* tmpssl; + + assert(sf1 != NULL); + assert(sf2 != NULL); + + tmpfd = SslFd_get_fd(sf1); + tmpssl = SslFd_get_ssl(sf2); + SslFd_set_fd(sf1, SslFd_get_fd(sf2)); + SslFd_set_ssl(sf1, SslFd_get_ssl(sf2)); + SslFd_set_fd(sf2, tmpfd); + SslFd_set_ssl(sf2, tmpssl); +} diff --git a/src/ssl_fd_struct.h b/src/ssl_fd_struct.h new file mode 100644 index 0000000..da3cc3f --- /dev/null +++ b/src/ssl_fd_struct.h @@ -0,0 +1,48 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_SSL_FD_STRUCT_H +#define _JS_SSL_FD_STRUCT_H + +#include <openssl/ssl.h> + +typedef struct { + int fd; + SSL* ssl; +} SslFd; + +/* 'constructor' */ +SslFd* SslFd_new(); +/* 'destructor' */ +void SslFd_free(SslFd** sf); +/* setters */ +void SslFd_set_fd(SslFd* sf, int fd); +void SslFd_set_ssl(SslFd* sf, SSL* ssl); +void SslFd_set_ssl_nf(SslFd* sf, SSL* ssl); +/* getters */ +int SslFd_get_fd(SslFd* sf); +SSL* SslFd_get_ssl(SslFd* sf); +/* other */ +int SslFd_send_message(char type, SslFd* sf, unsigned char* buf, int amount); +int SslFd_get_message(char type, SslFd* sf, unsigned char* buf, int amount); +void SslFd_swap_content(SslFd* sf1, SslFd* sf2); + +#endif diff --git a/src/ssl_routines.c b/src/ssl_routines.c new file mode 100644 index 0000000..7275e92 --- /dev/null +++ b/src/ssl_routines.c @@ -0,0 +1,108 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "ssl_routines.h" + +/* + * Function name: check_public_key + * Description: Checks if the public key is trusted. + * Arguments: filename - the name of the file with stored keys + * hostname - the name of the host + * keyhash - the hash of the key + * Returns: The result of the check. + */ + +int +check_public_key(char* filename, char* hostname, char* keyhash) +{ + FILE* storefile; + char buff[256]; + int lspaceind, i; + + assert(filename != NULL); + assert(hostname != NULL); + assert(keyhash != NULL); + + memset(buff, 0, 256); + + storefile = fopen(filename, "r"); + if (storefile == NULL) { + return SSL_PUBLIC_KEY_NOT_KNOWN; + } + + while (fgets(buff, 256, storefile) != NULL) { + lspaceind = -1; + for (i = 0; i < 256; ++i) { + if (buff[i] == 0) { + break; + } + if (buff[i] == ' ') { + lspaceind = i; + } + } + if (lspaceind == -1) { + continue; + } + if (buff[strlen(buff)-1] == '\n') { + buff[strlen(buff)-1] = 0; + } + buff[lspaceind] = 0; + if (strcmp(buff, hostname) == 0) { + if (strcmp(&buff[lspaceind+1], keyhash) == 0) { + return SSL_PUBLIC_KEY_VALID; + } + else { + return SSL_PUBLIC_KEY_INVALID; + } + } + } + return SSL_PUBLIC_KEY_NOT_KNOWN; +} + +/* + * Function name: add_public_key + * Description: Adds the key to the store file. + * Arguments: filename - the name of the file with stored keys + * hostname - the name of the host + * keyhash - the hash of the key + */ + +void +add_public_key(char* filename, char* hostname, char* keyhash) +{ + FILE* storefile; + + assert(filename != NULL); + assert(hostname != NULL); + assert(keyhash != NULL); + + storefile = fopen(filename, "a"); + if (storefile == NULL) { + return; + } + fprintf(storefile, "%s %s\n", hostname, keyhash); + fclose(storefile); +} diff --git a/src/ssl_routines.h b/src/ssl_routines.h new file mode 100644 index 0000000..77a2fff --- /dev/null +++ b/src/ssl_routines.h @@ -0,0 +1,34 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#define SSL_PUBLIC_KEY_INVALID 0 +#define SSL_PUBLIC_KEY_VALID 1 +#define SSL_PUBLIC_KEY_NOT_KNOWN 2 + +#ifndef _JS_SSL_ROUTINES_H +#define _JS_SSL_ROUTINES_H + +/* check if hostname and keyhash is known */ +int check_public_key(char* filename, char* hostname, char* keyhash); +/* add hostname and keyhash to known_hosts file */ +void add_public_key(char* filename, char* hostname, char* keyhash); + +#endif + diff --git a/src/stats.c b/src/stats.c new file mode 100644 index 0000000..91f2611 --- /dev/null +++ b/src/stats.c @@ -0,0 +1,87 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "stats.h" + +static signed long compressgained; + +/* + * Function name: timeperiod + * Description: Returns the formatted time period string. + * Arguments: period - the time period + * Returns: The formatted time period string. + */ + +char* +timeperiod(time_t period) +{ + int hours, minutes, seconds; + static char timeper[41]; + memset(timeper, 0, 41); + + hours = period/3600; + minutes = (period/60)%60; + seconds = period%60; + + if (hours) { + sprintf(timeper, "%d:%02d:%02d", hours, minutes, seconds); + } + else { + sprintf(timeper, "%d:%02d", minutes, seconds); + } + return timeper; +} + +/* + * Function name: addtocg + * Description: Adds the given number to the bytes gained by the use of compression. + * Arguments: amount - the number to add + */ + +void +addtocg(int amount) +{ + compressgained += amount; +} + +/* + * Function name: getcg + * Description: Returns the number of bytes gained by the use of compression. + * Returns: The number of bytes gained by the use of compression. + */ + +signed long +getcg(void) +{ + return compressgained; +} + +/* + * Function name: resetcg + * Description: Resets the counter of bytes gained by the use of compression. + */ + +void +resetcg(void) +{ + compressgained = 0; +} diff --git a/src/stats.h b/src/stats.h new file mode 100644 index 0000000..009b047 --- /dev/null +++ b/src/stats.h @@ -0,0 +1,38 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <time.h> +#include <string.h> +#include <stdio.h> + +#ifndef _JS_STATS_H +#define _JS_STATS_H + + /* return time period description */ +char* timeperiod(time_t period); + /* add amount to compressgained value */ +void addtocg(int amount); + /* reset the compressgained value */ +void resetcg(void); + /* returns the compressgained value */ +signed long getcg(void); + +#endif + diff --git a/src/string_functions.c b/src/string_functions.c new file mode 100644 index 0000000..bcf42ae --- /dev/null +++ b/src/string_functions.c @@ -0,0 +1,72 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <stdlib.h> +#include <string.h> + +#include "string_functions.h" + +/* + * Function name: string_cp + * Description: Firstly, the memory allocated for *dest is released. After this, new memory is allocated + * and string from src is copied to newly created location. *dest is pointing to new string. + * Arguments: dest - pointer to pointer to string previously allocated by malloc family functions. + * If dest is NULL, memory will be allocated and returned from the function. In the + * latter case dest will be unchanged + * src - string containing data for copying. If src is NULL, new memory is not allocated, but + * the old one is still released. + * Returns: The newly allocated string. + */ + +char* +string_cp(char** dest, char* src) +{ + char* tmp; + int len = 0; + + /* 1. releasing memory allocated by *dest */ + if (dest != NULL) { + if ((*dest) != NULL) { + /* if *dest points to the same memory as src - we shouldn't do anything */ + if ((*dest) == src) { + return (*dest); + } + free((*dest)); + (*dest) = NULL; + } + } + /* if src is null, there is nothing more to do */ + if (src == NULL) { + return NULL; + } + /* 2. allocating new memory */ + len = strlen(src); + tmp = calloc(1, len + 1); + if (tmp == NULL) { + return NULL; + } + /* 3. copying data from src */ + strncpy(tmp, src, len); + if (dest != NULL) { + (*dest) = tmp; + } + return tmp; +} diff --git a/src/string_functions.h b/src/string_functions.h new file mode 100644 index 0000000..914935c --- /dev/null +++ b/src/string_functions.h @@ -0,0 +1,27 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_STRING_FUNCTIONS_H +#define _JS_STRING_FUNCTIONS_H + +char* string_cp(char** dest, char* src); + +#endif + diff --git a/src/task_list_node_struct.c b/src/task_list_node_struct.c new file mode 100644 index 0000000..eb80369 --- /dev/null +++ b/src/task_list_node_struct.c @@ -0,0 +1,124 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "task_list_node_struct.h" + +/* + * Function name: TaskListNode_new + * Description: Creates and initializes new task list node. The task must point + * at previously allocated Task structure. + * Arguments: task - pointer to Task structure, which must be previously initialized + * Returns: Pointer to newly created TaskListNode structure. + */ + +TaskListNode* +TaskListNode_new(Task* task) +{ + TaskListNode* tmp = calloc(1, sizeof(TaskListNode)); + assert(task != NULL); + if (task == NULL) { + return NULL; + } + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->task = task; + + return tmp; +} + +/* + * Function name: TaskListNode_free + * Description: Frees the memory allocated for TaskListNode structure. + * Arguments: node - pointer to pointer to TaskListNode structure + */ + +void +TaskListNode_free(TaskListNode** node) +{ + assert(node != NULL); + if (node == NULL) { + return; + } + assert((*node) != NULL); + if ((*node) == NULL) { + return; + } + + free((*node)); + (*node) = NULL; +} + +/* + * Function name: TaskListNode_set_next + * Description: Sets the next pointer of the task list node. + * Arguments: node - pointer to TaskListNode structure + * next - the new next pointer + */ + +void +TaskListNode_set_next(TaskListNode* node, TaskListNode* next) +{ + assert(node != NULL); + if (node == NULL) { + return; + } + node->next = next; +} + +/* + * Function name: TaskListNode_set_previous + * Description: Sets the previous pointer of the task list node. + * Arguments: node - pointer to TaskListNode structure + * next - the new previous pointer + */ + +void +TaskListNode_set_previous(TaskListNode* node, TaskListNode* previous) +{ + assert(node != NULL); + if (node == NULL) { + return; + } + node->previous = previous; +} + +/* + * Function name: TaskListNode_get_task + * Description: Returns the task contained in this node. + * Arguments: node - pointer to TaskListNode structure + * Returns: The task contained in this node. + */ + +Task* +TaskListNode_get_task(TaskListNode* node) +{ + assert(node != NULL); + if (node == NULL) { + return NULL; + } + return node->task; +} diff --git a/src/task_list_node_struct.h b/src/task_list_node_struct.h new file mode 100644 index 0000000..4588f13 --- /dev/null +++ b/src/task_list_node_struct.h @@ -0,0 +1,42 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_TASK_LIST_NODE_STRUCT_H +#define _JS_TASK_LIST_NODE_STRUCT_H + +#include "task_struct.h" + +typedef struct tlnode{ + Task* task; + struct tlnode* previous; + struct tlnode* next; +} TaskListNode; + +/* 'constructor' */ +TaskListNode* TaskListNode_new(Task* task); +/* 'destructor' */ +void TaskListNode_free(TaskListNode** node); +/* setters */ +void TaskListNode_set_next(TaskListNode* node, TaskListNode* next); +void TaskListNode_set_previous(TaskListNode* node, TaskListNode* previous); +/* getters */ +Task* TaskListNode_get_task(TaskListNode* node); + +#endif diff --git a/src/task_scheduler_struct.c b/src/task_scheduler_struct.c new file mode 100644 index 0000000..99b22bb --- /dev/null +++ b/src/task_scheduler_struct.c @@ -0,0 +1,321 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "timeval_functions.h" +#include "task_scheduler_struct.h" + +/* + * Function name: TaskScheduler_new + * Description: Creates and initializes task scheduler. + * Returns: Pointer to newly created TaskScheduler structure. + */ + +TaskScheduler* +TaskScheduler_new() +{ + TaskScheduler* tmp = calloc(1, sizeof(TaskScheduler)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + + return tmp; +} + +/* + * Function name: TaskScheduler_free + * Description: Frees the memory allocated for TaskScheduler structure. + * Arguments: scheduler - pointer to pointer to TaskScheduler structure + */ + +void +TaskScheduler_free(TaskScheduler** scheduler) +{ + assert(scheduler != NULL); + if (scheduler == NULL) { + return; + } + assert((*scheduler) != NULL); + if ((*scheduler) == NULL) { + return; + } + + while ((*scheduler)->head) { + TaskScheduler_removeTask((*scheduler), TaskListNode_get_task((*scheduler)->head)); + } + + free((*scheduler)); + (*scheduler) = NULL; +} + +/* + * Function name: TaskScheduler_get_actualTimer + * Description: Returns the smallest timeval structure in the scheduler. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: The smallest timeval structure in the scheduler. + */ + +struct timeval* +TaskScheduler_get_actualTimer(TaskScheduler* scheduler) +{ + assert(scheduler != NULL); + if (scheduler == NULL) { + return NULL; + } + return Task_get_timer(TaskListNode_get_task(scheduler->actualTask)); +} + +/* + * Function name: TaskScheduler_hasMoreTasks + * Description: Checks if there is more tasks in the scheduler. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: 0 - there is no more tasks in the scheduler, + * n>0 - there is more (n) tasks in the scheduler. + */ + +int +TaskScheduler_hasMoreTasks(TaskScheduler* scheduler) +{ + assert(scheduler != NULL); + if (scheduler == NULL) { + return 0; + } + return scheduler->numberOfTasks; +} + +/* + * Function name: TaskScheduler_addTask + * Description: Adds the task to the scheduler. + * Arguments: scheduler - pointer to TaskScheduler structure + * task - the task to add to the scheduler + * Returns: 0 - the task has been added successfully, + * 1 - the task has NOT been added. + */ + +int +TaskScheduler_addTask(TaskScheduler* scheduler, Task* task) +{ + TaskListNode* tmp; + assert(scheduler != NULL); + if (scheduler == NULL) { + return 1; + } + assert(task != NULL); + if (task == NULL) { + return 1; + } + tmp = TaskListNode_new(task); + assert(tmp != NULL); + if (tmp == NULL) { + return 1; + } + if (scheduler->head) { + TaskListNode_set_next(tmp, scheduler->head); + TaskListNode_set_previous(scheduler->head, tmp); + } + scheduler->head = tmp; + scheduler->numberOfTasks += 1; + if (scheduler->actualTask) { + if (timeval_compare(TaskScheduler_get_actualTimer(scheduler), Task_get_timer(task)) > 0) { + scheduler->actualTask = tmp; + } + } + else { + scheduler->actualTask = tmp; + } + return 0; +} + +/* + * Function name: find_tasknode_with_minimal_timer + * Description: Finds the task list node with minimal timer. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: The task list node with minimal timer. + */ +static TaskListNode* +find_tasknode_with_minimal_timer(TaskScheduler* scheduler) +{ + TaskListNode* iterator; + TaskListNode* candidate; + assert(scheduler != NULL); + if (scheduler == NULL) { + return NULL; + } + if (scheduler->head == NULL) { + return NULL; + } + candidate = scheduler->head; + iterator = scheduler->head; + iterator = iterator->next; + while (iterator) { + if (timeval_compare(Task_get_timer(TaskListNode_get_task(iterator)), + Task_get_timer(TaskListNode_get_task(candidate))) == -1) { + candidate = iterator; + } + iterator = iterator->next; + } + return candidate; +} + +/* + * Function name: TaskScheduler_removeTask + * Description: Removes the task from the scheduler. + * Arguments: scheduler - pointer to TaskScheduler structure + * task - the task to remove from the scheduler + * Returns: 0 - the task has been removed successfully, + * 1 - the task has NOT been removed (probably there was no such task in the scheduler). + */ + +int +TaskScheduler_removeTask(TaskScheduler* scheduler, Task* task) +{ + TaskListNode* iterator; + Task* tmp; + assert(scheduler != NULL); + if (scheduler == NULL) { + return 1; + } + assert(task != NULL); + if (task == NULL) { + return 1; + } + iterator = scheduler->head; + while (iterator) { + tmp = TaskListNode_get_task(iterator); + if (tmp == task) { + if (iterator->previous) { + TaskListNode_set_next(iterator->previous, iterator->next); + } + if (iterator->next) { + TaskListNode_set_previous(iterator->next, iterator->previous); + } + if (iterator == scheduler->head) { + scheduler->head = iterator->next; + } + if (iterator == scheduler->actualTask) { + scheduler->actualTask = find_tasknode_with_minimal_timer(scheduler); + } + scheduler->numberOfTasks -= 1; + TaskListNode_free(&iterator); + return 0; + } + iterator = iterator->next; + } + return 1; +} + +/* + * Function name: TaskScheduler_startWatching + * Description: Starts counting the time for the actual timer. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: 0 - success, + * 1 - failure. + */ + +int +TaskScheduler_startWatching(TaskScheduler* scheduler) +{ + struct timeval* tmp; + assert(scheduler != NULL); + if (scheduler == NULL) { + return 1; + } + tmp = TaskScheduler_get_actualTimer(scheduler); + assert(tmp != NULL); + if (tmp == NULL) { + return 1; + } + scheduler->delta = *tmp; + return 0; +} + +/* + * Function name: TaskScheduler_stopWatching + * Description: Stops counting the time for the actual timer. + * Updates all the timers and destroys them if needed. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: 0 - success, + * 1 - failure. + */ + +int +TaskScheduler_stopWatching(TaskScheduler* scheduler) +{ + TaskListNode* iterator; + TaskListNode* actualTask; + Task* backup; + struct timeval* tmp; + int result; + assert(scheduler != NULL); + if (scheduler == NULL) { + return 1; + } + tmp = TaskScheduler_get_actualTimer(scheduler); + assert(tmp != NULL); + if (tmp == NULL) { + return 1; + } + if (timeval_subtract(&(scheduler->delta), tmp)) { + return 1; + } + actualTask = scheduler->actualTask; + assert(scheduler->actualTask != NULL); + iterator = scheduler->head; + while (iterator) { + if (iterator != actualTask) { + result = timeval_subtract(Task_get_timer(TaskListNode_get_task(iterator)), &(scheduler->delta)); + assert(result == 0); + } + if (timeval_lq_zero(Task_get_timer(TaskListNode_get_task(iterator)))) { + Task_exec(TaskListNode_get_task(iterator)); + backup = TaskListNode_get_task(iterator); + iterator = iterator->next; + TaskScheduler_removeTask(scheduler, backup); + continue; + } + iterator = iterator->next; + } + TaskScheduler_update(scheduler); + return 0; +} + +/* + * Function name: TaskScheduler_update + * Description: Updates the actual timer. + * Arguments: scheduler - pointer to TaskScheduler structure + * Returns: 0 - success, + * 1 - failure. + */ + +int +TaskScheduler_update(TaskScheduler* scheduler) +{ + assert(scheduler != NULL); + if (scheduler == NULL) { + return 1; + } + scheduler->actualTask = find_tasknode_with_minimal_timer(scheduler); + return 0; +} diff --git a/src/task_scheduler_struct.h b/src/task_scheduler_struct.h new file mode 100644 index 0000000..d62405a --- /dev/null +++ b/src/task_scheduler_struct.h @@ -0,0 +1,47 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_TASK_SCHEDULER_STRUCT_H +#define _JS_TASK_SCHEDULER_STRUCT_H + +#include "task_list_node_struct.h" + +typedef struct { + TaskListNode* head; + int numberOfTasks; + TaskListNode* actualTask; + struct timeval delta; +} TaskScheduler; + +/* 'constructor' */ +TaskScheduler* TaskScheduler_new(); +/* 'destructor' */ +void TaskScheduler_free(TaskScheduler** scheduler); +/* getters */ +struct timeval* TaskScheduler_get_actualTimer(TaskScheduler* scheduler); +/* other */ +int TaskScheduler_hasMoreTasks(TaskScheduler* scheduler); +int TaskScheduler_addTask(TaskScheduler* scheduler, Task* task); +int TaskScheduler_removeTask(TaskScheduler* scheduler, Task* task); +int TaskScheduler_startWatching(TaskScheduler* scheduler); +int TaskScheduler_stopWatching(TaskScheduler* scheduler); +int TaskScheduler_update(TaskScheduler* scheduler); + +#endif diff --git a/src/task_struct.c b/src/task_struct.c new file mode 100644 index 0000000..283bbe8 --- /dev/null +++ b/src/task_struct.c @@ -0,0 +1,122 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "task_struct.h" + +/* + * Function name: Task_new + * Description: Creates and initializes new task. User is responsible for + * allocating/freeing memory pointed by the pointers. + * Arguments: timerp - pointer to timeval structure used to counte time (required) + * function - pointer to function executed when the time is out (optional) + * data - pointer to data passed to function executed when the time is out (optional) + * clean - pointer to function that frees the data + * Returns: Pointer to newly created Task structure. + */ + +Task* +Task_new(struct timeval* timerp, void (*function)(void*), void* data, void (*clean)(void**)) +{ + Task* tmp; + assert(timerp != NULL); + if (timerp == NULL) { + return NULL; + } + tmp = calloc(1, sizeof(Task)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + tmp->timerp = timerp; + tmp->function = function; + tmp->data = data; + tmp->clean = clean; + + return tmp; +} + +/* + * Function name: Task_free + * Description: Frees the memory allocated for Task structure. User has to free the memory at the + * pointers by his own. + * Arguments: task - pointer to pointer to Task structure + */ + +void +Task_free(Task** task) +{ + assert(task != NULL); + if (task == NULL) { + return; + } + assert((*task) != NULL); + if ((*task) == NULL) { + return; + } + + if ((*task)->clean) { + if ((*task)->data) { + (*task)->clean(&((*task)->data)); + } + } + + free((*task)); + (*task) = NULL; +} + +/* + * Function name: Task_get_timer + * Description: Returns the timer of the task. + * Arguments: task - pointer to Task structure + * Returns: The timer of the task. + */ + +struct timeval* +Task_get_timer(Task* task) +{ + assert(task != NULL); + if (task == NULL) { + return NULL; + } + return task->timerp; +} + +/* + * Function name: Task_exec + * Description: Executes the function encapsulated in the task. + * Arguments: task - pointer to Task structure + */ + +void +Task_exec(Task* task) +{ + assert(task != NULL); + if (task == NULL) { + return; + } + if (task->function) { + task->function(task->data); + } +} diff --git a/src/task_struct.h b/src/task_struct.h new file mode 100644 index 0000000..fac4582 --- /dev/null +++ b/src/task_struct.h @@ -0,0 +1,39 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_TASK_STRUCT_H +#define _JS_TASK_STRUCT_H + +typedef struct { + struct timeval* timerp; + void (*function)(void*); + void* data; + void (*clean)(void**); +} Task; + +/* 'constructor' */ +Task* Task_new(struct timeval*, void (*function)(void*), void*, void (*clean)(void**)); +/* 'destructor' */ +void Task_free(Task** task); +/* getters */ +struct timeval* Task_get_timer(Task* task); +void Task_exec(Task* task); + +#endif diff --git a/src/thread_management.c b/src/thread_management.c new file mode 100644 index 0000000..d423ca6 --- /dev/null +++ b/src/thread_management.c @@ -0,0 +1,102 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include "thread_management.h" + +#ifdef HAVE_LIBPTHREAD + +static pthread_t mainthread; +static pthread_mutex_t mainmutex = PTHREAD_MUTEX_INITIALIZER; +static pthread_cond_t maincond = PTHREAD_COND_INITIALIZER; + +/* + * Function name: remember_mainthread + * Description: Remembers the current thread as a main thread. + */ + +void +remember_mainthread(void) +{ + mainthread = pthread_self(); +} + +/* + * Function name: is_this_a_mainthread + * Description: Checks, if the current thread is a main thread. + * Returns: 0 - this is not a main thread, + * 1 - this is a main thread. + */ + +int +is_this_a_mainthread(void) +{ + if (pthread_self() == mainthread) { + return 1; + } + return 0; +} + +/* + * Function name: start_critical_section + * Description: Starts the critical section of the code by locking the mutex. + */ + +void +start_critical_section(void) +{ + pthread_mutex_lock( &mainmutex); +} + +/* + * Function name: end_critical_section + * Description: Ends the critical section of the code by unlocking the mutex. + */ + +void +end_critical_section(void) +{ + pthread_mutex_unlock( &mainmutex); +} + +/* + * Function name: wait_for_condition + * Description: Starts waiting for the condition. + */ + +void +wait_for_condition(void) +{ + pthread_cond_wait(&maincond, &mainmutex); +} + +/* + * Function name: broadcast_condition + * Description: Broadcast the met of the condition. + */ + +void +broadcast_condition(void) +{ + pthread_cond_broadcast(&maincond); +} + +#endif diff --git a/src/thread_management.h b/src/thread_management.h new file mode 100644 index 0000000..9ea87fb --- /dev/null +++ b/src/thread_management.h @@ -0,0 +1,34 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_THREAD_MANAGEMENT_H +#define _JS_THREAD_MANAGEMENT_H + +#include <pthread.h> + +void remember_mainthread(void); +int is_this_a_mainthread(void); +void start_critical_section(void); +void end_critical_section(void); +void wait_for_condition(void); +void broadcast_condition(void); + +#endif + diff --git a/src/timeval_functions.c b/src/timeval_functions.c new file mode 100644 index 0000000..122e03a --- /dev/null +++ b/src/timeval_functions.c @@ -0,0 +1,134 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <assert.h> + +#include "timeval_functions.h" + +/* + * Function name: timeval_create + * Description: Initialize and return timeval structure. + * Arguments: tv_sec - seconds + * tv_usec - microseconds + * Returns: Initialized timeval structure. + */ + +struct timeval +timeval_create(long tv_sec, long tv_usec) +{ + struct timeval tmp; + tmp.tv_sec = tv_sec; + tmp.tv_usec = tv_usec; + return tmp; +} + +/* + * Function name: timeval_compare + * Description: Compares two pointers to timeval structures. + * Arguments: first - the first timeval structure to compare + * second - the second timeval structure to compare + * Returns: -1 - the second structure is bigger + * 0 - structures are equals + * 1 - the first structure is bigger + */ + +int +timeval_compare(struct timeval* first, struct timeval* second) +{ + if (first == NULL) { + if (second == NULL) { + return 0; + } + else { + return -1; + } + } + if (second == NULL) { + return 1; + } + if (first->tv_sec < second->tv_sec) { + return -1; + } + if (first->tv_sec > second->tv_sec) { + return 1; + } + if (first->tv_usec < second->tv_usec) { + return -1; + } + if (first->tv_usec > second->tv_usec) { + return 1; + } + return 0; +} + +/* + * Function name: timeval_subtract + * Description: Substracts second timeval structure from the first, updating the latter one. + * Arguments: first - the first timeval structure to subtract operation + * second - the second timeval structure to subtract operation + * Returns: 0 - success, + * 1 - failure. + */ + +int +timeval_subtract(struct timeval* first, struct timeval* second) +{ + assert(first != NULL); + assert(second != NULL); + if ((first == NULL) || (second == NULL)) { + return 1; + } + if (first->tv_usec < second->tv_usec) { + first->tv_sec -= 1; + first->tv_usec = 1000000 - second->tv_usec + first->tv_usec; + } + else { + first->tv_usec -= second->tv_usec; + } + first->tv_sec -= second->tv_sec; + return 0; +} + +/* + * Function name: timeval_lq_zero + * Description: Checks if the timer is less or equiv zero. + * Arguments: timer - the timeval structure to check + * Returns: 1 - the timer is less or equiv zero, + * 0 - the timer is bigger than zero. + */ + +int +timeval_lq_zero(struct timeval* timer) +{ + assert(timer != NULL); + if (timer == NULL) { + return 0; + } + if (timer->tv_sec < 0) { + return 1; + } + if ((timer->tv_sec == 0) && (timer->tv_usec == 0)) { + return 1; + } + return 0; +} diff --git a/src/timeval_functions.h b/src/timeval_functions.h new file mode 100644 index 0000000..52b1582 --- /dev/null +++ b/src/timeval_functions.h @@ -0,0 +1,32 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_TIMEVAL_FUNCTIONS_H +#define _JS_TIMEVAL_FUNCTIONS_H + +#include <sys/time.h> + +struct timeval timeval_create(long tv_sec, long tv_usec); +int timeval_compare(struct timeval* first, struct timeval* second); +int timeval_subtract(struct timeval* first, struct timeval* second); +int timeval_lq_zero(struct timeval* timer); + +#endif + diff --git a/src/usage.c b/src/usage.c new file mode 100644 index 0000000..08a85b8 --- /dev/null +++ b/src/usage.c @@ -0,0 +1,227 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <stdio.h> +#include <stdlib.h> +#include <assert.h> + +#include "usage.h" +#include "network.h" + +/* + * Function name: server_short_usage + * Description: Prints the short usage of the afserver. + * Arguments: info - the text printed in the first line + */ + +void +server_short_usage(char* info) +{ + assert(info != NULL); + printf("\n%s\n\n\n", info); + printf("Try `afserver --help' for more information.\n"); + + exit(1); +} + +/* + * Function name: server_long_usage + * Description: Prints the long usage of the afserver. + * Arguments: info - the text printed in the first line + */ + +void +server_long_usage(char* info) +{ + assert(info != NULL); + printf("\n%s\n\n\n", info); + printf(" Basic options:\n\n"); + printf(" -n, --hostname - it's used when creating listening sockets\n"); + printf(" (default: '')\n"); + printf(" -l, --listenport - listening [host:]port - users connect to it\n"); + printf(" (default: 50127)\n"); + printf(" -m, --manageport - manage [host:]port - afclient connects to it\n"); + printf(" (default: 50126)\n"); + printf(" -V, --version - display version number\n"); + printf(" -h, --help - prints this help\n\n"); + printf(" Authorization:\n\n"); + printf(" --pass - set the password used for client identification\n"); + printf(" (default: no password)\n\n"); + printf(" Configuration:\n\n"); + printf(" -c, --cerfile - the name of the file with certificate\n"); + printf(" (default: server-cert.pem)\n"); + printf(" -A, --cacerfile - the name of the file with CA certificates\n"); + printf(" (if used, require clients to have valid certificates)\n"); + printf(" -d, --cerdepth - the maximum depth of valid certificate-chains\n"); + printf(" -k, --keyfile - the name of the file with RSA key (default: server.rsa)\n"); + printf(" -f, --cfgfile - the name of the file with the configuration for the\n"); + printf(" active forwarder (server)\n"); + printf(" -D, --dateformat - format of the date printed in logs (see 'man strftime'\n"); + printf(" for details) (default: %%Y-%%m-%%d %%H:%%M:%%S)\n"); + printf(" -t, --timeout - the timeout value for the client's connection\n"); + printf(" (default: 5)\n"); + printf(" --maxidle - the maximum idle time for the client's connection\n"); + printf(" (default: disabled)\n"); + printf(" -u, --users - the amount of users allowed to use this server\n"); + printf(" (default: 5)\n"); + printf(" -C, --clients - the number of allowed clients to use this server\n"); + printf(" (default: 1)\n"); + printf(" -r, --realm - set the realm name (default: none)\n"); + printf(" -R, --raclients - the number of allowed clients in remote administration\n"); + printf(" mode to use this server (default: 1)\n"); + printf(" -U, --usrpcli - the number of allowed users per client (default: $users)\n"); + printf(" -M, --climode - strategy used to connect users with clients (default: 1)\n"); + printf(" Available strategies:\n"); + printf(" 1. fill first client before go to next\n\n"); + printf(" -p, --proto - type of server (tcp|udp) - what protocol it will be\n"); + printf(" operating for (default: tcp)\n"); + printf(" -b, --baseport - listenports are temporary and differ for each client\n"); + printf(" -a, --audit - additional information about connections are logged\n"); + printf(" --nossl - ssl is not used to transfer data (but it's still used\n"); + printf(" to establish a connection) (default: ssl is used)\n"); + printf(" --nozlib - zlib is not used to compress data (default: zlib is\n"); + printf(" used)\n"); + printf(" --dnslookups - try to obtain dns names of the computers rather than\n"); + printf(" their numeric IP\n\n"); + printf(" Logging:\n\n"); + printf(" -o, --log - log choosen information to file/socket\n"); + printf(" -v, --verbose - to be verbose - program won't enter the daemon mode\n"); + printf(" (use several times for greater effect)\n\n"); +#ifdef AF_INET6 + printf(" IP family:\n\n"); + printf(" -4, --ipv4 - use ipv4 only\n"); + printf(" -6, --ipv6 - use ipv6 only\n\n"); +#endif +#ifdef HAVE_LIBPTHREAD + printf(" HTTP PROXY:\n\n"); + printf(" -P, --enableproxy - enable http proxy mode\n\n"); + /* FIXME: afclient is always trying to get http page, so this option is not needed now + printf(" -S, --use-https - use https proxy instead of http proxy. '-P' option\n"); + printf(" will be set implicitly\n\n"); + */ +#endif + + exit(0); +} + +/* + * Function name: client_short_usage + * Description: Prints the short usage of the afclient. + * Arguments: info - the text printed in the first line + */ + +void +client_short_usage(char* info) +{ + assert(info != NULL); + printf("\n%s\n\n\n", info); + printf("Try `afclient --help' for more information.\n"); + + exit(1); +} + +/* + * Function name: client_long_usage + * Description: Prints the long usage of the afclient. + * Arguments: info - the text printed in the first line + */ + +void +client_long_usage(char* info) +{ + assert(info != NULL); + printf("\n%s\n\n\n", info); + printf(" Basic options:\n\n"); + printf(" -n, --servername - where the second part of the active\n"); + printf(" port forwarder is running (required)\n"); + printf(" -m, --manageport - manage port number - server must be\n"); + printf(" listening on it (default: 50126)\n"); + printf(" -d, --hostname - the name of this host/remote host - the final\n"); + printf(" destination of the packets (default: the name\n"); + printf(" returned by hostname function)\n"); + printf(" -p, --portnum - the port we are forwarding connection to (required)\n"); + printf(" --localname - local machine name for connection with afserver\n"); + printf(" (used to bind socket to different interfaces)\n"); + printf(" --localport - local port name for connection with afserver\n"); + printf(" (used to bind socket to different addressees)\n"); + printf(" --localdesname - local machine name for connections with destination\n"); + printf(" application (used to bind socket to different interfaces)\n"); + printf(" -V, --version - display version number\n"); + printf(" -h, --help - prints this help\n\n"); + printf(" Authorization:\n\n"); + printf(" -i, --id - sends the id string to afserver\n"); + printf(" --pass - set the password used for client identification\n"); + printf(" (default: no password)\n"); + printf(" --ignorepkeys - ignore invalid server's public keys\n\n"); + printf(" Configuration:\n\n"); + printf(" -k, --keyfile - the name of the file with RSA key (default: client.rsa)\n"); + printf(" -c, --cerfile - the name of the file with certificate\n"); + printf(" (default: no certificate used)\n"); + printf(" -f, --cfgfile - the name of the file with the configuration for the\n"); + printf(" active forwarder (client)\n"); + printf(" -s, --storefile - the name of the file with stored public keys\n"); + printf(" (default: known_hosts)\n"); + printf(" -D, --dateformat - format of the date printed in logs (see 'man strftime'\n"); + printf(" for details) (default: %%Y-%%m-%%d %%H:%%M:%%S)\n"); + printf(" -K, --keep-alive N - send keepalive packets every N seconds\n"); + printf(" (default: not send keepalive packets)\n\n"); + printf(" Auto-reconnection:\n\n"); + printf(" --ar-start - enable auto-reconnection when afserver is not\n"); + printf(" reachable on start (default: disabled)\n"); + printf(" --ar-quit - enable auto-reconnection after normal afserver quit\n"); + printf(" (default: disabled)\n"); + printf(" --noar - disable auto-reconnection after premature afserver\n"); + printf(" quit (default: enabled)\n"); + printf(" -A, --ar-tries N - try N times to reconnect (default: unlimited)\n"); + printf(" -T, --ar-delay N - wait N seconds between reconnect tries (default: 5)\n\n"); + printf(" Modes:\n\n"); + printf(" -u, --udpmode - udp mode - client will use udp protocol to\n"); + printf(" communicate with the hostname:portnum\n"); + printf(" -U, --reverseudp - reverse udp forwarding. Udp packets will be forwarded\n"); + printf(" from hostname:portnum to the server name:manageport\n"); + printf(" -r, --remoteadmin - remote administration mode. (using '-p #port' will\n"); + printf(" force afclient to use port rather than stdin-stdout)\n\n"); + printf(" Logging:\n\n"); + printf(" -o, --log - log choosen information to file/socket\n"); + printf(" -v, --verbose - to be verbose - program won't enter the daemon mode\n"); + printf(" (use several times for greater effect)\n\n"); +#ifdef AF_INET6 + printf(" IP family:\n\n"); + printf(" -4, --ipv4 - use ipv4 only\n"); + printf(" -6, --ipv6 - use ipv6 only\n\n"); +#endif +#ifdef HAVE_LIBDL + printf(" Modules:\n\n"); + printf(" -l, --load - load a module for user's packets filtering\n"); + printf(" -L, --Load - load a module for service's packets filtering\n\n"); +#endif +#ifdef HAVE_LIBPTHREAD + printf(" HTTP/HTTPS PROXY:\n\n"); + printf(" -S, --use-https - use https proxy instead of http proxy\n"); + printf(" -P, --proxyname - the name of the machine with proxy server\n"); + printf(" -X, --proxyport - the port used by proxy server (default: 8080)\n"); + printf(" -C, --pa-cred U:P - the user (U) and password (P) used in proxy\n"); + printf(" authorization\n"); + printf(" -B, --pa-t-basic - the Basic type of proxy authorization (default)\n\n"); +#endif + + exit(0); +} diff --git a/src/usage.h b/src/usage.h new file mode 100644 index 0000000..eded3fd --- /dev/null +++ b/src/usage.h @@ -0,0 +1,30 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _JS_USAGE_H +#define _JS_USAGE_H + +void server_short_usage(char* info); /* short usage info printed by afserver */ +void server_long_usage(char* info); /* long usage info printed by afserver */ +void client_short_usage(char* info); /* short usage info printed by afclient */ +void client_long_usage(char* info); /* long usage info printed by afclient */ + +#endif + diff --git a/src/user_stats_struct.c b/src/user_stats_struct.c new file mode 100644 index 0000000..0df384c --- /dev/null +++ b/src/user_stats_struct.c @@ -0,0 +1,391 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <time.h> +#include <assert.h> + +#include "user_stats_struct.h" + +/* + * Function name: UserStats_new + * Descriotion: Create and initialize new UserStats structure. + * Returns: Pointer to newly created UserStats structure. + */ + +UserStats* +UserStats_new() +{ + UserStats* tmp = calloc(1, sizeof(UserStats)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: UserStats_free + * Description: Free the memory allocated for UserStats structure. + * Arguments: us - pointer to pointer to UserStats structure + */ + +void +UserStats_free(UserStats** us) +{ + assert(us != NULL); + if (us == NULL) { + return; + } + assert((*us) != NULL); + if ((*us) == NULL) { + return; + } + free((*us)); + (*us) = NULL; +} + +/* + * Function name: UserStats_set_lastActivity + * Description: Set time of the last user activity (upload or download). + * Arguments: us - pointer to UserStats structure + * lastActivity - time of the last user activity + */ + +void +UserStats_set_lastActivity(UserStats* us, time_t lastActivity) +{ + assert(us != NULL); + if (us == NULL) { + return; + } + us->lastActivity = lastActivity; +} + +/* + * Function name: UserStats_set_totalDownloadedBytes + * Description: Set total amount of downloaded bytes by the user. + * Arguments: us - pointer to UserStats structure + * totalDownloadedBytes - total amount of downloaded bytes by the user + */ + +void +UserStats_set_totalDownloadedBytes(UserStats* us, int totalDownloadedBytes) +{ + assert(us != NULL); + if (us == NULL) { + return; + } + us->totalDownloadedBytes = totalDownloadedBytes; +} + +/* + * Function name: UserStats_set_totalUploadedBytes + * Description: Set total amount of uploaded byte by the user. + * Arguments: us - pointer to UserStats structure + * totalUploadedBytes - total amount of uploaded bytes by the user + */ + +void +UserStats_set_totalUploadedBytes(UserStats* us, int totalUploadedBytes) +{ + assert(us != NULL); + if (us == NULL) { + return; + } + us->totalUploadedBytes = totalUploadedBytes; +} + +/* + * Function name: UserStats_get_lastActivity + * Description: Get time of the last user activity (upload or download). + * Arguments: us - pointer to UserStats structure + * Returns: Time of the last user activity. + */ + +time_t +UserStats_get_lastActivity(UserStats* us) +{ + assert(us != NULL); + if (us == NULL) { + return 0; + } + return us->lastActivity; +} + +/* + * Function name: UserStats_get_totalDownloadedBytes + * Description: Get total amount of downloaded bytes by the user. + * Arguments: us - pointer to UserStats structure + * Returns: Total amount of downloaded bytes by the user. + */ + +int +UserStats_get_totalDownloadedBytes(UserStats* us) +{ + assert(us != NULL); + if (us == NULL) { + return 0; + } + return us->totalDownloadedBytes; +} + +/* + * Function name: UserStats_get_totalUploadedBytes + * Description: Get total amount of uploaded bytes by the user. + * Arguments: us - pointer to UserStats structure + * Returns: Total amount of uploaded bytes by the user. + */ + +int +UserStats_get_totalUploadedBytes(UserStats* us) +{ + assert(us != NULL); + if (us == NULL) { + return 0; + } + return us->totalUploadedBytes; +} + +/* + * Function name: UserStats_add_download + * Description: Add bytes to the totalDownloadedBytes, update the lastActivity + * and downloadSpeed. + * Arguments: us - pointer to UserStats structure + * bytes - amount of bytes to add + */ + +void +UserStats_add_download(UserStats* us, int bytes) +{ + time_t now; + + assert(us != NULL); + + if (us == NULL) { + return; + } + + /* get the current time */ + time(&now); + + /* update counters */ + switch (now - us->lastDSQChange) { + case 0: { + us->downloadSpeedQueue[us->downloadSQP] += bytes; + break; + } + case 2: { + us->downloadSQP = (us->downloadSQP + 1) % 3; + us->downloadSpeedQueue[us->downloadSQP] = 0; + } + case 1: { + us->downloadSQP = (us->downloadSQP + 1) % 3; + us->downloadSpeedQueue[us->downloadSQP] = bytes; + break; + } + default: { + us->downloadSpeedQueue[0] = us->downloadSpeedQueue[1] = us->downloadSpeedQueue[2] = 0; + us->downloadSpeedQueue[us->downloadSQP] = bytes; + } + } + + /* update total upload */ + us->totalDownloadedBytes += bytes; + + /* update last activity */ + us->lastActivity = now; + + /* update last speed queue change */ + us->lastDSQChange = now; +} + +/* + * Function name: UserStats_add_upload + * Description: Add bytes to the totalUploadedBytes, update the lastActivity + * and uploadSpeed. + * Arguments: us - pointer to UserStats structure + * bytes - amount of bytes to add + */ + +void +UserStats_add_upload(UserStats* us, int bytes) +{ + time_t now; + + assert(us != NULL); + + if (us == NULL) { + return; + } + + /* get the current time */ + time(&now); + + /* update counters */ + switch (now - us->lastUSQChange) { + case 0: { + us->uploadSpeedQueue[us->uploadSQP] += bytes; + break; + } + case 2: { + us->uploadSQP = (us->uploadSQP + 1) % 3; + us->uploadSpeedQueue[us->uploadSQP] = 0; + } + case 1: { + us->uploadSQP = (us->uploadSQP + 1) % 3; + us->uploadSpeedQueue[us->uploadSQP] = bytes; + break; + } + default: { + us->uploadSpeedQueue[0] = us->uploadSpeedQueue[1] = us->uploadSpeedQueue[2] = 0; + us->uploadSpeedQueue[us->uploadSQP] = bytes; + } + } + + /* update total upload */ + us->totalUploadedBytes += bytes; + + /* update last activity */ + us->lastActivity = now; + + /* update last speed queue change */ + us->lastUSQChange = now; +} + +/* + * Function name: UserStats_get_downloadSpeed + * Description: Get the average download speed from the last three seconds. + * Arguments: us - pointer to UserStats structure + * Returns: The average download speed from the last three seconds. + */ + +double +UserStats_get_downloadSpeed(UserStats* us) +{ + time_t now; + + assert(us != NULL); + + if (us == NULL) { + return 0.0; + } + + /* get the current time */ + time(&now); + + /* update pointer */ + switch (now - us->lastDSQChange) { + case 0: { + break; + } + case 2: { + us->downloadSQP = (us->downloadSQP + 1) % 3; + us->downloadSpeedQueue[us->downloadSQP] = 0; + } + case 1: { + us->downloadSQP = (us->downloadSQP + 1) % 3; + us->downloadSpeedQueue[us->downloadSQP] = 0; + break; + } + default: { + us->downloadSpeedQueue[0] = us->downloadSpeedQueue[1] = us->downloadSpeedQueue[2] = 0; + } + } + + /* update last speed queue change */ + us->lastDSQChange = now; + + /* return current download speed */ + return (((double)(us->downloadSpeedQueue[0] + us->downloadSpeedQueue[1] + us->downloadSpeedQueue[2])) / 3.0); +} + +/* + * Function name: UserStats_get_uploadSpeed + * Description: Get the average upload speed from the last three seconds. + * Arguments: us - pointer to UserStats structure + * Returns: The average upload speed from the last three seconds. + */ + +double +UserStats_get_uploadSpeed(UserStats* us) +{ + time_t now; + + assert(us != NULL); + + if (us == NULL) { + return 0.0; + } + + /* get the current time */ + time(&now); + + /* update pointer */ + switch (now - us->lastUSQChange) { + case 0: { + break; + } + case 2: { + us->uploadSQP = (us->uploadSQP + 1) % 3; + us->uploadSpeedQueue[us->uploadSQP] = 0; + } + case 1: { + us->uploadSQP = (us->uploadSQP + 1) % 3; + us->uploadSpeedQueue[us->uploadSQP] = 0; + break; + } + default: { + us->uploadSpeedQueue[0] = us->uploadSpeedQueue[1] = us->uploadSpeedQueue[2] = 0; + } + } + + /* update last speed queue change */ + us->lastUSQChange = now; + + /* return current download speed */ + return (((double)(us->uploadSpeedQueue[0] + us->uploadSpeedQueue[1] + us->uploadSpeedQueue[2])) / 3.0); +} + +/* + * Function name: UserStats_clear + * Description: Clear the UserStats structure. Set all variables to default values. + * Arguments: us - pointer to UserStats structure + */ + +void +UserStats_clear(UserStats* us) +{ + assert(us != NULL); + if (us == NULL) { + return; + } + us->lastActivity = 0; + us->lastUSQChange = 0; + us->lastDSQChange = 0; + us->totalDownloadedBytes = 0; + us->totalUploadedBytes = 0; + us->uploadSQP = 0; + us->uploadSpeedQueue[0] = us->uploadSpeedQueue[1] = us->uploadSpeedQueue[2] = 0; + us->downloadSQP = 0; + us->downloadSpeedQueue[0] = us->downloadSpeedQueue[1] = us->downloadSpeedQueue[2] = 0; +} diff --git a/src/user_stats_struct.h b/src/user_stats_struct.h new file mode 100644 index 0000000..dc33dd4 --- /dev/null +++ b/src/user_stats_struct.h @@ -0,0 +1,59 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_USER_STATS_STRUCT_H +#define _JS_USER_STATS_STRUCT_H + +#include <sys/types.h> + +typedef struct { + time_t lastActivity; + time_t lastUSQChange; + time_t lastDSQChange; + int totalDownloadedBytes; + int totalUploadedBytes; + int uploadSQP; + int uploadSpeedQueue[3]; + int downloadSQP; + int downloadSpeedQueue[3]; +} UserStats; + +/* 'constructor' */ +UserStats* UserStats_new(); +/* 'destructor' */ +void UserStats_free(UserStats** us); +/* setters */ +void UserStats_set_lastActivity(UserStats* us, time_t lastActivity); +void UserStats_set_totalDownloadedBytes(UserStats* us, int totalDownloadedBytes); +void UserStats_set_totalUploadedBytes(UserStats* us, int totalUploadedBytes); +/* getters */ +time_t UserStats_get_lastActivity(UserStats* us); +int UserStats_get_totalDownloadedBytes(UserStats* us); +int UserStats_get_totalUploadedBytes(UserStats* us); +/* other methods */ +void UserStats_add_download(UserStats* us, int bytes); +void UserStats_add_upload(UserStats* us, int bytes); +double UserStats_get_downloadSpeed(UserStats* us); +double UserStats_get_uploadSpeed(UserStats* us); +/* other */ +void UserStats_clear(UserStats* us); + +#endif diff --git a/src/usernames.c b/src/usernames.c new file mode 100644 index 0000000..4f0b14d --- /dev/null +++ b/src/usernames.c @@ -0,0 +1,63 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> +#include <assert.h> + +#include "usernames.h" + +/* + * Function name: get_username + * Description: Returns the id of the user. + * Arguments: pointer - the server realm + * user - the number of the user + * Returns: The id of the user. + */ + +int +get_username(ServerRealm* pointer, int user) +{ + assert(pointer != NULL); + return ConnectUser_get_userId(ServerRealm_get_usersTable(pointer)[user]); +} + +/* + * Function name: get_usernumber + * Description: Returns the number of the user. + * Arguments: pointer - the server realm + * user - the id of the user + * Returns: The number of the user. + */ + +int +get_usernumber(ServerRealm* pointer, int userid) +{ + int i; + + assert(pointer != NULL); + + for (i = 0; i < ServerRealm_get_usersLimit(pointer); ++i) { + if (userid == ConnectUser_get_userId(ServerRealm_get_usersTable(pointer)[i])) { + return i; + } + } + + return -1; +} diff --git a/src/usernames.h b/src/usernames.h new file mode 100644 index 0000000..d7f358f --- /dev/null +++ b/src/usernames.h @@ -0,0 +1,31 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include "activefor.h" +#include "server_realm_struct.h" + +#ifndef _JS_USERNAMES_H +#define _JS_USERNAMES_H + +int get_username(ServerRealm*, int); +int get_usernumber(ServerRealm*, int); + +#endif + diff --git a/src/usr_cli_struct.c b/src/usr_cli_struct.c new file mode 100644 index 0000000..439fb62 --- /dev/null +++ b/src/usr_cli_struct.c @@ -0,0 +1,299 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <config.h> + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "usr_cli_struct.h" +#include "string_functions.h" + +/* + * Function name: UsrCli_new + * Description: Create and initialize new UsrCli structure. + * Returns: Newly created UsrCli structure. + */ + +UsrCli* +UsrCli_new() +{ + UsrCli* tmp = calloc(1, sizeof(UsrCli)); + assert(tmp != NULL); + if (tmp == NULL) { + return NULL; + } + return tmp; +} + +/* + * Function name: UsrCli_free + * Description: Free the memory allocated for UsrCli structure. + * Arguments: uc - pointer to pointer to UsrCli structure + */ + +void +UsrCli_free(UsrCli** uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return; + } + assert((*uc) != NULL); + if ((*uc) == NULL) { + return; + } + if ((*uc)->listenPortName) { + free((*uc)->listenPortName); + (*uc)->listenPortName = NULL; + } + if ((*uc)->managePortName) { + free((*uc)->managePortName); + (*uc)->managePortName = NULL; + } + free((*uc)); + (*uc) = NULL; +} + +/* Function name: UsrCli_set_listenPortName + * Description: Set listen port name. + * Arguments: uc - pointer to UsrCli structure + * listenPortName - listen port name + */ + +void +UsrCli_set_listenPortName(UsrCli* uc, char* listenPortName) +{ + char* tmp; + + assert(uc != NULL); + + if (uc == NULL) { + return; + } + if ((tmp = rindex(listenPortName, ':')) != NULL) { + (*tmp) = 0; + ++tmp; + string_cp(&(uc->listenHostName), listenPortName); + string_cp(&(uc->listenPortName), tmp); + } + else { + string_cp(&(uc->listenPortName), listenPortName); + } +} + +/* + * Function name: UsrCli_set_managePortName + * Description: Set manage port name. + * Arguments: uc - pointer to UsrCli structure + * managePortName - manage port name + */ + +void +UsrCli_set_managePortName(UsrCli* uc, char* managePortName) +{ + char* tmp; + + assert(uc != NULL); + + if (uc == NULL) { + return; + } + if ((tmp = rindex(managePortName, ':')) != NULL) { + (*tmp) = 0; + ++tmp; + string_cp(&(uc->manageHostName), managePortName); + string_cp(&(uc->managePortName), tmp); + } + else { + string_cp(&(uc->managePortName), managePortName); + } +} + +/* + * Function name: UsrCli_set_listenFd + * Description: Set listen file descriptor. + * Arguments: uc - pointer to UsrCli structure + * listenFd - listen file descriptor + */ + +void +UsrCli_set_listenFd(UsrCli* uc, int listenFd) +{ + assert(uc != NULL); + if (uc == NULL) { + return; + } + uc->listenFd = listenFd; +} + +/* + * Function name: UsrCli_set_manageFd + * Description: Set manage file descriptor. + * Arguments: uc - pointer to UsrCli structure + * manageFd - manage file descriptor + */ + +void +UsrCli_set_manageFd(UsrCli* uc, int manageFd) +{ + assert(uc != NULL); + if (uc == NULL) { + return; + } + uc->manageFd = manageFd; +} + +/* + * Function name: UsrCli_set_number + * Description: Sets the UsrCli number in the structures connected with manage port. + * Arguments: uc - pointer to UsrCli structure + * number - the number of the UsrCli structure + */ + +void +UsrCli_set_number(UsrCli* uc, int number) +{ + assert(uc != NULL); + assert(number >= 0); + if (uc == NULL) { + return; + } + uc->number = number; +} + +/* Function name: UsrCli_get_listenPortName + * Description: Get listen port name. + * Arguments: uc - pointer to UsrCli structure + * Returns: Listen port name. + */ + +char* +UsrCli_get_listenPortName(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return NULL; + } + return uc->listenPortName; +} + +/* + * Function name: UsrCli_get_managePortName + * Description: Get manage port name. + * Arguments: uc - pointer to UsrCli structure + * Returns: Manage port name. + */ + +char* +UsrCli_get_managePortName(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return NULL; + } + return uc->managePortName; +} + +/* + * Function name: UsrCli_get_listenFd + * Description: Get listen file descriptor. + * Arguments: uc - pointer to UsrCli structure + * Returns: Listen file descriptor. + */ + +int +UsrCli_get_listenFd(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return -1; + } + return uc->listenFd; +} + +/* + * Function name: UsrCli_get_manageFd + * Description: Get manage file descriptor. + * Arguments: uc - pointer to UsrCli structure + * Returns: Manage file desciptor. + */ + +int +UsrCli_get_manageFd(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return -1; + } + return uc->manageFd; +} + +/* + * Function name: UsrCli_get_listenHostName + * Description: Get host name used for listenFd in ip_connect function or NULL, if not set. + * Arguments: uc - pointer to UsrCli structure + * Returns: Host name used for listenFd in ip_connect function or NULL, if not set. + */ + +char* +UsrCli_get_listenHostName(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return NULL; + } + return uc->listenHostName; +} + +/* + * Function name: UsrCli_get_manageHostName + * Description: Get host name used for manageFd in ip_connect function or NULL, if not set. + * Arguments: uc - pointer to UsrCli structure + * Returns: Host name used for manageFd in ip_connect function or NULL, if not set. + */ + +char* +UsrCli_get_manageHostName(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return NULL; + } + return uc->manageHostName; +} + +/* + * Function name: UsrCli_get_number + * Description: Gets the number of the UsrCli structure. + * Arguments: uc - pointer to UsrCli structure + * Returns: The number of the UsrCli structure. + */ + +int +UsrCli_get_number(UsrCli* uc) +{ + assert(uc != NULL); + if (uc == NULL) { + return -1; + } + return uc->number; +} diff --git a/src/usr_cli_struct.h b/src/usr_cli_struct.h new file mode 100644 index 0000000..ddbbe97 --- /dev/null +++ b/src/usr_cli_struct.h @@ -0,0 +1,54 @@ +/* + * active port forwarder - software for secure forwarding + * Copyright (C) 2003-2007 jeremian <jeremian [at] poczta.fm> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + + +#ifndef _JS_USR_CLI_STRUCT_H +#define _JS_USR_CLI_STRUCT_H + +typedef struct { + char* listenHostName; + char* manageHostName; + char* listenPortName; + char* managePortName; + int listenFd; + int manageFd; + int number; +} UsrCli; + +/* 'constructor' */ +UsrCli* UsrCli_new(); +/* 'destructor' */ +void UsrCli_free(UsrCli** uc); +/* setters */ +void UsrCli_set_listenPortName(UsrCli* uc, char* listenPortName); +void UsrCli_set_managePortName(UsrCli* uc, char* managePortName); +void UsrCli_set_listenFd(UsrCli* uc, int listenFd); +void UsrCli_set_manageFd(UsrCli* uc, int manageFd); +void UsrCli_set_number(UsrCli* uc, int number); +/* getters */ +char* UsrCli_get_listenPortName(UsrCli* uc); +char* UsrCli_get_managePortName(UsrCli* uc); +int UsrCli_get_listenFd(UsrCli* uc); +int UsrCli_get_manageFd(UsrCli* uc); +char* UsrCli_get_listenHostName(UsrCli* uc); +char* UsrCli_get_manageHostName(UsrCli* uc); +int UsrCli_get_number(UsrCli* uc); + +#endif diff --git a/stamp-h.in b/stamp-h.in new file mode 100644 index 0000000..9788f70 --- /dev/null +++ b/stamp-h.in @@ -0,0 +1 @@ +timestamp |